Cannot reinstall Windows. Stop randomly.

Similar Questions

• Cannot reinstall Windows XP after the removal of Windows 8. The installation does not complete.

  I installed win 8 January last on a xp pro machine, which was in surplus. I uninstalled the victory 8 and now impossible to reinstall win xp pro

  The computer is a homemade which ran from win xp pro for several years. I installed win 8 trial knowing that it would take a new installation of XP Pro after the expiration of the 8 victory. I have reset my bios on a cd first and started in the installation cd after installing win xp, it went to boot, and the cd has been removed. a restart was launched and he went into the bios to save install and after the robot below the windows splash logo made 3 passes, he stopped at halfway. After this is is spent in attempts to bppting I noticed that whenever the start stopped he left the Num lock, cap lock, and scroll liux lights were all on on the keyboard. I traded my keyboard with one of my current computer and it always occurres. I started to reload several times now and always the same. No bios settings have helped.

  Hello

  Unplug the machine to see if this allows the machine to reinstall the operating system of any material not needed (such as printers, fax, speakers, USB devices (except keyboard and mouse), Internet connections, etc.).

• Cannot reinstall Windows Vista because the Windows.old file is corrupted.

  I hope someone can help! I'm about to pull out my hair! :)

  I have a laptop Dell Inspiron 1720, under Windows Vista Home Premium, with 3 GB of ram. SP2

  I had problems with error messages

  Here are some of the messages I was getting.

  "Dell Quickset has stopped working"

  "Windows Management Instrumentation has stopped working"

  "The user profile service has stopped working".

  "Windows Update has stopped working"

  There were a couple more but I do not remember. They are all gave me the ability to check online for a solution I have chosen and the message would go for a while, but not forever.

  I'm tired of dealing with him, so I used my Dell disk to reinstall Vista. I did not choose the repair option first. I chose to do a clean install. When I got to the last step where it says "Complete the Installation", it gave me an error message telling me that the "Windows.old" file is corrupted. I do not have wright the rest of the information down, but he told me to run the check disk utility. (I think it has been shown as chkdsk). I clicked 'OK' and the screen went black and stayed like that for an hour. I turned off the computer and repeat all the steps but always goes to the black screen and stops. I tried to use the fix and it found a problem immediately and that fixed it, but after reboot, same thing. Yesterday I ran again the repair option, and it still works today. All night and nothing. She is still ongoing as I type this message. My question is how to run disk utility to check without an operating system installed? Use the "Diagnostic" option when I boot the disk from Dell? Any ideas on how I can get reinstalled Vista?

  Boot from the Dell cd and run diagnostics

• Cannot start windows STOP error code: 0x0000C1F5.

  OT: Tent Windows Start, fails, try to restart, and fails again. STOP error code: 0x0000C1F5. Does not start with the DVD of resettlement. Won't do anything.
  Any suggestions?

  Hi Kya,

  You have made no changes to the computer before the broadcast took place?

  You can try the steps from the following links:

  This problem occurs because the Common Log File System (Clfs.sys) driver does not solve the $TxfLog file when the file is corrupted. In addition to the error message Stop Windows Vista may not start during startup until the offending disc is removed from the computer.

  How to get around the Stop error on a Windows Vista-based http://support.microsoft.com/kb/970101 computer 0x0000C1F5

• Satellite L300D - cannot reinstall Windows

  Hello
  (Sorry for my English, I'm a french user...)

  I have format my HARD drive and loose recory. I have no CD. In the BIOS if I use the compatibility I don't see any HARD drive. If I use AHCI I see HDD but Windows Installer used on it
  Give yourself a screenshoot... in french...

  http://img14.imageshack.us/img14/5077/0imag0082.jpg
  http://img440.imageshack.us/img440/9468/dsc05156r.jpg

  Thank you for your help...

  Hello

  Come on, buddy! History on AHCI and compatibility has been discussed 100 times before here in the forum and you should only use the Forum search if you need more information.

  And if you really want a good answer, you must post your exact model laptop and the version of Windows that you are installing.

  For the installation of Windows in AHCI mode, you have the SATA driver, all that s!

• I tried to reinstall windows xp from the operating drive after the removal of the original, but I continue to have problems I do not know much about pc'c

  Maybe I deleted Internet Explorer is it possible? Yes if the reason for which I cannot reinstall Windows XP? I have run from the cd, but more a step further. I removed the original in the hope to reinstall that my pc would be allowed again. Would appreciate any help.

  Hello

  Internet Explorer is part of the XP operating system that is located on the CD. It is on the CD and is installed as part of the installation process

  You need to change the Boot order to make the DVD/CD drive 1st in the order of startup and startup disk:

  How to change the Boot order in BIOS:

  http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm

  And follow this information to reinstall XP.

  http://pcsupport.about.com/od/OperatingSystems/SS/instxpclean1.htm

  See you soon.

