Cannot select Capex and Workforce Plan type when I create a new application

Similar Questions

• Actions and Variables are duplicated when I create the new model project

  My organization uses a standard model for our courses.  In this model, I added a few variables and advanced actions to enable to the learner to customize the course a bit and support our "test-out" option

  What I found however, is that when I create a new project of this model that all stocks advanced and variable are... reproduce some several times.

  And ideas on how to make this stop?

  Jay

  Unfortunately, this is a known issue.  I pointed out about it here:

  Problems of duplication in Adobe Captivate Cp7 Cp8 Templates | Infosemantics Pty Ltd

  As far as I know, the problem persists even in Captivate 9 If you create a template that has advanced Actions, and these actions are used by no slides in this model.  When you create a file CPTX of this model, Variables and advanced Actions are duplicated by about the same number of times that the advanced initial Action is used.

  You can test this by creating a simple project with two blades, a variable and a Standard Action that affects this variable with values. Define the event on slide enter on the second slide to run the Standard Action. Save the project as a model CPTL and then use this model to start another project CPTX file.  When you check the list of Variables and advanced Actions you will find that there is a duplicate of each.

• Error ORA-20001 when you create a new application

  Hello
  I am creating a new application of an existing table in the database and I get the following error. The application is created using the Wizard (type of database application, from scratch, report and our page)
  
  ORA-20001: unable to create modules. ORA-20001: create error pages. ORA-20001: unable to create form page. ORA-20001: Error Page = 2 item = 'P2_NON_ORACLE_EMPLOYEE_SPEAKER' id = '1975288532127294112' ORA-20001: error page 2 item = = "P2_NON_ORACLE_EMPLOYEE_SPEAKER" id = "1975288532127294112" a same name something like existing at the level of applications. ORA-0000: normal end successfully
  
  The table I created the app on is defined as follows:
  

