Cannot set u00p E1200/E1500
Hi, I recently bought E1500 renovated through Amazon, hoping to replace WRT310N which was not slowly due to age. However, when I tried to install the suite in all directions, he invites me with the message saying that the computer could not find the device. So I contacted the customer service and they determined that the unit was defective. Not wanting to wait another week to get a router, I went to Best Buy and bought nine e1200. However, the same problem persists. My wild guess is this modem router and comcast linksys are unable to communicate somehow. Does anyone have the same kind of problem? Still, my old WRT310N works just the wireless speed is about 10% of what it was.
Have you used the installation cd supplied with routers to implement? For your case, you may need to configure the router manually. Or you could try to establish the first internet connection between the computer, the router and the modem before running the cd to get the use of the software. Since you have a Comcast cable connection, what you can do: reset the router first by pressing the reset button on the router itself by using a paper clip or a PIN for 15 seconds, then the power it down for 10 seconds; Once the power led is solid, you can then start the manual installation; Access the router configuration page (to learn how, see this link: http://www6.nohold.net/Cisco2/ukp.aspx?vw=1&docid=3d655af76e21457fa8b71a0c3a2a0c9c_3676.xml&pid=80&r...). On the Configuration tab, click Mac address Clone. Turn it on and click Clone My PC MAC; Click on save settings. Go to the status tab and check if you have Internet IP address on the page (if you do, try to check your internet connection; if no, restart the router and the modem then again check the IP address). Once the internet works, you can then try to run the installation cd again. If she will always give you an error message, download the latest version of the software from the Web site: http://homesupport.cisco.com/en-us/support/routers/E1200 ; ( http://homesupport.cisco.com/en-us/support/routers/E1500) and use it to complete the configuration of your router.
Tags: Linksys Routers
Similar Questions
-
Satellite M100: Cannot set the resolution 1368 x 768 on external LCD screen
Satellite M100-179
Graphics - ATI x 1400 card.
Cannot set the resolution 1368 x 768 on connected usung Sub - D LCD TV Samsung 32R72
There is no resolution 1368 x 768 in the available resolution list.The graphics card hardware support different screen resolutions, but if the driver doesn't contain this resolution of the screen so that you cannot choose it.
I think so you re not able to choose this special resolution on the external display.In my opinion it has nothing to do with the graphics card or with the screen, but only with the graphics driver.
-
Tecra A4: Cannot set the resolution of 1280 x 800
Hi all.
I have a Tecra A4, and for the last 2 days I am trying set up the screen at native resolution of 1280 x 800, without sucssess.
I try a lot of things, like updating drivers, use the restoration of the system, the value 'stretch' in the BIOS, etc, but this resolution do not appear on the display settings (I use XP SP2). I've only 800 x 600 and 1024 x 768.
In any of these resolutions, a wide black border appear to the right of the screen. A small border appears on the bottom, too.
Please, how can I solve this problem? I don't want to use the Toshiba restore, some programs I use are very difficult to find and install.
Thank you.
You cannot set this resolution if this resolution of 1280 x 800 is not part of the display driver.
The graphics card driver contains all available resolutions and if one is missing, I mean not rated, it s not able to selectNothing to buddy
-
Satellite A30 - cannot set up the binding wireless modem
Hello
I have a satellite a30. I just upgraded to broadband and cannot configure the WiFi wizzard. the modem is working perfectly thanks to threads, but cannot set up wireless despite my efforts! Please can someone help?
see you soon
ClaireHello
What's the problem?
You are not able to see the thread or what?Are you sure of the laptop and built-in wireless network card?
Remember that the WiFi card is optional on the Satellite A30 and not all models includes the Wlan miniPCI card
Thanks for posting more details!PS; If the laptop supports a WLan card internal, you should check only that steps;
-Check if the WLan adapter is enabled on the laptop. Activate the switch on the side of the laptop and the FN + F8 key combination!
-Check if the windows own WLan configuration is marked
-Be sure that you use the right WLan encryption and whether encryption is supported by WLan modem (router) and wireless network card
-Check if the standard 802.11 WiFi, B or G is accompanied by WLan modem (router) and wireless network card
-Make sure that the router MAC filtering option has been disabled!As you can see all of these options are important to connect to the wireless LAN.
