Cannot share the internet connection on the network with sprint card
Hi all
I'm stumped on this one. I'm working on my network of fathers, and he lives in a rural area. Unfourantely, there are not a lot of internet service here. It uses a printed card that connect locally to a windos vista home pc. From there on, the connection is shared and that the pc is connected to a linksys router. The router, then hosts a wireless network and hard line connections. About three weeks ago, the Internet stopped working except the computer, map of sprint is hung directly. I tried the following options below to solve the problem.
1. I can plug the card sprint to any computer and it works.
2. I replaced the network adapter on the host computer
3. I have tried the card sprint on other computers and tried to share from there. Same result
4. replace the router
5 opportunity anotehr card Sprint which has been known to work
6. replace the network cable between pc and router
7. I tried removing the router from the equation and ran a network of host pc card form for directly to another computer
8. the host and also renovated of other computers reformated
9. do you have an ipconfig/release and renew
10 tried sharing all NICs on the host PC
When sharing the connection, I can see all the computers on the network. They arise, there is simply not an internet connection.
The only mistake that I seem to get is not able to find the DNS. I put everything on dhcp.
Any ideas that anyone can come would be most appreciated. Thank you
Hello
Step 01:
I suggest you follow the same steps as expected here to set up the ICS (Internet Connection Sharing) host computer:
http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-shared-Internet-connection-using-ICS-Internet-connection-sharing
Step 02:
I also suggest you to follow the link and check.
For more information, please follow the link.
http://Windows.Microsoft.com/en-us/Windows-Vista/using-ICS-Internet-connection-sharing
Tags: Windows
Similar Questions
-
Unable to connect because of firewall or something, not true of course
When I go to my list of wireless networks, or try to connect to a network it tells me that windows cannot configure the network and if I wanted windows to set up the connection, I need to start the firewall/ICS internet service (ICS) service and then he asks me if I want to start now then I say yes , but then it just tells me that it can't because the assoiciated service is not running, can anyone help please.Hello
I suggest you to follow the steps in troubleshooting this article and check if it helps:
Error message when you try to run the Network Setup Wizard update for Windows XP Service Pack 2, Service Pack 3, or Windows XP Tablet PC 2005 Edition wireless
http://support.Microsoft.com/kb/871122
Also read these articles and check:
In Windows network connection issues
http://support.Microsoft.com/kb/313242
How to troubleshoot wireless network connections in Windows XP Service Pack 2
-
Hello.
With Windows 7, I want to share the network connection Wi - Fi with Bluetooth through PAN (Personal Area Network).
When there are several connections in addition to Bluetooth after opening "Share" tab, I see these connections in the "Home Networking connection" list, but there is no Bluetooth. Then, when there is no connection in addition to Bluetooth which I can share with, there is no tab "share."
Equipment: laptop Samsung NB30:
- Broadcom BCM2070 Bluetooth 3.0 + HS USB Device with the driver PAN ('Bluetooth device (Personal Area Network)") provided by Samsung: Microsoft, version 6.1.7600.16385, 21.06.2006
As I assume there should be means to somehow add "Bluetooth Network Connection" to a list of connections that can be internet shared with.
Also, when I tried to fix this problem manually, other questions are raised:
- There is really no Thoubleshooting guide for Internet connection sharing in Windows 7? I see this document on the site "Microsoft Support" for Windows 98SE, Windows XP - but not Vista and 7.
- When I'm stuck to the administration of the system to the GUI, there is good decision to guarantee a target with the CLI. After searching a command line installation Internet connection sharing, I see no guides for this - only something likehttp://forums.devshed.com/windows-help-34/enabling-ics-under-command-line-89499.html . Is there really no way to set up ICS by command line and I'm forced to use complex GUIs?
So, please help me solve problem BT PAN ICS. But if you reply to other questions, it will also be interesting to read.
Hi LeoniusLeonius,
Here are a few articles using Windows Internet connection sharing (ICS) you can do refers to.