  CREATE TABLE  "TABLE_1" 
     (    "ID" NUMBER, 
          "SESSION_EXTERNAL_PAPER" VARCHAR2(30), 
          "OWNER_CFP_SUBMITTER1_FULL_NA" VARCHAR2(255), 
          "OWNER_CFP_SUBMITTER1_COMPANY" VARCHAR2(255), 
          "STATUS" VARCHAR2(30), 
          "SESSION_ID" NUMBER, 
          "TITLE" VARCHAR2(255), 
          "ABSTRACT" VARCHAR2(4000), 
          "SESSION_TYPE" VARCHAR2(30), 
          "SESSION_CATEGORY" VARCHAR2(30), 
          "STREAM" VARCHAR2(30), 
          "PRIMARY_TRACK" VARCHAR2(255), 
          "OPTIONAL_TRACK" VARCHAR2(255), 
          "CROSS_STREAM_TRACK" VARCHAR2(30), 
          "SUPPORTING_VIDEO" VARCHAR2(4000), 
          "ATTENDEE_ROLE" VARCHAR2(255), 
          "TO_RATING" VARCHAR2(30), 
          "TO_COMMENTS" VARCHAR2(4000), 
          "COMMENTS" VARCHAR2(4000), 
          "ORACLE_PARTNERNETWORK" VARCHAR2(30), 
          "IS_YOUR_OPN_MEMBERSHIP_UNDER_A" VARCHAR2(255), 
          "ORACLE_PARTNER_TYPE" VARCHAR2(255), 
          "OPN_MEMBERSHIP_LEVEL" VARCHAR2(30), 
          "ORACLE_REGION_BASED" VARCHAR2(30), 
          "ORACLE_VALIDATED_INTEGRATION" VARCHAR2(30), 
          "HAS_YOUR_COMPANY_ACHIEVED_SPEC" VARCHAR2(4000), 
          "PLEASE_DESCRIBE_THE_VALUE_OF_O" VARCHAR2(4000), 
          "INCLUDE_CASE_STUDY" VARCHAR2(30), 
          "PROVIDE_NAME_OF_THE_CUSTOMER_F" VARCHAR2(255), 
          "PLEASE_PROVIDE_A_BRIEF_DESCRIP" VARCHAR2(4000), 
          "NON_ORACLE_EMPLOYEE_SPEAKER1_F" VARCHAR2(255), 
          "NON_ORACLE_EMPLOYEE_SPEAKER1_C" VARCHAR2(255), 
          "ORACLE_EMPLOYEE_SPEAKER1_FULL" VARCHAR2(255), 
          "ORACLE_EMPLOYEE_SPEAKER1_COMPA" VARCHAR2(255), 
          "NON_ORACLE_EMPLOYEE_SPEAKER2_F" VARCHAR2(255), 
          "NON_ORACLE_EMPLOYEE_SPEAKER2_C" VARCHAR2(255), 
          "ORACLE_EMPLOYEE_SPEAKER2_FULL" VARCHAR2(255), 
          "ORACLE_EMPLOYEE_SPEAKER2_COMPA" VARCHAR2(255), 
          "NON_ORACLE_EMPLOYEE_SPEAKER3_F" VARCHAR2(255), 
          "NON_ORACLE_EMPLOYEE_SPEAKER3_C" VARCHAR2(255), 
          "ORACLE_EMPLOYEE_SPEAKER3_FULL" VARCHAR2(255), 
          "ORACLE_EMPLOYEE_SPEAKER3_COMPA" VARCHAR2(255), 
          "NON_ORACLE_EMPLOYEE_SPEAKER4_F" VARCHAR2(255), 
          "NON_ORACLE_EMPLOYEE_SPEAKER4_C" VARCHAR2(255), 
          "ORACLE_EMPLOYEE_SPEAKER4_FULL" VARCHAR2(255), 
          "ORACLE_EMPLOYEE_SPEAKER4_COMPA" VARCHAR2(255), 
          "CREATED" DATE, 
          "CREATED_BY" VARCHAR2(50), 
          "LAST_UPDATE" DATE, 
          "LAST_UPDATED_BY" VARCHAR2(50), 
           CONSTRAINT "OOW_PAPER_PK" PRIMARY KEY ("ID") ENABLE
     ) ;

  I use APEX version 4.0.2.00.07
  
  Any idea what could be wrong and what can be done to solve the problem?
  
  See you soon,.
  Andy

  If you add a synonym for display to the database, the generator must see and allow you to use...

  Thank you

  Tony Miller
  Webster, TX

  Never argue with a fool. They do you drag down to their level, then beat you with experience.

  If you answer this question, please mark the thread as closed and give points where won...

• [JDev 12.1.3] The difference between the Type of Document "Facelets" and "JSP XML" when you create a new page?

  Hallo,

  that is the difference between choosing as a Type of Document "Facelets" and choosing "JSP XML" when you create a new page?

  Which is the best choiche and why? And is it possible to convert a page from one type to another?

  Thank you

  Federico

  Hi Federico

  JSPX both Faceletes are equal to the feature and after Jdev Release11gR2, both are supported in the ADF

  Facelets is deemed be better performance because it is more tight integrated with life cycle JSf and does not need to be compiled before running

  The future speaks Facelets (specification of JSF) and if start you a new project in development with JDeveloper 11 g R2 then we recommend you use Facelets for this reason

  See this good discussion -Diff b\w JSF and JSPX

  Thank you
  

• When I create a new email in Windows Mail and start typing to display my contacts list, not all contacts are displayed.

  in windows vista mail when I create a new message and the character of the 1st type (TO, CC) to address in my contacts a menu drop-down Show menu addresses related, but not all contacts show
  in my address book, I have 20 contacts (R) drop-down menu character departures do not show all contacts 20

  original title: windows vista mail

  Windows Mail only remembers 32 addresses. You can delete any part and start over. I normally just click on the button to and add addresses from the list.
   
