Cannot show the dimensions of the image on a Mac?

Similar Questions

• Why Apple Watch cannot show the heart rate all implement open outdoor execution on?

  Why Apple Watch cannot show the heart rate all implement open outdoor execution on?

  Technical data has shown that he can do, but in fact can not?

  It is not good advertising. During the race I'm not for the convenience of drag any function. It is wet.

  This link should help you your heart rate. What it means, and where on Apple Watch you will find. -Apple Support

• My photo files do not show the image on the icon. (Windows 7)

  Does anyone know if it is a parameter; or what I need to do to make the image files to use the icon image. I've never seen a computer that does not have it. e.g. you want to an image file; normally, this file shows the image as an icon. My computer doesn't work. Can someone please!

  Does anyone know if it is a parameter; or what I need to do to make the image files to use the icon image. I've never seen a computer that does not have it. e.g. you want to an image file; normally, this file shows the image as an icon. My computer doesn't work. Can someone please!

  Hi Jack

  In addition to Jeeped view, open Windows Explorer, click on the organize button and select folder and Search Options. Select View Tab , and make sure that the always show icons, never thumbnails is not selected.

  I hope this helps.

  Thank you for using Windows 7

  Ronnie Vernon MVP

• Cannot create the Image of the system or system, unknown error repair disc: 0x80004005.

  Original title: cannot create the Image of the system or system repair disc

  I just bought a new Windows 7 computer. I tried to create a system repair disc, but still receive the error msg - error (0x80004005) unspecified. I tried - and lost - several DVDs in the process. Also, not able to create a System Image disc. The computer says that I have to format the drive and when I click OK, it goes through the movement, then gives me an error msg that the Format has failed. (In addition, it does me not the possibility not to format the drive.)  Very frustrating...

  Hi iamkira,

  This problem can be caused by a conflict with other programs installed on your computer, usually antivirus software. Follow the steps described in this document to create the drive in a clean boot state.

  Let us know if that helps.

• Hi can someone help me... I try to open my photos of microscope and all of them are just empty black screen while the merged file shows the image. I can't change grayscale in RGB color space (like my single images the info on them is

  Hi can someone help me... I try to open my microscope fluorescnece images and they are all just empty black screen while the merged file shows the image. I can't change grayscale in RGB color space (like my single images the info on them is gray and the merged image color space is RGB)

  Try to update your video card driver to exclude

  Then reset your preferences - with Photoshop CC you can do it in the preferences. Earlier versions require that you press the modifier keys that you launch Photoshop. Ctrl alt shift on Windows or cmd opt shift on Mac.

• Hello, I want to make an outline of the text that I created.  I started with a blue background.  Then, I created a text and changed the color of gold.  I then put on an image and used the clipping mask to show the image by the text. Problem

  Hello, I want to make an outline of the text that I created.  I started with a blue background.  Then, I created a text and changed the color of gold.  I then put on an image and used the clipping mask to show the image by the text. Problem is it gets rid of color and shows that the peak through the text.  I wanted a draft of the text with the picture.  Is this possible?

  Thank you

  Peter

  You're welcome, Peter.

• Cannot install VMware ESXi 4.1 "cannot find the image of the installed system.

  Started in iso ESXi 4.1 downloaded, burned on a CD, CD, go to the screens, press F11 to install.  Immediately get the following error:

  -

  ---

  The installation operation failed!

  The installation operation encountered a fatal error:

  Cannot find the image of the installed system.  This is due to the image being not mounted correctly or the CD-ROM not supported.

  -

  ---

  The material is a system of handcrafted with Intel DQ35JO Council, latest version of the BIOS, Intel E6850 CPU, 8 GB of RAM, 2 SATA drives.  I know this isn't on the list compatible but is a 'white box '.  I installed ESXi 3.5 on it in the past and got it working, and I saw other success stories with this Board/CPU.  Yes, I have activated the virtualization mode in the BIOS and powered down/up.

  Here is what I tried:

  -Redownload VMware-VMvisor-Installer - 4.1.0 - 260247.x86_64.iso to ensure that it was not corrupt (2 copies, against perfectly)

  --Also tried another drive (IDE) CDROM

  -Created a bootable USB using uNetBootin 4.7.1 and booted from it

  -Switched SATA setting in the BIOS from AHCI to IDE

  I get the same exact error.  I searched here and everywhere and don't find any reference to this error.

