Cannot remove an application, 'must have permission. Try again. »
Have had an application downloaded to the computer. Don't know where it comes from, blmyrpigp, is the name of the application. Virus Protection/firewall has not been successful. Once activated, it has blocked any attempt to delete and or restore the computer to an earlier time and no program is accessible. Created a new user account and am able to use the computer, transfer all files, but cannot remove this program. Any ideas?
Have had an application downloaded to the computer. Don't know where it comes from,blmyrpigp, is the name of the application. Virus Protection/firewall has not been successful. Once activated, it has blocked any attempt to delete and or restore the computer to an earlier time and no program is accessible. Created a new user account and am able to use the computer, transfer all files, but cannot remove this program. Any ideas?
Hey SamTruss
malware stops normally you use the system restore protect themselves remove you
Download update and scan with the free version of malwarebytes anti-malware
http://www.Malwarebytes.org/products/malwarebytes_free
You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes
http://www.bleepingcomputer.com/download/anti-virus/rkill
If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking
Windows Vista
Using the F8 method:
- Restart your computer.
- When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
- Select the Safe Mode with networking with the arrow keys.
- Then press enter on your keyboard to start mode without failure of Vista.
- To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
- Do whatever tasks you need and when you are done, reboot to return to normal mode.
Walter, the time zone traveller
Tags: Windows
Similar Questions
-
Cannot remove an application because it's administered protected.
Cannot remove an application because it's administered protected. I'm the only user on my PC and I tried to uninstall it and using programs of cleaner files but to no avail. I'm afraid that it changes my files and folders because it has permissions to modify files and every time I have to refuse permissions that they reset. I also noticed various system files in good areas. Any help would be great thanks in advance.
-MountfordI tried everything above, but ultimately I came short. Instead, I saved my precious files and then restore my computer to factory settings. It seems to have worked, but it was a lot of effort, unfortunately I forgot my log in then it will have to do.
Thanks for all the help. -
When I try to use the connection parent in windows, I get the following error:
Sorry, the service is not available now
Please try again later.
Error code: 803D 0013
When I try to log on to the familysafety.live.com site, I get the following error:
Something was wrong and we cannot connect you right now. Please try again later.
This happens on both accounts of parent. Here are the addresses of e-mail for these accounts: * e-mail address is removed from the privacy * and * address email is removed from the privacy *.
Hello
Thanks for posting your question in the Microsoft Community forums.
I'm sorry to know that you are facing problems access Family Safety. Let me try and help you with the issue that you are facing.
Many users facing this issue fixed by updating the Microsoft Account profile.
Please update the name and name in the Microsoft account profile, then check if it helps.
See the article:
Security information for the Microsoft account: FAQhttp://Windows.Microsoft.com/en-us/Windows-Live/account-security-password-information
See also the suggestion provided by "Jude D. McCoy' of this thread:
I hope this helps. If the problem persists, we will be happy to help you.
-
Estamos tendo problemas, Bivvy again but some soon. SE o problema persistir between em let com o Suporte ao client. "We have problems, try again at the end. If the problem insists, call the suport. " Whay?
Lacruz0609 are you trying to download and install after effects CC 2015? If yes then please see download and install Adobe Creative Cloud applications for more details on how to install After Effects via the Adobe Creative Cloud desktop application.
-
* Original title: unable to connect to the family safety
I tried to connect to website Windows parental control for 2 days.
I tried two different computers in two places - don't share is not the same ISP, browser, etc.
I get this message:
"Something was wrong and we cannot connect you right now. Please try again later. »
The service is down?
I heard this on another post, and it WORKED for me also! I logged on my account live.com and udated my name in my profile. I don't know if that it or if MS has solved something but I can not connect on fss.live.com. Please share and please post if it worked or not.