  How to delete registration completion email in Windows Mail
  http://www.Winhelponline.com/articles/245/1/how-to-clear-the-email-auto-complete-entries-in-Windows-mail.html
   
  How to remove an address from the list of AutoComplete in Windows Mail
  http://email.about.com/od/windowsmailtips/Qt/et_del_autocomp.htm 

• I can't rename a new folder, when I create a new folder and then rename the folder, the folder was renamed "new folder."

  original title: renaming a folder

  Hello, I have a problem with windows vista, I can't rename a new folder, when I create a new folder and then rename the folder, the folder was renamed "new folder" can you help me? to solve this problem?

  Hello, I have a problem with windows vista, I can't rename a new folder, when I create a new folder and then rename the folder, the folder was renamed "new folder" can you help me? to solve this problem?

  Only time that happens, in my limited, knowledge is... If you use a 'illegal' name, such as ":" symbol. There are symbols, that you cannot use as part of a name. When this happens, you should get a warning indicating that the name is not allowed, something to that effect. Then he returns itself back to the new folder.
  Suggest you try again with conventional names. See if it works or not.

  t-4-2

• I have Photoshop CS6 extended. When I create a new layer, I get the following message. Could not complete the command because the selected area is empty. What I am doing wrong?

  I have Photoshop CS6 Extended. When I create a new layer, I get the following message. Could not complete the command because the selected area is empty.

  What I am doing wrong?

  Thanks for any help

  Bob.

  How do you create the new layer? Looks like you have a selection and use ctrl/cmd-J. If you have a choice and it is empty, you will get this error.

• All IT gurus out there who know Firefox... have lost the passwords saved when FF created a new profile and delete old files key3.dbf and logins.json profile.

  All IT gurus out there who know Firefox... have lost the passwords saved when FF created a new profile and delete old files key3.dbf and logins.json profile. Any ideas, anyone?

  So it's not a logins.json file?

  I see a signons3.txt file and a file signons.sqlite older, if you can try to see if you can import passwords stored in this file.

  You can force Firefox to re-import the passwords in the file signons.sqlite and regenerate the file logins.json with the following steps:

  • reset the signon.importedFromSqlite pref on the topic: config page by default via the context menu
  • Delete the logins.json file in the closed Firefox with Firefox profile folder

  When you restart Firefox, then you should have the pref signon.importedFromSqlite with the value set to true.
  You have passwords that are imported in the password manager, unless there were errors or signons.sqlite signons3.txt.

  You can open the topic: config page via the address bar.
  You can accept the warning and click on "I'll be careful" to continue.

  • http://KB.mozillazine.org/about:config

  You can use this button to go to the current Firefox profile folder:

  • Help > troubleshooting information > profile directory: see file (Linux: open the directory;) Mac: View in the Finder)
  • http://KB.mozillazine.org/Profile_folder_-_Firefox

• Windows mail. When sending a new email, I want to use the BCC field, that I can not select because it is not on the new Message. __How make CCB to come when I create a new message? This something __Is I can add tools please?

  Windows mail. When sending a new email, I want to use the BCC field, that I can not select because it is not on the new Message.
  How can I get the future BCC when I create a new message?
  Can I add tools please?

  Thanks for the reply Bruce Hagen. I am very grateful.

  Dave.

  In a new message window: view | All the headers. Check it out. Or, simply click on the button to easily add to your contacts list to: To, CC, or BCC.

  Bruce Hagen ~ MS - MVP [Mail]

• When I print a MS Word document my printer prints symbols but when I create a new document and try to print the new document of his impression.

  * Original title: printer print only symbols

  Hello world

  When I print a MS Word document my printer prints symbols but when I create a new document and try to print the new document of his impression. If my old document is damaged to corrupt so how do I fix it

  Old documents are probably corrupt. Check out these links:

  How to troubleshoot print failures in Word: https://support.microsoft.com/en-us/kb/826845

  How to troubleshoot printing problems in Word: https://support.microsoft.com/en-us/kb/826862

  Troubleshooting damaged in Word documents: https://support.microsoft.com/en-us/kb/918429

  And this announcement in Office/Word groups is a better idea. This may very well be a FAQ here.