Using ICS (Internet Connection Sharing)
http://Windows.Microsoft.com/en-us/Windows7/using-ICS-Internet-connection-sharing
Set up a shared Internet connection using ICS (Internet Connection Sharing)
Change the settings for ICS (Internet Connection Sharing) Internet
Sharing an Internet connection between multiple computers
http://Windows.Microsoft.com/en-us/Windows7/sharing-one-Internet-connection-among-several-computers
Change which computer on your network connects to the Internet
See if one of the articles will help you in fixing the issue.
Any sharing via command line for internet connection, unfortunately there is no command available to do.
Hope that answers your query.
Kind regards
Shinmila H - Microsoft Support
Visit our Microsoft answers feedback Forum and let us know what you think.
-
I have Windows 8 on my laptop... and this laptop is connected to the internet via an USB-powered Wifi device, it takes an user name and password to connect to the internet otherwise it says limited connectivity and will not connect to internet... now, I have an old PC with Windows XP on it... the PC and laptop have built in LAN cards... I also have a cable that fits in the LAN cards... when I connect the two computers, LAN cards and Windows flashlights, they also show that they are connected to a local network... However, I can't use this Wifi connection on my laptop to share an internet connection with PC WIndows XP... I tried to fill, manually configure IP addresses, sharing connections, all with no luck... of many websites is a lot of confusion...: /... Please someone guide me step by step how can I make my XP PC to connect to the internet using the connection of the laptop...
Hello Ashan,
Thanks for the reply.
You can try to follow the following suggestions to solve the problem.
First, try to reset Internet Explorer and see if that helps.
Reset Internet Explorer
http://support.Microsoft.com/kb/923737
Note: The Reset Internet Explorer Settings feature might reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings. Reset Internet Explorer is not reversible, and all the previous settings are lost after reset.
Additional information:
We can also refer to the computer or the device manufacturer's Web site and try to update the latest version of the network adapter drivers.
(Also works for Windows 8)
Updated a hardware driver that is not working properly
To connect to the Internet
http://Windows.Microsoft.com/en-us/Windows/Connect-Internet#1TC=Windows-8
I hope this helps. Otherwise, feel free to write us again and we will be happy to help you.
Thank you
-
Cannot start the network connection: invalid access to memory location
Hi team,
Windows 2003 SP2 cannot start the network connection. Error connections network service terminated with the following error: invalid access to memory location. Can you help me on this issue?
Thank you
Sangaré
Hello
Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the Windows Server 2003 Forum. You can follow the link to your question:
http://social.technet.Microsoft.com/forums/en-us/winserverPN/threads
-
XP host and client windows 7 on ad - hoc network...Dear friends, I have set up an ad hoc network between two laptops. The host is running on xp sp3 and the client is running windows 7.Now the problem is that if I enable security on the network, the client windows 7 cannot recognize the network at all.If I turn off security on the network ad-hoc, everything works fine and I can share files and access the internet on client... Please help
Ok
Now, I'm pretty sure that I understand your game up. Well done to get the internet connection, sharing of work (not a simple process) but without encryption.
I am sure that the problem lies in the Windows 7 laptop (laptop 2). When you switch cell 1 to WEP, you must also pass portable 2 to WEP and provide the WEP key you have configured with laptop 1.
It's getting late here now, but I'll try to answer tomorrow after I have test it on my two laptops to Windows 7. In the meantime maybe I can point you in the right direction...
- Right-click the the small icon at the bottom right of your screen on laptop network 2 and then click on Open Network and Sharing Center
- In network and sharing Center, click on manage networks wireless (nearby at the top left)
- Click Add, and follow the wizard to create an ad hoc network, selecting WEP and providing the encryption key you configured on the notebook 1
- Save the network so that you do not have to repeat this procedure.
Otherwise, when you get to manage wireless networks, if your ad hoc network is already listed...
- Right-click in your ad hoc network, and then click Properties
- Click the Security tab
- Change it to WEP and provide the encryption key
- Click OK
Good luck, I will pick up this new after my drowsiness.
Tricky
-
Cannot access the network ERR_NETWORK_ACCESS_DENIED
I have Windows 7. Nothing works, I tried chrome (which will not even load) and Firefox (it has been a constant problem with gmail for well over a year).
