Cannot reduce the DPI because can't see click 'OK '.
When opening my computer, everything was great. I am trying to use PGD to correct. Because everything is so great I don't see the 'OK' to restore the size
I think I don't get it. What to do a system restore when he was OK?
Tags: Windows
Similar Questions
-
Vista - Windows 7 network connection. username and password is unknown.
Hello
I just got a laptop with windows 7 on it and I want to connect to my other PC for it, they are on the same network through a router. the PC can see and access the laptop without asking for a user name and password but the laptop cannot access the PC because it asks me a username and password that I don't know.
If someone could answer this question, it would be great.
HelloMaybe this can help.Win7 when configured on the peer-to-peer network has three types of configurations of sharing.
Group residential network = only works between Win 7 computers. This type of configuration, it is very easy to entry level users to start sharing network.
Working network = fundamentally similar to previous methods of sharing that allow you to control what, how and to whom the records would be shared with.
Public share = network Public (as Internet Café) in order to reduce security risks.For the best newspaper of the results of each computer screen system and together all computers on a network of the same name, while each computer has its own unique name.
http://www.ezlan.NET/Win7/net_name.jpg
Make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions
General example, http://www.ezlan.net/faq.html#trusted
Please note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .------------------------------
If your network consists only of Win 7 and you want a simple network, use it.
http://Windows.Microsoft.com/en-us/Windows7/help/videos/sharing-files-with-HomeGroup
After you have configured the homegroup, scroll to the bottom for the Permission/security section.
-----------------------------
Win 7 networking with other version of Windows as a work network.
In the center of the network, by clicking on the type of network opens the window to the right.
Choose your network type. Note the check box at the bottom and check/uncheck depending on your needs.
http://www.ezlan.NET/Win7/net_type.jpg
Win 7 network sharing folder specific work - http://www.onecomputerguy.com/windows7/windows7_sharing.htm
Vista file and printer sharing - http://technet.microsoft.com/en-us/library/bb727037.aspx
Windows XP file sharing - http://support.microsoft.com/default.aspx?scid=kb;en-us;304040
Sharing printer XP - http://www.microsoft.com/windowsxp/using/networking/expert/honeycutt_july2.mspxSetting Windows native firewall for sharing XP - http://support.microsoft.com/kb/875357
Windows XP Patch for sharing with Vista (no need for XP - SP3) - http://support.microsoft.com/kb/922120When you have finished the configuration of the system, it is recommended to restart everything the router and all computers involved.
-------------
If you have authorization and security problems, check the following settings.
Point to a folder that wants to share do right click and choose Properties.
In the properties
Click on the Security tab shown in the bellows of the photo on the right) and verify that users and their permissions (see photo below Centre and left) are configured correctly. Then do the same for the authorization tab.
This screen shot is to Win 7, Vista menus are similar.
http://www.ezlan.NET/Win7/permission-security.jpg
The Security Panel and the authorization Panel, you need to highlight each user/group and consider that the authorization controls are verified correctly.
When everything is OK, restart the network (router and computer).
* Note . The groups and users listed in the screen-shoot are just an example. Your list will focus on how your system is configured.
* Note . There must be specific users. All means all users who already have an account now as users. This does not mean everyone who feel they would like to connect.
---------------------
*** Note. Some of the processes described above are made sake not for Windows, but to compensate for different routers and how their firmware works and stores information about computers that are networked.
Jack-MVP Windows Networking. WWW.EZLAN.NET
-
I install creative cloud desktop application Illustrator on a machine with windows 7 64 bit running in a domain environment. The download begins and takes about runs for a bout 10 minutes and then stops with error: DF024: impossible to preserve the original in "C:\Program Files\Adobe\Adobe Illustrator CC 2014\Support Files\Contents\Windows\AdobeLinguistic.dll" file error 32 the process cannot access the file because it is being used by another process. SEQ (1352)
I am logged on as network administrator, and there is no other apps except a web browser (Chrome) running. There is no other users logged in to the machine.