  Help - all do you offer for my next step?

  Have you had a previous vSphere installed on your system?

  I had the same error on my 'white box' (in fact, it is black).  I used to run esxi 4.0 (u2) on my Acer X 3300 (6 GB, Quad Core AMD Athlon II).  Controllor internal SATA is not supported, but it allows me to use the box for normal windows task and ESXi is sitting on a SDHC 4 GB flash card.

  When I started my freshly burned ESX4.1 cdrom, I got the same error.   I thought that the fact that maybe there was an existing install on my destination drive (the flash memory card), and that the CD could not perform an upgrade.

  So, I tried the upgrade path (first trying to utility of the host and the .xml error message).  After reading the manual, I did the upgrade from 4.0 to 4.1 using the device of vMA and I must say that esxi 4.1 works great on my white box.

  Then I suggest that you try upgrading and see how far that gets you.

  Good luck (and a beautiful weekend)

  Marino

• Cannot create the image of the system under win7 64 bit

  I can't create a system image of my entire system and save the image to another hard disk.  I always get internal error ' 0 x 80070424.  I here to detect my other readers (also tried to connect an external hard drive) i get presented with the internal error message.  I don't stand less why I just do a clean install.

  The installation went with a hitch.

  System
  Card mother "Gigabyte X48T-Dq6 with the latest version of the bios installed.
  Core 2 duo quad core 2.6 Ghz cpu extrime.
  4 GB of ddr3 RAM.
  3 * 500GB & 1 * 1 TB hard drive
  XFX Gforce 295 1.7 GB of ram
  Ed xfi Platinum sound card
  DVD - rw standard

  Hi spyman1871,

  Try the checkdisk Defragmenter and disk running from the command prompt.

  Step 1: Checkdisk to run as administrator command prompt

  To do:

  1. go to start and type cmd in the search box.

  2. right click on cmd in the list and select run as administrator.

  3. click on Yes in the user account control prompt.

  4. If you want to repair errors without scanning the volume for bad sectors, at the command prompt, type chkdsk volume: / f, and then press ENTER.

  Note If one or more files on the hard disk are open, you will receive the following message is displayed:

  Chkdsk cannot run because the volume is in use by another process. You want to schedule this volume to check the next time that the
  the system restarts? (Y/N).

  Type there, and then press ENTER to schedule the disk check, and then restart your computer to start the disk check.

  5. to fix the errors, look for bad sectors and recover readable information, at the command prompt, type chkdsk volume:/rand press ENTER.

  Step 2: Run the command prompt Disk Defragmenter:

  To do this, type the following in the command prompt window.

  defrag c:-v,

  where C is the drive letter. You can choose according to the reader like you would to run disk defragmentation.

  Note: the command quick application shows no indication of progress, so be patient.

  The Windows Live OneCare scanner cleaning will find and remove the invalid registry on your PC. Cleaning scan will check your registry and
  Locate all items that can be deleted safely. You can then choose to delete all the items that the Analyzer detects or select the individual items for removal.

  http://OneCare.live.com/site/en-us/Center/cleanup.html

  See also this thread with a similar problem for more ideas on how to solve this problem.

  http://social.technet.Microsoft.com/forums/en/w7itprogeneral/thread/55f5fe3a-a1cb-4855-ba4d-73f32c202246

  Kind regards
  Amal-Microsoft Support.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot remove the Image event listener

  I'm clearly missing something and would be grateful for the help.  I'm trying to run an event handler when a full picture of loading, then remove the Manager so that it does not once again the image needs to be reloaded later.

  The problem I'm having is that the event handler simple custom ' disappear, despite the call removeEventListener on the Image object.

  The following example illustrates the problem (the example do anything useful... it's just the shortest example to demonstrate the problem).  (To run the application, you will need to provide any file JPEG ol ' named 'myImage.jpg' in the directory 'src' to your project).

  What to expect to happen is:

  (1) at startup, the image loads and runs of loadComplete().

  2) loadComplete removes the event listener so that subsequent re-loads don't get re-triggers the Manager.  I want only the Manager to run once.

  3) 'loadComplete' should appear in the debug console.