Cannot access the networkERR_NETWORK_ACCESS_DENIEDGoogle Chrome has access to the network.Maybe it's because your firewall or antivirus software wrongly think that Google Chrome is an intruder on your computer and it blocks to connect to Internet.
Chrome allow access to the network in your firewall or anti-virus settings.If it is already listed as a program allowed to access the network, try to remove from the list and Add again.I tried the above, but can't seem to solve the problem. Thank you.
Hello Paul,
Thanks for posting your question on the Microsoft Community.
I would like to know some information about the problem so that we can help you better.
The same problem occurs when you use Internet explorer?
Thank you for details on the question and your efforts to resolve.
If the problem also occurs when you use Internet explorer, I suggest you use the steps in this article and check if it helps.
Reference:
Can't access some Web sites in Internet Explorer
https://support.Microsoft.com/en-us/KB/967897Note: The feature reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings. Reset Internet Explorer is not reversible, and all the previous settings are lost after reset.
Also see this article:
Understanding Windows Firewall settings
http://Windows.Microsoft.com/en-us/Windows/understanding-firewall-settings#1TC=Windows-7Note: Firewall and Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not turn off your antivirus software and firewalls. If you need to disable temporarily to install other software, you should reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software and firewall are disabled, your computer is vulnerable to attacks.
To get help on Google chrome, I suggest you post your question on Google chrome forums.
http://productforums.Google.com/d/Forum/chromeI hope this information helps.
Please let us know if you need more help.
Thank you
-
PIX501 customer VPN - cannot access inside the network with VPN Session
What follows is based on the config on the attached link:
PIX Ver 6.2 (3) - VPN Client 3.3.6(A) - Windows XP Client PC
We can establish the VPN to the PIX501 session, but we cannot access the network private behind the pix.
Here is the config - I can't determine why it does not work, we are desperate to get there as soon as POSSIBLE!
We have the same problem with the customer 4.0.3(c)
Thanks in advance for any help!
=======================================
AKCPIX00 # sh run
: Saved
:
6.2 (3) version PIX
ethernet0 nameif outside security0
nameif ethernet1 inside the security100
hostname AKCPIX00
domain.com domain name
fixup protocol ftp 21
fixup protocol http 80
fixup protocol h323 h225 1720
fixup protocol h323 ras 1718-1719
fixup protocol they 389
fixup protocol rsh 514
fixup protocol rtsp 554
fixup protocol smtp 25
fixup protocol sqlnet 1521
fixup protocol sip 5060
fixup protocol 2000 skinny
fixup protocol sip udp 5060
names of
access-list 101 permit ip 192.168.1.0 255.255.255.0 10.0.0.0 255.255.255.0
pager lines 24
interface ethernet0 10baset
interface ethernet1 10full
Outside 1500 MTU
Within 1500 MTU
external IP address #. #. #. # 255.255.240.0
IP address inside 192.168.1.5 255.255.255.0
alarm action IP verification of information
alarm action attack IP audit
IP local pool akcpool 10.0.0.1 - 10.0.0.10
history of PDM activate
ARP timeout 14400
Global 1 interface (outside)
(Inside) NAT 0-list of access 101
NAT (inside) 1 0.0.0.0 0.0.0.0 0 0
Route outside 0.0.0.0 0.0.0.0 #. #. #. # 1
Timeout xlate 03:00
Timeout conn 01:00 half-closed 0: 10:00 udp 0:02:00 CPP 0: h323 from 10:00 0:05:00 sip 0:30:00 sip_media 0:02:00
Timeout, uauth 0:05:00 absolute
GANYMEDE + Protocol Ganymede + AAA-server
RADIUS Protocol RADIUS AAA server
AAA-server local LOCAL Protocol
the ssh LOCAL console AAA authentication
No snmp server location
No snmp Server contact
SNMP-Server Community public
No trap to activate snmp Server
enable floodguard
Permitted connection ipsec sysopt
No sysopt route dnat
Crypto ipsec transform-set esp - esp-md5-hmac RIGHT
Crypto-map dynamic dynmap 10 transform-set RIGHT
map mymap 10-isakmp ipsec crypto dynamic dynmap
mymap outside crypto map interface
ISAKMP allows outside
part of pre authentication ISAKMP policy 10
encryption of ISAKMP policy 10
ISAKMP policy 10 md5 hash
10 2 ISAKMP policy group
ISAKMP life duration strategy 10 86400
vpngroup address akcpool pool akcgroup
vpngroup dns 192.168.1.10 Server akcgroup
vpngroup akcgroup by default-domain domain.com
vpngroup split tunnel 101 akcgroup
vpngroup idle 1800 akcgroup-time
vpngroup password akcgroup *.