How can I see what another process is using the file necessary so that I can fix it?
Thank you
MelissaB34 if you continue to face the difficulties of installation, you can also try to use the CC cleanup tool to help ensure a clean removal of the software. You can find more information, as well as a link to download the CC cleaning tool, to use the CC cleaning tool to resolve installation problems. CC, CS3 - CS6 - http://helpx.adobe.com/creative-suite/kb/cs5-cleaner-tool-installation-problems.html.
-
Windows Media Player cannot play the DVD because no compatible DVD decoder is not installed on your computer.
FWIW... Win XP cannot natively recognize Commercial
DVD video... it requires a DVD decoder.If you could play before commercial video DVD...
do a system restore to a time before this started
may be your solution.Or you could buy a DVD decoder at the following link:
(FWIW... it's always a good idea to create a system)
Restore point before installing software or updates)(948247) how to set a system restore
point in Windows XP
http://support.Microsoft.com/kb/948247Info about DVD decoders:
Plug-ins for Windows Media Player
http://Windows.Microsoft.com/en-us/Windows/downloads/Windows-Media-Player/plug-insOr you can download and use one of the following
freeware multimedia players:VLC Media Player
http://www.filehippo.com/download_vlc/
(works on XP/Vista/7)Media Player Classic Home Cinema
http://MajorGeeks.com/Media_Player_Classic_Home_Cinema_d6213.html
(works on XP/Vista/7)Or... you can try to download and install one of
the following Codec Packs.(FWIW... it's always a good idea to create a system)
Restore point before installing software or updates)* Proceed at your own risk *.
(1) K-Lite Codec Pack (full)
http://www.filehippo.com/download_klite_codec_pack/
(Win XP / Vista / Win 7-32 bit and 64 bit)(2) information on CCCP (combined Community Codec Pack)
http://www.CCCP-project.NET/wiki/index.php?title=Main_Page
(Windows 7, Vista and XP SP1 and above - 32-bit and 64-bit)Good luck...
-
All of a sudden I started getting a "Cannot complete the command because of a problem." message using the Adobe color engine Can anyone suggest what it can be and how to fix it? Thank you very much!
Trash this stage and re - register. It could be that new file dialog tries to assign a document profile that is damaged or is no longer present on your system. If this does not work, reset the Photoshop preferences. Press ctrl + alt + shift at the launch, confirm with the dialog box that appears if you did it correctly.
Make sure to save all your other actions, brushes and so on first!
Shares usually work between different versions, but if certain parameters have changed they may fail right there.
-
I have a mac-mini end 2012, OSX El Capitan 10.11.3, 2.5 GHZ intel core i5, 116 GB 1600 MHZ, DDR3
When I connect to my Chase account using 1Password, I get the message "Safari cannot open the page because the server has quit unexpectedly the connection, try again later".
I called Chase, their system is working normally. I rebooted the computer twice, I have tried for 3 days now.
I went to Safari/Preferences, deleted cookies etc. All to nothing does not.
Ideas?
Have you signed up with before Safari?
-
Unable to access the bottom of the screen in order to reduce the dpi fonts
original title: reduce the dpi fontsPPP has been expanded, cannot return by default because I can't go at the bottom of the page to apply the changes.
PPP has been expanded, cannot return by default because I can't go at the bottom of the page to apply the changes.
Use the Enter key.
It's the same thing to click on apply or OK.
-
Safari refuses to go to certain websites (facebook.com, youtube.com) on my iPod Touch and instead displays this error:
S afari cannot open the page because the network connection has been lost.
The bubble at the top where I typed in the URL doesn't change, it always says "facebook.com" or something else.
No matter where I am, so it won't get fixed by resetting my home Wi - Fi router. Other sites load fine. I have reset the iPod, too, by pressing the sleep button and one on the front (whatever it's called) until I see the apple logo. I also did 'Story clear and data Web site' in the Safari settings.
