Cannot read Windows dialog boxes.

Similar Questions

• "MB Ethernet Slave Demon.vi" connection lost when opening a windows dialog box in my application

  Hello everyone,

  I am currently working on a LabVIEW application that communicates with a PLC using a Modbus Protocol (with an ethernet cable). The PLC is the master and the PC is the slave.

  The code is based on the Modbus of LabVIEW examples: "MB Ethernet example Master.vi, MB Ethernet example Slave.vi and MB Ethernet slave Demon.vi. It is not the first time I use it.

  But I recently discovered a problem. In my application, I have a pop-up with a button that opens a windows dialog box to select a result file.

  When the windows dialog box opens, the "MB Ethernet Slave Demon.vi" crashes (I put a meter inside to see what happened and it stops at the moment opens the dialog box), then when I close the dialog box, the counter continues to count, the connection ID is empty, and the number of the demon slave VI connection resets to 0. When communication is re-established between the PC and PLC (like 10 seconds after the closure of the dialog box), the number of connection go to 1 and table of login ID is no longer empty.

  Otherwise, the communication works very well. But not when the dialog box opens and is a significant problem for me because the user must be able to open results file during production that needs the Modbus communication at work because it's the controller who gives orders the computer to run the production cycle.

  Thanks in advance for your help.

  If you think that the problem is inside the library NI Modbus (old), why don't you use the most recent which is available on the network of tools? Link is here: https://decibel.ni.com/content/docs/DOC-30140

  Looking into some of the screws in the library, she uses methods of Server VI as "Run a VI" that will perform the loop of the root, as it crashes while the file dialog is open. I suspect that the new version of the library is not the problem.

• How to call windows dialog boxes

  Hello

  I just want to know how to call a windows dialog box, I called below the dialog using VB script and the script is the following lol = msgbox ("Your Message here", 19, "Your title here") and save it as a .vbs file, by changing the number "19" in the script to generate the different dialog box. And I think it is called by the user32.dl of windows.

  So can you please help me to call the dialog even in labview.

  

  Thank you & best regards

  Samuel J

  System engineer

  CAPTRONIC systems Pvt Ltd

  Bangalore, India.

  See attached VI calling MessageBoxA from user32.dll. Sorry for french labels, comments and the description...

• Cannot resize the dialog box print too large

  When you try to print using Reader X, the print dialog box is huge and the 'OK' button extends above the bottom, making it inaccessible.  I tried to resize the print area, but the handles that appear around the edges will not adjust the size of the box.  In this case no matter the size of the player window with which I work.

  Someone else runs into this problem? No idea how to solve this problem?

  I use a screen resolution of 1024 x 768.

  Thank you.

  On computers with low resolution, such as 800 X 600, the print and Cancel buttons may be off the screen. The 10.1.3 free update for Reader and Acrobat addresses this issue. You can install this update automatically to in Reader and Acrobat. If you are unable to update at this time, do one of the following:

  • Drag the scroll bar on the right side of the print dialog box down to access keys.
  • To print, press enter or return.
  • To cancel, press ESC.

  This information has been made of article following the base of knowledge print issues. Acrobat, Reader 10.1.2 or later.

• Portege R100: CDROM USB cannot read Windows XP CD installation

  I download disk recovery and the start of my external USB CDROM drive successfully.
  Unfortunately, the USB CDROM driver cannot read my Windows XP CD installation that does not have the Toshiba Recovery CD. Product error (wrong damaged CD-ROM, please insert Recovery CD #1).

  Hello

  As far as I know you have a taken in charge and compatible CD/DVD external climb to boot from the CD.
  Do you use this car?

  Please check these discussions:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=19232&MessageID=70382

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=8991&MessageID=31246

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=17323&MessageID=63247

  good luck ;)

• suggestion of the cancellation by programming the windows dialog boxes

  For some reason, while a utility that downloads the firmware in a device should be stopped. When using Taskkill mode forced to the command prompt (suggested here in this forum in another thread), the app closed, but the device does not respond properly (it is the poster of device firmware download is still in progress). To avoid this problem when you use taskkill in normal mode (no forced mode), utility like popups display messages "are you sure you want to download the process? Press Yes or no. ». Then when you press Yes it still displays a message to the user, "the firmware download process abandoned by the user.". The utility that downloads the firmware can be redesigned to avoid these pop-up windows, but it is a bit tedious process and is not possible at this time. Taskkill in forced mode also left aside.

  To do some automation, only option is to use taskkill in normal mode and must avoid the dialog boxes for "popup".

  Thanks in advance for any suggestions,

  Mathan

  Hi Mike,.

  You can use PostMassage to send events.