vpngroup idle 1800 akc-time
Telnet timeout 5
SSH #. #. #. # 255.255.255.255 outside
SSH timeout 15
dhcpd address 192.168.1.100 - 192.168.1.130 inside
dhcpd dns 192.168.1.10
dhcpd lease 3600
dhcpd ping_timeout 750
dhcpd allow inside
Terminal width 80
Cryptochecksum:XXXXX
: end
AKCPIX00 #.
Config looks good - just as domestic mine to my local network. The only thing I can think is that you may have entered commands in the wrong order - which means, you could have isakmp or encryption before the config map was complete. Write memory, then reloading the pix is a way to reset everything. If you do not want downtime:
mymap outside crypto map interface
ISAKMP allows outside
Enter these two commands should be enough to reset the ipsec and isakmp.
-
Original title: no network card
I installed a NETGEAR N300 Wireless USB Adapter on my computer which is a desk top Dell 64-bit running Windows 7 Edition Home Premium. There are five computers on my network. Two of the others use the same model of NETGEAR wireless USB adapt. I removed the Ethernet cable after the installation of the wireless adapter. I can say that the new wireless adapter works fine. When I tried to map the network I got the same message that appears in some of these problems: "Windows cannot create the network map. Responses of the other devices on the network are delayed or there is a router on the network incapatible". I have restarted this computer in SafeMode as suggested in the above problems. I tried other things like disabling the wired connection has always existed for the cable. No effect. Then I tried mapping the network on the other computers. All failed with the same message. All the other four computers are 32-bit. Three of these computers are also running Windows 7 Home Premium. They are the best desktop computers. The other computer is a Windows 7 Starter netbook running. It is the 32-bit computer, always using a cable. That will be replaced with the same wireless adapter model NETGEAR. Anyone know how to fix this or is this a bug? It would be nice of the network software of Windows 7 has worked as it is supposed to. TO.I went the last wired wireless computer and the problem disappeared. The five computers can view the map now without any problems.
-
iPhone 5 c cannot detect the network.
Since the last 9.2.1 update my iPhone 5 c cannot detect the network. Constantly 'finding '. It took to the local repair shop and he told me the imei is missing and only Apple can help. Any ideas, thank you.
A missing IMEI is a fatal error which cannot be set. This is usually the result of the attempt to jailbreak or hack the phone unlock illegally, but not exclusively.
Where, exactly, do you have the phone? It was jailbroken? Never 'unlocked' by one person other than the carrier, so it was initially locked?
-
Dear Sir
Migrated domain users are needed to access shared folders on the network with AD username old or need to share with the new AD IDI am in a field & I'll migrate with a domain name.EX: now I'm in the field of the AAA tomorrow my domain name will change to BBB. User accounts are created in two AAA & BBB and the two domain user IDs are different.data servers are also migrating with the new domain.is it possible to access share with the old user id folder in new field or both to share the files again with the new user ID Active directory.Kind regardsChauvet J.Hello
The question you have posted is related to professional level support. Please visit the below mentioned link to find a community that will support what ask you:
http://social.technet.Microsoft.com/forums/en/category/WindowsServer/
-
Hello - my laptop has a Wi - Fi connection and net access.
For a long time, I was using the laptop with the wireless connection. My router assigned 192.168.1.237 to the Wi - Fi connection. I was able to map the disk on the laptop and remote access.
A month ago I connecting the laptop to my home network via a wired connection to 192.168.1.172 - once again, I make me connections to and from the laptop.
Now, I disconnect the wired connection and now the laptop seems to have trouble finding the other computer on the network or if the laptop can be found
computer too.