-
Just I have an open for this support ticket and I'm getting nowhere fast at the moment, while the community has been so useful until now I was wondering if someone here could help/advise.
-For the NASs x RN31400 2 I am owner and you have registered with you I am unable to setup e-mail alerts. I tried to use 3 e-mail addresses of 3 service providers: Yahoo, Hotmail/Outlook and also my own ISP TalkTalk email providers. No matter what settings I use for all 3 e-mail providers, I get the following error message: check the settings of the smtp server cannot send a code error message 5008010002 msmtp test e-mail alert on my 3 x NV + s very well using my Yahoo e-mail address work. On one of the RN31400s using Yahoo worked initially and the alert section would say that it has been configured correctly and I'd get emails to my 2 hotmail addresses, it was on 1 of my RN31400s on the other RN31400 the settings would save not and always say, there was a problem but I had managed through test messages. Now, no matter what settings I use, which email provider I use, etc. I can't e-mail job alerts! Please help because this is obviously a problem with the NASs and the software on devices, the version of the firmware on two is 6.4.1 Ive set up the addresses of 3 E-mail on an e-mail within my network client and all 3 work well, the 3 x NV + s do not have a problem using my Yahoo account to send alerts check my routers and firewalls there is no blocked traffic and I can't telnet to Server 3 Messaging without problems. Please advise/help, thanks.
And...
OK the update of the firmware did not work, I have one of the update firmware version 6.4.2 RN31400 and after 2 reboots, I am still unable to receive job alerts.
The I am using SMTP servers are:
Yahoo =
------------------------
Email provider: Custom
User: [email protected]
Password: xxxxxxx
SMTP server: smtp.mail.yahoo.com
SMTP port: I've tried 25, 465, and 587
From: [email protected]
Use TLS: I tried checked and uncheckedHotmail/Outlook.com =
------------------------
Email provider: Custom
User: [email protected]
Password: xxxxxxx
SMTP server: smtp - mail.outlook.com
SMTP port: I've tried 25, 465, and 587
From: [email protected]
Use TLS: I tried checked and uncheckedTalkTalk = it's the ISP I use!
------------------------
Email provider: Custom
User: xxxxxxx@TalkTalk,net
Password: xxxxxxx
SMTP server: smtp.talktalk.net
SMTP port: I've tried 25, 465, and 587
From: xxxxxxx@TalkTalk,net
Use TLS: I tried checked and uncheckedRef: browser, I used Firefox and Internet Explorer, not that it should make no difference whatsoever.
Ref: screen captures, don't need the parameters are listed above for the two RN31400.
Ref: parameters for the NV 3 x + an are as follows:
Yahoo =
------------------------
Email provider: Custom
User: [email protected]
Password: xxxxxxx
SMTP server: smtp.mail.yahoo.com
SMTP port: 465
From: [email protected]
Use TLS: Is checked andTest of the emails for the configuration of alerts on the NV + s are still working fine, DO NOT WORK for the RN314.
Please tell us what can be done to solve this problem, thank you.
And...
Full error message =
Unable to send a test message.
Unable to send a test message. Check the settings of the SMTP server. Code: 5008010002 error msmtp
DateTime: 05:02:09 04/02/2016
And...
Hello
Just right now I can read the KB article - which does not help somehow:
KB.Netgear.com/app/Answers/Detail/A_ID/23066There is nothing wrong with the configurations that I use.
All 3 servers SMTP and the above settings work very well on my NAS NV +.
All 3 servers SMTP and the above settings work fine on Outlook or Mozilla Thunderbird's within my network.
All servers SMTP 3 and address listed above work fine when I Telnet to them within my network.
First settings of Yahoo SMTP worked well on one of the RN314 and seemed saved and ok.
Also...
At the beginning of Yahoo SMTP settings worked well on one of the RN314 but not record or say that it has been configured correctly.
Then obviously there is something wrong with the SMTP service/server on these NAS RN314 2 bed.
I am not willing to allow you access as it will provide no benefit whatsoever.
For the course of 20 years, so it's nothing that can be done with you giving remote access with the exception of confirm you what I have already said previously, I have worked in it.
And...
So please advise what Netgear will do then or advise what other other confirming my settings allow remote access?
