Cannot restore from a backup

I cannot restore from a backup and don't know why.

I have a Crucial SSD of BX100 in my mid 2010 MacBook Pro. It is divided into two partitions. I got Snow Leopard on a partition and Yosemite on the other. For some reason any I've never understood the Snow Leopard guarded beachballing partition. This happened if often that I decided to wipe the disk and reinstall from my backup, do it before the beachballing began to occur.

But I can't restore. I wiped the drive of a Snow Leopard system, repaired and reformatted. The drive is not Core Storage, this is Mac OS extended (journaled). When I try to restore the restore on it works for about two minutes and then stops. Finally, I get a message saying that the disc has been ejected incorrectly.

I noticed that when I receive information on the drive, an element appears different from other readers and which corresponds to the element, owners enabled: no each other drive I've seen says owners enabled: Yes. Is it all just because there is no system on the partition?

Also "ignore ownership on this Volume" must be checked or unchecked?

Suggestions welcomed, I am baffled by this.

Snow Leopard erase and install

  1. Insert the Snow Leopard DVD in the optical drive and restart the computer.
  2. Immediately after hearing the chime hold down the C key.
  3. Release the button when the Apple logo appears and wait for loading to complete.
  4. After the installer loads, choose your language and click on the continue button. When the menu bar appears select utility drive in the Utilities menu.  After disk utility charges select the entry out-bumpy in the list aside (mfgr. size ID and disc drive.)  In the right side of the disk utility window, click the Partition tab.  Set the number of sheets to (1) on the menu drop down. Click the Options button and select GUID, click on OK, the value of the Mac OS Extended journaled format type. Finally, click on the apply button.
  5. Once the format is complete, quit disk utility.  Continue with the installation of OS X and follow the directions.
  6. Once installation is complete, the computer will restart in the installation wizard. After completing the Setup Wizard, you will use a new installation of Snow Leopard. Open the software update and install updates recommended.
  7. If you plan to sell or to give to your remote computer, then proceed as follows: once you reformat your hard disk and reinstall Snow Leopard, the computer restarts with a welcome screen. To leave the Mac in a State OOTB (Out Of The Box), do not continue with the Setup program. Instead, press the command and Q keys to stop the computer. The installation wizard will guide you the new owner through the installation procedure, after that it turns on the computer.
  8. Download and install Mac OS X 10.6.8 v1.1 updated Combo. If necessary. It is not necessary if you are selling or giving your computer away.

Tags: Mac OS & System Software

Similar Questions

  • Help restore from iCloud backup iPod touch iOS 6.1.6

    Do to restore an iPod touch from backup, using iOS 6.1.6?

    Yes, as long as the device that does the backup iOS 6.1.6 and during restoration iOS 6.1.6 or later

    To restore backup see:

    Restore your device from an iCloud or iTunes backup - Apple Support

    https://support.Apple.com/en-us/HT204184

    If you restore from a backup of iCloud apps will be automatically downloaded. If you restore from backup iTunes, applications and music must be in iTunes since synchronized as music media library and apps are not included in the backup of the iOS device what iTunes does.

    You can re-download most of iTunes purchases by:

    Download after purchase from the App Store and iTunes Store iBookstore

    https://support.Apple.com/en-us/HT201272

  • Restore from iTunes backup application corrupted

    I have an update application that can be bad and want to restore from a backup iTunes just that App. Is this possible and if yes, what is the process?

    Thank you. Best regards, R.J. Wilson

    Synchronize the iTunes app.  You may need to remove the application on the device first otherwise iTunes may think it's already there.  If it is a current application, you can also re - download it directly from the iTunes Store with your device via iCloud.

  • I did a clean install of Mavericks and CC restored from a backup, and can not get one of the applications to load at all.

    I did a clean install of Mavericks and CC restored from a backup, and can not get one of the applications to load at all.

    properly install adobe products.

    at this point, just uninstall cc on your computer, clean by use the CC cleaning tool to resolve installation problems. CC, CS3 - CS6 then install the application of office cc, https://creative.adobe.com/products/creative-cloud

    Use the desktop application to install your programs of cc.

