Cannot replace the authui.dll in the system32 folder

Similar Questions

• Why should I copy of a CVI DLL compiled in the System32 folder?

  Hello

  I've been letting the compiler CVI copy of a DLL (project) in the windows\System32 folder.

  It was mainly to leave more than 1 other executables CVI, installed in different folders under \Program Files\

  Discover and share this code of the DLL.

  In addition, when you build the kit distribution for the DLL, I directed the DLL must be installed in the System32 folder.

  When you introduce this concept in a review to an other software engineers, a mechanic found that the System32 folder should be reserved for windows, hardware drivers, etc.. My CVI DLL needs to reside in the working folder of the executable main partner, or any other location. His concerns were uninstalling and updating process, and if the DLL were at a location specified by the installer, it would be easier to follow, etc..

  I'm assuming that NEITHER recommended CVI to "COPY IN the \Windows\System32 folder. Why?

  Should my fellow engineer some friendly advice?

  [BTW, he used NEITHER CVI occasionally, especially with other languages]

  Thank you ALL

  Scott Youngren with CVI 8.1.x

  Hi Scott,.

  Even if we are aware of them or not, most programs use System32 as their destination of DLL.

  I myself wouldn't mind too much about.

  Have you seen this document?

  You can install to a different location and use the PATH environment variable where you can not convince that system32 is ok.

• Is it possible to add programs to readers separated at the Run dialog box without putting a shortcut in the system32 folder?

  When I want to run something from the Run dialog box, I just type the name of the program.  For example, to use the command prompt, simply type cmd.  But some program I have to type its full path.  The only way around this is to put a shortcut in the system32 folder.  Only, I forgot that I put it there, and I often erase it as a kind of Trojan horse.  I don't like things like nonwindows randomly in my system32.  Is this in any way about this?  I put a shortcut in the %ProgramFiles%, but it seems random with a shortcut to chance here.  In addition, if the shortcut is located in a folder in system32 or %ProgramFiles%, it won't work.  Shortcuts in the %windir%\System32 too much work, but makes me more suspicious of my own files.

  When I want to run something from the Run dialog box, I just type the name of the program.  For example, to use the command prompt, simply type cmd.  But some program I have to type its full path.  The only way around this is to put a shortcut in the system32 folder.  Only, I forgot that I put it there, and I often erase it as a kind of Trojan horse.  I don't like things like nonwindows randomly in my system32.  Is this in any way about this?  I put a shortcut in the %ProgramFiles%, but it seems random with a shortcut to chance here.  In addition, if the shortcut is located in a folder in system32 or %ProgramFiles%, it won't work.  Shortcuts in the %windir%\System32 too much work, but makes me more suspicious of my own files.

  This is precisely what concerns the environment variable "path".

  The applications that you want to be able to run in a directory on your disk to another.  If, for example, you have a dirve D:\, you could create a directory named D:\MyApps and place the executables in D:\MyApps.

  • Open the system properties (right click on my computer > properties)
  • Click the Advanced tab
  • Click the "Environment Variables" button
  • Scroll down in the "System Variables" box until you find the variable "Path".
  • Select 'Path', then click on change
  • Go to end of the text in the edit window, and then type a semicolon followed by the path to the directory you created for your applications.
  • OK your way out.

  Be careful when you change the path variable that you add only.  If you delete the existing path variable (or part of it), it is likely that something no longer works correctly.

• Save dialog box defaults to the System32 folder

  Running Windows 7 x 64, when I try to save a file, it is always default in the System32 folder.

  Office of library & are out of sight, and I have to scroll to see their leading to countless of useless clicks.  I can't imagine why anyone would want to save a word document in System32, so there must be a way to change this?
  
  No opportunities?

  Hi Dave,.

  Welcome to the Microsoft community. According to the description when you try to save a default file it saves it in the System 32 folder.

  ·         Did you do changes on the computer before the show?

  I'll help you with this problem. I suggest you to run the fixit of the article and verify.

  Diagnose and repair Windows files and folders problems automatically

  Let us know if you need help with Windows related issues. We will be happy to help you.