Your forums to research it seems that problems with mail like this are apparently quite common, so what has already been done to solve the problem?
Also the error code: Code: 5008010002 error msmtp
Why you are not this survey with your development teams who wrote the OS on the NAS working on what actually the error means?
There is nothing wrong with the configuration that it works very well on my 3 x NV + NAS, it works very well in e-mail clients, it works very well in Telnet, and it worked very briefly on the 2 x RN314 of for of Yahoo SMTP settings.
Eron - if you are unable to help further please add this problem to your support line... 3rd line?
Thank you.
And...
I also tried my account GMAIL apps less secure according to this thread the value:
GMAIL =
------------------------
Email provider: Custom
User: [email protected]
Password: xxxxxxx
SMTP server: smtp.gmail.com
SMTP port: I've tried 25, 465, and 587
From: [email protected]
Use TLS: I tried checked and uncheckedIf this does not work on the RN314 but it works very well on the NV + of via Telnet and in an email client (x 2)
Please escalate to your next level of support, thank you.
Right, I have fixed on one of the RN314 far...
I backed up all my data on this RN314 and did a factory default.
I have reproduced the RN314 settings manually then nonworking time for the reset RN314 except for identification data, i.e., name, etc.
Exactly as it was before... and now the RN314 in default works fine.
I am currently backing up the data on the RN314 now inactive to perform a Setup factory on that one and see if that solves the problem on this one here.
Then we can close this and I will refer to it with a new thread if I need if the second RN314 still has problems after the default settings.
-
Cannot set up eprint.
My printer was working with eprint very well until I got a new router. Since I can't not to use or setup eprint.
It is connected to the home network wireless and it works fine for printing documents.
I have reset the factory for Web services settings, but still no luck. Continue to flock to the top that I'm not connected to a network and wants a proxy
Can anyone help
Thank you
Hello
The valid IP address would start by 192.168 if the IP address starts with 169 or something else is not a valid IP address.
If the address of your router is 192.168.1.1 then the IP of the printer should be something like 192.168.X.X
OR
If your laptop is connected to multiple networks, this problem may occur. Please connect your laptop to only if the wireless network to which the printer is connected, try anything again.
Kind regards
Olilloyd
-
Cannot set the time zone of Moscow winter + 3 hours.
Cannot set the time zone of Moscow winter + 3 hours.
Set the time zone Minsk 3 after the GPS clock moves forward 1 hour, timezone is set back from Moscow + 4.
It is an error of your software when you are ready to address this issue.Automatic deactivation date & time(Settings>Date&Time...)
-
Original title: OEM Windows XP Home SP3 update XP Pro
Here is a compilation of the messages from another forum regarding
My problem:
---------------------------------------------------------------I'm trying to upgrade a Windows XP Home Sp3 OEM system to
Windows XP Pro. (There are a few Pro features
that are not available in the House I now need: (1) the files offline and
(2) an add-on available for free to Onenote 2007, Top2onenote, requires a Pro).
I don't want a clean install, but an upgrade. I bought a Windows XP Pro
Upgrade CD on Ebay that was Windows XP Pro
Gold (v2002). I'm sure that's true for the following reasons:It has been listed as an upgrade, but the CD is not labeled "Upgrade".
It seems very authentic with all Microsoft holography.
He came in the standard package of Windows XP (without box),
and it was sealed.
The name of volume for the CD is WXPFPP_EN. The Internet,.
It is the retail of Windows XP Pro RTM (gold)!Here are things I tried initially.
(1) I tried to upgrade to Pro from the purchased CD. It is immediately
has refused to upgrade indicating the upgrade OS (Pro) is older than the
installed OS (home)...(2) I read about "slipstreaming". "Slipstreaming" allows to integrate
a service pack with an earlier version of the operating system. I created a
upgrade XP Pro SP3 with Nlite slipstreamed CD image (and
Autostreamer later, but it made no difference) from the purchased CD
and a file containing SP3.After you burn the CD and start the upgrade
(Windows installation), the upgrade process
product through "information collection."
"Dynamic update" and "Preparation of Installation" with
no problems. My computer restarted and returned to
"Installation preparation". A progress bar called 'Progress '.
quickly filled to about 90% and the hanging system
at that time there for about 15 minutes.
