Cannot run executable LabVIEW on desktop connection remote

Similar Questions

• Desktop connection remotely from Windows 7 to windows XP Edition family

  I have a laptop running windows 7.  I'm trying to use the remote desktop connection to connect to my office.  The desk top is an Imac.  I have partitioned the hard drive on the Imac and am running windows xp home edition on the side of the windows partition.  It is this 'computer' and I try to access it via the desktop connection remotely from my laptop.  Thanks in advance,

  Rob

  The editions of Windows Home, if XP or Vista (and maybe even 7) may not be the side server to a remote desktop connection.  They do not contain the code necessary to accept the connection.

• I am not able to make a desktop connection remotely through Citrix

  I use Citrix to connect to my desktop of my computer at home.

  For the last two weeks, I had connection problems. Sometimes it works, but more often, it isn't. I get the error message says the following:

  "The specified remote computer could not be found. Check that you have typed the correct computer name or IP address, and then try to connect again. »

  I know I type the correct computer name because it is saved in my drop-down list. As far as I know, nothing on my desk, computer or computer at home has changed, but the problem is incompatible because sometimes it connects and sometimes is not.

  Basically, the steps I take are as follows:
  1. go on citrix. [company] .com
  2. enter my username and password and click Connect
  3. click on the desktop
  4. I get a pop up message saying I chose to open launch.ica coming http://citrix of Citrix ICA connection. [company] .com. What should Firefox do with this file?
  5. I choose to open with Citrix ICA Client Engine Win32 (default)
  6 then I get another pop up message saying this program has known compatibility issues and Citrix ICA is not compatible with this version of Windows. -C' is the same message that appears still, and it's always worked before.
  7. I click on the program
  8. it brings me to a generic research office running Microsoft Windows Server 2003 R2
  9. I then click on the Start Menu and choose desktop connection remote
  10. I select the name of the computer in my office (which is default) and click on connect

  That's when I get the error message.

  Anyone know what could be the problem and how can I find a solution?

  Hello

  Sorry for the Delisle in response.

  Given that the problem is related to the remote desktop connection, I suggest you contact the assisted support by using the following links:

  https://www.Citrix.com/support

  https://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?Forum=winserverTS

  I hope this helps.

• Left mouse in the desktop connection remote

  I am a user of left mouse.  I can't find a way to make it work in desktop connection remote.  Also, I would like to change the scrolling speed to match my regular desktop.

  Hello

  What type of computer are they connected remotely to?

  I suggest you follow the steps in the links.

  Change the settings of the mouse

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-mouse-settings

  It is possible that the computer is configured to not allow the user to change these settings based on group policy, I suggest you to follow the steps from the link and check.

  http://support.Microsoft.com/?kbid=325852

  Remote Desktop connection: frequently asked questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/Remote-Desktop-connection-frequently-asked-questions

• How to: use desktop connection remote with windows 7 to windows xp sp3

  Original title : is it possible to use the new remote desktop provided with windows 7 to windows xp sp3 I want to use the audio options

  Hello
  Please I want to know if there is any way to use the new options included in windows Remote Desktop connection 7 update connection Remote Desktop in windows xp sp3 or as the RTD of widows 7
  is there a way please just send me email to * address email is removed from the privacy *.

  Thanks in advance
  hamadakhalaf

  Hello

  You need third-party software to do this, I suggest you use your favorite search engine and check for the software that supports this option.

  Note: Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Also check out this link:
  http://social.technet.Microsoft.com/forums/en/w7itpronetworking/thread/a29f6207-4551-4AE1-941e-364919f50ad4

  It will be useful.

• Lack of desktop connection remote

  I am trying to establish a connection between my computer and my work computer. The "Remote Desktop connection" is missing from my Menu accessories. I tried to download the remote desktop connection software, but received an error message because apparently I have already. Anyone know where I can find it?

  Button start--> RUN--> type:

  mstsc

  --> Click OK.

• Login Creditials fail for desktop connection remotely using IP local. Connection via the hostname works very well in local intranet

  Something happened that broke my remote desktop connection.

  System-Win 7 Pro, with enabled Remote Desktop connections. (Static IP, router configured for port before any RDP to this system)

  For a few years now, I had access to this system via desktop remote with all the problems. I have connected by using the name of the computer on the local network and have also connected using the public IP address with a problem. Name of user and password for one, way worked fine.