• Take possession of the System32 folder

  I have problems to install things like Visual Studio, the GPU drivers, printer drivers, file transfer from desktop to a folder on the desktop do not let me use or delete the new file, update Windows Defender and who-knows-what else that gives me an error immediately. Understood the problem with the GPU drivers by taking possession of the 'pilot' and 'DriverStore' files in the System32 folder with 'Appropriate' in the context menu. My old PC is running the same OS without any problem at all.
  Tried to buy permissions System32 the usual way, but I get an error. For the "pilot" and 'DriverStore', I used the context menu. It works, but it gives me the permissions (Administrator) AND I (users) defines as the owner. I just want to have permissions to change (installation, etc.) things and let the owner of the same. Now, the owner is not the same thing in other folders. SYSTEM and TrustedInstaler all the way with different permissions for them. Generally 'Users' have 3 permissions, 'Administrator' has 0 permissions, 'TrustedInstaler' has 1 authorization, "CREATOR OWNER" has 0 permissions, 'SYSTEM' has 0 or each authorization. Sometimes, there are even my username with 0 permissions, but especially it is not at all here.

  I already tried to solve crash Visual Studio start in a forum: http://social.msdn.microsoft.com/Forums/silverlight/en-US/7703213f-6977-4e51-a4ea-8c2835b5d383/visual-studio-2012-express-for-desktop-crash-after-startup
  but they pointed me here. Now, I know for some that this mess of property is the problem in all.

  1. is it safe to take ownership of the whole System32 or even Windows folder?
  2. how to set full control in permissions without getting an error?
  3. as a last resort: if I format my HARD drive and do a clean install, will this problem persists? Or is there a way to prevent it from happening?

  1. is it safe to take ownership of the whole System32 or even Windows folder?

  -> No, this isn't. This could destroy your system.
  
  2. how to set full control in permissions without getting an error?
  -> You do not because he didn't need to. To install the software, right click on Setup, then click "Run as Administrator".
  
  3. as a last resort: if I format my HARD drive and do a clean install, will this problem persists? Or is there a way to prevent it from happening?
  -> It's a perception problem that does not exist when you adopt methods applicable to the installation of a program.
  In other words: leave the Windows folder and its subfolders only.

• Access is denied problem on command prompt when you try to overwrite a file in the system32 folder.

  Access is denied problem on command prompt when you try to overwrite a file in the system32 folder. I gave the control of user accounts affecting for never notify his still does not. I am running Win 7 Home Basic 64-Bit please help me get out of here

  You have two options:

  • Perform the action under high administrator privileges.
  • Turn off UAC (not recommended).

  Why would you want to give users the right to modify files in the System32 folder? Sounds like a recipe for disaster.

• Standalone downloaded lightroom 6 on a MacBook Pro. Impossible to get a program to open - an internal error cannot create the required folder.

  Downloaded standalone 6 Lightroom on a MacBook Pro. Impossible to get a program to open - an internal error cannot create the required folder. Any suggestions about how to proceed?

  Hi woodysk

  Greetings.

  • You will need to read and write permissions on the Adobe folders manually.

  Please follow the steps below:

  • Right-click on the icon in the Finder and select the 'Go - To' folder option.
  • You will get a text box, type in the following command and then press the 'return '. (Don't miss ~ symbol)
    • ~/Library
  • Then go to the Application Support > Adobe.
  • Right-click on the Adobe folder, then select the GetInfo.
  • Expand the section sharing & permissions.
  • Click on the padlock icon in the lower corner on the right. Enter your administrator user name and password when you are prompted, and then click OK.
  • Please click on '+' symbol, it will open the list of user accounts.
  • Add all of the user accounts and then give permission to "Read & write" to all user accounts. (If not agree, just add currently logged in username and administrator)
  • Click the gear icon and select apply to closed. Close the dialog box for information.
  • Then launch Lightroom application and check.

  Let me know if still face you any issue.

  Concerning

  Rohit

• Error Lightroom: You cannot create the required folder

  Hello

  I have an error with the Lightroom program. I installed from application cloud creative and seems to be all right. When I open the program I get the error:

  There was an internal error. You cannot create the required folder: / users / lived / Library / Application Support / Adobe / Lightroom / metadata Presets.

  

  Report an error by CAT, but apparently there are problems and not receive messages from operators. They worked on my files internally and now have problems because the app says that some files cannot be synchronized.

  Can someone help me? Please

  Hi viviang,

  Greetings!

  There is a permission problem.

  Try to give permissions to both libraries (library system & user library) and the Applications folder.

  For the Applications folder

  ---------------------------------

  Open Finder

  On the left panel, you will find applications-> folder, right-click on this (CTRL + click) and then click on read the information.

  Inside you will find sharing and permissions - Click on this

  You will find an icon of padlock at the bottom right, click on the lock icon, and then he could ask your mac password, please put to.

