Cannot see the SanDisk SSD

I don't know that it is already in the forums several places!  Just bought an SSD over 240 GB.  Before connecting the drive, I made sure all drivers and BIOS on the Dell Latitude E6410 have been updated.  SSD placed more USB 3.0 drive housing and connected.  Saw NO disc in drive Windows manager (for example, my computer).  Downloaded and ran SanDisk dashboard and there it was!  Downloaded and executed the Apricorn software to clone drive free, and I got was pilot error.  Drive never copied passed 50%, and for each entry, there is an equal number of write errors!  So I stopped the process clone Apricorn and re-directed, with the same results.  Now, except for reports of dashboard from SanDisk that there is no attached SanDisk SSD!

What's wrong?  Where at - it go?  How can I get that back?

Download Macrium Reflect, he could see the SSD and clone SSD HARD drive.  Worked well.  The use as I write this.  Cannot explain what happened or why, but the problem is resolved.

Tags: SanDisk SSD

Similar Questions

  • cannot see the bengali fonts correctly in a Web page.

    Presenty using Windows 10 and Firefox 41.0b5. Cannot see the Bengali fonts correctly in any Web page, but the edge or the Internet Explorer can display Bengali fonts nicely.

    You can try to disable hardware acceleration in Firefox.

    • Tools > Options > advanced > General > Browsing: "use hardware acceleration when available.

    You will need to close and restart Firefox after enabling/disabling this setting.

    You can check if there is an update for your display driver graphic card and search for hardware acceleration of related issues.

  • When I install the new version of firefox browser dose being not fit on my screen. I cannot see the tabs or the ul bar and not even leave the firefox avecjoint

    When I install the new version of firefox browser dose being not fit on my screen. I cannot see the tabs or the bar ul and can leave not even firefox without using ctrl-alt-del and opening a master and have it at the end of program. Help, please.

    You may have a corrupted file xulstore.json .
    https://support.Mozilla.org/en-us/KB/changes-toolbars-and-window-sizes-are-not-saved

  • S75-b7218 Windows 8.1 satellite cannot see the bluetooth headset

    Satellite 8.1 Windows cannot see the Philips SHB5500 bluetooth headset.

    Driver: Intel (r) wireless Bluetooth (r)
    2014 08-12
    Version: 17.1.14342

    Help! Please, I beg you!

    Laptop certainly supports BT 4.0
    The question is: have you enabled the BT correctly in 8.1 parameters to win?

    Another question: have you tested the BT headset as part of another device?
    I mean, it is possible that the helmet is not working properly.

  • Whenever someone calls, I'm not able to take the call and cannot see the identification of the appellant as well. However, he gets noticed in the missed calls.

    I have an iphone 6. Whenever someone calls, I'm not able to take the call and cannot see the identification of the appellant as well. However, he gets noticed in the missed calls. Help, please.

    It is a problem of carrier - I would like to talk with my carrier

    Your signal may be weak or you can be in a dead zone - or there may be interference - those that can cause the call to go directly to voicemail

  • I can not eject a dvd from my drive iPhoto super-cannot see the drive open up Adobe Photo Elements and organizer and then apps get hung up "not responding" and cannot do anything - I've fixed dozens of times w msg success drive.  Help

    I can not eject a dvd from my drive iPhoto super-cannot see the drive open up Adobe Photo Elements and organizer and then apps get hung up "not responding" and cannot do anything - I've fixed dozens of times w msg success drive.  Help, please.  Thank you!

    Hello golden2,.

    I understand that you have a DVD picture in your SuperDrive drive, but it is not mount on the desktop and will not eject.

    Please, try the procedure described in this article using the disc is ejected.

    Get help with the SuperDrive slot on your Mac - Apple Support loading

    Do not eject discs or discs eject slowly

    1. If the drive ejects discs slowly or appears to have difficulty, insert and eject a disc several times. Check the disc to see if it has a label or other material stuck to the disc which increases the thickness. Remove the label if possible.
    2. If the disc does not eject, try pressing the eject on the keyboard button. Some older keyboards may use the F12 key to eject the disc.
    3. If the disc does not eject, try dragging the icon of the disk to the trash.
    4. If the disc will still not eject, try to hold down the mouse or trackpad button after you restart the computer. The Superdrive should attempt to eject the disc.
    5. If the disc still does not eject, reset the System Management Controller (SMC) and repeat steps 1 to 4.
    6. If the disc still does not eject, Contact Apple or an provider of services authorized Apple, or make an appointment with a Store Apple Store for further assistance.

