Cannot recognize the disk external Windows bootable

Similar Questions

• Satellite Pro 460CDX: how to get the BIOS to recognize the disk external drive port?

  How do you get the BIOS to recognize external floppy port?

  HEEE? ?:|
  Are you sure you know how to update the BIOS?

  Come on cheshire! The update of the BIOS is risky If you n t know how to do!
  Usually, you don't need additional software to recognize the USB FDD drive or driver!

  I hope you have downloaded the good BIOS and use the correct procedure to update BOS, because if you do this in the wrong way to damage the motherboard!
  It is important to first read the BIOS update guide lines! You can find it on the download page of the BIOS under more information

• Cannot start the disk of Windows 7.

  Install problem

  Hi ive been running an office in uk compaq pressario 2129 on vista premium now my hard drive is broken so I thought I could buy a new window 7 os and new WD green 500 GB 3.5 hard drive player sara so I installed the drive and ot appears on the bios, the bios are 5.16 there a 5.23 update so I changed the bios to boot from the drive put windows 7 DVD in the dvd player saved BIOS power off and restartednow all im left wirh is a white im screen do not get something like a promt to press any key to boot from the disc, any help would be gratley appreciated best regards paul

  Try this:

  Remove the hard drive

  With the removed hard drive boot the computer and enter the BIOS

  Find your Sata operation setting and ensure that its value ATA

  Replace your boot order the way that was, save and stop.

  Reinstall the hard drive and the shoe at the screen BIOS F12 spam until the boot selection screen appears.

  Select the CD drive and continue with the installation.

  I hope this helps!

• Windows 7 cannot recognize the gt-19300 galaxy s3 driver

  I did a factory reset my Galaxy S3 GT-19300 but now windows 7 cannot recognize the device. Windows is unable to install the driver and it fails.
  Any suggestion is appreciated.

  See you soon,.

  Hello

  I suggest you to update the computer USB drivers and check if it helps.

  Note: Unplug all devices US waiting for the mouse and keyboard before performing these steps.

  (a) click Startand then click on Panel.

  (b) click system and Maintenance, click System, and then click on Device Manager.

  (c) note: If Control Panel is in Classic view, double-click Systemand then click on Device Manager.

  (d) If you are prompted for an administrator password or a confirmation, type the password, or click allow.

  (e) in Device Manager, double-click to enlarge ""Universal Serial controllers Bus ", right click on the controller host, click"Uninstall"and click"OK"."
  Check that if at all, there is an exclamation point on the pilot, it suggests problems with the installed driver.

  (f) repeat step 2 to uninstall all the elements "Bus USB controllers'.»»

  Then, restart your computer and Windows 7 will automatically reinstall all USB controllers.

  For more information, see the links below:

  Updated a hardware driver that is not working properly:
  http://windows.microsoft.com/en-us/windows7/Update-a-driver-for-hardware-that-isn ' t-work properly

  Automatically get recommended drivers and updates for your hardware:
  http://Windows.Microsoft.com/en-us/Windows7/automatically-get-recommended-drivers-and-updates-for-your-hardware

  I also suggest you to contact Samsung Galaxy Support and check whether they have all the drivers available for the gt-19300 driver Galaxy s3.

  Here is the link to contact Support in Samsung Galaxy: http://www.samsung.com/us/support/

• Error - Windows cannot read the disk in drive F:\-Assurez-vous that the disc uses a format Windows recognizes. If the drive is not formatted, you must format it before you use it

  Original title - Windows cannot read blank disc

  When I insert a blank DVD-R disc for burning, an error is indicated - "Windows cannot read the disk in drive F:\-Assurez-vous that the disc uses a format Windows recognizes." If the drive is not formatted, you must format it before you use it. "So I can't burn a DVD-R disc... But if I use the DVD-RW drive, it can be burned smoothly without any problems... Windows cannot recognize only the DVD-R disc... My DVD - RW driver is Sony Optiarc AD - 7280S. When I use Windows 7 without problem was found in the burning a DVD-R disc. But after using Windows 8, I can't burn a DVD-R disc. So please help me...

  Hello

  Thanks for posting your query on the Microsoft Community.

  According to the description, I understand that you have a problem with the disc.

  As you mentioned that you have tried the steps of troubleshooting mentioned in this thread.

  I suggest you run the Fix-it tool and check if it helps.

  This tool diagnosis and repair CD or DVD drive issues, when you can not burn or play CD or DVD discs when a disc is not found, not available or not connected.

  See the link below.
  https://support.Microsoft.com/en-us/mats/cd_dvd_drive_problems?WA=wsignin1.0

  As we have tried most of the troubleshooting steps to resolve this problem, and if the problem persists after you run the tool fix - it also. So, I suggest to get in contact with equipment manufacturers , because they will be the best person to help you.

  Hope this information helps. Please let us know if you need additional assistance. We will be happy to help you.