• I want to reinstall Windows XP but I do not have a disk. Where can I download Windows XP and boot from a USB?

  I want to reinstall xp. I have original xp.my laptop has no cd rom device.where I can download xp, so I can boot from a USB?

  original title: install windows xp without CD

  Andrea,

  First of all. You cannot reinstall Windows XP without CD.
  Second, a download of Windows XP isn't illegal, I don't think you will get all the answers here to know where to download a copy of Windows XP.
  Better call the computer manufacturer instead.
  See you soon ~!

• Windows Update does not work after you reinstall Windows XP SP3, get error: "the site has encountered a problem and cannot display the page you are trying to view.

  Original title: cannot run Windows Update

  I just reinstall my Windows XP and SP3, but I can't run Windows Update and gives me the following error message:

  The website has encountered a problem and cannot display the page you are trying to view. The options provided below may help you solve the problem.

  For self-help options:

  • Frequently asked Questions
  • Find Solutions
  • Windows Update Newsgroup

  To support options:

  • Microsoft online assisted support (no cost for Windows Update issues)

  Can someone help me please?  Thank you.

  I just reinstall my Windows XP and SP3, but I can't run Windows Update and gives me the following error message:

  The website has encountered a problem and cannot display the page you are trying to view. The options provided below may help you solve the problem.

  For self-help options:

  • Frequently asked Questions
  • Find Solutions
  • Windows Update Newsgroup

  To support options:

  • Microsoft online assisted support (no cost for Windows Update issues)

  Can someone help me please?  Thank you.

  [1] select start > run > wuaucpl.cpl > disable automatic updates > apply (if the setting is changed) > OK

  To disable the horse notification that appears in the status bar on automatic updates is turned off.

  Go to start > Control Panel > Security Center > resources > change the way Security Center alerts me > uncheck automatic updates

  [2] manually download the full install for IE8 exe and install IE8 and refuses to download updates at the time of the installation of IE8

  http://www.Microsoft.com/en-us/download/Internet-Explorer-8-details.aspx

  [3] manually download and install the latest cumulative security for IE8 update and restart the computer before

  visit windows update via the shortened link in your Start menu.

  When you have Win XP SP3 and IE8, it will be the necessary file recommend you download and save the file in the folder, and then double-click on and run the executable file from there.

  http://download.Microsoft.com/download/1/9/A/19A6AC47-9EA0-455F-B918-A44D25B5304C/IE8-WindowsXP-KB2898785-x86-enu.exe

  Restart after installing IE8 cumulative security update.  It should restart when installation is complete.

  [4] now to connect to windows update manually through your browser using the shortcut in the start menu link.  Ignore the warnings, recommendations to turn on automatic updates.

  Report back please on the status and please report problems with error codes. Thank you.

  Recommend you not install MSE but rather install a free antivirus like Avast or AVG.

  Recommend also you do not install Windows Search 4.0 these programs not to live pleasantly on most XP machines and cause CPU excessive loading unpredictable and inconveniently sometimes interfering with the usual ability to XP if not to multitask without problems.  Also recommend you only install Firefox is a browser much better than IE8 that will not work even at many Web sites.

• lost my controller ethernet and sm bus controllerafter reinstall Windows xp. Device Manager cannot find the drivers. Any suggestions?

  using a computer compaq Intel refurbished. At drivers before reinstalling windows xp. Try to join I have pad and Netflix via a NETGEAR router, but cannot do so without ethernet controller.

  Hello

  Please go to the Microsoft Community Forums.
  Description of the question, we understand that you want to reinstall the Ethernet drivers.
   
  If you could answer a few questions that would help us resolve this problem:
  1. What is the brand and model of the computer?
  2. do you have the CD/DVD driver provided by the manufacturer of the computer?
  3. are you able to connect to the internet?
   
  -We would like to say that you can install the network card drivers from the CD/DVD driver provided by the manufacturer of the computer.
  -In addition, you can download all these drivers on a USB of the computer manufacturer's website and install it on the desktop.
   
  Hope that answers your query. If the problem persists, answer us the answers to the questions above so that we can help you further.

• Can someone tell me what I should type in the screen command prompt to access the setupapi log so I can delete the files that stops me reinstall windows xp?

  My dell PC crashed then I followed the news online & tried to reinstall windows XP from my original CD. However, the keyboard & mouse stop working when the installation gets to the 33 minute section which requires me to a box on the screen. I saw tips online who says lets you check the setupapi log & delete the file question (s) that prevents the installation but it required that use you SHIFT & F10 to enter the command prompt screen, but my keyboard is isolated at this time. So I went in the recovery console (I think it's the command prompt)?  but I don't know which of the listed commands to use to perform the advice. I would be very grateful for help.

  Thank you

  Repair installs being problematic, I would not waste any more time at this stage. You are ready to perform a clean installation?