  (4) a click on the button should display only 'change picture' in the debug console

  What I get instead is that Manager loadComplete is not removed, and whenever I click on the button, loadComplete runs when the image is re-load (i.e., each button click results in the showing in the debug console 'change picture' AND 'loadComplete' ).

  <? XML version = "1.0" encoding = "utf-8"? >
  " < = xmlns:mx mx:Application ' http://www.Adobe.com/2006/MXML "layout ="absolute"> "
  "<mx:Image width ="655"height ="181" source =" myImage.jpg" id ="MyImage" autoLoad ="true"="true"scaleContent complete =" loadComplete () " ="100"x ="100"/ >
  < mx:Button = "100" x = "341" label = "Button" click = "click (event)" / >
  < mx:Script >
  <! [CDATA]
  private void loadComplete(): void
  {
  trace ('loadComplete');
  myImage.removeEventListener ("complete", loadComplete);
  }
  private void click(evt:Event):void
  {
  trace ("change Image");
  myImage.load ("myImage.jpg");    Reload image even; This is just an example
  }
  []] >
  < / mx:Script >
  < / mx:Application >
  

  Hello

  You can only remove event listeners you added with the addEventListener() method in an ActionScript block. You cannot remove an event listener that has been defined in the MXML tag, even if it has been registered by using a call to the addEventListener () method that was made within an attribute of the tag.

  Check this page for reference.

  http://livedocs.Adobe.com/Flex/3/HTML/Help.HTML?content=events_05.html

  You can change the code a bit get it works

  
  
  private function myImage_creationCompleteHandler(event:FlexEvent):void
  {
       myImage.addEventListener("complete",myImage_completeHandler);
       myImage.load("myImage.jpg");
  }
  
  private function myImage_completeHandler(event:Event):void
  {
       myImage.removeEventListener("complete",myImage_completeHandler);
  }
  

• When I click on "Copy picture", when I use the dough, it's to show the image URL

  Hello

  I'm having a problem about the exemplary Image resource. I need to copy and paste a lot of images to work.

  I click on an image, holding control and then press "copy picture". But when I paste, it shows the URL of the image and not the image. I tried on different browsers and apps, but the same error occurs.

  Can someone help me please? How should I do? It has changed from one day to the other.

  Thank you

  It looks like you use context Menus to copy your images. Depending on your machine or software, each user will have different contextual shortcuts.

  You might do better to use an application like SnapnDrag, which is free in its basic mode.

• NB100 - cannot create the image of the main partition

  Hello.

  I am a Toshina NB100 user and I am happy with my netbook, but I have a problem.

  I always work with partition on my hard drive. 20GB primary partition and the secondary partition have 100 GB.
  I have the windows xp operating system on the primary partition, and on the secondary partition I music, photos, programs, games, etc.

  When I want to created an image of my main partition with Acronis partition magic or with other programs the NB1000 do not recognize the hard drive, the machime write a caption "I can not find the HD. I thing that the problem is the fault of the Bios.

  Anyone know of this problem? or maybe someone could do?

  Hello

  I doubt that it is a BIOS problem.

  The fact is that the laptop uses the SATA HDD controller and your imaging software cannot recognize the HARD drive due to lack of SATA drivers.

  The Intel Matrix Storage Manager package located on the Intel page contains the necessary files to the SATA.

  Good bye

• cannot show the desktop on the envy Touchsmart screen

  I can't show the desktop on the screen of my laptop Envy 17 quad touchsmart with Windows 8 t, although other images, such as screen saver can be seen.

  Hello @CJ867 ,

  Welcome to the HP Forums!

  I see that you are having problems with the screen does not display is not on your ENVY 17 laptop. I will do my best to help you with this.

  Can you tell me if the office applications appears or if only the splash screen and apps work? Or is it only the background is black, but you can see the icons and the system tray?

  If it is a new issue, there were recently some updates Windows that were originally black screens after login and it could be related. I suggest you perform a restore system before the issue started. You can see how to do this here: (Windows 8) system restore.

  The system restore is usually confused with a system refresh or reset. Recovery allows to uninstall updates, drivers or software that was installed after the restore point, but will not delete your personal files.

  Let's start with that. Let me know if it helps!

• Why should I update in Help and Support to show the images?

  I just noticed that ALL of the help and support for my Windows 7 Home Premium 32-bit have been showing a broken image icon, but if I hit the refresh of the image appears. How can I fix so I don't have to hit refresh?  And if you answer improves my Windows operating system, as I saw in the Knowledge Base, I redirect every "Microsoft Help Desk" Virus detected on your computer phone scam that I get from your call center.