    Take care.

  • WUSB600N cannot see the router

    I have a WUSB600N on my XP Pro machine. You can see each router in the whole neighborhood, but mine. My router is a Linksys WRT300N. Can anyone help? Thank you.

    T

    That did not work. I read elsewhere that on an XP box, the WUSB600n cannot see the WRT300N router.

  • My PhotoshopCC workspace is suddenly 'long' for my MAC screen.  I cannot see the bottom of the workspace and therefore cannot see the bottom of the vertical pictures.  How can I get this problem to what it has always been - set of the workspace editing on

    My PhotoshopCC workspace is suddenly 'long' for my MAC screen.  I cannot see the bottom of the workspace and therefore may not work on the bottom of the vertical photos.  How can I get that back to mount on display?

    Hi wassily.

    suggest you go menu window > workspace > reset Essentials

    and who needs to reset your workspace to the default.

    Kind regards

    Claes

  • I've updated the cs6 camera raw and now cannot see the metadata of the camera I used to see and can't find it in photoshop itself.

    I updated the cs6 camera raw and now cannot see the metadata of the camera in the first I used to and do not at all see in photoshop.  This can be corrected?

    What operating system do you use?

    If your using a mac operating system

    http://helpx.Adobe.com/bridge/KB/ACR-84-bridge-CS6-metadata.html

  • OIM 11 g resource request - approver cannot see the details of the request

    Hi all,

    I found a problem when you try to implement an authorization custom OIM 11 g. The approval workflow was working, but the approver cannot see the details of the user's request.
    The ID of the request, Beneficiery, Type query, request target are empty, and applicant show "Anonymous". If a connected as xelsysadm, this problem didn't happen.
    I use Self-Request resources to test the approval workflow.

    Please see the photo in this link: http://i1152.photobucket.com/albums/p488/Heri_Heriyanto/Jobs%20related/approvercannotviewrequestdetail-1.png

    What could be the problem? AM I missed permissions configuration and usage?


    Please advise...

    Thank you.

    Disable the composite. Cancel the deployment of your composite. Redeploy your composite, then turn back on.

    -Kevin

  • Wireless clients cannot 'see' the P1102w printer

    I have a printer HP LaserJet P1102w of professional set up and connected to the router wireless BT Voyager 2500V. If other computers are connected by a wire to the router, they can print and they can reach the printer over the network (tested using the ping command).

    However, if they are connected to the router as a wireless clients, they cannot find the printer in the network. If I use the ping command to test the connection, then the command indicates that the destination is unreachable. They can 'see' and connect to each other, but the printer seems inaccessible.

    Any suggestions? Thank you.

    Wireless clients have network cads Intel (R) Wireless WiFi Link 4965AGN (802.11n), the computer operating system is Windows Vista (32-bit and 64-bit). Firewall is turned off. Encryption WPA - PSK with TKIP data encriptación is used. MAC filtering is disabled.

    You have access to the configuration of the router?  Check if "AP Isolation" is enabled.   It is a feature of the router that isolates wired to the wireless clients.

    Of course, there is no point because your problem is the reverse, however, it may be interesting to play with.  Let's start there.

  • Homegroup problem: computer cannot see the computer B, but B can see A

    I have two computers.  A race 7-Home Premium 64-bit computer is connected to the network via a wireless-N.  7-Home Premium 32 bit computer B is wired.  Computer has created the homegoup.  Computer B can see computer A and can send files to A computer and retrieve them.  However computer cannot see at all computer B.

    I'm sharing files on both computers.  Not sure what the problem is.

    Hi Hunt72,

    Can you ping the computer from computer B?

    Can you start computer in Mode safe mode with networking and see if she can see computer B? If it still does not work, do the same with computer B.

    Do you know how to use netmon to capture the activities of the network?  If so, download it and run it by trying to send files between computers, take note of all connections rejected or denied.

    http://blogs.technet.com/Netmon/archive/2008/09/17/Network-Monitor-3-2-has-arrived.aspx

    Let us know if it works or not,
    Kevin
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Windows 7 cannot see the Windows XP computer to use the printer

    I have 3 computer at home 2 desktop computers and a laptop computer. I upgraded one of desktop and laptop for windows 7. The computer that has still XP cannot be upgraded, but has the printer connected to it. The desktop and laptop w / Windows 7 on them can see the XP computer on the network, but that the Bureau connects and can use the printer. On the laptop is can he sees, but cannot connect, I get this message

    "Error code: 0 x 80070035.
    The network path was not found.

