Cannot restore iPod 1st generation ispw file

Hello

I am on windows 10 and could not restore iPod touch 1st generation no matter what ispw file. I received the error 1600 and error 20. I tried to restore in DFU mode and recovery. Is the files I've tried damaged in any way, my iPod or iTunes? I tried this on several versions of iTunes to see if older is my device supported better. Any help would be great!

Do not try and download ipsw from anywhere otherwise than through iTunes. You don't know what you have found. Also, check out this document to support for your error codes. Get help with iOS update and restore errors - Apple Support

error 1600 is an error of USB, but error 20 is a hardware error. You may not be able to recover from this one, however follow the troubleshooting steps in the support document and try. Otherwise, you will need to make an appointment at the Genius Bar to the nearest Apple Store for assistance.

Tags: iPod

Similar Questions

  • Mini Mac doesn't have firewire port to restore my iPod 1st generation

    I have a very old iPod (first generation, I think, with 4 buttons below the screen and a scroll wheel).  I want to restore the iPod and erase all my music and other data before giving it away to a computer reuse and recycling instead.  When I try to do with iTunes, I get a message saying that I need to connect with Firewire.  But the firewire on my iPod cable connection does not fit the ports Firewire on my Mac Mini to 2012.  Is there another way to restore?

    I have a very old iPod (first generation, I think, with 4 buttons below the screen and a scroll wheel).

    It's actually a 3rd gen iPod, if these four buttons are round buttons touch (this orange glow), in a row between the screen and support on wheel.  It has a connector dock, as later iPods, but he charges that a port FireWire, and you must connect to a FireWire port when you perform a restore.

    You need to connect it to a computer running iTunes to do a restore.  If your Mac mini has a FireWire port, FireWire 800.  You need an adapter like this one, to convert it to a FireWire 400.

    http://eShop.MacSales.com/item/NewerTech/FIR1369AD/

    (You must also FireWire to home cable supplied with iPods).

  • My 1st generation iPod touch can not save on my iMac El Capitan but can to my MacBook Snow Leopard ' 08. Why the iMac think that the backup is corrupt?

    Of course, I'm using my iMac El Capitan, but when I bought the music today and went to add to my iPod touch iTunes ended up freezing. Long story short, I could delete the files from the iPod but can not add one; Adding a single song led to suspended iTunes and the cancellation of the synchronization via the iPod of course makes no difference.

    After going through all the rigamarole any attempt to delete all backups for iPod, both through preferences and in/Library/Application Support / MobileSync / Backup, I always had the same problem. I can't add music on my iPod via the iMac, nor can I save it there. Yes, I rebooted.

    And so, after many tears, I pulled out my MacBook ' 08, who narrowly missed the cut for El Capitan and so still has Snow Leopard. And now my iPod backed up very well! (I cursed myself for not to copy previous backup before it was replaced, but hey.) They are all under the same Apple ID, so at this point, I'm simply redownloading all of my new purchases on the ol' MacBook ' so I can add it to the iPod... but how long this will be a viable solution? (I realize using products Apple since 2008 is an affront, but you've got to do what you do I do, and I don't currently have pocket for 32 GB change.)

    So the question. Is there an incompatibility of software between my 1st generation iPod touch (3.1.3) and my iMac (El Capitan with iTunes 12.3.2.35 10.11.3)? Is there really a degree of corruption here than Snow Leopard with iTunes 10.6.8 11.4 (18) does not recognize?

    TL; Dr: I can do my iPod touch backup of my iMac?

    (My apologies for what is the format, I still haven't managed to brevity, and these a few hours researching in it made me frustrated).

    Edit: I forgot to mention that I tried to copy on the backup freshly prepared from the MacBook on the iMac and received the same exact error message.

    See:

    Sync 1 G iPod touch with iTunes 12.3

  • 1st generation ipod touch is stuck

    I have a 1st generation ipod nano. Holi button is stuck waiting and I can't use the ipod controls. I have a dock that I use on but don't have a charger for it, so I don't know if I can access the computer.

    The Hold switch may have become defective.  See if you can do this procedure to Reset (reboot) iPod (data are not erased)

    Learn how to reset your iPod - Apple Support  (see iPod with a click wheel)

    If this doesn't help, you need a USB docking cable to connect it to the computer, to access with iTunes and attempt a restore.