• Reinstalled Windows XP HOME SP2 and cannot download the appropriate components to upgrade my software to SP3! Suggestions?

  Reinstalled Windows XP HOME SP2 and cannot download the appropriate components to upgrade my software to SP3! Suggestions? It seems that microsoft Web sites send me in circles. Patches do not work either.

  Hello
   
  1. What is the error code / message that displayed when you try to install updates for your Windows Xp Service pack 2 computer?
   
  2. What are the steps of troubleshooting that you already tried?
   
  Please follow the links below to solve the problem.
   
  Method 1
   
  Step 1
   
  Steps to take before you install Windows XP Service Pack 3
   
  http://support.Microsoft.com/kb/950717
   
  Step 2
   
  Cannot install Windows updates
   
  http://support.Microsoft.com/kb/555461
   
  see, http://support.microsoft.com/kb/906602
   
  Method 2
   
  If you still face problems, please start your computer in a clean boot to avoid conflicts with security and third-party software conflicts and try to install updates.
   
  How to configure Windows XP to start in a "clean boot" State
  
  http://support.Microsoft.com/kb/929135
   
  Note: Follow the steps to configure Windows to use a normal startup state of the article mentioned above to start the computer in normal startup when you have completed the necessary troubleshooting.
   
  I hope this helps.

• Impossible to reinstall Windows XP error: BSOD STOP: 0X0000007E (0XC0000005, 0XF78DA208, OXF78D9F08)

  Original title: BSOD

  tried to reinstall windows xp bsod STOP: 0X0000007E, (0XC0000005, 0XF78DA208, OXF78D9F08 * pci.sys_address more numbers to several numbers and a date stamp.)

  Hello

  1. How are you trying to install?

  2 do you use a full version Windows Setup disc or the recovery disk?

  3. at what stage of installation you get the error message?

  I suggest you try the steps from the link below and check if it helps.

  http://support.Microsoft.com/kb/330182

  Additional information:

  How to fix a computer that does not start: http://windows.microsoft.com/en-US/windows-xp/help/setup/how-to-fix-computer-that-will-not-start

  Hope this information is useful.

• Cannot start Windows XP - Stop 0x7B

  Whenever I try to start, I get a blue screen. 0x0000007B (0xF8897528, 0xC0000034, 0x00000000, 0x00000000)

  It is possible that there is a virus that prevented him from start.
  I tried to start in safe mode, but apparently there are some missing DLLs.
  I don't have a Windows XP CD to perform a system recovery.
  EDIT: I could get an ISO and use it to start.
  However, when reinstalling Windows, I get another error: Setup did not find any hard drives installed on your computer. This might explain why he does not start...

  This means that you have enabled the AHCI in the BIOS (and you did not install the SATA drivers).

  If you do not install the SATA drivers (installing XP and AHCI is enabled), Setup will not find the hard drive, and you will get the stop error 0x0000007B.

  And if the AHCI is disabled in the BIOS (when you install XP, XP will install), but if you turn back on AHCI (after installation of XP). It will crash with a stop error 0x0000007B

  You should disable the AHCI or install the SATA drivers during installation (or slip-stream the SATA drivers with Nlite). Then create an ISO, then burn it. Then use it

• Windows speech recognition stops randomly with the error: «the instruction at 0x6434c5e9 referenced memory at 0x0ef2ea80.» The memory could not write. »

  Original title: "the instruction at 0x6434c5e9 referenced memory at 0x0ef2ea80. The memory could not write. "And the instruction at 0x6434c5e9 referenced memory at 0x0ef2ea80. The memory could not be written.

  I have Windows Vista and I use speech recognition Windows, a lot of things. I have used it for years and have really learned to rely on it! Unfortunately, since a recent upgrade of windows installed, Windows speech recognition stops randomly in the middle of using it and it gives me the following error message: «the instruction at 0x6434c5e9 referenced memory at 0x0ef2ea80.» The memory could not write. "And then it stops. When I open it again, it seems to open normally and it will work for varying amounts of time before it does again and I get a different error message.

  I tried to restart and it did not help at all. Please, can someone help me? Please?

  Hi Alicia,.

  1 update you tried to install?

  Method 1:

  You can try to run a SFC scan and check.

  This problem may occur if a system file is missing or damaged.

  You can refer to the method-the System File Checker tool in the following article:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 2:

  Step 1:

  Check the updates that are installed recently.

  You can view the following link to check the installed updates:

  See the Windows updates are installed

  Step 2:

  You can uninstall these updates and try to install the update one at a time and check for the issue.

  Remove an update

  Method 3:

  You can also try a system restore to a restore point before the updates were installed.

  Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  To run the system restore, you can consult the following link:

  System restore

  System Restore: frequently asked questions

  Hope this information is useful.