    In troubleshooting, it says "windows cannot find a computer or a device", but you can clearly see in the network.

    Hi moorebounce,

    If you use Norton, McAfee, Trend Micro or Kaspersky I.S., make sure sharing files and printers turned in THEIR Firewall (or LAN enabled, depending on how their Exceptions are formulated in their firewall) or you can temporarily disable the firewall and check.
     
    Similar question was dscussed in two threads below. The threads below we have answered for Windows vista and Windows XP, but they are good for Windows 7 as well.

    Follow the suggestions posted by Nicolas GMicrosoft support, Moderator on Wednesday, August 5, 2009 02:01
    http://social.answers.Microsoft.com/forums/en-us/vistanetworking/thread/e30f3ab0-b6cd-4610-A579-92abcb520f4f
     
    James-Support EngineerMSFT, moderator Saturday, June 6, 2009 18:48
    http://social.answers.Microsoft.com/forums/en-us/vistanetworking/thread/7846fdb1-AE66-467e-887d-0a981e6668f6
     
     
    I hope this helps.

    Thank you, and in what concerns:
    Shekhar S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.
    If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • Windows 7 Professional 64-bit SP1 cannot see the workgroup features

    My computer: a laptop with OS Windows 7 Professional 64-bit SP1
    The network is a local small business network with 10 desktop computers running windows xp, windows 7 and windows vista. All other computers on the network running without problems, regardless of the operating system.

    I'm at the office and my laptop cannot see computers on the workgroup in windows Explorer. Network and sharing Center Center + map network shows that my laptop computer, router and internet and one other computer laptop using windows vista (weird). I use Norton 360 version 6.1.2.10 and Norton network mapping feature can see all computers in the workgroup.

    -J' tried to uninstall all windows antivirus firewall and disabling to no effect
    -I can ping all computers on the network and the router successfully.
    -All computers on the network have the same workgroup name
    -Network discovery is on
    -File and print sharing is ON
    -public folder sharing is turned on
    -password sharing is enabled
    -When you use anti virus I have configured the firewall to open all ports to and from the router and the server by IP
    -Although I can ping each computer on the network, I can't access shared folders or map network drives
    -My wireless Intel Centrino Advanced-N 6230 cards drivers are up-to-date
    -J' tried enabling netbios over TCP/IP without result
    -J' tried to connect to the network via ethernet cable and wireless to see if there was a difference, but there is no change
    -J' checked administrator-services and ensure that all the applicable services have been started and work properly
    If anyone has any other ideas please let me know I hate to admit it, but I encountered a problem, I can not solve it here.
    Thank you!
    -Shaun

    I suggest you research and post here:
    http://social.technet.Microsoft.com/search/en-us/?refinement=112&query=Windows%207%20workgroup

    b Eddie

  • Win 7 computer cannot see the computers on the network

    We have 3 computers on our network. A desktop computer running a laptop running Win 7 x 64, an office equipped with Win Vista and Win XP. All 3 are connected to the same workgroup and are properly connected to the internet. The two workstations can see and the laptop on the network and can move the files to the laptop, but the laptop cannot see other computers on the network. Whenever I try to open the network to move files to another computer, the icon just mouse sits and turns and the page remains blank. I thought that maybe he just needs time to see everything, left like that for hours without success. I went through all the troubleshooting steps in the win7 with nothing working Help Center. I don't understand why, if all the computers are on the same network, they can see me, but I don't see them. I am obviously connected properly so they can move the files to my computer. It may be unrelated, but I also can't update windows, keep getting error 80246008 when I try to run the update. Any suggestions on what I can do to fix this?

    Hello

    You can try the following steps and check whether the problem is resolved.

    Step 1:

    Networking of computers running different versions of Windows

     http://Windows.Microsoft.com/en-us/Windows7/networking-home-computers-running-different-versions-of-Windows

     

    Step 2: Now, you will need to follow the links provided below to check if you are able to connect to the home network.

    Home Sweet homegroup

    http://Windows.Microsoft.com/en-us/Windows7/help/home-sweet-HomeGroup-networking-the-easy-way

     

    Step 3: Now, you will need to visit the link that will help you solve network problems.

    Using the troubleshooter from network in Windows 7

    http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

    Now, you can follow the steps in the link below

    http://Windows.Microsoft.com/en-us/Windows7/why-can-t-I-join-a-HomeGroup

    Windows Update error 80246008

    http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-Update-error-80246008

    It will be useful.

Maybe you are looking for