    NOTE: If this iPod nano is really 1st gen, it can be considered for this

    https://www.Apple.com/support/ipodnano_replacement/

  • Restore backup after the reset Time Capsule (1st generation) using Windows PC

    I apologize if this question is somewhere already. I tried to find an answer and I've seen similar discussions but not exactly what I need.

    A bit of history... The location is a small school with about 10 cameras, its network systems, point of sale, cloud networked storage, etc. Was asked by the owner to create or activate a Guest WiFi SSID. They said he worked at the same time, but some work was done by a previous technician and they lost the WiFi of comments.

    So I used the Airport utility to access the time Capsule. However, after the change to the next level (enable the public IP sharing? maybe?), he ended up destroying the entire network, as in nothing was back upward when the utility scanned for devices. Even the Time Capsule was not recognized by the utility. I ended up doing a hard reset on the Time Capsule and do my best to manually configure the device again, even though I was not initially designed the network. I have also discovered that 1st generation Time Capsules have no comments WiFi capabilities.

    To make a long story short (too late... "I know sorry..) .. I got most of the features, functions, etc. on the network back where they were before, with the exception of camera systems and a network storage device active cloud to the owner's House.  What I would like to know is... Since then, I understand that a hard reset does NOT erase the backup or other data on the shared disk in the time Capsule... is there an easy way to restore the settings of all of the time Capsule before the problem occurred?  I would need to do this using a Windows computer.

    Any help will be greatly appreciated. What I'm trying to avoid the most is having to reset all the cameras, which are upstairs, hard to reach areas. I guess that people who were previously assigned on the cameras must still be there. If only I could get the Capsule of time exactly where it was before he went down, which would allow me to save a lot of time and frustration.

    You can also (2nd choice)... If there is a simple way to detect the active network cameras and other devices on the Time Capsule and pull the IP out of them, that would be helpful as well.

    Thanks in advance for answers!

    What I would like to know is... Since then, I understand that a hard reset does NOT erase the backup or other data on the shared disk in the time Capsule... is there an easy way to restore the settings of all of the time Capsule before the problem occurred?

    You have my sympathy all...

    Been to this place before today... and I always get myself into it by pure stubbornness... I should just walk on some of these jobs and tell them too hard...!

    What you had to do was to export the configuration before you start playing. Without export of the configuration there is not much hope of healing to less than the previous tech saved a configuration to the unit... This example gets much delicate.

    The TC is actually able to contain several configurations... There is a good chance, however, that wipe you the.

    Anyway... coming to the serious Tin. (same version on Mac and PC utility should work the same).

    Here's my TC who foolishly a reset.

    When I do something... first manual configuration, I wonder is to revert to the previous version.

    You have done or could you saved the previous settings as a profile... I hope that you did... in the hope...!

    IF so, you have a saved profile.

    In the area of the top menu go in manage profiles.

    Now, if you are lucky or did the job just last time... by accident... you'll have a saved profile... Just click back.

    If nothing is there, or it's current settings... Sorry, but you didn't know something was there... and you cannot was expected to know the trouble you would get yourself in.

    If you have changed a setting in the TC of the bridge in router mode...

    (enable the public IP sharing? maybe?)

    Getting back to what it was... mode bridge being the most common.

    At the bridge of the TC does control most things... and you need to return to the main router.

    If the TC kicking upward a stench to return to the bridge, reset it simply still once and then bridge will work... It would be useful to loads to remember what was the setting... just to see the bridge takes the TC of the equation to know where the cameras are.

    If the cameras are on static IP, they will respond to a ping scanner... If the primary router is configured for a standard range of IP addresses... 192.168.1.xxx some.

    Then the TC in bridge must have also taken an ip address in this range and the cameras (Ethernet or wireless)?

    I hope that ethernet, but if they were using the TC as a wireless access point, unless you know exactly the SSID wireless as it was in the past then you do not have this info...

    Look at any computer, they have in the building that was running wireless and watch all the SSID that they use... one of these is likely the TC and you can restore this name.

    Or drop a camera... and ethernet allows to connect to him... and find the ssid, that it's been fixed... redefine the TC on this name (SSID) wireless security... all cameras must be able to connect to it... and you can then restore the entire system by connecting to the IP address that will be displayed in the list on the main router.

    Good luck.. as says Han Solo... you'll need!