• When you create a new message in Windows Mail only some contact appear just by typing the first few letters of their name

  Original title: Windows mail contact probrem

  When you create a new email, why some of my E-mail contacts appear with just by typing the first letters of his name while other contacts in my list do not appear?

  for example, if I send an email to alan, so when I type the letter 'a' all contacts beginning with 'a' used to appear and you can select whatever you want. This is not the case now, and I have checked the contacts that do not appear are saved the same way as those that appear.

  Any suggestions please

  WinMail stores AutoComplete addresses in the registry and it has a maximum of 29. Claire on some dead wood.
   
  How to delete registration completion email in Windows Mail
  http://www.Winhelponline.com/articles/245/1/how-to-clear-the-email-auto-complete-entries-in-Windows-mail.html
   
  How to remove an address from the list of AutoComplete in Windows Mail
  http://email.about.com/od/windowsmailtips/Qt/et_del_autocomp.htm 

• Send button is grayed out when I create a new message, but not when I answer.

  Send button and the spell check button is grayed out - as are the format and insert menus - when I create a new message. When I reply to a message, all the buttons and menus work. If I start to answer, but change the beneficiary, subject to line and insert a completely new message, I can send it.
  TBird worm 31.4.0 (installed recently. The question could have started with this installation, but I'm not sure.)
  Windows 7 Pro, Version 6.1, Service Pack 1
  Gmail configured according to the instructions from google.

  and the Send button becomes active when you actually address your mail (you can not send mail without address)

  The spell check button has no content to check, so it does not work until you start to type in the body of the mail.

  Even with the insertion, and menu format if you insertion point is not in the body of the email that they do not have a destination to work with.

• When I create a new user, the profile is not stored in my regedit.

  When I try to log on to my computer under a different name, I get the error saying profile services cannot load profile. When I created the new user, and then restarted, I checked the regedit and the profile is not listed there. Why is it not save the profile of the machine?

  Hello

  The question is on the domain environment and the post would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  TechNet Forum

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

   

  Hope this information helps.

• When I create a new file with 500px wide by long 500px it appears on my screen like a rectangle.

  When I create a new file with 500px wide by long 500px it appears on my screen like a rectangle. When I go to Image > Image size it still shows the 500 x 500 image and yet is clearly not a square. This also occurs if I try to create a circle, select the ellipse a tool by checking the box so he could make a perfect circle it appears as an oval.

  I have Photoshop CS6 on a macbook.

  Any help would be appreciated, I consider myself decently well informed in Photoshop and I looked in the settings, but I can't seem to understand the issue, happened for awhile now, it is not something unique stroke of luck.

  Thank you.

  Is your on-site pixel aspect ration? Set here the 500 x 500 pixels of image 2:1 format

  

• Why dreamweaver wants to replace my existing css file when you create a new page

  I created a Web site and I can not dreamweaver to accept my existing css file when I create a new page in the same Web site.  I click on file, create new page, I select page fluid and in the lower right, click on the link to an existing css file and click ok, but dreamweaver tells me so my css file does not exist and wants to replace my existing css file? What's happening?

  Thank you guys for this report we

  It's a little surprising that it is the way it is for a while now. Rather than create a fg with the attached css html, DW invites you to create a new css / replace the existing one. Why?

  The part confusing here is that the "css Attach leader"offers two options.

  1. fix like a normal CSS

  2. attach like a css FG

  If you check the preference to "Join as fluid grid CSS" (see attachment) you should not see this question.

  

  that is, unless you attach the css like a css FG, DW treats like any other css and waiting for you to bind one another css FG

  However, I'm too confused at first until I realized the difference. Hope this helps

  And thank you for bringing this to our notice

  .. Henin :)