Cannot run Aero themes - windows desktop manager disabled

Similar Questions

• Cannot run Aero error - Desktop Windows Manager is disabled

  original title: error Aero

  My system meets all the requirements to run Aero in Windows 7, but I'm not able to run aero. The convenience store said: "Desktop Windows Manager is disabled.". He said that the problem has been resolved but sill no aero. Any help? My specifications: RAM: 1.75 GB, graphic: SiS Mirage 3 Graphics [256 MB] with WDDM 1.0 driver. Any help?

  There is of course no answer to that.   I can't get Aero to work, I was now looking and tried solutions for two weeks now.

  I just built my new office and it's max-out right to the end and now Aero.  However, it plays every high-end game very.
  GPU:
  ASUS GeForce GTX 550 it Direct CU 1024 GB, the memory Bus width is 192-bit memory 1026 MHz, clock 975 MHz Core clock (and can overclock), the GPU is a GF116.
  The title of the info of the performance, I have a graphics rating of 7.4 for Aero Desktop and Enterprise 3D and games.
  MOB
  Fatality z68 professional gen3.
  CENTRAL PROCESSING UNIT
  I7 2600 k
  Memory
  16 GB (memory) Sniper 8 (4 x 4 GB) DDR3 F3-10666CL9D-8GBSR 9-9-9 - 24 - 2N @ 1.5V
  HARD DRIVE
  WD3000HLFS Western Digital 300 GB 10 000 SATA II k
  POWER SUPPLY
  Fatality 750watts. Is a diet OCZ 750W - ATX12V / EPS12V - SLI Ready - 80 Plus Bronze certified (OCZ750FTY).  A constant tension on rail
  
  
  OPERATING SYSTEM
  Legal copy of Win7 Ultimate 64 Bit
  Blu ray
  LG BD - RE BH10LS30
  CASE
  is the white NZXT Phantom
  So why can't use Aero?   According to the ShreyasMohanty , I tried that and more as uninstall the drivers, in Exchange for the video in an ASRock Gen7 M0B card and worked with Aero exchanged the map with supplier even on the two M0Bs tried in an ASUS PQ - THE worked after some fiddling.    Have you tried the GeForce GTX 550 Ti in five different M0B and go sometimes first it has Aero, another time after playing for awhile it works with areo, regarding the Fatal1ty Z68 M0B, nothing works.  I tried the new hard drive GPU etc...  It's something in the windows which is F'ked upward.
  (While typing it and install the new system)
  Coincidentally, I just found this...  A clean installation of the operating system with no pilot other generic drivers for Windows7, go put the highest resolution and Areo works... YEPPY!  Must put the resolution to the highest settings
  BUT!
   As soon as I do a Windows Update and I am at square.
  I will uninstall the obvious updates that could be at fault and see what happens.  I might be inclined to publish in a few days if I find out who it is...
  MS you have done it again
  My next machine will be an iMac... They work!  ... Well I said.

• Disabled Windows Desktop Manager

  I have a laptop Windows Vista (Home Premium) and we were all working fine until recently I noticed that the windows Classic theme was back. Also, when I had it color and appearance of windows aero settings is blackened and 3 small windows are not displayed. After you run the difficulty Microsoft is Aero and visualization problems. He said that the Director of Windows desktop has been disabled. As you can see below, I tried many things to get it working again;

  * Microsoft Fix its Aero and visualizations

  * Use of CMD: Net Start/Stop uxsms

  * I also checked the services.msc and Windows Desktop Manager and themes are running.

  * The new values of string in REGEDIT

  * Another user account

  * System restore

  If someone could help it would be greatly appreciated so I can recover my aero theme.

  Thank you.

  I have a laptop Windows Vista (Home Premium) and we were all working fine until recently I noticed that the windows Classic theme was back. Also, when I had it color and appearance of windows aero settings is blackened and 3 small windows are not displayed. After you run the difficulty Microsoft is Aero and visualization problems. He said that the Director of Windows desktop has been disabled. As you can see below, I tried many things to get it working again;

  * Microsoft Fix its Aero and visualizations

  * Use of CMD: Net Start/Stop uxsms

  * I also checked the services.msc and Windows Desktop Manager and themes are running.

  * The new values of string in REGEDIT

  * Another user account

  * System restore

  If someone could help it would be greatly appreciated so I can recover my aero theme.

  Thank you.

  Thanks anyway. I solved this problem by using an application called vista Glazz who patched theme files if you are able to use third-party themes on your machine.

• How to: enable windows desktop manager

  Original title : where can I find the Windows Office... Manager aereo tells me it is disabled and must be enabled

  With a graphics problem

  When I run the troubleshooter to areo, it corrects all but he always tells me that desktop Windows Manager is disabled.  Need to activate it, but can't figure out how.