-
Cannot remove the Application - EM-01060 &; EM-01075 FMW role
Hello world
I installed logical web 11 g/OBIEE on a 64-bit windows 7 (Enterprise mode) environment for a proof of concept. I have set up external authentication against the OID and retrieve external data groups. These two functions operate correctly. However, when I create a new custom Application role and assign a group to the table of external database with this custom application role - and then try:
(1) completely remove the custom application role
or
(2) delete the custom group in the role of custom application
I get the following errors:
For the removal of the application role custom:
Message ID EM-01060
Level 1 message
Relationship ID 0
AdminServer component
Module oracle.sysman.emas.security
Host
IP address of the host
The weblogic user
Thread ID [ASSETS]. ExecuteThread: "14" for queue: "weblogic.kernel.Default (self-adjusting).
2ac0a03caa926090:44f32d8b:13965b1c033 ECID: - 8000-000000000000046 c
Error message in remove an application XXXXX of the strategy of the application role.
For the removal of the Group custom in the application role:
Message ID EM-01076
Level 1 message
Relationship ID 0
AdminServer component
Module oracle.sysman.emas.security
Host
IP address of the host
The weblogic user
Thread ID [ASSETS]. ExecuteThread: '11' for queue: "weblogic.kernel.Default (self-adjusting).
2ac0a03caa926090:44f32d8b:13965b1c033 ECID: - 8000-0000000000000486
Error message by updating an existing application XXXXXX role members.
If anyone has experienced this before? How did you solve it?
Thank you very much
JohnHello
It seems to be the BUG
GETPRINCIPAL ERROR WHEN YOU TRY TO DELETE THE GROUP ROLE IN EM
Bug 13800776Check with MOS or open a ticket with Oracle support get more details about it.
Kind regards
Kal -
Cannot remove the application of EPMA
Hi all
I use EPMA 11.1.1.3 to manage Essbase applications. Everything worked fine until I accidentally deleted the Regional service console cube, EPMA not. Now, every time I select this request in EPMA is showing "30:6519:Target application does not exist" and EPMA is not letting me to remove the application. Does anyone know how to remove the application of EPMA gracefully? I know that I can do since the SQL backend, but looking for a more "correct" solution Thank you.
Kind regards
GerdIf you rebuild the application to the Regional service, then try again and delete does the problem still exist, I have not tried it could still be a problem because it will report it as an essbase app and not a planning application, always worth a go well.
See you soon
John
http://John-Goodwin.blogspot.com/ -
[Help] Cannot remove the application
Hello
I am facing a problem to remove the application from my phone. I use the plugin Eclipse of Blackberry to install the application and the problem is that I can not remove this application, because there is no delete option in the home screen and Application Manager. This problem occurs after I update my Blackberry plugin.
Is there anyone facing this problem?
Thank you
You can use javaloader to remove an application.
syntax:
JavaLoader u - wpassword clear f modulename.cod -
Dell Vostro 400 desktop, Windows XP sp3 running hard. it can not enter difficulty online without the following, "Microsoft Fix it online, something was wrong and we cannot connect right now. "Please try again later". Also, previously, when I could get online, my computers does not list the computer I use actually and I can't add the computer or change options.
Hello
- Are you connected to any network?
- Have you been able to connect earlier?
We use Microsoft Live account to connect to Microsoft Fixit Center Online.
I suggest you try posting the question at help below links:
-
Family - sorry, you cannot change your settings now. Please try again later.
I'm trying to add a site in the list for my children. It fails and I get the error: "sorry, you can not change your settings now. Please try again later. "I tried for two weeks and wait until"later"is a euphemism for '' never. ''
Has anyone else seen elsewhere? What should I try next?Hello
Our support specialist verified the information you provided. Please follow the steps below to solve the problem:
- Connect to Family Safety Web site
- Select the child who is not associated with a user account.
- In the blue bar above, click Remove family member and then confirm by clicking Remove.
Let us know the results later.
Thank you.
-
Hello
I am able to run the application in the IDE. I push the application thoroughly and close the application. The second time, when I try to access the app, it does not, the icon is faded and also I am unable to delete app.
Finally my solution will like, target Naigator-> select Simulator-> select process-> emit SIGKILL .
I have to do the entire process every time. What are the scenarios that could cause this problem? Is this something with the code or the simulaor / device?
Please help me with possible solutions.