Don't know if it's an OS problem or a problem with my router and DNS - any suggestions on how to get the laptap back on the network with the
WiFi would be appreciated.
NO, but a password is required to connect to the wireless network.
You must have a cryptographic, or otherwise you wouldn't need a password. If there is no encryption configured in your router, where is the need for a password from a?
Determine the IP addresses of other devices on your network (for Windows computers, run an ipconfig command in a command prompt window).
They should all be a 192.168.1.xxx where xxx is greater than 1 and less than 254. Are they?
Open a command prompt window and type
Ping
What is going on?
Given your description of what works and what does not work, I can only think of two possible explanations:
- Some firewall 3 rd-party blocks wireless connection: what security software is installed, including your antivirus program, any firewall program, any program antimalware, etc.. ?
- You are currently connected to the network wireless to a neighbor with the same SSID (network name). It would be very likely if you, indeed enter a password to connect wireless
-
Net 51 with a view system error
I have two boxes of Windows XP that I login as administrator account. I was able to synchronize files, map network drives and can do a tracert to reach one of them.However, when I perform a net view on, I get the following error
51 system error has occurred.
Windows cannot find the network path. Make sure the network path is correct and the destination computer is not busy or turned off the coast. If Windows still can't find the network path, contact your network administrator.
How to make this command work?
Hello
· Your computer is on a domain network?
Follow the steps in troubleshooting this article and check if that helps:
You cannot access shared files and folders or browse computers in the workgroup with Windows XP
http://support.Microsoft.com/kb/318030
See also this article that resembles the same error.
Error when you try to access shared resources on a computer that is running Windows 2000 or Windows Server 2003: "53 system error has occurred" or "51 system error has occurred."
-
I installed AVG 9.0 and now I get the MSN Explorer pop next message.
You can not connect to your mail server. There may be a problem with your Internet connection, or a problem with the mail server. Pleas try again.Sure. Analysis of your e-mail anti-virus program:
- Can slow to receive and send messages, or even fail.
- Can damage files of storage for messages that you've already sent and received, making it inaccessible messages.
- Is not necessary. If you receive an infected attachment and try to open it, the protective device in real time of your antivirus program will block the infection.
Here are a few web pages accurately:
Why you don't need your anti-virus program to scan your e-mail
The other threat email: the Corruption of files in Outlook Express
Why some antivirus software can change the settings in e-mail programs
Email scanning - advantages and disadvantages -
How do I share my internet connection?
I have two laptops that I use to connect to wireless internet. The problem is that I can't get two laptops to connect to the internet simultaneously. My sister and I must take turns to use the internet, even if we use a wireless router. The main reason we got a wireless router has been to share our internet connection!
I have:
Virgin Media (or Telewest broadband) modem
Belkin router wireless
Two laptop computers (which can connect to the internet - but not at the same time)Hello
If you have the wireless router, I see no problem here. Set your PPPoE connection router (the router supports a dynamic connection type). If wireless option can each laptop connected with or without the password (I don't know if you have one).
If the WIFI network on the router is set on, if please scan the area and choose View available wireless networks. I'm sure that the same wireless network will be available on two laptops. You just need good settings.
Maybe you are looking for
-
Paid for a single application (Prisma), served a different one (Radio)
Paid 2.99 for the Prisma photo app, when it finished downloading I found it had downloaded a pretty useless application called Radio. How can I get a weird error like this been fixed?
-
Drop sudden battery capacity T430s
Hello I have an eye to my stack report today and found something really awkward. I bought the computer seven months ago and the beginning of the battery with the theoretical capacity 44, 000wWh, while the load capacity full is much closer to the rate
-
iertutil.dll
-
Configuration automatic please wait blinks on the screen every few seconds, why?
Whenever I start my computer a small window with the text "Auto Config please wait" flashes in the center of the screen every two seconds. This continues for a few minutes. After that he produced intermittently, but each time that it the screen dims
-
Error code 8007041D__
Remember - this is a public forum so never post private information such as numbers of mail or telephone! Ideas: You have problems with programs Error messages Recent changes to your computer What you have already tried to solve the problem