  The other day there was a power outage or something, most of my systems was suddenly restarted or turned off, and my router had to be reset. Not sure if this is a coincidence of bad, but now the problem is that connection via the public IP address I get "your credentials did not work" when you try to connect. However, if I connect using the host name within the local chapter of the network of the same name to username/password work very well because they always have.

  That's happened. I'm going crazy trying to figure this out. My remote user cannot log on this system.  Help, please!

  Thank you for taking the time to answer, it's really appreciated. I could solve the problem. I don't know how, but if finally started working again. I have reset my network card and reset IP address static of the machine, that I tried to connect. And after some back and forth with that, all of a sudden he was still working. I was suspicious that my router was causing the trouble because the login failure was due to the fact that I've been routed to another computer, even if the rules of the if correct port forwarding. I just he blamed on the PC from Gremlins. I'll keep this info for future use. Some how all refreshed and began to work again properly.

• Desktop connection remotely from a windows Vista editions home basic - to windows 7

  I would like to know how to set up remote Desk Top connection. My friend who has really bad MS, I've been helping him years threw a Windows xp. Well she got a new computer windows 7Im don't know what windows 7, is-, but I have a windows 7 and a vista Home Basic, I've done everything I know to try to get it if I can get thrown on him and told him the things I've done. She sent me the invitation and the password but he always says not the right, then I tried to connect to it and it tells me that I have no connection threw the T gateway server. Could someone please tell me what to do to get this set up. I don't understand any of this. Thank you very much for everything you do for us. Silver

  You'll have to read through these links about operating system versions:

  http://Windows.Microsoft.com/en-us/Windows-Vista/connect-to-another-computer-using-Remote-Desktop-connection

  http://Windows.Microsoft.com/en-us/Windows7/Remote-Desktop-connection-frequently-asked-questions

  http://www.howtogeek.com/HOWTO/Windows-Vista/turn-on-remote-desktop-in-Windows-Vista/

  See you soon.

  Mick Murphy - Microsoft partner

• I can't start a desktop connection remote with my file server, but I can't get to my domain controller. Other computers on the network can initiate together.

  Using server 2003 as DC and server 2003 as a FS. Problem computer running windows 7 upgraded to vista professional. I can open a desktop session with the domain controller remotely, but I can't launch with the fs. Other computers on the domain have no problem with a server opening. I have access to shared folders on the MSDS via LAN and can ping the fs. Also can not use MySQL on the fs with this computer. FS cannot launch the Office with the computer problem remotely but can with others.

  Hi Gary,.

  Thanks for posting in the Microsoft Community.

  The question you posted would be better suited in the TechNet Forums; We recommend that you post your question in the TechNet Forums to get help:

  http://social.technet.Microsoft.com/forums/en-us/smallbusinessserver/threads

  If you need Windows guru, do not hesitate to post your questions and we will be happy to help you.

• Cannot run executables in Windows 8

  This issue has been resolved without doubt, but I couldn't find a thread in this forum to explain what is the solution for the problem below:

  We have developed a software pacakge in LabView 2012 SP1. The installation works fine in all versions of Windows from (XP 32 bit to 764 bit Pro), but after I installed the software in a new machine with 32-bit Windows 8 (PC used to have Win7 and used to run the software very well), I get the following message:

  "the vi is not executable for the full development" (several times in a single dialog box). "

  The clues how to solve this problem?

  Should I upgrade my LabView or is it easier to change two or three check boxes in the project settings? Also, I don't like how my installer will be as long it will run on the new machine.

  Thank you for your help and future prospects for your advice!

  I solved the root of the problem!

  Its about having an older versoin of MS .net Fx installed!

  (LV needs 2.0 and 3.5 that installs the software itself, but 8 victory comes only with enabled 4.5.)

  This page describes how do to turn on or off windows features:

  http://Windows.Microsoft.com/en-CA/Windows-8/NET-Framework-Windows-8

  Thank you all!

• How to use desktop connection remote on Vista Home Premium to Windows 7 computer.

  original title: HOW TO USE DRC ON VISTA HOME Premium TO ONE OTHER COMPUTER WITH WINDOWS 7

  I would like to know how to the DRC to connect to another computer with windows 7 for business. I have the ip address, the name of the computer, dns connections, physical, active dhcp, ipv4 addr and mask ip address-specific ipv4 subnet.