• Compaq presario cq57-339WM does not recognize the drive as a bootable disk recovery

  Compaq presario cq57-339WM does not recognize the drive as a boot drive recovery, I'm sorry people, I searched and I entered the job in New York as a matter of research. Operating system is 7 Home premium. Hard drive went bad, so I rplaced with new. I have had I have windows image backup, but the wizard could not find the hard drive. I ordered the HP poped the first of the two recovery disks, but the machine does not recognize the drive as a bootable disk recovery. I did factory retrieve records a large number of times on computers with different operating systems and have never seen this. TNA

  Randy Rich

  I found this on PC world. I downloaded everything I need, I hope. I tried not to build the disk again. I need some rest and sleep. Stay tuned for more develonents. Here is the link http://www.pcworld.com/article/2364269/how-to-reinstall-windows-like-a-pro.html?page=2

• If I enable security on an ad hoc network, my Windows 7 client cannot recognize the network at all.

  XP host and client windows 7 on ad - hoc network...
  Dear friends, I have set up an ad hoc network between two laptops. The host is running on xp sp3 and the client is running windows 7.
  Now the problem is that if I enable security on the network, the client windows 7 cannot recognize the network at all.
  If I turn off security on the network ad-hoc, everything works fine and I can share files and access the internet on client... Please help

  Ok

  Now, I'm pretty sure that I understand your game up. Well done to get the internet connection, sharing of work (not a simple process) but without encryption.

  I am sure that the problem lies in the Windows 7 laptop (laptop 2). When you switch cell 1 to WEP, you must also pass portable 2 to WEP and provide the WEP key you have configured with laptop 1.

  It's getting late here now, but I'll try to answer tomorrow after I have test it on my two laptops to Windows 7. In the meantime maybe I can point you in the right direction...

  • Right-click the the small icon at the bottom right of your screen on laptop network 2 and then click on Open Network and Sharing Center
  • In network and sharing Center, click on manage networks wireless (nearby at the top left)
  • Click Add, and follow the wizard to create an ad hoc network, selecting WEP and providing the encryption key you configured on the notebook 1
  • Save the network so that you do not have to repeat this procedure.

  Otherwise, when you get to manage wireless networks, if your ad hoc network is already listed...

  • Right-click in your ad hoc network, and then click Properties
  • Click the Security tab
  • Change it to WEP and provide the encryption key
  • Click OK

  Good luck, I will pick up this new after my drowsiness.

  Tricky

• Does anyone know how to change windows to recognize the disks with 520 bytes per sector? Or one knows if Windows 7 will recognize no 512 bytes per sector drives? Reader vendors will move to larger areas in the future.

  Windows does not recognize disks that are not 512 bytes per sector. Put readers at the point as unknown and I can't access it through the operating system. Is there something I can change to get Windows to recognize the disks that are not 512 bytes per sector?

  Hello MetalRain,

  Thank you for your message.  Are you able to see the disks in disk management?  Try the following:
  Click 'Start' > right click on 'My computer' > select 'manage '.
  Click on "disk management".
  On the right, you see your drive?  If so, you can right click and it assign a drive letter.
  Now you should be able to close this window and you can format your drive to NTFS, you can specify to change the bytes per sector 512 if you wish as seen HERE.
  After assigning a drive letter, follow the steps below:
  Click "Start" > click "Run" > type cmd in the text field and press "Enter."
  In the command prompt, type format c:/FS: NTFS / a: 512 and press "Enter."
  Please let us know if it did or did not help to solve your problem.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Error: Windows cannot access the disk.

  I burned a dvd backup of certain data (downloads, bookmarks, photos etc.) files using windows drag and drop in the dvd player.

  The burn has been successful I was able to use it immediately, however, on the second (and subsequent) attempts to access the files burnt a windows error appears indicating that windows cannot access the disk.

  Like all other discs are able to be accessible to all without problems, there is no problem with dvd players?

  Please let know us that it's the only backup I have these files.

  I burned a dvd backup of certain data (downloads, bookmarks, photos etc.) files using windows drag and drop in the dvd player.

  The burn has been successful I was able to use it immediately, however, on the second (and subsequent) attempts to access the files burnt a windows error appears indicating that windows cannot access the disk.

  Like all other discs are able to be accessible to all without problems, there is no problem with dvd players?

  Please let know us that it's the only backup I have these files.

  ========================
  If these files are very important... the
  software suite may be worth a try:

  IsoBuster
  http://www.IsoBuster.com/

  Volunteer - MS - MVP - Digital Media Experience J - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• Windows cannot read the disk in drive c.

  I recently bought 5 blank DVDs to burn files, but when I put the disk, it showed no AutoPlay, even if I check suggestions asking me every time, but when I double click on the CD player, it says this message, "Windows cannot read the disk in drive c." can someone help me with this problem?

  Not all DVDs are the same, there are many different types and some DVD players may require a particular type

  If the DVD is blank has nothing to read, that it is not formatted/prepared

  With a dvd in the drive, in Solution Explorer, select a file, rt-click and select send to DVD, it works

• Windows cannot access the disk

  whenever I tried to insert a dvd disc the message "windows cannot access the disk" is shown in this dvd, there's some data. Whenever I check the properties, the size is displayed.

