Cannot set the supervisor on the Satellite L755 BIOS password

Similar Questions

• Question about the Satellite A200 bios password removal

  Hello.
  I own a Satellite A200 - 1 KB which has a password on startup and I would like to delete the password.
  I tried to get into the bios setup but I can't turn it off from there and I tried holding the ESC and hold left SHIFT to start but didn't work as well.

  If someone could help woul be great...

  Hello

  Unfortunately you won´t get here of secret advice on the deletion of bios passwords because the passwords were intended to protect a computer from unauthorized access. Thus, the password for the BIOS of your laptop is more often sunk that leads to the only solution:

  Contact an authorized service partner and let the button remove the password. But don't forget that you will be charged since the removal of the password of the BIOS is not covered by the warranty. Each manufacturer made this way, otherwise it would be easy to steal a machine, ask someone from a forum, and then use the stolen computer.

  You know what I mean? Here´s a link to find the closest available ASP in your country:

  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_whitepaper.jsp?service=EU&WHITEPAPER_ID=0 000000871

  Welcome and good luck

• Satellite M100: Cannot set the resolution 1368 x 768 on external LCD screen

  Satellite M100-179
  Graphics - ATI x 1400 card.
  Cannot set the resolution 1368 x 768 on connected usung Sub - D LCD TV Samsung 32R72
  There is no resolution 1368 x 768 in the available resolution list.

  The graphics card hardware support different screen resolutions, but if the driver doesn't contain this resolution of the screen so that you cannot choose it.
  I think so you re not able to choose this special resolution on the external display.

  In my opinion it has nothing to do with the graphics card or with the screen, but only with the graphics driver.

• Cannot set the time zone of Moscow winter + 3 hours.

  Cannot set the time zone of Moscow winter + 3 hours.
  Set the time zone Minsk 3 after the GPS clock moves forward 1 hour, timezone is set back from Moscow + 4.
  It is an error of your software when you are ready to address this issue.

  Automatic deactivation date & time(Settings>Date&Time...)

• Cannot set the restore point with the error "The Volume Shadow Copy service used by the system restore does not work."

  Cannot set the restore point with the error "The Volume Shadow Copy service used by the system restore does not work."  How can this be repaired?

  Hi rebick,.

  Try the troubleshooting steps presented by spirit X in this thread.

  Dena
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• BIOS HP Compaq Elite (i5-2400 CPU) 8280 cannot set the VT option

  BIOS HP Compaq Elite (i5-2400 CPU) 8280 cannot set the VT option

  found in the security system] [, thanks]

• ERROR - 1051414 - cannot set the role of group with shared services [30:1101:JNDI error] error.

  Hi all

  I tried provide access to filter the group in both SSP and thru Maxl command but still get the error below. Any experience of this problem? If Yes, please let me know how you solved this problem.

  
  

  ERROR - 1051414 - cannot set the role of group with shared services [30:1101:JNDI error] error.

  
  

  Thanks in advance!

  Krishna

  Read the support document that I posted the link, prior to changes for openldap ensure you that it is saved.

• I'm doing slideshows to music with an opening, I would switch to LR, but you cannot set the duration of each slide (in my case the score) based on listening to the music. (In the opening by clicking on the "stopwatch" and pressing enter at each change of

  I'm doing slideshows to music with an opening, I would switch to LR, but you cannot set the duration of each slide (in my case the score) based on listening to the music. (In the opening by clicking on the "stopwatch" and pressing enter at each change of image). Adobe staff question: can I expect to find this option in a future release?

  Hi Pcaubi,

  There is no such updates for the same from now.

  I suggest you to please put in a feature request to: Photoshop community customer family

  Kind regards

  Tanuj

• Cannot set the configured property "/ Initial.initialServices".

  Hi all

  I'm getting following error.