  • cannot restore from time machine

    MacBook pro 10.11.3 time machine backup data of the computer but cannot restore when entering time machine.

    When you select an item and click on restore, nothing happens?

    What you save up to? Some may not restore from a NAS device.

  • You forgot to turn off pairing Apple Watch - I can restore from a backup of Icloud?

    Hi, I have a 1st generation Apple Watch Sport 38mm.  Recently, I sold my 6 s Iphone in anticipation of the arrival of the Iphone 7.  In my haste, I forgot to turn off my Apple Watch match before sending it away.  I have been using a loaner phone while I was not able to restore from Icloud because it doesn't have enough memory so I have just set up as a new phone.  When I paired my watch with her that I had to reset as I was not able to select a backup (because it's not because I didn't have it odd).  I'm afraid now that I've lost all my previous data.  Do you know that if I can restore my Apple Watch from a backup to Icloud - I won't be able to try this until I get my new phone, but just pray that I can choose a backup for my watch from my phone when I put in place?  Thank you very much

    Hello

    When you pair your watch with your new iPhone (after restoring your backup to iCloud), you can choose the option to restore from backup if he is offered throughout the entire upward:

    Set up your Apple Watch - Apple Support

    (There is no backup separate from your watch - it is part of your iPhone backup).

  • iPhone 4 cannot restore from iTunes

    I'm trying to restore an iPhone 4 from iTunes, but I forgot the password. But when I try to restore it, it asks me to disable find my iPhone, but I can only do as I forgot the password. I want to restore it from a backup, and I do not want to reset to factory settings as there is a lot of data app I want to keep. It is not connected to the Internet somehow, since there is no way for me to connect to WiFi without knowing the password, and I have no valid SIM that fit in this. So I can't remove it from iCloud.com or any other device. I tried to turn it off by intentionally entering the wrong code several times, but that makes my computer does not recognize my phone at all. I did somehow your phone is more off making it run out of battery. The Apple ID was transferred to my account at my son's account (we have family sharing) some time ago and all backups are in the iCloud and without spare parts on my computer.

    Is their anyway to back up the phone on my computer without entering the password, so I can't erase the phone by other methods and that restore with backup on the computer? Thank you in advance.

    Phone: iPhone 4 running ios 7.1.2

    Computer: Toshiba Satellite C75 running Windows 10 (but not the last

    Software: iTunes 12.4.3.1

    Sorry but there is no way to bypass the blocking of Activation.

    Find my iPhone Activation Lock - Apple Support

  • How to restore from a backup after creating a new Raid 0?

    OK so I have time machines of my old hard drive, installed my new and raid 0' ed them. Now I Steelworkers my bootable thumbdtive (who was be Yosemite) to start my el capitan backup and it crashes at the end. After the restoration, the computer stops and recharge, but then crashes to the screen with the apple logo. Someone knows the right way that I should be restore? I tried just do a plain redownliad of my bootable disk but it says it did not work and may have been corrupted. I tried deleti g and recreate my raid 0, the same message... Looks like that because raid 0 for Mac will not create a recovery partition, I do a recovery Internet now just to recharge the mac from scratch... Any ideas on how I should address?

    Hi Isakale,

    I understand that you're having trouble for OS X installed and restored from your Time Machine backup. In a situation where you work with a configuration of non standard volume for your OS X installation, you can consider installing OS X of the recovery of the Internet, the upgrade to the desired version of Mac OS X via the App Store, then your Time Machine data migration using the Migration Wizard, rather than recovery.

    Migration Wizard copies all your files to your new Mac so that you do not have to the do it manually. If your files are currently on a Windows PC, follow the steps in the migration of the PC instead. If your new Mac uses OS X Mountain Lion or earlier, follow the steps of Mountain Lion instead.

    Move your content to a new Mac
    https://support.Apple.com/en-us/HT204350

    Recent Macs include the ability to run directly from a Web OS X Recovery version. Your Mac will automatically use this feature when the recovery on the startup disk system is not available. For example, if your boot drive is a problem, or if your boot drive has been replaced or deleted. Recovery of the Internet allows you to start your Mac directly from Apple servers. This system starts running a quick test of your memory and the hard disk to check for hardware problems.