  Now, click the little plus (+) and then add the users you want to, please make sure that you add the admin account.

  Give read and write at all.

  Click the gear icon at the bottom of the get info window and choose "Apply to the elements included" it appears a message that the changes cannot be undone - click OK to that.

  This measure will apply privileges and which can take some time depending on the size of the file.

  Once this is done, click the lock icon, and then close the get info window.

  Done with file applications here.

  For the user's library

  -----------------------

  Open Finder

  Click OK at the top of the page and select 'go to folder '.

  Type "~ / Library ' and press go

  Click (CTRL + click) on the library folder, if you are within this library, you can right click (ctrl + click) on an empty space between folders and then click on information

  Inside you will find sharing and permissions - Click on this

  You will find an icon of padlock at the bottom right, click on the lock icon, and then he could ask your mac password, please put to.

  Now, click the little plus (+) and then add the users you want to, please make sure that you add the admin account.

  Give read and write at all.

  Click the gear icon at the bottom of the get info window and choose "Apply to the elements included" it appears a message that the changes cannot be undone - click OK to that.

  This measure will apply privileges and which can take some time depending on the size of the file.

  Once this is done, click the lock icon, and then close the get info window.

  Made with the user here library folder.

  For the library system

  ----------------------------

  Open Finder

  Click OK at the top of the page and select 'go to folder '.

  Type "/ Library" and press go

  Click (CTRL + click) on the library folder, if you are within this library, you can right click (ctrl + click) on an empty space between folders and then click on information

  Inside you will find sharing and permissions - Click on this

  You will find an icon of padlock at the bottom right, click on the lock icon, and then he could ask your mac password, please put to.

  Now, click the little plus (+) and then add the users you want to, please make sure that you add the admin account.

  Give read and write at all.

  Click the gear icon at the bottom of the get info window and choose "Apply to the elements included" it appears a message that the changes cannot be undone - click OK to that.

  This measure will apply privileges and which can take some time depending on the size of the file.

  Once this is done, click the lock icon, and then close the get info window.

  Done with the record of the library system here.

  Please let me know if it works

  Please note: do not just right-click on MAC HD complete and provide all permissions that can bring the MAC in any startup mode.

  Concerning

  Jitendra Khatwani

• FTP - cannot create the remote folder

  Help, please!
  
  I use DW 8 on iMac. When you download my site (using sync or put), all two used to work properly, I now meet the following error message and then I hunted:
  
  "error - cannot create the remote folder / folder name and the path--canceled by the user.
  
  I thought that the file may be corrupted somehow and removed completely from the site. On my next attempt, another file has triggered the same message, and so on...
  
  So I am unable to download my site and the bits and pieces that are on the web are truncated because the site is incomplete!
  
  What can I do?

  You may find it useful to stick with the DW FTP. Having the ability to
  Download up/dependent files is nice, as are the other (select features
  more recent, select recently modified, etc.).

  --
  Murray - ICQ 71997575
  Adobe Community Expert
  (If you * MUST * write me, don't don't LAUGH when you do!)
  ==================
  http://www.dreamweavermx-templates.com - template Triage!
  http://www.projectseven.com/go - DW FAQs, tutorials & resources
  http://www.dwfaq.com - DW FAQs, tutorials & resources
  http://www.macromedia.com/support/search/ - Macromedia (MM) Technotes
  ==================

  "hfeurstein" wrote in message
  News:fe8fti$K3U$1@forums. Macromedia.com...
  > To be honest, I don't know if I am running a firewall, I used to be a PC
  > user
  > but got so sick of stupid software windows, virus, constant need
  > updates etc that I bought an iMac and I can only assume that it is
  > running
  > some sort of firewall. In any case, I can confirm that during that time the FireFTP
  > has
  > completed download with no defects, this is why I would need is more DW.
  > Sounds
  > as if the investment is perhaps not quite interesting for a novice like
  > me
  > who really isn't a developer and just use it for simple tasks.
  > mercy
  > However, I like the ftp Sync feature and would like to continue
  > use it.
  > However, sounds as if there are a few flaws in the software
  > who
  > need to be ironed out.
  >
  > Having said all that, I really appreciate your help and especially
  > responsiveness, which is not easy to find these days. I'll take one
  > additional
  > Advisor you may have and thank you once more our support.
  >
  > Best regards, Harald
  >

• Windows XP SP3, corrupted registry. Corrupt / missing windows system32\config\system - restore via Recovery Console cannot copy files of origin of the system32 folder. Please help.