  It's on a laptop Toshiba Satellite P775 program-S7360.  The graphics problem arises only when I use dragon naturally speaking software.  I can run areo convenience store and the problem goes away until I have shut down dragon and reopen it.  Help... I'm not a geek.

  Desktop Manager is disabled

  Button to start, in the search box, type SER... press Enter... do scroll to the window of office... click it

  topic status, it should say... Has begun
  under Startup Type, it must be said... Automatic

  Otherwise, left side, click on the word in color blue restartalso, right-click in the window... Properties...

  in startup type, click on the pointer, and then select Auto
  under Service status, click Start

  OK when finished.
  Services output window.

• Black screen - cannot run Explorer.exe with Task Manager

  Hi guys

  I've been Googling the answer to that for the last day and nothing seemed to work.

  Basically, my portable was working fine until this morning, when I restarted. After the home screen, just a rear screen with the mouse. CTRL ALT DEL and everything still works normally. I can run programs with the Task Manager, but can not run explorer.exe. He returned in the process for about 10 seconds then disappears. I think that it is the cause of the black screen. I tried downloading an own explorer.exe and replace the explorer.exe in C:\Windows\. My computer it did not as he said I need the permission of the administrator, but of course, I am the Admin so I don't know what that's all.
  I tried to restart in Mode safe and that works very well, still, I can't replace the explorer.exe in the C:\Windows\ because I do not have the administrative authorization. I tried to change it in the Security tab of the properties, or impossible.
  I also tried to update the driver software graphics cards, checked the Shell in the registry value and made sure it's explorer.exe, used the difficulty of black of Pevx screen, used HitmanPro and Windows Malicious Software Removal Tool to scan and remove malware. I even did a scf/scannow, checked driver C a mistake (which took 3 hours!), let Windows Startup Repair to fix things, tried a system restore but failed. He says that the anti-virus (Sophos) prevented the restoration of the system, so I've temporarily disabled its access scanning on but still unable to restore to a previous (11/01). Program changes that recent such as listed in the system restore is Google + Auto BackUp who came when set Picasa to date there 3 days and a more recent version of Facebook video call I've ever used. I am now running a scan with Sophos, not too promising.
  So yes, I tried everything. I think that now, there are only three options:

  1 somehow replace the explorer.exe in C:\Windows\ with this new cool explorer.exe, which I downloaded, with the permission of the administrator
  2. try another restore of the system, but I'm sure that nothing will happen, already tried three times.
  3 reinstall Windows 7 Edition Home Premium. It will be a real pain.

  So please help me! I have courses of due on Monday and this portable do not let me what that be done. Thank you!!!

  Please ignore the other my long answer. The problem has now been resolved.

  After trying all kind of scans, drinking and sobbing, I came across TDSS Killer from Kaspersky, who managed to catch a 1 latest unique malicious software (that I was too stupid and really looked hopeless and remember the name of), it cures the problem after reboot. Now, the laptop works well like you wouldn't believe. I'm still confused but way too happy now to care. Thanks a lot for your help nevertheless!

• Problem: WDDM cannot support Aero in windows 7 home premium

  Hi, I have a Sony Vaio VPCEH in recent years, it has always functioned normally, but suddenly, at 800 x 600 resolution and has problems with aero (transparency and other effects), it's especially weird because it says that my graphics card may not support WDDM, even if it has been done since I bought this computer.

  Hello

  I understand that this graphics card is not longer supported Windows Device Driver Model and problems with Aero. I'll be happy to help you with that.

  This problem may occur because of compatibility issues with Aero and a video card in your computer running.

  I suggest you follow these methods and check if it helps.

  Method 1: run the Aero troubleshooter.

  If your computer has some problems running the Aero visual experience, which includes effects such as transparency, try to use the Aero Troubleshooter to fix the problem. It searches the current compatibility issues with running Aero, such as the color of your computer, theme, power settings and the video card in your computer.

  Refer to this article to open the Aero troubleshooter.

  http://Windows.Microsoft.com/en-us/Windows7/open-the-Aero-Troubleshooter

  Method 2: download the latest display driver on the manufacturer's Web site.

  To download the latest display driver, see this link.

  http://eSupport.Sony.com/us/p/select-System.pl?Director=driver

  Enter your model number and go further.

  Keep us informed of the status of the issue.

• I lost the function of transparency aero theme windows. How can I get him back?

  I tried to install windows 8.  My video card does not support it.  Because of this action, I lost transparency aero for windows themes.  I was not able to bring him back.

  Hi Rebecca,.

  Welcome to the Microsoft community!

  You may not use the Aero feature.

  There could be problems with graphics drivers.