  • 1st generation Apple TV cannot connect with the apple ID

    Have 1st Generation apple TV and recently cannot connect with my apple ID.

    The reset several times and nothing.

    Help?

    You have activated 2 no authorization of your Apple ID? If so, disable the connection from a browser and temporarily, then connecting ATV, then reactivate. If not, please describe what is happening when you try to connect. What message do you have?

  • 1st generation ATV dead. Orange light but no screen and no resetting of distance.  I tried direct connection to Mac and iTunes open and he's not here.  Is it possible to restore to the factory without screen or remote work

    1st generation Apple TV is dead. Orange light but no screen and no resetting of distance. I tried direct connection to Mac and iTunes open and he's not here. Is it possible to restore to the factory without screen or remote workin

    I guess you tried maintained low men together for about 6 seconds - silver 1 ATV that will restart to the diagnostic partition but who would rely on the hard disk is functional and if it was ok that wouldn't work with the logic board failure.

    I guess you have not fed and attempted to restart.

    In case your AppleTV think it is paired with another remote try Menu and left arrow for 6 seconds - the light now intervenes when you press the buttons on the remote?

    Also, it could be in the video mode bad - try Menu and upward arrow together for 6 CES switch video modes, but implies that he actually started OK.

  • I recently got my restored iPod and now I'm trying to open it. He tells me that my Apple ID, once I have try to connect, cannot be used on my IPod. I NEED HELP!

    I recently got my restored iPod and now I'm trying to open it. He tells me that my Apple ID, once I have try to connect, cannot be used on my IPod. I tried to remove the device from my iTunes account and change my Apple ID but nothing works. But I still want later to register my ipod to my itunes for re account - download all my songs and others. I don't know what else to do.

    You need to use the recovery of modified ID used in environments > iCloud on the iPOd.

    If you have forgotten your Apple - Apple Support ID

    If you forgot your Apple ID - Apple Support password

  • Cannot restore backup files. Error: delete the Mediaid.bin file.

    Original title: cannot restore the backup of the external hard drive files. Converted from Vista to Windows 7. Download error concerning "" folder Mediaid.bin which must be removed before I can restore the files. Help!

    Cannot restore the backup of the external hard drive files. Converted from Vista to Windows 7. Download error concerning "" folder Mediaid.bin which must be removed before I can restore the files. Help!

    Hello

    Follow the steps given by Ki Chi Leung on 22 rd February 2010 at 16:07 in http://social.answers.microsoft.com/Forums/en-US/w7performance/thread/5e368f95-5142-4b9f-afb2-ccff9b646433

    Diana

    Microsoft Answers Support Engineer

    Visit our Microsoft answers feedback Forum and let us know what you think.

    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • Hey I have a problem with the library, when I try to enable the creative cloud desktop application it keeps saying "cannot restore the file: C/users/USER name as the location of the file is not available."

    Library Eroor.jpg

    This is a double post of a following:

    Hey I have a problem with the library, when I try to enable the creative cloud desktop application it keeps saying "cannot restore the file: C/users/USER name as the location of the file is not available."

  • IPod 4th generation cannot install apps I need to I have updated to ios 7 help

    IPod 4th generation, try to install an app for the new toy son... message says need ios 7, but OIDP updates only 6

    Download to a computer or a more recent iOS device, click hereand try the instructions. If they do not work, contact the developer.

    (137723)

  • Cannot restore file bkf NAS to Vista Home Premium disk XP

    I have a HP Pavilion a6220n PC desk top running Vista Edition Windows Home Premium.  Exploitation is corrupt is a couple of weeks, and I haven't had a recent backup of the C drive.  (I know...)  In any case, I could take the Vista machine's hard drive and connect it as a second hard drive on my XP machine.  Then, I was able to make a file bkf HD Vista on my 1 TB MyBookLive NAS drive.  Then I put the HD Vista on the Vista PC.  And I was able to run the recovery partition recovery procedure.  Of course, he wiped the C drive but Vista works again like factory.

    So now, I need to restore the file the MyBookLive drive on the Vista machine bkf.  I thought it would be easy.  I discovered that the restoration of Vista does not recognize the bkf file types.  But the Vista restore utility had a link explaining that I could download a backup NT and restore and it would be able to restore a bkf file type in a Vista machine.  So I downloaded the NT utility.  But when I ran, the NT utility doesn't seem to be able to find the MyBookLive disk.  It does not seem to have all the options restore from a network drive.