    Recovery of the Internet initially asking you to select a Wi - Fi network and enter a password for the network if necessary. Then Internet recovery downloads and starts from a system recovery image. From there on, offers the same options and utilities like system recovery on a startup disk.

    Some Mac shipped with OS X Snow Leopard can use Internet after installation of OS X Lion or later and a software update.

    OS X: on OS X Recovery
    https://support.Apple.com/en-us/HT201314

    If you want to reinstall the version of Mac OS X included with your Mac, store the command-Option-R at the start instead. This starts your Mac recovery of the Internet.

    How to reinstall OS X on your Mac

    https://support.Apple.com/en-us/HT204904

    Sincerely

  • If I buy a 6s and restore from a backup on computer, I also get old iOS?

    I have 8.3 on my current iPhone 6. I'm considering upgrading to a 6 s iPhone, but I don't particularly like iOS9. If I restore from the back up on top of computer, will I have the old iOS? I don't think that it really works it, but I'm not positive. Thank you!

    No, you will not get the previous iOS, only data from the backup.

    See you soon,.

    GB

  • How can I backup files, and then restore from that backup AFTER reformatting?

    in the past, I tried to restore files from a backup, I did just before reformatting. but when I tried to restore the files, the last backup information obviously wasn't there, so I could not restore the backup on my external hard drive files. I don't remember the exact message I got, but I think it went along the lines, "unable to find a current or previous backup for this computer. You might have changed hard drives or computers or devices to backup since your last backup, or files you want to restore are from another computer. ». Fortunately I saved stuff that was really helpless as my photos, music and game configs.

    so is it possible to run a backup, reformat the computer, and then restore the backup Dome before reformatting?

    I hope someone can help!

    -Graham

    Hello

    ·          You did a normal backup or was it a complete PC image backup?

    Clean boot the computer and then try to restore

     

    Follow step 1 in the link below,

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    http://support.Microsoft.com/kb/929135

    Note: Please make sure that the computer is configured to start as usual by following step 7 of article.

  • How to restore from a backup

    I was wondering how to restore files from automatic backup provided by windows vista Home premium.

    Basically, I have a computer with 2 physical hard drives running windows vista Home premium.  I had backups automatic windows implemented non-system hard disk.  The system drive got accidentally erased.  I reinstalled windows vista Home premium on a new hard drive. However, I don't know how to restore the files that I had previously saved.  Could you link me to a tutorial or process step by step on how to proceed?
    Thank you

    Salvation Church,

    You can restore backed up files lost, damaged, or accidentally modified versions. You can restore files individual, groups of files, or all files that you have saved.

    1. open the Center to backup and restore by clicking the Start button, clicking Control Panel, clicking system and Maintenance, and then click Backup Center and restoration.
    2. click on restore and then follow the steps.

    You can see the links below for more information:

    Restore files from a backup
    http://Windows.Microsoft.com/en-us/Windows-Vista/restore-files-from-a-backup
    Backup and restore: frequently asked questions
    http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-and-restore-frequently-asked-questions

    Please post back and let us know if it helped to solve your problem.

    Kind regards
    KarthiK TP

  • Restore from a backup

    Hello

    I'm new to UCS and I currently see how to restore a Cluster FI from a full-State backup.

    After that I have clear the configuration on both primary and secondary, I import the configuration of my file backup successfully.

    But now, I wan´t to add the secondary FI. After start of the console configuration and answered to the question if I have wan´t at the END added to the cluster with Yes, nothing happens. She takes one our to complete the installation of the second home. It seems that there is a timer or something like that.

    Is there any command that I can use on my primary FI to reconnect to the secondary or do restore much faster?

    Thanks for your help

    Frank

    Hi Frank,.

    You do well, the process to add a second FI after the restore of a backup can take time sometimes.