  To work with the issue, I suggest you follow the steps:

  Method 1: Run the Aero Troubleshooter

   

  Visit the site:

  Open the Aero Troubleshooter

  http://Windows.Microsoft.com/en-in/Windows7/open-the-Aero-Troubleshooter

  Method 2: Update the graphics drivers

   

  Visit the site:

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

   

  I hope this helps. If you need assistance or if you have problems of Windows in the future, let us know and we would be happy to help you.

   

   

   

• Cannot run TIME on Windows 7

  I recently downloaded and installed ESXi 5.5 on a server dell for the assessment and I would start it management.  So, I downloaded the file of open management of vSphere and cannot run it.

  In any case, when I try to run it in VMware VMplayer, I get the following errors (click on retry after first error):

  

  Thus, all the instructions on how to use this file on Windows 7 would be great.

  Thank you

  Jon

  VSphere client was the correct solution - given the issues raised in other forums on the limits of the ESXi 5.5 client vShere - I loaded rather ESXi 5.1 on the server.  It does not always meet http: applications - but telnet confirmed the connection.  Then found Vsphere client download and installed and connected successfully.  Found 5.5 client, but decided not to risk the upgrade at this point.

• Cannot connect to Skype, Windows desktop application

  I can't connect to Skype Windows desktop App Win7, Skype 6.9.0.106. Username and password are good. I can log on with these on skype.com. Also I can log in using my address WP8 and hotmail.com. If I try to use my e-mail for loging hotmail.com address, this brings me to the name and password of user Skype page.

  Error: Unable to connect to Skype.

  6.9 Skype is an older version. All Skype versions prior to 6.14 are now disabled, which means that you can longer use the version 6.9. The version currently is 6.21. You must update your Skype.

  http://www.Skype.com/en/download-Skype/

• Smartphones from blackBerry Desktop Manager disabled?

  I just installed the Desktop Manager - followed all of the instructions in the installation wizard and restart the computer.  Now I opened the software and try to use the different functions, but they all say that they are disabled.  What is going on?  How can I get the software to actually WORK?

  You must configure the USB connection first. On the main screen, go to Options | Options of connection (or connection settings) and change the option for USB , and then click OK. Subsequently, all the options will be available

• Hello from blackBerry Smartphones and SOS: address book cannot be restored via BB Desktop Manager

  I am an absolute techtard who was simply trying to free up memory card space so I can transfer songs on my BB to my iTunes on my Mac and of course fixing a problem leads to another and it really starts to avalanche.

  Would be very grateful if anyone can help, here goes:

  Technical specification:

  Unlocked Pearl 8120, v4.5.0.55 (Platform 2.7.0.68) software, I don't know if this is relevant, but I'm using this in Hong Kong.

  How I messed up:

  1 tried to format media card, but he refuses to let me do if BB is hooked to the Mac or offshore. Also only went the battery.

  2. media checked card: total space is 970 MB and I only left 144KO. Weird because I have a few pictures and notes other than the email service and I just cleaned my cache of box and the browser of sms.

  3. delete unnecessary files: a few photos and memos remain, but they cannot take that much space I think

  4. search through forum discussions: decided to try cleaning the memory.

  5 save address book and address book - all (no idea what the difference is, but all the two doing anyway) on the BB Desktop Manager, saved memos upward as well.

  6. permit the garbage collection. Map of recorded media. Status quo.

  7 checked another forum thread that says I can, and that you should remove "Address book" of garbage collection service.

  8. panic and I tried to remove the 'address book' but it wasn't an option. Decided to clean all other components one by one in the hope to make more room, chose 'Search certificate' and he cleaned my complete address book.

  9 returned to BB Desktop Manager, Contact selected and clicked "restore." At both options i.e. full and partial restoration for the address book and address book - all.

  My directory is always empty.

  Tried to restore my memos too but BB Desktop Manager doesn't show me how do or no results under the help section of return. Mode techtard true, then check my memos - always there. Phew. These are emails and sms - are.

  Since I am a techtard, I didn't save my address book on my Mac (which would be the next big leap after I synced my BB with my Mac tonight).

  So it was back to discussions of the forum again and I saw one that said "uninstall the RIM DTM software, then reinstall it" of sdgardne. I do not have this stuck under his wire because I'm dead desperate for some attention, so I thought I would start a fresh appeal for help instead.

  My fear is that if I uninstall the software RIM DTM, then I'll lose all my addresses and memos. Isn't it based? Are there other solutions at all?

  I apologize for this long a spiel but I hope that the information could be useful to anyone who is kind enough to accumulate his brain to help out me here.

  Thanks heaps!

  Hi JSanders,

  Obstacles such as a switch office of personnel IT delayed my thanks for your advice... I didn't have any backup and has been quietly sad / happy for a few days for the sudden wipeout so miraculously reappeared all addresses.