Then, I got the following error message:Setup cannot set the required Windows XP configuration
information. This indicates an internal Setup error.This is where I am stuck. I had to leave the installation at this point.
My drive is starts raining and I had to restore a backup.(3) just for the heck of it, I formatted my hard drive and
reinstalled my original OEM XP Home SP3 OS (no clean up, no user file).
I immediately used my XP CD slipstreamed Pro to try one
upgrade to XP Pro and IT WORKED! I need to find out why the
properly clean XP Home OS upgraded to XP Pro but my pre-existing
(with the files users, drivers, etc..) XP Home OS does not level
successfully to XP Pro.
-------------------------------------------------------------Another post:
Yet once, today, I installed a new copy of OEM Windows XP Home Sp3.
I continue with installation of all the essential and the add-on
pilots (essentially all my original version). Then, I
set up a network connection and firewall. With this configuration,.
I ran the Pro XP slipstreamed SP3 CD. The upgrade to XP Pro
success (even if the upgrade not configured my graphics
card properly). I guess my current problem is either the registry,
the WINDOWS, some user file or parameter file.
---------------------------------------------------------------Another post:
I made a file and the backup of the folder C:\Windows folder
on my system that is pre-existing (OEM XP Home Sp3). I also did a
separate the backup the State of the 'system' on my pre-existing system.
These are added my full image backup of her pre-existing
system a month ago.I did a backup image of my system (minimum fees OEM XP Home
SP3 with all the original installed drivers over a network configured
connection and a firewall configured). This system will upgrade
XP Pro with XP Pro SP3 slipstreamed CD successfully.Experiment 1:
I've restored my minimum system. I then restored the C:/Windows folder
and the State of the pre-existing system backup system. A startup
has managed (with a minor irritant). I had to activate Windows.
Then, I tried upgrading the slipstreamed XP Pro processor. He stopped
at the same place during the upgrade and gave the same error as before:Setup cannot set the required configuration information Windows XP.
This indicates an internal Setup error.Experiment 2:
I've restored my minimum system. I then restored the system state only
the backup of the pre-existing system. After startup I was asked to
activate Windows, but answer Yes to the question would be to disconnect me
the system. I couldn't get connected to try the XP Pro upgrade.Experience 3:
I've restored my minimum system. I then restored only the C:/Windows
the backup of the pre-existing system folder. Once again, as in experiment 1,
the upgrade failed at the same place with the same error message.----------------------------------------------------------------
Before the experiment 3, I hoped that 3 experience would succeed so I
could conclude that I had a registry problem. I'm not sure now.
I don't know what to try next. Take the minimum system and reinstalling
my files of the user is not an option that my hard drive has over 200 GB of
programs! If I restore all files and folders of my pre-existing
I would still have backup to restore a system state the reliable (read the registry).
---------------------------------------------------------------------Sorry for the length! If anyone has any ideas I would appreciate your responses.
Thank you
Hello
This problem can occur if a piece of hardware that is installed on your computer is not compatible with Windows XP.
For more information, see this link:
Error message: Setup cannot set the required Windows XP Configuration information
Hope the helps of information.
-
Cannot set "Power Options."
Cannot set the 'power options' in the Power Options dialog box. There is no saved power scheme and boxes for standby, turn off hard drive, hibernation, etc. are all dark and I cannot choose one of them. Help me if you can.
Hello
· Did you do changes on the computer before the show?
Follow the steps in the Microsoft Knowledge Base article and check.
Power scheme options are unavailable on a Windows XP-based computer
http://support.Microsoft.com/kb/913622
You can also view the article mentioned below for more information:
Configure Windows XP power management
http://Windows.Microsoft.com/en-us/Windows-XP/help/Setup/configure-power-management
Let us know if that helps.
-
Original title: cannot set a power scheme in Power Options
Cannot set a power scheme. When I try to save the scheme, "Manager power strategy impossible to define the... two revision levels are incompatible."
How can I fix it?
Hi BernieHopkins,
1 have you properly previously defined the power scheme?
2 have you made any hardware changes or software on the computer before this problem?
3. What is the full error message that you receive?
If you receive the same error as mentioned in this link, you can follow this link & check if the problem persists.