  05:21:52, 006 INFO [STDOUT] cannot set the configured property "/ Initial.initialServices" atg.nucleus.ConfigurationException: could not resolve the component/com/progiweb/fbconnect/pipeline/FacebookAuthStatusServlet

  05:21:52, 013 INFO [STDOUT] * error

  05:21:52, 064 INFO [STDOUT] cannot set the configured property "/ Initial.initialServices" atg.nucleus.ConfigurationException: could not resolve the component/com/progiweb/fbconnect/pipeline/FacebookProfileRequestServlet

  I checked the path of configuration of two components and the structure of the servlet is as below.

  src/com/progiweb/fbconnect/pipeline/FacebookAuthStatusServlet.java and src/com/progiweb/fbconnect/pipeline/FacebookProfileRequestServlet.java.java

  For properties files I created them under the path - config/atg/dynamo/servlet/dafpipeline / config/atg/dynamo/servlet/pipeline

  Inside of these I keep the files FacebookAuthStatusServlet.properties and FacebookProfileRequestServlet.properties
  

  The Initial.properties is as below - config/atg/dynamo/servlet/Initial.properties

  The content of Initial.properties is-

  & initialServices =.

  / ATG/Dynamo/servlet/dafpipeline/FacebookAuthStatusServlet,.

  / ATG/Dynamo/servlet/dafpipeline/FacebookProfileRequestServlet

  
  

  Should I have to keep the two pipelines-dafpipeline and pipeline or one of them?

  And my pipeline structure is correct or not?

  How to solve the error above?

  Please help on this!

  Kind regards

  Prateek

  You seem to be confusing core components and classes Java.  They are completely different.  The error message that you get "Unable to resolve component", says that the kernel is unable to find a file of specific properties anywhere in the directories named in your configpath trees.  To be precise, there is no file named /com/progiweb/fbconnect/pipeline/FacebookAuthStatusServlet.properties in your config directory.  If I read correctly this conversation, it is because the file with this name is a .java file, not a .properties file.  The two most likely causes of your problem are:

  1. you have a file of properties somewhere that mentions/com/progiweb/fbconnect/pipeline/FacebookAuthStatusServlet as the value of something else than $class.  $class is a special case whose value is sought by a Java ClassLoader in the classpath.  Values of the other properties are interpreted as references to the component, and looked up from core in the configpath.

  2. in the directory tree that contains the /com/progiweb/fbconnect/pipeline/FacebookAuthStatusServlet.properties isn't in the configpath.  ATG displays the complete configpath during startup.  If your directory is missing, you have may have specified correct information in the entrance of the ATG-Config-path in your module MANIFEST. MF file.

• ORA-12054: cannot set the ON COMMIT...

  Hello
  can someone please tell me what am I missing here?
  I can't create a materialized view, but I can't understand why is this?
  

  SQL> select * from v$version;
  
  BANNER
  ----------------------------------------------------------------
  Oracle9i Enterprise Edition Release 9.2.0.7.0 - 64bit Production
  PL/SQL Release 9.2.0.7.0 - Production
  CORE    9.2.0.7.0       Production
  TNS for HPUX: Version 9.2.0.7.0 - Production
  NLSRTL Version 9.2.0.7.0 - Production
  
  
  SQL> r
    1* select master,primary_key from user_mview_logs where MASTER='CIS_CASE' or master='CCR_ACTION_DEF'
  
  MASTER                         PRI
  ------------------------------ ---
  CCR_ACTION_DEF                 NO
  CIS_CASE                       NO
  
  
  
  SQL> r
    1  SELECT a.table_name, a.constraint_name, a.constraint_type, b.column_name
    2    FROM user_constraints a, user_cons_columns b
    3   WHERE a.constraint_name = b.constraint_name
    4*    AND a.table_name IN ('CIS_CASE', 'CCR_ACTION_CASES')
  
  TABLE_NAME                     CONSTRAINT_NAME                C COLUMN_NAME
  ------------------------------ ------------------------------ - ----------------
  CCR_ACTION_CASES               ID_PK                          P ID
  CIS_CASE                       PK_CIS_CASE                    P ID
  CIS_CASE                       SYS_C008496                    C ID
  
  
  