  When my husband's computer was incorrectly stop we met the ' Windows XP didn't start because the following file is missing or corrupt: \WINDOWS\SYSTEM32\CONFIG\SYSTEM "error message. I understand that the registry is written on the judgment and that it is not rare that the registry damaged during the power failure or abnormal stop. Checking the bandages for details on how to proceed, and begin the process of recovery appearing in theArticle ID: 307545 of http://support.microsoft.com/kb/307545/en-us below:

  «First part in the first part, you start the Recovery Console, create a temporary folder, back up the existing registry files to a new location, delete the registry from their existing location files and then copy the registry files in the repair folder to the folder System32\Config.» When you have completed this procedure, a registry is created that you can use to start Windows XP. This registry was created and saved during the initial setup of Windows XP. Therefore, any changes and settings that took place after Setup has finished are lost.

  The full, first part, follow these steps:

  1. Insert the diskette of starting Windows XP in the floppy drive, or insert the Windows XP CD into the CD-ROM drive and restart the computer.
     Click to select all of the options required to start the computer from the CD-ROM drive if you are prompted to do so.
  2. When the "Welcome" screen appears, press R to start the Recovery Console.
  3. If you have a dual-boot or multiboot, select the installation that you want to access from the Recovery Console.
  4. When you are prompted to do so, type the administrator password. If the administrator password is blank, just press ENTER.
  5. At the Recovery Console prompt, type the following lines, pressing ENTER after you type each line:
     MD tmp
     copy c:\windows\system32\config\system c:\windows\tmp\system.bak
     copy c:\windows\system32\config\software c:\windows\tmp\software.bak
     Copy c:\windows\system32\config\sam c:\windows\tmp\sam.bak
     copy c:\windows\system32\config\security c:\windows\tmp\security.bak
     Copy c:\windows\system32\config\default c:\windows\tmp\default.bak.

  There was no administrator password prompt, but the console began without incident. I was unable to copy these files to a folder. (Yes, I checked my spelling and made certain that the commands, parameters and syntax are accurate.) I created another directory and tested the console by copying the files to repair to the secondary directory. These copied without any errors. I was able to discern that there are no problems with the console itself.  At this point, I'm not sure how to proceed.  There is data that has not yet been backed up and must be recovered where it is suggested to do a new/factory install. Therefore, I need to know if there is another way to proceed to the recovery or if I do a fresh install. In addition, any suggestions on its disk data recovery, if the new installation is the only way to move forward, also would be appreciated. Thank you.

  Just to be clear, when you have tried, for example, to run this command:

  copy c:\windows\system32\config\system c:\windows\tmp\system.bak

  You have an error message (please report it to full) or maybe nothing happened.

  But you did another directory (say 'c:\windows\otherdir') managed by running the following command:

  Copy c:\windows\repair\system c:\windows\otherdir\system

  If this is the situation in which you are in, you are essentially impossible to create a backup copy of the current registry damaged.  This is not the end of the world, because as you can see by reading the full article, you never use these files master anyway.  This step is just included "on the side of caution" so that you can restore the original registry files, corrupted, if for some reason you wanted to.

  Because you cannot start the system anyway, you might as well begin the process described in the article without creating these master files.

  You can either make the step remove first:

  delete c:\windows\system32\config\system

  or just try to copy the files in the directory of repair on the files in the \system32\config directory and answer 'Yes' when asked if you want to replace the existing file.

  Note that the success of this procedure assumes that you run the system restore.  Otherwise, you'll find yourself with the registry as there was when Windows installation - which certainly won't be compatible with the State of your machine today.

  Essentially, what you are doing are the following:

  1. While in the Recovery Console, restore the registry to its state when you first installed Windows.  This allows you to start Windows - but do not try to use any application program.

  2. in Windows, copy of the registry that is saved in a recent restore Point to a location that are accessible by the Recovery Console - but not by using the restore application from the system itself, because with the 'original' registry, System Restore is not aware of these restore points.

  3. While in the Recovery Console, restore the registry using the files you made available at step 2.

  I don't really know what's the point of the stage of section 4, unless it is to use system restore to restore to a different restore point.

  If you can't make things work by following the steps above, or if there is no recent restore points to use in step 2, then you are correct: you must backup your data, do a clean reinstall of Windows, then reinstall your applications with original media and restore your data from backup.