  Hello

  Thank you for the information. I appreciate your efforts to resolve the issue.

  I suggest you to check if you are facing the same question in another user account.

  You can create a new user account on your computer, and then check.

  Create a new user account-
  http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account

  If you are not faced with the same question in a new user account, you can check the link below and use the steps in the condition to set a user profile corrupted.
  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

  Hope this information helps.

  Please reply with the results, in order to help you solve the problem.

  Thank you

• cannot change the images downloaded from the iphone 4S

  Photos uploaded from iPhone4s on PC Windows 7 cannot be renamed, copied, changed or anything else. I get a message "error code: (0 x 80070057) '"

  Photos uploaded from iPhone4s on PC Windows 7 cannot be renamed, copied, changed or anything else. I get a message "error code: (0 x 80070057) '"

  ===============================================
  I don't know if the following links answer your question, but
  they may be worth a visit:

  Good luck and * proceed at your own risk *.

  FWIW... There is a very long discussion (several pages) to the
  following link:

  Cannot change the imported iPhone 4S photo
  https://discussions.Apple.com/thread/3444951?start=0&TSTART=0

  More Discussion

  iPhone 4S image properties is not compartible with Windows?
  Editing can be done on the computer due to the error
  "Windows Photo Viewer cannot save changes to this picture.
  because there is a problem with the properties of the image file".
  Any help?
  https://discussions.Apple.com/message/17291884#17291884

  More Discussion:

  We cannot turn a few photos in Windows 7 (but can turn others)
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/cant-rotate-some-photos-in-Windows-7-but-can/3a809845-9144-4BB1-9bb3-ab4f5b856524

  A simple solution is to open the photos in paint or most other
  digital image editor and modify it.

  Some people have reported success using the following free download
  to remove the metadata.

  Property restrictions stripper iphone 4S (JPEG & PNG Stripper)
  http://www.SteelBytes.com/?mid=30&cmd=download&PID=15

  Here's a way to turn...

  Easily turn locked iPhone 4 and 4 s Photos in Windows 7 with
  the rotator Lossless JPEG free
  http://www.daleisphere.com/easily-rotate-locked-iPhone-4-and-4S-photos-in-Windows-7-with-the-free-JPEG-lossless-Rotator/

  Free download JPEG Lossless rotating
  http://annystudio.com/software/jpeglosslessrotator/

• Cannot save the image after you change

  original title: picture change

  I try to rotate a photo and save it, but a message will apear and says cannot save changes because there is a problem with the file

  original title: picture change

  I try to rotate a photo and save it, but a message will apear and says cannot save changes because there is a problem with the file

  ===============================================
  I don't know if the following links answer your question, but
  they may be worth a visit:

  Good luck and * proceed at your own risk *.

  FWIW... There is a very long discussion (several pages) to the
  following link:

  Cannot change the imported iPhone 4S photo
  https://discussions.Apple.com/thread/3444951?start=0&TSTART=0

  More Discussion

  iPhone 4S image properties is not compartible with Windows?
  Editing can be done on the computer due to the error
  "Windows Photo Viewer cannot save changes to this picture.
  because there is a problem with the properties of the image file".
  Any help?
  https://discussions.Apple.com/message/17291884#17291884

  More Discussion:

  We cannot turn a few photos in Windows 7 (but can turn others)
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/cant-rotate-some-photos-in-Windows-7-but-can/3a809845-9144-4BB1-9bb3-ab4f5b856524

  A simple solution is to open the photos in paint or most other
  digital image editor and modify it.

  Some people have reported success using the following free download
  to remove the metadata.

  Property restrictions stripper iphone 4S (JPEG & PNG Stripper)
  http://www.SteelBytes.com/?mid=30&cmd=download&PID=15

  Here's a way to turn...

  Easily turn locked iPhone 4 and 4 s Photos in Windows 7 with
  the rotator Lossless JPEG free
  http://www.daleisphere.com/easily-rotate-locked-iPhone-4-and-4S-photos-in-Windows-7-with-the-free-JPEG-lossless-Rotator/

  Free download JPEG Lossless rotating
  http://annystudio.com/software/jpeglosslessrotator/