  SQL> CREATE MATERIALIZED VIEW mv
    2    REFRESH FAST ON COMMIT
    3  AS
    4  SELECT c.ID,
    5         CASE
    6            WHEN (c.script_id IS NULL OR c.queue_id IS NULL)
    7               THEN 1
    8            WHEN c.script_id IS NOT NULL AND c.queue_id IS NOT NULL
    9               THEN 2
   10         END TYPE,
   11         c.datum + a.due_time / 24 - a.alarm_due_time_1 / 24 alarm1,
   12         c.datum + a.due_time / 24 - a.alarm_due_time_2 / 24 alarm2,
   13         c.datum + a.due_time / 24 due_date
   14    FROM ccr_action_def a, cis_case c                                  --users u
   15   WHERE NVL (a.queue_id, NVL (c.queue_id, 0)) = NVL (c.queue_id, 0)
   16     AND NVL (a.type_id, NVL (c.case_code_type_id, 0)) =
   17                                                    NVL (c.case_code_type_id, 0)
   18     AND NVL (a.code_id,
   19              NVL (NVL (NVL (c.code_id_4, code_id_3), code_id_2), code_id_1)
   20             ) = NVL (NVL (NVL (c.code_id_4, code_id_3), code_id_2), code_id_1)
   21     AND (c.datum + a.due_time / 24 < SYSDATE)
   22     AND state IN (1, 2)
   23  UNION
   24  SELECT c.ID, 3 TYPE, a.due_date - a.alarm_due_time_1 / 24 alarm1,
   25         a.due_date - a.alarm_due_time_2 / 24 alarm2, a.due_date
   26    FROM ccr_action_cases a, cis_case c
   27   WHERE c.ID = a.cis_case_id
   28     AND (a.due_date < SYSDATE)
   29     AND state IN (1, 2);
    FROM ccr_action_cases a, cis_case c
         *
  ERROR at line 26:
  ORA-12054: cannot set the ON COMMIT refresh attribute for the materialized view

  Vili Dialis wrote:
  Rob, if you have any comments on my last query operation, I would be greatfull.

  Vili,

  You must start with a join view which does not contain any aggregate. Just a join of the ccr_action_def and cis_case. And don't forget to include the two table rowid to make quickly updatable. Then create a full blown newspaper on top of the join mv materialized view and create mv aggregation, selecting in the mv to join.

  Kind regards
  Rob.

  Published by: Rob van Wijk on 14-dec-2009 12:09

  And two boards that are not linked mv:

  (1) as has said, use a.id and c.id in a group by clause for the query itself work
  (2) do not use the string ' 14.12.09", use a date but you compare it with a date. So use: date "2009-12-14'

• How to set the user name and password when you use the class for SOCKS5 Proxy?

  Hi all
  
  I use the proxy class for SOCKS5, so need to set the user name and password, I can't find where I put the value. If the API support.
  
  Thanks in advance!

  Exactly how to repeat the question five times ater, we told you the answer would erase anything? A: this isn't. This irritates just the hell out of people. Irritating the hell of those who's trying to help you is not rational behavior either.

  I have no idea on the support of third-party for transmission by proxy via NIO.

• Satellite L505 - 14 d - Starcraft II - cannot set the resolution of 1366 x 768

  I recently bought this laptop, it has an ATI Mobility Radeon HD 5165 HyperMemory graphics card, however, when I installed the game Starcraft II, and tried to change my graphics settings, told me that my video (could say graph, or display card, I do not remember) card was not recognized, and that I might want to check this... I thought, well, that there is probably no problem, as long as everything works fine, but the problem is this; This isn't. I'm unable to set the resolution of 1366 x 768, which is the maximum resolution of the computer normally. The maximum resolution that I can put in this game is 1280 x 768...

  This starts to become quite annoying, not a HUGE issue by any means, but still, I would like to get this issue resolved. ;)

  My apologies if you have problems to understand what I mean here, that English isn't my mother tongue. Do not hesitate to ask me if you need clarification on anything whatsoever.

  Hello

  > not thought, well, surely this is no problem, as long as everything works fine, but the problem is this; This isn't. I'm unable to set the resolution of 1366 x 768, which is the maximum resolution of the computer normally. The maximum resolution that I can put in this game is 1280 x 768...

  Are you able to set the resolution of 1366 x 768 laptop s display settings?

  If Yes, then I guess that this has nothing to do with the laptop but with the game settings.
  Maybe the game is unable to use a higher resolution because of the pilot or the graphics card compatibility.

  I played a lot of games in the past on my laptop and to be honest game display settings have nothing to do with the general display resolution settings. My laptop resolution is 1400 x 1050, but the different games are available at 1024 x 768 due to the better performance

• Bluetooth is not disable the Satellite L755

  Hello

  I'm having a problem with the Bluetooth built into my laptop: the Bluetooth connection works fine, I can send and receive files without problem. However if I want to * turn off Bluetooth *,.
  I can't find the option to turn on/off.