I searched the web and found a number of threads that start with similar complaints, but I can't find one where the problem has been resolved in fact.
Thank you!
Not "no matter where I am," means, it happens with all networks?
If so:
Try:
-Reset the device iOS. Nothing will be lost
Device iOS Reset: Hold down the On / Off button and the Home button at the same time for to
ten seconds, until the Apple logo appears.
-Reset all settings
Go to settings > general > Reset and tap reset all settings.
All your preferences and settings are reset. Information (such as your contacts and calendars) and media (such as songs and videos) are not affected.
-Restore from backup. See:
Restore your device from an iCloud or iTunes backup - Apple Support
-Restore factory settings/new iOS device.
If still problem, make an appointment at an Apple store Genius Bar because it appears that you have a hardware problem.
-
Windows Media Player cannot play the file because there is a problem with the audio device.
Original title: Media Player
I tried to play my music in media player and they will not play. The tab that appears says "Windows Media Player cannot play the file because there is a problem with the audio device. It might not be a sound device installed on your computer, it can be used by another program, or it may not work properly. Also, I can not play music in the window, that I downloaded everything. If anyone has an answer I would appreciate the help. Thank you
Hi MikeMcKayXE,
· What is the brand and model of the computer?
Follow the suggestions below for a possible solution:
Method 1: Quit other programs that may be using your sound device, and then try to play the file again.
Method 2: Install an updated driver.
Step 1: Firstly uninstall the audio from the device manager driver and Add / Remove Programs
a. click Startand then click Control Panel.
b. click Systemand click on the hardware tab, then click Device Manager.
c. to the title sound, video and games controller, check the sound card that is listed.
d. right click on the sound card, and then click Uninstall driver.
Step 2: To see if an updated driver is available, use Windows Update or access the sound device manufacturer's Web site.
Follow these steps to do the same thing:
a. click Startand then click Control Panel.
b. click Systemand click on the hardware tab, then click Device Manager.
c. the title sound, the video controller and games, make sure that the sound card is listed.
d. right click on the sound card and then click Update driver to install the latest version of the driver.
e. visit the sound card manufacturer's Web site to determine if a newer version of the driver is available for download.
Method 3: If you have multiple audio devices installed on your computer, try to use another. The selected audio device might not support Secure Audio Path (SAP).
You can see the following article for more information:
Resolution of the problems of reading in the Windows Media Player for Windows XP
http://support.Microsoft.com/kb/306317
Let us know if that helps.
-
DVD decoder not installed?
I went to play a DVD on my computer this evening and received this msg: Windows Media Player cannot play the DVD because no compatible DVD decoder is not installed on your computer.
A few weeks ago, I played DVD on my computer. I would like to know what is happening. Any ideas/suggestions?I tried to play one of the same DVDs I played before... same message. Nothing to my knowledge has been removed from my computer and I'm the only one with access... "very confused.
Thanks if anyone can help.
Yes, and if you install the utility on your system, you'll see all decoders.
The utility will also tell you if a decoder is compatible or not.
Using Media Player version 10 or 11?
the utility tells me I have no decoder... the only thing I can think is that if I actually deleted it... I rarely remove anything because I do not add a lot... but it is possible a few weeks ago, I have to get rid of some things (I'm quite cautious because I'm not an expert). It is the Media Player version 11, I was trying to use... but I rebooted now 10 to see if there was something to update related that mess.
because I used the VLC Player successfully, I have not yet tried Windows Media Player (since WMP reloading and load the codec pack)
So great to have the entry of a person who knows what he's doing. Thanks again. I will try the Windows Media Player later and see if I have his use of return.
Have a great day!