    So my next bright idea was to buy a Toshiba 1 TB USB HD.  I figured I'd just copy the NAS MyBookLive to the Toshiba HD bkf.  I tried on the XP machine, and I got an error that says I don't have enough disk space.  I guess this means that the C XP disk doesn't have enough free space, because the MyBookLive and Toshiba HD have enough free space.  Moreover, the bkf file is LARGE (355GB).

    OK, so I decide to use the Vista machine to copy the bkf file.  I can map to the NAS MyBookLive and see the bkf file.  And the Toshiba HD is automatically recognized by Vista.  The C-drive Vista has 327 GB free.  And again, I got the same error - not enough disk space.

    I started to compress the bkf file in a file of rar on MyBookLive, using the XP utility.  Original estimate was 66 hours remaining.  I decided to give up this idea because I don't know if it will even work and wouldn't wait for 66 hours to find out.  My hope was that if the compressed file was smaller, so I could copy the compressed on the Toshiba HD.

    So here I sit with a disk network MyBookLive bkf file.  And I need to restore this information on the Vista machine.  If anyone knows how to restore directly from the network drive MyBookLive to the Vista, which would be preferable.  Next ideal if anyone knows how to copy a file, bkf 355GB since the network MyBookLive on the Toshiba USB HD drive, then I might be able to restore from the Toshiba USB HD on the Vista machine.

    Any ideas would be appreciated.

    GEEK SQUAD came to the rescue. Agent Hugo Westminster, CO Best Buy suggested I get the error "insufficient disk space" because USB Toshiba HARD drive is formatted in "FAT32" format of file at the factory.  He recommended fitness to "NTFS".  I did and was able to copy the large bkf file (it took about 12 hours).

    I have now connected USB Toshiba HARD drive into the Vista machine.  And "NT Backup and Restore" was able to recognize it.  It is now trying to restore the backup of the files on the desktop to Vista PC.  I'll know in a few hours if the restore was successful.

    The restore operation did turn out to be successful.

  • I try to install the latest version of flashplayer on my 1st generation Kindle Fire.

    I try to install the latest version of flashplayer on my 1st generation Kindle Fire. The file downloads but get the error message saying cannot open the file. According to the site, I'm on Mac osx, but I tried in Windows and MAC with the same result. No idea why this is happening? What are the possible solutions?

    Flash Player for Android 4.0 (11.1.115.81) 11.1

    It is more recent (and LAST) that will work with a 1st Gen Kindle.

    1. it's not "later". More later (12.0.0.43) does not work on Android.

    2 android OS is no longer compatible with Flash Player, so if you need to recharge, you will have to use the version of olde link above.

    Flash content playback is very non-rational processor and it drains your battery, also shorten the life of it. Android (Google) recommended "The Dolphin" or "Puffin" as your browser if you need to display Flash content with a motive under Android. They are both free in the GooglePlay store. These browsers use the rendering of the 'server-side' to reduce the load on the device.

  • If I sell or give my Mini iPad (1st generation) with more cellular WiFi (Verizon) can I keep my SIM card?

    If I sell or give my Mini iPad (1st generation) with WiFi cellular (Verizon) can I keep my SIM card? OR once I deleted everything out of the device, the SIM card will be ready for a new user and all my information have also been deleted?

    Yes, keep the card. The new owner is their own SIM for the device if you wish.

    Make sure you follow all the steps here to ensure that the device is not locked for the new user. What to do before you sell or give away your iPhone, iPad or iPod touch - Apple Support

  • Cannot restore iphone6 sauvegardΘ - out of memory

    Hi all

    I lost a few messages on my iPhone somehow and I try to restore from dos, I done a week before and quantified for the first time.

    When I click on the restoration of the back to the top and enter all passwords I get "restore in progress" on the phone, but after a minute or two, it then comes up:

    Cannot restore backup to Gemiphone not enough space on the phone.

    That is rubbish because there is a lot of space on my phone.

    Someone at - he had this? know any way to move, unfortunately is not another upward which is recent

    All advice appreciated, or decent applications that retrieve texts might be good too.

    Thank you

    GEM

    Suggest following the steps detailed here:

    If you are unable to make a backup of your iPhone, iPad or iPod touch - Apple Support iTunes

Maybe you are looking for