  The laptop is a Toshiba * Satellite L755 - 1 c 1 *, running Windows 8.1 pro, 64-bit.
  Then, the ability to switch the Bluetooth power switch should be in PC configuration? PC and devices? Bluetooth, but this isn't, when I followed this path, the laptop automatically starts to scan for Bluetooth devices and I don't see the * usual on / off option * (here an image google image, just to make it clearer what I mean with usual we / off option http://i.stack.imgur.com/RYsM5.png).

  I know that option sometimes power can be in the same location of Wi - Fi on/off function PC options? Network? Airplane mode, but here I can see only the Wi - Fi power switch option.

  I also tried to press FN + f8, but this combination of keys disables only the Wi - Fi, no Bluetooth. Turn on same flight mode, stop my phone to send and receive files via bluetooth. I don't know why, but the airplane mode stops the connection Wi - Fi, but not the Bluetooth.

  I understand that the connection is only with the associated devices, but for batteries and for security/privacy reasons, I think it's very annoying to not be able to disable the Bluetooth.

  I never checked if there was this problem also when my laptop was running windows 7 or windows 8, so I don't know if the problem came with windows 8.1 or not.

  I don't know where I can find more information on Bluetooth of my phone which could help to solve this problem, should
  I checked in Device Manager? Bluetooth or Device Manager? Network cards? Bluetooth device?

  Thanks for the help,
  Marcello

  > However if I want to disable the Bluetooth.
  > I can't find the option to turn on/off.

  A question just to understand your problem:
  Screenshot image belongs to your system. Right?

  What system do you have exactly? Is - this win 8 or 8.1 Win
  I m asking this because there is a difference between winning 8 and 8.1 Win

  Win 8, you will find the power switch BT under:
  -> Laptop-> Wireless settings under wireless box

  8.1 win BT appears in:
  Settings PC-> PC and devices-> Bluetooth-> manage Bluetooth devices zone

  It is also 2nd way to disable BT in Win 8.1 in PC network settings:
  Settings-> network-> airplane mode laptop-> to the title of wireless devices, move the Bluetooth market / stop

  I m wondering about the Win 8.1 software and drivers that you have installed on this laptop.
  Usually it s necessary to install the driver of Toshiba system to win 8.1 as well as the filter for 8.1 of Atheros Bluetooth driver win without this software, BT will not work correctly

• Need help to retrieve the Satellite L755 - 16 c

  My laptop Toshiba Satellite L755 - 16 c, have system image to recover in original configuration, its does not work now, when you try to run it, a pop window shows that window cant restart in Windows recovery environment to complete the recovery operation. I tried with the DVD I created before also now not working is not with it, the same message coming from recovery.

  I tried to create a new recovery media recovery media creator by a pop window shows only "window looking TRMCLchr.exe cant find, which may changed or moved.

  Please help me solve the problem to return the laptop to original configuration

  Originally posted by Francis B Payyappiilly
  

  ... When you try to run it, a pop window shows this window can not restart in Windows recovery environment to complete the recovery operation. I tried with the DVD I created before also now not working is not with it, the same message coming from recovery.

  Hello

  This is all a bit confusing to me. If you have created a recovery media in the past, you should be able to reinstall the recovery image using this media.
  To be honest I don't understand exactly what is happening and what message is displayed on the screen.
  Can you please write what you can see on the screen? Message description full please.

  Start your laptop and enter the BIOS. By default the BIOS settings and restart your machine. Press F12 at first upward and choose the boot for your recovery media device and start the installation with ENTER.

  Please describe exactly what happens when you do this.

• Re: HDD on the Satellite L755 recovery facility

  I have laptop Toshiba Satellite L755. Accidentally I formatted the laptop without using HARD drive recovery option. My recovery partition went hard drive means there is no partition on drive now for HARD drive recovery.

  But yesterday when I searched in my laptop, I found a folder of HARD disk recovery consist of files of the HDD to format .swm and .crc and other files as a folder of boot manager .tools etc..
  Now, I want to install my HARD drive recovery files.

  How to install the files from my HARD drive? I tried to install the HARD drive recovery utility, but no compact version for my model is available.
  Help me pls...

  I have

  You can install the recovery image of HARD drive following the instructions
  http://APS2.toshiba-tro.de/KB0/HTD1303440001R02.htm
  This way only to s to install it.

  Did you create the recovery disk?