    The last time I have made I've waited almost an hour without any message until finally complete the process. Unfortunately, there is no command to display a progress bar or status messages.

    Richard

  • restore from RMAN backup

    Hello

    We communicated in code. For this we will have option rollback is that take a full RMAN backup and restore the backup in the database. This is to check if we can able to recover the database before the output of code.

    10.2.0.4 database
    AIX OPERATING SYSTEM

    There is no change in the locations of the files (control file, file data, all). on the same server and the same database.

    Just to recover from a backup.

    can you tell me how we can get there.

    Hello;

    RMAN point to the recovery time.

    Example of

    Connect to RMAN
    
    RMAN> startup mount;
    
    RMAN> restore database until time "to_date('5-NOV-2012 11:23:00','dd-mon-rrrr hh24:mi:ss')";
    
    RMAN> recover database until time "to_date('5-NOV-2012 11:23:00','dd-mon-rrrr hh24:mi:ss')";
    
    RMAN> alter database open resetlogs;
    
    Note:
    
    You should perform a full backup.
    

    Best regards

    mseberg

  • restore from old backup files

    Hello

    I backed up the entire database in ' / u01/backup/%s%d.dbf ' in shape and then moved to another directory as "/ u02/old_backup /...» ». after restore spfile and autobackup controlfile controlfile, who I can tell rman backup files are in this directory ("/ u02/old_backup /...") ») ? and restore from that?




    When I run 'restore database', there show me:

    RMAN > restore database;

    From restoration to 23-SEP-08
    allocated channel: ORA_DISK_1
    channel ORA_DISK_1: sid = 586 devtype = DISK

    RMAN-00571: ===========================================================
    RMAN-00569: = ERROR MESSAGE STACK FOLLOWS =.
    RMAN-00571: ===========================================================
    RMAN-03002: failure of the restore command at 2008-09-23 15:28:01
    RMAN-06026: some targets not found - abandonment of restoration
    RMAN-06023: no backup or copy of the file 4 found to restore
    RMAN-06023: no backup or copy of datafile 3 found to restore
    RMAN-06023: no backup or copy of datafile 2 found to restore
    RMAN-06023: no backup or copy of datafile 1 found to restore

    THX in adv.

    Catalog starts by ' / u02/old_backup /' noprompt

    Khurram

  • Understand the Office 365 on new iPad restored from a backup

    When upgrading to a new iPad and restoring from iCloud, is the new count of the iPad as an additional device to Office 365 description, or if he reads the same device? If a new device, is there a way to remove the old iPad account Office 365 to does not exceed the limit of device for the Office subscription? Thank you very much!

    Hello. This may actually be an issue for Microsoft, since it's their subscription.

Maybe you are looking for

  • Punkbuster Satellite A100-192 - Call of Duty 4 - questions

    I bought call of duty 4 for play online and I m unable to play due to problems with the punkbuster client.PunkBuster installs with the game itself, but the service does not start.He thought maybe something to do with the game, so I decided to try ano

  • Re: Satellite L750D - driver after WIn8 upgrade issues

    Hello I use a Toshiba laptop (model: Satellite L750D psk4ye). Yesterday I spend this Windows 7 to Windows 8 pro (32 bit). I installed a driver but when I try to install my driver VAP (value added package) & pilot pc health monitor it doesn't. I try o

  • Audio on Compaq CQ58

    I am having some problems with the sound on my Compaq. If I go to Device Manager and disable then enable the audio display intel and realtek HD audio sound SOMETIMES then comes back, but not always. Does anyone know how to fix this?

  • ID of LOST blackBerry Smartphones

    After a year without a job, I came back to my BB Torch 9800 (PRD-27603-034 RCY71UW / IC:2503 A-RCY70U / BT MAC: 3D 55 CC AD 45 60 / FCC ID: LCARCY 70UW), but I lost my ID, I mean, not really. I sold for a temporary friend who canceled the operation a

  • BlackBerry Smartphones font size incoming call

    All of a sudden, it's really small on Storm 2. Can't seem to find a way to increase the font size of incoming calls, it was bigger, and I don't think that I changed it!