  If the DVD does not work with other disks and other DVD works with current DVD player, then the problem is with the DVD itself.

• My Satellite A300 cannot recognize the buttons at the top of the page

  I + re-inistalled windows vista and installed everything. They work fine except the buttons that are located above the keyboard. I know that I can verify their status in all programs > Toshiba > utilities > Toshiba Assist, but the problem is that the my notebook cannot recognize the buttons.

  I installed all the software for each hardware but still cannot use the buttons...
  What should I do?

  Have you used the recovery disk when you installed Vista?

  If this isn't the case, you must download and install the Package of added value, which can be downloaded from the Web from Toshiba site in the section support/drivers.

• Cannot open the USB external hard drive

  Original title: Hard drive

  I can't open the disk external hard usb and the device can see the list of devices and printer as 'USB to ATA/ATAPI Bridge '.

  Hello

  1. What is the exactly say by "device can see the list of devices and printer as"USB to ATA/ATAPI Bridge""?
  2. do you receive any error messages?
  3. did you of recent changes on the computer before this problem?
  4. were you able to open and use the external hard drive USB before?
  5. try to connect the external hard drive to a different USB port and check.
  6. are you able to access other USB devices with success?
  Method 1:
  I suggest you to run the fixit available at the following link.

  Hardware devices do not work or are not detected in Windows
  http://support.Microsoft.com/mats/hardware_device_problems/en-us

   
  Method 2:
  If the problem persists, try to uninstall and reinstall the USB controllers and check.
   

  (a) click Start, type Device Manager in the start search box and press enter.

  Bus USB controllers b) Expand .

  Note You need to scroll the list to find this point.

  (c) right-click the first USB controller under Bus USB controllers and then click Uninstall to remove it.

  step d) precedes the repeat for each USB controller is listed under Bus USB controllers.

  (e) restart the computer. After the computer starts, Windows will automatically check for changes on the hardware and reinstall all USB controllers that you uninstalled.

  (f) check the USB device to see if it works.

  You can check the link for more information:

  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 3:
  If the problem is not resolved, you can try to connect the hard drive to another computer and check.
   
  Let us know if it helps.

• In my portable automatic update, cannot install the update for windows Vista (KB972145) he gave the Code 80004005 error message and the second time error code 8007000D

  In my portable automatic update, cannot install the update for windows Vista (KB972145) he gave the Code 80004005 error message and error code 8007000D twice. How can you help me solve this problem

  0X8007000D ERROR_INVALID_DATA

  Try to manually download the update and installation
  http://www.Microsoft.com/downloads/en/results.aspx?FREETEXT=KB972145&displaylang=en&sType=s_basic

  It will not appear in your history after a manual installation, but it will show the updates installed in view area. TaurArian [MVP] 2005-2010 - Update Services

• I signed on XP Pro SP3 as an administrator but you cannot change the timing of Windows Update to 03:00. All options are not enabled. How can I change the time, updates are made? __

  I signed on XP Pro SP3 as an administrator but you cannot change the timing of Windows Update to 03:00.  All options are not enabled.  How can I change the time that updates are made?

  Hi imoffshore,

   

  Welcome to Microsoft Answers Forums.

  We would like to get some more information from you to help solve your problem. You better, please answer the following questions.

  ·         When was the last time it worked?

  ·         Remember to make changes to the computer recently?

  ·         You have security software installed on the computer?

  ·         You get the error message?

  When you open the tab automatic updates in the control panel or My Computer property sheet, all options of configuration of the automatic updates may be grayed out. This happens due to one of the following reasons:

  1. You are not logged as administrator (or equivalent)
  2. Strategy of automatic updates is enabled
  3. Automatic updates (and Windows Update) access is blocked by group policy

  The options available for automatic updates.

  You must make some changes in the windows registry.

  Important: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/322756

  • Click Start, run and type REGEDIT to . EXE
  • Go to this location:

  HKEY_LOCAL_MACHINE-SOFTWARE-policies-Microsoft-Windows------WindowsUpdate------AU

  • In the right pane, delete the two values AUOptions and NoAutoUpdate
  • Go to this location:

  HKEY_CURRENT_USER-SOFTWARE-Microsoft-Windows-CurrentVersion------policies------WindowsUpdate

  • In the right pane, delete the DisableWindowsUpdateAccess value

  Using the Group Policy Editor - for Windows XP Professional

  • Click Start, run and type gpedit.msc
  • Navigate to the following location:

  => Configuration of the computer
  ==> Administrative templates
  ===> Windows components
  ===> Windows Update

  • In the right pane, double-click Configure automatic updates and set it to not configured
  • Next, go to this location:

  => User configuration
  ==> Administrative templates
  ===> Windows components
  ===> Windows Update

  • In the right pane, set to remove access to all Windows Update features on not configured

  Change how Windows installs or notifies you of updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-how-Windows-installs-or-notifies-you-about-updates

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.