Hope the helps of information.
Please post back and we do know. -
HP LaserJet Pro MFP M125-M126: cannot set the default printer
Hello
We have HP LaserJet Pro M125 - M126 PCLmS network MFP all in one printer, as the installation of all users was a success and was working fine the day of installation, after a day all users face the question cannot set default pritner, cannot print, all users are faced with question at a time ,
quick response is appreciated,
Hi @darshan9 ,
I see that you have problems affecting the default printer for users and you cannot print over the network.
I'd love to help you.Do you mean the configuration of individual computers with the printer on the network users, or a computer with multiple users?
You have administrative rights on the computer to make changes?
What is the name and the product number of your printer? How can I find my model number or product number?
Download and run the Print and Scan doctor. It will diagnose the problem and could solve it automatically. http://www.hp.com/go/tools > using HP diagnostic tools for printers under Windows HP.
I suggest you to check if you have another account user or an administrative account.
I also suggest to create a new user account and check if you are able to set the default printer.
Create a user account. Create a user account.
If you're still having problems, run the Fixit tool. Diagnose and automatically fix problems printing and printer.
What were the results when you ran the Print and Scan Doctor? (she print or scan, error messages)
If there is anything else I can help you, let me know.
Good day!
Thank you. -
Cannot set the restore point with the error "The Volume Shadow Copy service used by the system restore does not work." How can this be repaired?
Hi rebick,.
Try the troubleshooting steps presented by spirit X in this thread.
Dena
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
Cannot set default printer. Error code 0 x 0000709
Printer Deskjet HP3510 instaled on Hp laptop running windows 7. Cannot set default printer. Error code 0 x 0000709. Removing software and old computer
tgwright,
Thanks for the additional info. With the doctor print and scan does not locate a corrupted software/driver problems its time to turn to the operating system itself. Others who have had similar problems with the same error indicate a corrupted registry key, the origin of the problem:
http://goo.GL/t94JGBeware these solutions indicate the change of information in registry (very dangerous if you don't know what you're doing). If you are not familiar with the registry or have never been here before that I would suggest seeking additional support in some way (local / Microsoft IT / PC repair service, etc.).
Good luck!
-
BIOS HP Compaq Elite (i5-2400 CPU) 8280 cannot set the VT option
BIOS HP Compaq Elite (i5-2400 CPU) 8280 cannot set the VT option
found in the security system] [, thanks]
-
Cannot set a default website in Google Chrome
Hello
Cannot set the default Web site in Google Chrome. IE has been simply to go to the top of the page of google/right click / check the menu/internet options / and choose URL [google.com] to start by default.
It is impossible for me to understand or to find the way to do the same for Google Chrome. I just want to open google.com when I click on the Google Chrome icon. Please notify.
Thank you
Joe
Hello
Thanks for posting your query in Microsoft Community.
However, since the issue is specific to Google Chrome, I will ask post you your query in Google Chrome support for the best support possible.
Do not hesitate to write to us in case you have any problems/concerns while working on your computer, we will be happy to help you.
Maybe you are looking for
-
Firefox is my downfall of the MacBook Air?
Twice in just twenty-four hours, the screen of my MacBook Air is suddenly flashed and then again dark. So, I have to restart the computer to make it back. Both times it happened I was just using Firefox, quietly reading online news stories. Since the
-
It is a general question about how best to work with many open web sites. Sometimes I open 10-20 at the same time. Sometimes I will open a second or a third copy of the browser and have several tabs there too.
-
I just bought a HS SX50 and a camera case. I found that the case of the camera has enough room in his pockets to store the battery charger provided Cannon (CB - 2LC) or an extra battery, but not both at the same time unless I install the battery in t
-
Help - Audio Service is NOT running - Windows Vista
Hello I checked several websites & forums solution to my problem before asking the question here. A week Audio feedback from my computer started to give me problems. At first the audio suddenly stops during normal operation & would not return unless
-
Windows 8 - icons of the CS6 Office showing as white icons with the green arrow
After I loaded standard CS6 64-bit on my DELL XPS 8, the Office file windows icons appear as an icon of white box with a green arrow instead of icons Adobe. All other icons appear correctly. I have Illustrator CS5 on my hard drive and before I loaded