  See these links please

  http://msdn.Microsoft.com/en-us/library/bb775985 (vs.85) .aspx

  http://msdn.Microsoft.com/en-us/library/ms644944 (vs.85) .aspx

  Mike

• Cannot access the dialog box when I right click

  I have a laptop with Vista Ultimate. Previously, I was able to right click on the desktop to access the dialog box. I can do it no longer. Can anyone provide a solution.

  To toggle to the current user

  Start > run > Regedit
  Goto registry key: HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer
  Modify/create the types of data accepted by value and value name (s) as described below.
  Data type: DWORD / / value name: NoViewContextMenu
  For value data: [0 = off / 1 = on]
  Restart and exit Registry

  To turn to Local computer

  [Start] [Run] [Regedit]
  The registry key: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\policies\Explorer
  Modify/create the types of data accepted by value and value name (s) as described below.
  Data type: DWORD / / value name: NoViewContextMenu
  For value data: [0 = off / 1 = on]
  Restart and exit Registry

• "Cannot find file" dialog box

  I get a dialog box after you start Win7 32-bit which indicates just that "cannot find file."

  He is obviously trying to load something but I have no idea what...

  Any ideas where it might come from?

  Is there a utility somewhere that shows this boot file is loaded?

  Thank you :-)

  This will do what you're after.

  Autoruns from Sysinternals

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

  I hope this helps.

• Cannot move Illustrator dialog boxes

  Abounds with frustration... I recently installed (updated) CS5.5.  Now I can not drag or move any dialog to the center of the application window.  It is a great source of frustration because I can't preview effects since the dialog boxes obscure work plans.  Does anyone have a solution for this disease?

  Yes, I've done all the hacks from normal (?) with the Illustrator AIPrefs file and Settings file (why these methods became so commonplace is a testament to poor software design).

  As I had previously assumed, I had to change settings between consoles admin NVidia and Matrox to cause Illustrator to behave nicely with dialog boxes. In particular, I had to instruct the video controller to replace the handling of application dialog box and now Illustrator behaves like CS5.5 cousins.

  These types of disparities between software applications from the same company are enough to make me stay in environment UNIX (Yes GIMP!).

  So for now, this incident is resolved.

• What about a required no program that floods the screen with their pop-up windows dialog box explaining why underwriters for their care antivirus

  It is impossible to use my XP computer.  If I click on an ICON to desktop, or any other program, nothing happens. In addition, the screen is filled with their pop-up dialog box. Yes, the block popups is turned on. Any program is selected, except Microsoft Outlook, a message topic infection arises.  "Care ANTIVIRUS SYSTEM" will fix everything if I sign up for their program. Already, I have several programs to do this, but right now can not get any. In the meantime, I'm dead in the water.  The XP system was working fine until this problem appeared. I can't help but think this is a deliberate attempt to acquire a new customer.  And if it is true, the company should be run out of business. Please help me.

  Take a look at the forum anti virus and malware.

  the malware even you have answers there.

• Cannot find the dialog box 'Create Slideshow '.

  I have the first Elements 7 and I'm trying to create a slideshow.  The help page refers to a dialog box 'Create Slideshow', but I don't see that anywhere.  I looked in all the menus, each icon and I tried right-clicking on the photos that were driven down to the timeline, but no slide show option.

  I did manually slideshows using PE7 before, but it's a big pain to have to manually set the duration of each slide, rather than changing the default sort.

  Thank you!

  Bennett

  There are actually four different ways to create slideshows in Premiere Elements, and I'll show you how to do each one in my books.

  But I think you are referring to the slideshow creator on the project Panel. To use it, select several images or clips in the project Panel (by selecting that you hold down the Ctrl or shift) and right click. This will open the Panel I think you are looking for.

• Satellite L505 - 14K - cannot read Windows key label CoA

  Hello.

  I have a Satellite L505 - 14K on which I need to reinstall Windows 7 Home Premium, but Windows key on the label is unreadable. Could I get a replacement for it?

  Also I can not read the HARD drive Windows code because it has been formatted before that I get this laptop in my hands...
  Maybe I can get either a phone number or e-mail address to a branch of Toshiba Polish, so I could communicate with them in this case?

  Thank you in advance.

  Hello

  Toshiba doesn't provide the keys to series for windows systems. On the label, you'll find the serial OEM key but this key cannot be used for activation of the system.
  Toshiba offers a clean recovery image that already contains the active Windows System.

  This recovery disk can be ordered here:
  http://backupmedia.Toshiba.EU/landing.aspx

• Cannot read Windows 7 OEM sticker and need to retrieve my CD key.

  I stuck my sticker by my way of thinking of table that is the safest place to place, but it seems that someone scratched the sticker. Is it possible that I can get back my cd key. And my Windows is genuine as well. Help someone.

  Unfortunately, you will need to purchase a new license, if your OEM sticker is missing.

