Cannot redownload lenovo smart touchpad

Similar Questions

• IdeaPad Z580 trouble with smart touchpad after upgrade of Windows 8

  I own a Z580 Ideapad and upgraded to Windows 8 yesterday. I noticed that the smart touchpad stopped working after the upgrade. I installed the correct driver, Synaptics Touchpad Driver for Microsoft Windows 8 (32-bit, 64-bit) - IdeaPad Z380/Z480/Z580, hoping that it would work, but nothing helped. I also tried to reinstall/overwrite my existing 64-bit driver when prompted by my system to do so.

  Scrolling, pinch and side scrolling don't work at all. It is quite frustrating. Help, please.

  Hey guys lenovo recommends a clean install of windows on machines pad idea 8

  read this:

  http://download.Lenovo.com/Lenovo/content/Windows8/upgrade/IdeaPad/index_en.html

  And can get all the drivers for lenovo China site... use chrome to translate the page

  http://Support1.Lenovo.com.CN/Lenovo/WSI/modules/DriverDownload.aspx?SearchType=1&LogicType=0&Machin...

• Lenovo smart downloading

  Hi, I try to use the program LENOVO DOWNLADING SMART , but does NOT work with Firefox v 5.0.1. Lenovo that will correct?

  Tried FIREFOX as admin, but had NO luck!

  IE works fine!

• Lenovo B570 Touchpad question (minor)

  Hello
  I have Lenovo B570 and it's a very nice phone. But there is a minor problem that I face. The touchpad has a vertical line on the right side. When you place your finger on it and go up or down, it acts as a page slider... as it scrolls the page up/down. Earlier, it used to start automatically when the computer starts, but now it doesn't. And every time I opened, simply open the mouse properties window, it starts working all of a sudden... The parameters are also all very well and the vertical scroll is also checked. How this thing get resolved?

  @Pratzal,

  Try to uninstall the driver, reboot, then reinstall the driver and see if it helps.

• Users cannot use a smart card to log on a Server Terminal Services session on a computer that is running Windows Server 2008 R2 with SP1

  We have a Windows Server 2008 R2 with Sp1. There was the same exact problem in Windows Server 2008 (KB958596).

  When you use RDP or ICA (Citrix XenApp 6), smart card login prompt at random does not appear. When we close the RDP or ICA and make a new session of the guest of the smart card is here.

  Where can we get a fix, or a reg fix?

  Hotfix for Windows Server 2008 below...

  http://support.Microsoft.com/kb/958596

  In this scenario, users are unable to connect with their card chip and instead, he is invited for their usernames and passwords. If users don't provide these details, the Terminal Services session times out and disconnects.

  When this problem occurs, the option of smart card logon does not appear in the Terminal Services session. Users cannot connect by using their secret codes, and they must provide a user name and password. The option of smart card logon working again after that that they reconnect to the Terminal Services session one or more times

  Hello y2000max,

  Your windows server is beyond the scope of what is generally answered in these forums of consumers. I would recommend reposting among our public IT to Technet-Windows Server securityprofessionals. Thank you!

• How to activate the scrollbars on a Lenovo laptop touchpad

  I use a Lenovo E531 for laptop with Windows 7 Pro 64 bit and I accidentally disabled the touchpad scroll. I tried everything, but it still does not work. Is there anyone here who knows how to fix this?

  The touchpad scrolling could have been disabled by the system to return to a very basic driver or via user input by adjusting the options in the configuration of the touchpad utility,.

  Click Start or press the Windows key and type mouse select it mouse section of the control panel from the list above. In the mouse properties dialog box, go to the Touchpad tab to see if you can open the Lenova Touchpad utility.
  If you do not get satisfaction to locate or using the Lenova Touchpad utility, go to the E531 Lenova support site and download the latest drivers and utilities for your machine. I checked and the Lenova site seems to list as a ThinkPad Edge E531. Reason for exclusion of the webbot site, you will need to locate the model yourself from the link below.
  ThinkPad Edge E531 support

• Cannot save the new touchpad * DEMO *.

  Hello

  I bought a 32 g Touchpad at the recent firesale.  I read in many places that HP is unlocking the serial numbers so that they can have full function.  Is this true?

  I tried to save it and get the "cannot save...". "Please try again later" message with the PAMS9999 error code

  I hope that what I heard is true, and if so, you can help me!

  Thank you

  Mike

  Demo devices have never wanted to be sold, so they will not be able to connect to the HP webOS server to create an account. However, you can contact technical support at the 877-426-3777 and set up a repair to get your unit fixed demo so it will work as a consumer device so an account can be created.

• Lenovo E430 Touchpad issue

  Hi all

  I own a Lenovo E430. Now it is running Windows7, fully corrected and updated to date.

  My problem is with ultra high sensitivity touching the TouchPad. The TouchPad can react even to touch the fabric.

  This is a problem for me, because I use TrackPoint, I have no external keyboard and during the use of extra clicks unwanted lead to unforeseen events.

  So my question is how can I disable the Touchpoint. I have read several articles and there is no solution for me.

  Thank you in advance for your help!

