cannot select a mapped drive on select the database window

Similar Questions

• Cannot select the drive (NAS) on Windows Media Center

  Original title: cannot select the drive (NAS)

  My HTPC uses a small SSD 30gig as an OS drive, with all the media stored on a 2 TB WD MyBook Live all connected via gigabit ethernet.  The NAS is mapped by Win7 Premium as Z: and is visible for Win 7 and all other programs, including iTunes and XBMC.  In Media Center settings-> TV-> check the possibility of the recorder are grayed out (+/-buttons) and the drive C: of SSD is the only option.  What can I do to get the WMC to see the SIN?  Is there another setting of mapping I should use?

  Also, as a side note, there is no option to change the quality of the recording at all.  Installer below.  If any other information is needed, let me know.

  ASRock m - itx E-350 APU/MB
  Kingston SSD now V series SSD 30gig
  Western Digital My Book Live 2 TB
  Cisco/Linksys E2000 Wireless N Router
  PCTV usb TV Tuner (HD capable) with on the HDTV antenna
  Win7 Premium

  Record TV directly to a network location is not supported.

  You can submit your comments here: http://mymfe.microsoft.com/Windows7/Feedback.aspx?formID=195

• Cannot select the device scanner, AIO F380, MacBook Pro

  Cannot select the device scanner, AIO F380, MacBook Pro

  Thank you, Sean. I found out what I needed to know to fix the DIF from a document from hp customer service. I was able to fix by restarting, it is to unplug the usb cable first from the printer, wait 5 seconds, plug the cable back in. Then I desconnected the cable from the computer, wait 5 seconds and plugged.

  Duh!

  Thanks for responding.

• Cannot select the Dictionary view user USER_TAB_COMMENT?

  Hello.
  
  I have this weird problem in 11.2.0.3
  
  I cannot select the view of the USER_TAB_COMMENT of a user dictionary, but others can.
  If I try to describe it, I get ORA-00942 and ORA-04043 messages.
  
  Here is my attempt. I create a comment on a table, try desc or select the view from the dictionary. Then connect with SYS and select the comment in the view "dba" to check if the comment was created:

  SQL> conn RODOLFO
  Introduzca la contraseña:
  Conectado.
  SQL> show user
  USER es "RODOLFO"
  SQL> comment on table DOCUMENTILLOS is 'This is a comment';
  
  Comentario creado.
  
  SQL> select table_name, comments from user_tab_comments;
  select table_name, comments from user_tab_comments
                                   *
  ERROR en línea 1:
  ORA-00942: la tabla o vista no existe
  
  SQL> desc user_tab_comments;
  ERROR:
  ORA-04043: el objeto "SYS"."DBA_TAB_COMMENTS" no existe
  
  
  SQL> desc all_tab_comments;
  ERROR:
  ORA-04043: el objeto "SYS"."DBA_TAB_COMMENTS" no existe
  
  
  SQL> conn / as sysdba
  Conectado.
  SQL> show user
  USER es "SYS"
  SQL> select owner, table_name, comments from dba_tab_comments
    2  where owner = 'RODOLFO' and table_name = 'DOCUMENTILLOS'
    3  ;
  
  OWNER                          TABLE_NAME
  ------------------------------ ------------------------------
  COMMENTS
  --------------------------------------------------------------------------------
  RODOLFO                       DOCUMENTILLOS
  This is a comment
  
  
  SQL>

  Other users, I don't have this problem

  SQL> conn MANOLO
  Introduzca la contraseña:
  Conectado.
  SQL> show user
  USER es "MANOLO"
  SQL> comment on table DOCS is 'This is a comment';
  
  Comentario creado.
  
  SQL> select table_name, comments from user_tab_comments where table_name = 'DOCS';
  
  TABLE_NAME
  ------------------------------
  COMMENTS
  --------------------------------------------------------------------------------
  DOCS
  This is a comment

  Clues why this is happening?
  
  Kind regards.

  elvegaa_esp wrote:
  What do you think?

  OK, the question is in the place where he is not pointing?

  Edit:
  Oh, it looks that it points to dba_tab_comments. Since your original post:

  desc user_tab_comments;
  ERROR:
  ORA-04043: el objeto "SYS"."DBA_TAB_COMMENTS" no existe
  

  Who do not have the right of Rodolfo.

  Thus, final to get rid of him.

  And a good thing that you do not 'go to your DBA"as suggested. It was just to choose the wrong solution to an unknown problem.

  Concerning
  Peter

  Published by: Peter on March 11, 2013 08:49

• I have a PC with windows 7 Home Premium installed. The PC is faulty and cannot be resolved. Can I reinstall the same Windows 7 to a new computer without additional cost?

  I have a PC with windows 7 Home Premium installed. The PC is faulty and cannot be resolved. Can I reinstall the same Windows 7 to a new computer without additional cost? If yes how can I do this? Some people reported issues license keys and it cannot be registered once in a PC.

  Thank you

  It is the major limitation of the OEM software that it can be installed on a PC. The COA label will confirm whether the license is OEM. A number of elements can be replaced in a PC in the way of repair, but only if exactly the same model of Council can this be exchanged.

  Even if you transfer the drive to the new PC would not authenticate because of the change of equipment, and it would be unlikely to to re-authenticate online.

  If the label is not OEM and you have a retail package, so it can be transferred.

• ORA-19838: cannot use this control file to open the database

  Dear all,

  While making RMAN cloning, we are facing problem,

  SQL > alter database open resetlogs;

  ALTER database open resetlogs

  *

  ERROR on line 1:

  ORA-19838: cannot use this control file to open the database

  Concerning

  Villi Kumar

  Dear all,

  While checking the database,

  Control the name of the database file is PROD

  In the instance, database name is TEST.