• Cannot start windows, impossible to reinstall windows, can't restore windows to the external hard drive or to an earlier point in time!

  I have a Dell studio 1535 laptop. When I start it the typical loading screen appears with Dell logo and the possibility to go to the installation or boot menu.

  If I leave this office, I go to the Windows Error Recovery screen with give me the opportunity to start the system restart or start windows normally. If I start windows normally, the loading windows screen comes up while the screen flashes blue with white writing (too fast to read) and I am referred to the Dell loading screen.

  If I select the Startup Repair tool, I come to a screen where I am asked to select my operating system, but the list is empty. It also shows if you don't see your operating system in the list then click loading drivers to load the drivers from your hard drive. He said now insert the device installation media, so I put in the installation CD for the drivers that came with my laptop. I browse through the files on the cd and select 1386 > R180982 > IAAHCI. This will display a list of drivers and I chose Intel(r) 82801HEM/HBM SATA AHCI Controller (I'll explain why later). However when I add this driver it says that the software that supports your device requires you to restart your computer. Also, if I check computer while browsing my HDD is not listed, which I think might be a problem.

  Furthermore, if I don't take any driver, and then click Next when I have 5 options. If I do the Startup Repair, it only takes a few seconds and said if repairs where succesful windows starts normally (which it doesn't).

  If I do the system restore an error comes up saying that, to perform an offline system restore, you must specify which windows installation you want to restore. By example, if the installation is in "C:\Windows" should be restored in the following command: rstrui.exe/OFFLINE:C:\Windows. I have it entered in the command prompt, it runs it sends me to the System Restore screen, but says that no restore points were created so that I can't keep (However, I know that I don't actually have the restore points.

  If I select Windows complete PC Restore it gives the error message "an internal error has occurred. The following information can help you resolve the error: the parameter is incorrect. (0 x 80070057) ».

  If I select Windows memory diagnostic tool and select Restart now and check for problems I get the error "Windows cannot verify the memory problems. A problem is preventing Windows from checking for memory problems during startup. Try to check the problems again by running the tool manually.

  I managed the Dell Factory Restore Image but that did nothing.

  And no, I can't reinstall windows.

  I have a Dell studio 1535 laptop. When I start it the typical loading screen appears with Dell logo and the possibility to go to the installation or boot menu.

  If I leave this office, I go to the Windows Error Recovery screen with give me the opportunity to start the system restart or start windows normally. If I start windows normally, the loading windows screen comes up while the screen flashes blue with white writing (too fast to read) and I am referred to the Dell loading screen.

  If I select the Startup Repair tool, I come to a screen where I am asked to select my operating system, but the list is empty. It also shows if you don't see your operating system in the list then click loading drivers to load the drivers from your hard drive. He said now insert the device installation media, so I put in the installation CD for the drivers that came with my laptop. I browse through the files on the cd and select 1386 > R180982 > IAAHCI. This will display a list of drivers and I chose Intel(r) 82801HEM/HBM SATA AHCI Controller (I'll explain why later). However when I add this driver it says that the software that supports your device requires you to restart your computer. Also, if I check computer while browsing my HDD is not listed, which I think might be a problem.

  Furthermore, if I don't take any driver, and then click Next when I have 5 options. If I do the Startup Repair, it only takes a few seconds and said if repairs where succesful windows starts normally (which it doesn't).

  If I do the system restore an error comes up saying that, to perform an offline system restore, you must specify which windows installation you want to restore. By example, if the installation is in "C:\Windows" should be restored in the following command: rstrui.exe/OFFLINE:C:\Windows. I have it entered in the command prompt, it runs it sends me to the System Restore screen, but says that no restore points were created so that I can't keep (However, I know that I don't actually have the restore points.

  If I select Windows complete PC Restore it gives the error message "an internal error has occurred. The following information can help you resolve the error: the parameter is incorrect. (0 x 80070057) ».

  If I select Windows memory diagnostic tool and select Restart now and check for problems I get the error "Windows cannot verify the memory problems. A problem is preventing Windows from checking for memory problems during startup. Try to check the problems again by running the tool manually.

  I managed the Dell Factory Restore Image but that did nothing.

  And no, I can't reinstall windows.

  Hey joeccash

  If you can not restore system reinstall windows etc you may have a hardware problem

  see if you can press F12 on startup to run dell diagnostics tools

  information on the dell below link

  http://support.Dell.com/support/topics/global.aspx/support/KCS/document?c=us&l=en&s=Gen&docid=DSN_A9E3A15597A04AFBB02EE16785D39C5C&isLegacy=true

  and below dell link has the factory recovery information

  http://support.Dell.com/support/topics/global.aspx/support/KCS/document?c=us&l=en&s=Gen&docid=DSN_336966&isLegacy=true

  If this does not help, try dell or a reputable computer repair persom

  Walter, the time zone traveller