Thank you
SHA
Thanks for the suggestion.
Cross, I checked the application.
In main.cpp, I used::exec() App twice what has caused the problem.
Kind regards
SHA
-
Hey everyone, I have windows 7 32-bit and, recently, I realized that I can't create all documents (word, note, etc.) on my desk... in fact when I right click on the desktop, the only thing that I can create is a folder, and which must permition of Directors... it shows not even all the other options... permition is also necessary when I am tryin to copy files to another folder (songs of ") Download "in a folder on the desktop)... all these commands seem to work in the documents and records of downloads, but when I'm doing something on the desktop is not... any suggestions?
so I checked all third-party programs, including antivirus, I moved all my data to my libraries, and I can't send them on the desktop as shortcut, since it puts me a message saying that I don't have enough space to do... I think there is there a virus problem and I'll go through format as soon as possible... Thanks for your help anyway mate! I'm going to bother you again if I have a problem: P
-
Of course, if you want to start the viewfinder with a button instead of automatically, you can create a button or action item and have this code in it:
Button{ onTouch:{ supCameras = camera1.supportedCameras; // Check to see if your app has access to the camera. if (supCameras.length == 0 || supCameras[0] == CameraUnit.None) { // Report: "No camera units are accessible." console.log("No camera units are accessible"); } else if (supCameras[0] == CameraUnit.Rear || supCameras[1] == CameraUnit.Rear) { console.log("The rear camera unit is accessible."); camera1.open(CameraUnit.Rear); } else if (supCameras[0] == CameraUnit.Front || supCameras[1] == CameraUnit.Front) { console.log("The front camera unit is accessible."); camera1.open(CameraUnit.Front); } else { // Report unknown error. } } }
Make sure camera1 and supCameras are reported for your whole qml file (IE just below the Page {}). No, it's callcamera1.open (CameraUnit) wheneer you press the button. There is an application example here, even if it is done in c ++, so you will have the choice of the method you want to use!
-
It happened all of a sudden. After that, I reset the computer to an earlier date. Has not fixed the problem. I rebooted the Internet explorer, Version 8. Has not fixed the problem. I can access Hotmail from another computer without problem. I think that I changed something in the tools that could have caused the problem. All the patches and virus checking are up-to-date.
Appreciate any help you can provide.
Don Patterson
I had a similar problem. I could access Hotmail, but not of pleats. I use 17.0.1 Firefox as my browser and tried IE and no problem with Hotmail. I had to uninstall Firefox and reinstall, and then it worked fine.
-
Hi, I tried to install the update to Photoshop CC but failed, I guess due to a connection problem. When I click on start, it says failed again, without actually looking for anything. What can I do? I rebooted the computer and the creative cloud without result.
log out and then back to your application of cc. Retry.
If this fails, follow solution 2, CC Office lists the applications as "up to date" when it is not installed
If this fails, Sign in, activation or connection errors | CS5.5 and later
Maybe you are looking for
-
Camera download pictures to computer in a folder by name of the year only
How can I upload photos to the folder named: 2014_05_02 with photos inside for the day only. My file shows that the year 2014 and the inside 04 or 05, which represents months.
-
How can I download photos in Gallery windows on USB microphone please
HOW CAN I DOWNLOAD PHOTOS IN GALLERY WINDOWS ON USB MICROPHONE PLEASE
-
I read some information about windows vista. Is Somethins I read several times: "while all editions of Windows Vista can support processors multi-hearts, only Windows Vista Business, Ultimate, and Enterprise can support dual processors." So my proces
-
Hello to all, ROM acquistare disco Dell 8WP8W 600 GB SAS 10 K 6 GB/s 2.5 "disk 0B 25656 HUC106060CSS600. You can indicarmi Dove o se e possibile sul portale Dell, link it postandomi? Grazie
-
The virtual keyboard will prevent the display of gestures in some of the screens.
Hello If peripheral BB10 function key a cheap shots left that the keyboard is displayed even if the screen has no control of editfield. How can I disable this behavior on some of the screen. Same issue was discussed below thread, but there is one yea