  So we took the PROD and edited control file trace file based on the TEST environment.

  Then run the script published in the TEST database trace file.

  Now we can open the database by using below command

  ALTER database open resetlogs;

  Concerning

  Villi Kumar

• Re-install C3180, cannot select the device in the Setup Wizard, the scanner is not found

  Try to reinstall HP Photosmart C3180 after that is a problem.  Uninstall done smoothly.  Re-install message said "successful."  In the HP Installation Wizard, click 'next' on the introduction page and move to select the page of the device.  There is nothing to select.  If I cancel, I can make copies and print a document.  However, when I select HP Scan Pro window opens successfully but I get an error message that says "sorry, scanner could not be initialized. (Scanner not found.)  My operating system is OS 10.6.8

  Hello

  The HP Scan Pro is not scheduled for OX X 10.6, so the installed software is not one that is suitable for your OS.

  Follow these steps to remove the printer driver and software:

• Import Aperture library to LR (10 of Windows).  Cannot select the library - treated as a folder!

  Hi all

  I'm trying to import my Aperture (about 15 images of k) on Windows 10 LR library.  I copied the library directly from the Finder to an external HD and from there to my hard drive of the PC.  When I browser in the library, it is considered to be a folder rather than a file.  This means that when I click on library.aplibrary to open, the button is 'Open' and that selecting this bore until the next level of the subfolder, rather that select the import library.

  Any suggestions?  Is there something I need to do to prepare it for export at the library on the Mac?

  Thanks in advance!

  Hi TrudeBordello,

  You would not be able to import the Aperture library on the Windows computer in Lightroom, because the Plugin is designed to read in the library on Mac.

  Please follow the document: Help. Import photos from iPhoto and Aperture (Mac OS)

  Then I suggest you to import the Lightroom library records.

  Kind regards

  Tanuj

• trying to downlad but 12 items cannot select the language

  I try to download 12 items but cannot select language.on page where you choose the version, it asks of prefference language but the language button does not work. I'm trying to move items to a new computer. (windows)

  Download Photoshop Elements products | 10, 11, 12, 13

  There are a group of languages in the upper left block and the 2 files in the right column to download for Windows in these languages, and a group of languages in the lower left for Mac and a single file to download in the Central column for all these languages.

  Guinot

• Cannot select the text to change

  I inherited a document and I can't change the text on a page. I tried the different layers but cannot select same text.

  I use CC 2014.0

  Brian

  Is the text on the master?

  It is on a locked layer?

  The text block is locked?

  Something is above the text frame?

• cannot select the disk to install the update of the Sierra (Macbook Pro 13 inch, late 2011)

  I downloaded the update of the Sierra and proceeded with the installation. However, I noticed that even if I could move the pointer autour, I couldn't make selections on tapping the trackpad. I managed to get past the first steps by using the 'tab' key (keyboard) to make selections and 'space' to make the confirmations. However, arriving at step 'select the disk where you want to install Mac OS', the 'Tab' and 'Space' technical has stopped working. Now I'm stuck here. Can someone tell me please how to go beyond this?

  Looks like it's a problem of trackpad? Or in any case a trackpad issue connected with installation of Sierra? I would take the MBP for a Genius Bar...

• Cannot select the photo on flickr

  When I press long to save a photo on flickr, rather than select the photo, it selects the first word of the text on the page (see http://www.flickr.com/photos/patrick-smith-photography/5497837887/sizes/o/). Here are the pictures that allow the download. Long pressure on Dolphin will record it. There is option click on the link to download it, but I hope in the future that Firefox shows the dialog box whenever something is downloaded, so I can name the file and choose the download location, instead of looking for the file, rename and move. But first there you select photo. I really don't like if it works in Dolphin. I use a lot of design & photo of the sites that use flash on the opening pages & have no mobile version (or app for iOS). So would really appreciate if Firefox could know that I'm trying to save a picture and no text and at some point let me manage the download at that time, rather more later in the file manager.

  Update your Firefox, press and hold on the image to obtain registration option

• Cannot select the junk e-mail tab in OUTLOOK 2011

  I use Outlook 2011 14.5.8 version on my MacBook Air. The system is 10.10.5 Yosemite.

  I want to set the junk e-mail filter. When I select the Tools menu, tab 'Spam Protection' is there, but gray, which is inaccessible.

  My junk mail is untenable.

  Any suggestions, anyone?

  I recommend you to visit the areas of support for Microsoft to find a solution.

• Cannot select the Panel of configuraiton of 'Security' with Down and Up the keys on the keyboard

  After you install BlackBerry10Simulator-Installer-BB10_0_06-384-Win-201207130120.exe on Windows XP (Vmware player 3.1.3), I can't select the Panel of configuraiton of 'Security' with Down and Up the keys on the keyboard, because "Screen" is the last item on the screen.

  It works with a mouse. Thank you.

  I use a computer thinkpad notebook and always use the navigation button (red button), so I now have to use a mouse.

• cannot select the paper of 4 x 6 size

  In the printing preferences, I can't select the paper of 4 x 6 size, not even using "custom" when you use Corel Photo Paint or MS Word.

  I can do so when printing through Windows Photo Viewer, only problem is it that I get lines across the image, about a po.

  Running Windows 7, printer is CP1518ni.

  We recommend that you try the following:

  Traditionally, remove the entries of 4 x 6, you have installed.

  Then, set the name of your new entry 4 6 4 6 x

  fixed 4 wide

  duration set to 6

  Press save

  Click ok

  We think that this should work for you