  If your computer is pre-installed with Windows 7, you can use the reinstall Windows 7 without referencing the OEM product key:

  New computers coming often pre-installed with Windows 7 have what is called a recovery partition. This is used to reinstall an operating system in the case of a system failure. To access it, you need to start when you start your computer by pressing a function key. This can be either F1, F2, F9, F10, F11, F12 key DEL or tab. See the manual that came with your PC for instructions on how to reinstall Windows.

  If your recovery partition is not available or damaged, you must contact the manufacturer of your computer, and request that a defined recovery disk you can use to reinstall Windows 7. They could practice a small shipping and handling.

  ------------------------------------

  This is how the recovery partition is available for the most popular brands

  For Dell, press CTRL + F11 directly after switching on the device

  For HP, press F11 directly after switching on the device

  For Toshiba, press and hold "0" BEFORE and during the power upward

  For Acer, press and hold ALT + F10, as soon as you see the logo

  For Asus, press F9, as soon as you see the Asus logo.

  Advent, restart your computer. Then, press F10 repeatedly until the message "Starting system recovery"

  -----------------------------

  If its an OEM System Builder License and you had entered the product key, you can retrieve it:

  Here are four utilities, which can display your product keys if they are still there:
  Belarc Advisor: http://www.belarc.com/free_download.html
  (He did a good job of providing a wealth of information.)

  Also: http://www.magicaljellybean.com/keyfinder.shtml
  and: http://www.nirsoft.net/utils/product_cd_key_viewer.html
  and RockXP: http://www.majorgeeks.com/download4138.html which has additional features

• XP hangs at startup and the dialog box provides the following: a problem has prevented Windows to check exactly the State of this computer

  I am rebuilding a system that has been attacked by several viruses and had to rebuild XP using the Windows installation disc.  After completing the repair, I was greeted by the XP logon screen and I tried to log in as administrator. The standard screen grass-hill appears followed by a Windows dialog box to activate product indicating "a problem has prevented windows to check exactly the State of this computer.  To keep your copy of windows must be activated with Microsoft. You want to activate Windows now? "If I choose 'No', then Windows drives me back to the login screen.  If I choose "Yes" then Windows does nothing - activation does not occur and XP does not start... the system just hangs.   I also tried to open a session without failure, but he said that I could not activate safe mode and started back me to the login screen.  I am able to get to a command prompt, if I select Mode safe mode with prompt at startup.  FYI, I am able to view the structure of this version XP Directory when I configure the HARD disk as a slave on another system drive.  Any help to resolve this matter will be highly appreciated.

  I have exactly the same problem and after 2 days of searching and trying stuff found on the internet, I have solved this problem.

  At my computer configuration: Windows XP sp3 with IExplorer 8, but had to go back to the repair facility after that some system files have been corrupted, do not know why.
  My repair CD installation was: Windows XP sp2

  In my view, the main problem is that after the installation of repair, the system obtained in conflict of existing versions of IExplorer 7 and 8. IE 7 & 8A prevented the application of activation of MS (OOBE) of working after the installation of repair, the OOBE application silently chrashed and prevented the logon process.

  I couldn't connect even in safe mode, BUT with failure + command prompt, safe mode I managed to log on! So, choose the mode without failure + command promt in the trunk. Then open a session with success. Then close the command prompt and press CTRL + ALT + DEL to Task Manager. In task manager launches the new application "c:" and answer 'No' to the following question, and after an error message you c: drive open and you'll have office. You can close the System Restore Wizard who opened. Then go to c:\windows\ie7\spuninst and run spuninst.exe. Do the same to c:\windows\ie8\spuninst. After you have uninstalled both, restart windows, and after the first issue of activation, you should get the big activation dialog box.

  I have spent a lot more time, because I was told that uninstall IE7 and IE8 is possible to do this via the command prompt. I did, but it has not fixed my problem. Then I tried a thousand other tricks at the same time.

  Please let us now if this helped you.

• Windows Media Player 12 - Options (dialog box) / Rip music/change... button does not.

  I have not tried to copy a CD for a while (WMP 12.0.7600.16667) and today, when I tried to put the "rip music to this location" (the value is blank) the button 'change... '. "does not work.  (Visually) is the button to click, but the 'Find a file' dialog box does not appear.  If any of the settings in the dialog box are changed and you press the OK button, the following error message appears: "ripping settings could not be applied.  I was able to rip CDs in the past on this computer (Windows 7) without problem (finally made on May 27, 2010).  I have faithfully install all the recommended updates.  There has been no hardware changes.  iTunes will rip a CD without problem!  It acts as the standard connection 'Find a file' window dialog box has been lost by the player, or will not be activated for some reason any.  Any help would be greatly appreciated as I have a few new CD I want to extract and add to the music library.

  Thanks LoydN

  Saved my butt.  Has worked as you say.

  I spent hours trying to solve the problem.

  Why msft site has not answered the problem?