-
Original title: svchost (1020)
Event type: error
Event source: ESENT
Event category: general
Event ID: 490
Date: 2010-10-19
Time: 14:51:34
User: n/a
Computer: ROB
Description:
Svchost (1020) an attempt to open the file "C:\WINDOWS\system32\CatRoot2\{127D0A1D-4EF2-11D1-8608-00C04FC295EE}\catdb" for read / write access failed with the error System 32 (0x00000020): "the process cannot access the file because it is being used by another process.". The operation to open the file will fail with error - 1032 (0xfffffbf8(JET_errFileAccessDenied)).For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.
Hi Robrw,
1. when exactly you receive this error?
2. don't you make changes to the computer before this problem?
You can try to rename the catroot2 folder and check if it helps.
Step 1:
a. Click Start and in run type C:\windows\system32 and click ok
b. find the Catroot2 folder. Right-click on Catroot2 and rename it to Catroot2.old
If you are not able to do the normal mode, try to start in safe mode and rename
Check out the link for more information on starting your computer in SafeMode below:
http://support.Microsoft.com/kb/315222
Step 2:
If you are unable to access the catroot2 folder, and then try to change the permissions on the files and check if it helps.
See the following article:
How to capture a file or a folder in Windows XP
http://support.Microsoft.com/kb/308421
Step 3:
You can also try to temporarily disable third-party security software and firewalls and check what is happening.
Note: Activate the security software after the resolution of the problem.
Hope this information is useful.
Jeremy K
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
DVD playback problem started today. SE message: Windows Media Player cannot play the DVD because no compatible DVD decoder is installed on your computer ot. I have not had this problem before.
Hi RosemaryHanna,
Thanks for posting in the Microsoft community!
I understand that you are unable to read the DVD. I will try to help you with this question.
(1) did you make any changes before the show?
(2) the video works fine when playing any video recorded or audio files on the computer?
Method 1: Solve the video issues in Windows Media Player and other media or library
http://support.Microsoft.com/mats/windows_media_player_diagnostic/?WA=wsignin1.0
Method 2: You can see the steps mentioned in the article below
Supported decoders MPEG - 2 software DVD in Windows Media Player for Windows XP and Windows Vista
http://support.Microsoft.com/kb/306331
Note: The use of third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.
Let us know the status of the issue. I will be happy to provide you with the additional options that you can use to get the problem resolved.
-
Original title - PROBLEM WITH WINDOWS MEDIA PLAYER
I tried to view a technical presentation online and this is the error I received; -what it means and how can I fix it?
Windows Media Player cannot play the file because a network error occurred. The server may not be available. Check that you are connected to the network and that your proxy settings are correct.
Hi NinaOwens,
1. are you able to view the same content from a different computer?
2. you get the error only with a particular file or with the majority of them?
3. during how long have you had this problem?
4. did you sons of recent change the computer?You can see the links below and check if the proxy settings are correctly performed. Also you can check the other links to verify network connections-
http://Windows.Microsoft.com/en-us/Windows-Vista/change-proxy-settings-in-Internet-Explorerhttp://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-Internet-connection-problems
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems
I hope this helps.
-
When I start windows Vista, I get the error message:
RunDLL
Error loading C:\windows\system32\sshnas.dllThe process cannot access the file because it is being used by another process.
How can I fix?
Hello
It is the result of malware, then do a very thorough check and when the system is
clean see the following message to remove this error.If you need search malware here's my recommendations - they will allow you to
scrutiny and the withdrawal without ending up with a load of spyware programs running
resident who can cause as many questions as the malware and may be more difficult to detect as the
cause.No one program cannot be used to detect and remove any malware. Added that often easy
to detect malicious software often comes with a much harder to detect and remove the payload. Then
its best to be thorough than paying the high price later now too. Check with them to one
extreme overkill point and then run the cleaning only when you are sure that the system is clean.It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
the regular windows when you can.Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
(If Rootkits run UnHackMe)Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
Malwarebytes - free
http://www.Malwarebytes.org/products/malwarebytes_freeRun the malware removal tool from Microsoft
Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.