  My outgoing HE said guy thanks to my Mac office and Outlook software - it was not very useful and does not specify because it was really flooded in his last days at work. New this GUY was looking to highlight a little so it took me a while to understand how save my address book (BB Gmail and Apple address book) and empty the memory card (multimedia card somehow reformatting tried-tested-guaranteed solution) escaped me.

  So everything is in working order, very much appreciate your advice and IrwinII too! Keep well!

• Windows7 Beta - SQL Developer causes themes Windows should be disabled

  If there is already a solution to this issue, I would like to hear about it.
  When I start SQL Developer on Windows7 x 64 Beta, I get a notice that:
  -----
  A program that you are using is not compatible with the Windows 7 themes. When this happens, some Visual elements are automatically disabled. When the program is no longer running, the Visual elements that have been disabled are enabled automatically.
  -----
  Windows 'themes' are the aero interface - I don't know if there is a problem with Vista or not (it has an interface aero also), I gave up on Vista almost immediately and was equipped with XP (without any problem) or Windows7 Beta (except rare glitches).
  Does anyone know if it is a Java or another parameter that responds to this problem?

  Go to \sqldeveloper\sqldeveloper\bin\sqldeveloper.conf and add the following line:
  AddVMOption - Dsun.java2d.noddraw = true

  I recommend that you do not change the default theme to something else like Windows, a lot of glitches graphics/exceptions

  Hope that helps.

• Cannot turn any featurs windows enable or disable in Vista Ultimate

  Somehow, the Tablet PC features have been enabled. I tried to remove them by using Add or remove windows features. After about half an hour, I get "an error has occurred. Not all features have been changed successfully. »

  To narrow down the problem, I tried to uninstall the other features of windows, such as Ultimate Extras. Once again, the same error message.

  I followed the advice in similar topics on components for re-registration, etc., but not luck. For the heck of it, I tried to delete a component on an another Vista PC in my house and got exactly the same result. I tried with and without, running Norton Antivirus - same result.

  This feature works at all? Aren't things like this test? It's * very * frustrating to always be spendign time for my operating system works only to do my current job! I wish that MS would realize that the OS should fade into the background, does not require that a lot of work and maintenance to do even the simplest of tasks!

  Hello

  How to enable Windows features turn on or off in Vista
  http://www.Vistax64.com/tutorials/67732-Windows-features.html

  -------------------------------------------------------

  More if necessary:

  How to activate the Narrator or disable in Vista
  http://www.Vistax64.com/tutorials/124575-Narrator-turn-off.html how do I turn on the Magnifier On or Off in Vista
  http://www.Vistax64.com/tutorials/125037-Magnifier-turn-off.html

  How do I change the keyboard to the screen on or off in Vista
  http://www.Vistax64.com/tutorials/72733-screen-keyboard.html

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  How to enable Windows features turn on or off in Vista
  http://www.Vistax64.com/tutorials/67732-Windows-features.html

  Disable ease of access button on the Vista login screen
  http://www.howtogeek.com/HOWTO/Windows-Vista/disable-ease-of-access-button-on-Vista-logon-screen/

  Ease of access Disabler - free - a small program that shows how disable the annoying ease of access button on the
  Vista login screen.
  http://www.Softpedia.com/get/tweak/system-tweak/ease-of-access-disabler.shtml

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Satellite A205-S4707 - cannot run camera on Windows 7

  Hi all!

  I have Toshiba Satellite a205 s4707, with Windows 7.

  It has the latest drivers Toshiba bios is after update, but I can't launch the camera. I tried everything I found on the internet but not worked for me.
  I tried to install a different software (not later), reinstall, update...

  I GIVE UP!

  Pls help someone! Show me that there is another way that it will run my camera!

  I have the driver installed, but in Device Manager, I have warning with "Chicony USB 2.0 Camera" - code 10.

  Help! PLS!

  Hey,.

  Error code 10 in Device Manager means usually only it s a driver problem...

  Which Toshiba page you downloaded the latest webcam driver?
  Using Windows 7 32-bit or 64-bit?

  In your case, I would like to delete the current version of the software of the webcam. Then restart your computer and install the latest version of it.

• Cannot run executable LabVIEW on desktop connection remote

  I have a couple of executable files, which are compiled using a LabVIEW 2011 development system, installed on a Windows XP computer.  These programs run fine when I double-click the icon while sitting at the computer.

  If I connect to the phone remotely from another Windows XP computer using Remote Desktop connection, I can use the remote computer normally except for the executables LabVIEW.

  When I double-click on one or the other, I get the error message displayed in the attached file. The part of the text of the report has no useful information, just two lines that seem to be field for e-mail names.

  What gives?

  Remote debugging is not a good substitute because it requires the executable file already be running.

  I was able to run two executables LabVIEW on desktop connection remote to a virtual machine of Windows 7 with 2 GB of RAM, running on a MacBookPro using Parallels Desktop.

  This confirms that the problem was insufficient for memory resources.