  How do you use the DRC?

  Help, please.

  Thank you.

  Hello

  This thread should give you all the information you need to know about the implementation of remote desktop

  http://TechNet.Microsoft.com/en-us/magazine/ff404238.aspx

• Desktop connection remote - software to control print works not properly

  Hello everyone, I'm having some difficulty in finding a solution to a very specific problem of remote desktop. For starters, the computer I can access as well as the laptop that I use to access is both running Windows 7 Pro. Also, I log in with an administrator account.

  When "check printer Designer" of in Quickbooks, Checksoft software (who initially installed the printer "check Designer") is supposed to automatically open and I would like to choose a design of check printing. I am able to do this very well when you go to the local computer, so I'm a bit puzzled. Printers/programs not have the ability to open other programs in the Office remotely?

  Hello

  The TechNet forum would be more appropriate for the problem you are experiencing. Check out the link and post your query:

  https://TechNet.Microsoft.com/en-us/WindowsServer/ee236407.aspx

• Cannot run Aero themes - windows desktop manager disabled

  I have a new laptop with Windows 7, windows Aero has never been run on this computer. When I run the troubleshooting Themes Aero, it said Windows Desktop Manager is turned off, when I try to turn it on it doesn't let me. I tried to restart it, and it does not work.

  I checked and my laptop should be able to run Aero views.

  My computer is a HP Elitebook 8460p

  4.0 GB Ram

  My Experence Windows index is 4.8

  I searched on the net and almost all tried, someone at - it ideas?

  Wallpaper,

  http://support.Microsoft.com/kb/2504610

  See also this,

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-desktop/Windows-7-Aero-disabled-how-can-i-enable-it-again/aa760f0f-EEC1-4a36-B212-c96130038d5c

  Enable Office Manager,

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-desktop/Aero-Troubleshooter-says-desktop-window-manager/82f1eb92-D371-407C-8118-bee158c3ccae

• The deleted Remote Desktop connection icon and want to know how to add it back

  Hello

  
  
  I have Windows XP Home Edition and a VPS service for Forex trading.  I 'accidentally' deleted my DESKTOP CONNECTION link remotely located in START / all PROGRAMS / ACCESSORIES / COMMUNICATIONS and I can't understand how he put on my desk, so I can connect to my VPS.  I'll have to type MSTSC. EXE in the box to RUN whenever I want to check my VPS and Forex, results instead of having an icon on my desktop to use.

  
  

  I tried to download SP3 again, hoping he would add the DESKTOP CONNECTION remote to its previous location in the menu START / all PROGRAMS / ACCESSORIES / COMMUNICATIONS.  Then I was hoping she was send to office option or create a shortcut?  But my computer won't let me download it SP3 again on the existing SP3 file, so I'm stuck.

  
  

  Someone has a very simple solution, how can I put back the link or shortcut DESKTOP CONNECTION remote on my desktop but it works correctly and also back to START / all PROGRAMS / ACCESSORIES / COMMUNICATIONS to connect on my VPS service Office?  I'm totally Luddite as you can tell, so I don't know if there is a major or minor problem, but I appreciate all the support!

  
  

  Thank you, Jim Pinkerton 

   

  Open search and search for mstsc.exe, where it is found right click and choose open folder, item selected right click and choose send to desktop, create a shortcut, it will be back on your desktop.

• about Remote Desktop connection

  What is remote desktop connection? How can we create remote desktop connection? How can we date or file in the network computer in the domain name server, we have created? If the connection is wired how can reconnect interrupted sudden on desktop connection remote connection? what the network discovery & network location? What is command prompt, how can it helps us to get information on the connection of the computer on the network?

  Hi Berhanu,

  Thanks for posting your query in Microsoft Community.

  Remote Desktop connection is a technology that allows you to sit in front of a computer (sometimes called the client computer) and connect to a remote computer (called the host computer) in a different location. For example, you can connect your computer to work from your home computer and have access to all of your programs, files, and network resources as if you were in front of your computer at work. You can leave programs running at work and then, when you get back, you can see the desktop of your computer work displayed on your computer at home, with the same programs running.

  I would refer to the article below for more helpful information and Setup.

  Remote Desktop connection: frequently asked questions

  Connect to another computer using Remote Desktop connection

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.