You should get this tool and its updates via Windows updates - if necessary, you can
Download it here.Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
(Then run MRT as shown above.)Microsoft Malicious - 32-bit removal tool
http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=enMicrosoft Malicious removal tool - 64 bit
http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=enalso install Prevx to be sure that it is all gone.
Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
Prevx - Home - free - small, fast, exceptional CLOUD protection, working with others
security programs. It is a single scanner, VERY EFFICIENT, if it finds something to come back
here or use Google to see how to remove.
http://www.prevx.com/ <-->
http://info.prevx.com/downloadcsi.asp?prevx=Y <-->Choice of PCmag editor - Prevx-
http://www.PCMag.com/Article2/0, 2817,2346862,00.aspTry the demo version of Hitman Pro:
Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
(viruses, Trojans, rootkits, etc.). who infected your computer despite safe
what you have done (such as antivirus, firewall, etc.).
http://www.SurfRight.nl/en/hitmanpro--------------------------------------------------------
If necessary here are some free online scanners to help the
http://www.eset.com/onlinescan/
-----------------------------------
Original version is now replaced by the Microsoft Safety Scanner
http://OneCare.live.com/site/en-us/default.htmMicrosoft safety scanner
http://www.Microsoft.com/security/scanner/en-us/default.aspx----------------------------------
http://www.Kaspersky.com/virusscanner
Other tests free online
http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1--------------------------------------------------------
Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing
system files.Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup
Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
RUN AS ADMINEnter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker
(SFC.exe) program generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html-----------------------------------------------------------------------
If we find Rootkits use this thread and other suggestions. (Run UnHackMe)
I hope this helps.
Rob - bicycle - Mark Twain said it is good.
-
Original title: speaker FOR desktop
In the deskstop I connected an external speaker INTEX WITH power SUPPLY via USB and pins with audio jack. The device is installed REALTek. When I play songs or video, he said: -.
"Windows Media Player cannot play the file because there is a problem with the audio device. "It might not be a sound device installed on your computer, it can be used by another program, or it might is not working properly.
How to solve this problem.
Hello
I realize has the inconvenience that you are having with your speakers that you get an error message while playing the songs. I will certainly help you to question.
I would like to know some information:
Have you tried to plug any other speakers or headphones?
You did changes to the hardware/software before this problem?
Have you tried using these speakers with another PC?
Also, I suggest you refer to the suggestion of Pinaki reducing replied on June 20, 2014 from the link below:
Hope this information helps.
Thank you to provide us with the information to look for more on this subject and to better understand the issue and we will be happy to offer our help.
Please get back to us with an update on the issue, we will be happy to help you.
Maybe you are looking for
-
If I'm on a Web site and open a few different pages and then decide to return to a previous page, or close the page in question, I get a message that says you close tabs 3 or 4 tabs etc. If I want to just close the 'courses' tab I'm on, I was able to
-
The installation of Service Pack 2 for Vista failed. I tried several times. Message reads "not successful." "Element not found". I click on the 'Détails' link and it shows the following error: ERROR_NOT_FOUND (0 x 80070490). I tried in several ways t
-
OfficeJet 6500 printer a wireless set up correctly, but my laptop does not see the printer.
E710 OfficeJet 6500 a Plus Laptop Dell Windows 7 64 bit version The printer is set to work wireless. I have the printer set in place. I could print my wireless test report and have determined "That I have successfully setup my printer wireless." Bu
-
I have a linksys wireless-G usb adapt wusb54gc connected to my laptop using Windows XP. On every 2 weeks or so when I first try to connect to the internet my adapter says "cannot renew IP address. I can only restore my wireless connection by uninstal
-
How to capture characters from video games on a white background?
So I honestly don't know where to start. I am a beginner to AE and wanting something very basic, but don't know what to ask. Also will be the link of a creator and I'm looking to do something similar.Want to ENB - YouTubeI am only concerned about the