  If you are able to do step 1 and start Windows with its original register, you should be able to use the native Windows tools to backup your data.  I would not use NTBackup, but rather just copy (do not use the 'move' command) data on an external hard drive.  Alternately, you could boot from a live CD of Linux (for example, Knoppix) to access your drive and copy the data.  Or if you have a bootable CD from a like Acronis Disk Imaging application, you can use it.  If you would like more information in this sense, after return.

• cannot replace the print cartridges CP1025nw

  I am trying to replace the print on my HP LaserJet CP1025nw cartridges.  I did several times.  But this time, I can not cartridges suitable for turning in place.  I press any button to specify which cartridge I want to replace, only yellow appears!  I tried switching the printer on and out on, and that did not help.  I really need to replace black, but cannot figure out how.  Any ideas?

  Hi @annie89 ,

  I see that you have problems with the carousel doesn't turn only not to be able to change the black toner. I would like to help you today.

  Make sure that the printer is connected directly to a wall outlet. (do not use a hub or a surge protector) This ensures that the printer is full on and can help this situation.

  You can manually move the carousel, by releasing the locking mechanism. Use something to push it.  Manually, back off the carousel, do not touch the toner however. I have also provided a picture where there are in fact two areas to leave, they are circled in red. The left side is easier to move.

  Cannot remove the ink cartridges.

  

  If the problem persists, I would like to do a hard reset.
  Let the printer and disconnect the printer cable and the wall socket for 60 seconds.
  Reconnect the power cable to the output of the printer and the wall, and not a surge protector.
  This ensures that the printer is full on and can help this situation.

  If you need help, let me know.

  Have a great day!
  Thank you.

• Apple cannot replace the housing/casing of my iPhone?

  I have a 6 s iPhone, and have a mobile phone plan that allows me to level to halfway through my 24-month plan, also for a long time my camera has extremely minimal Exteriors/Interiors damage. And currently I have scratches and bumps on the housing/casing of my phone and I was wondering if Apple can replace the casing/housing and how much it would cost?

  Apple does not replace the metal casing of the phone. If the phone is damaged and does not, they will allow to make a release of purchase of the warranty, as damage to the housing would be damage user, not covered by the warranty. However, if the device is functioning correctly, Apple generally will not allow an out of warranty replacement for purely aesthetic problems.

• Table 3D: cannot replace the 2D subset?

  Hey guys,.

  I discovered a rather strange event (if any). In debugging my code, I stumbled upon my function replace table subset to find that it was the source of my frustration. Either I don't understand how it works for 3D arrays (I use it a lot for 2D, 1 d) or there is a bug. I have attached a picture of the code examples here. I can't replace a 2D picture into my table 3D. I would like to take a page from the 3D and replace it with a page of update / different. The example image is sure to strongly the oddity.

  Any thoughts?

  Regardless of the size of the input array, the result of the table replace never increase the number of items.  You try to grasp the first page, add a line, then replace the first page.  The result is that the replacement is cropped to the initial first page size, if you have a developed NOP (no operation).  Move the entries in your table to build on it and see what happens.

  You can't replace an item that does not exist in the input array.

• Cannot replace the PXI embedded clock with clock oscillator PXI-6682 on PXI back plane

  I installed a module of synchronization PXI-6682 to slot 2 of a PXI-1031chassis with a PXI-8110 controller running hypervisor and RT.  The 6682 is installed on the RT system hypervisor for GPS sync during the measurements, but I would like to ask the TCXO on the PXI-1031 chassis backplane (which replaces the PXI embedded clock).  When I try to run the "Clock.vi route" that I found in the finder of the example, all I get are error messages indicating that a parameter for this operation is not valid.  The Terminal source is "Oscillator" and terminal of destination is "PXI-Clk10_In"  How can I determine which parameter is not valid?  Any suggestions?  Thank you

  Hi vugt.

  You are right that the physical switch determines which one to use and you should not have to route signals.  If you are having problems with clocks after the synchronization module 6682 please let us know!

• HP envy 100 D410a cannot replace the paper path door in the printer!

  Has received a 'false' paper jam message and followed the instructions to remove door paper to address 'paper jam' path (it wasn't any paper stuck).  Now, it is impossible to replace the paper path door.  Help!  Thanks, Brooklynllp

  This door can be difficult to get back up sometimes. The video below will show you how to replace the door on. Hope that helps.

  http://goo.GL/40uv3