  Hi, Tsoch

  If you go to the Control Panel and select mouse, a window should appear. In this window, one of the tabs at the top should say UltraNav, if you click on this tab, you should be able to uncheck the Activate touchpad, which allows to disable the TouchPad. Click apply and then click OK. The TouchPad should now be disabled.

  Best,

  Adam

• Lenovo S12 touchpad help

  OK, here's the tragic story. One day my sister accidentally sank a whole Cup of water on my keyboard S12. So much water that when I turned on the computer in turn in the sink, there was water coming out of usb ports. I immediately stop the machine and thinking on the spot got my screwdriver. I opened it upwards so that I can dry. On the way I know I disconnected the ribbon cable from the touchpad to the motherboard, but I can't find the place where it connects. I think that this is possible because I had the same problem with the keyboard, but I fixed it. And the computer works great as im now use it with an external usb mouse.

  IM wondering if anyone has a guide or know how to guide me in the right direction

  Hi unfortunately there is no HMM (Hardware Maintenance Manual)... and I didn't know anybody doesn't open its S12 more right now...

  But I think that there is no possible place... you will see the small connector with a small plastic latch... If you open the cover under the keyboard...

  There are only a few connectors onboard... keyboard, video, sound, speaker and touchpad...

  If you want to see how the connector should look to...? See the S10 Lenovo Service training how open or closed connectors...

  hope you encouraged how it is easy to open the lid...

  cordially KalvinKlein

  ... version of banality of the link I gave last post that's all I know...

  is photos with bitkiller (member of the thinkpad - Forum.de) is

  Remove the power battery

  turn the case

  

  remove the screw with the keyboard icon

  turn the case

  

  slightly lift with screwdriver small plastic bar

  

  and pull upward on the ladder of all... on the left side

  

  Now you can move the keyboard lift and turn around placed on the bezel

  

  a screw to remove the hard drive

  

  pull on the plastic

  

  the latch to the right and upwards

  

  remove these screws of 3 (2) and remove the caps covering

  

  the joint can be easily pulled slightly tild back

  and remove these 2 screws

  ... and so on sorry no instructions... but this is the way to go...

• Cannot get Toshiba smart 40RL958B TV shows Toshiba Satellite C55 on WiDi

  I have a Toshiba newly bought c55 Windows 10 satellite and also a Toshiba 40RL958B smart tv and I have tried to connect wireless on widi without success, I easily connected using an hdmi cable but I need the option of widi.

  anyone?

• Satellite M50-A-118 - cannot scroll using the touchpad

  Hi people!

  I have a Satellite M50-A-118 and I can't scroll with my touchpad.
  How can I solve this problem?

  If please check the touchpad options and make sure that the option of scrolling is enabled.
  Have you ever done this?

• Re: Satellite A210 - 11 c (PSAEGE) - cannot scrolling on the touchpad

  Hi guys,.

  I have a Toshiba Satellite A210 on which I have installed recently with Win XP SP3 and I have a problem with my Synaptics Touchpad. IT doesn't scroll!

  I tried a few other drivers Toshiba, synaptics home page page drivers, old drivers and others... anyone can help pls with other suggestions?
  In the mouse settings, I have even other public services other than the left/right keys

  Hello!

  Have you enabled virtual scrolling in the Synaptics driver?

  You should check this because this feature must be enabled. Go to the control panel-mouse-online-online-online virtual scrolling settings device settings online.

  Therefore, the Synaptics driver must be installed. I m using the driver from the Web site and Toshiba don't have problems.

  Good bye

• Cannot install Lenovo Solution center 3.2

  I have a W520 I've updated from Windows 7 to Windows 10. Lenovo Solution Center gave some error messages about missing items, Solution Center 3.2 installer so downloaded. When I try to run the installer, it is said "the operating system is not enough to operate the Lenovo Solution Center". I uninstalled the 2.8 version to see if that was the problem, but got the same error message. I just reinstalled version 2.8 without any problems.

  Thanks, Aryeh, the 64-bit version worked. It is different from what is supposed to be the 64-bit http://support.lenovo.com/us/en/downloads/ds104501 version which is lscsetup_x64_32004.exe. On this page even though it says at top it is for 64 bit Windows 10, lower he says that the operating system that is supported is windows 10 32 - bit, so something mГЄlГ.

• Cannot create a smart group with three conditions

  When I create or edit a smart group, I can specify one or two conditions. But if I try to add a third condition, no third line is displayed, even if the OK button goes grey as if a third line were appeared containing a partially specified condition.

  Does anyone of you can create a smart group with three or more diseases? I can't.

  You need to scroll to the bottom of the list of criteria to see one after another. The window is not resized.

• Lenovo y580 touchpad not working not

  Hello

  My touchpad does not work... basically the pointer does not move. The buttons work, just the pointer is stuck and in order to move, I have to lightly touch the left button... I have yet to build on it. What of the parameters, because I can't find one that fits to fix. Please help guys!

  Kind regards

  TAHER

  Hello

  It's working now
  I have no idea how the problem was solved.
  That's what I did:
  1.I press OneKey Recovery, when I went to system recovery mode.
  2. the laptop reboot and entered into system recovery mode.
  3. I was asked for the rear... but I have nothing, everything came out of the application.
  4. laptop reboot new Hello.adb and load the operating system.
  5 Touchpad works perfectly now.

  Very weird LOL. THX all