Cannot start a new conversation with relay of sms on the Mac or iPad.

Very strange problem and I have tried seemingly everything. SMS relay works fine on all my Apple devices. I can send and receive messages either SMS or iMessage. However, I can't start a NEW conversation with relay. I can only answer to the conversations that are already started. (does not matter if I started or the other party)

When I want to send texts to my boyfriend who doesn't have an active conversation in the list of messages I have to text him to my main iPhone (that the relay is activated on) and after that the convo appears right in messages on mac, the other my iPhone and my iPad, and I can continue to send messages from any device.

I tried to close off the coast of relay and allows once again. Restart the phone. Restart the mac. Disabling iMessage on the iPhone. Ensure that all devices are on the same wifi network. A lot of things that shouldn't matter...

A few tips here after a reset of the iPhone?

Also note that my iPhone is running iOS 10 beta 2 now, BUT I had this problem for some time. Long before I had the beta version.

Advertisement

Well, that's disappointing...

Tags: iPhone

Similar Questions

  • Anyway to interrupt a conversation iMessage and start a new conversation, with no history?

    My sister and I, on the coast of the United States, facing each other, use iMessage.  My brother was in the hospital and it has updated me on his State.  He died yesterday.  I want to continue to use iMessage whenever I can, but I don't want to continue to see messages to him with details of his failing health.  Is it possible to access a new conversation with her, so I can't see the previous posts?  It's very painful.

    Currently using the last update everything on the iPhone 6, 64gig.

    Delete the conversation, and then start a new. The new conversation is started, none of the old iMessages will show.

    If you're in the conversation in Messages, leave the conversation by pressing the blue "< Messages" at the top of the screen.

    Press 'Edit' at the top left of the screen

    Select the conversation (check the bubble on the left)

    Press 'Delete' in the bottom right

    You can also select individual messages to remove from an existing conversation by:

    Tap/hold on the desired message

    Select 'other '.

    Check the individual messages you want to delete

    Press the trash downstairs left

    Press 'Delete Message'

    You also have the option here of 'Delete All' at the top left of the screen

  • Disable "start a new process with the data of this task.

    Hi all

    As the title says, I would like to disable "start a new process with the data of this task.

    Because I find that it will not work with form preparation process has data, I understand that you can fix by some changes to the procedure of data preparation, but I don't have time at the moment.

    Here is the screenshot to show what is a function 'Start a new process with this task data' in the workspace.

    new_process.JPG

    Concerning

    Bill

    I think your only option is to customize the Worksapce interface.

    I'm sorry.

    Jasmine

  • Cannot start/open new Premiere Pro trial - error flag reading - on demand could not start properly _ 0c000001d click OK to close the application

    Dear Forums

    Cannot start/open new Premiere Pro trial - error flag reading - on demand could not start properly _ 0c000001d click OK to close the application

    * Also, I sent my first question 20 minutes ago, not yet approved? Your return indicated "approved" e-mail, * why do I not see my question below still displayed? >

    The members of the Forum Pro first - Hello


    Can someone out there describe in simple basic procedure, how a first time user start using Premiere Pro to the layer just a moving figure video of 5 minutes (a friend aerial artist model with white moving belt in silk on a rest mainly black background layer and a change to a night sky stars panorama I photographed previously?)

    I know that this can easily be done, I have worked in thousands of still images with creative cloud for previous years, but not yet in video in Premiere Pro, so thanks for any advice.

    I enclose the actual video that I use and some samples of the fields of the night sky that I photographed recently for ideas

    I intend to make possibly more elaborate, but for now if anyone of you could just show the basic commands and menus/menus to start to do it simply and quickly. Maybe how to most later convert it tone black & white or sepia. The ideas here is to recreate a sequence modern suite of familiar German Film, wings of desire. Perhaps also a progression in the future to create an effect of the night sky very slowly turning into one layer background behind the main façade first video layer in normal movement. Then maybe a little further - how to adjust the speed of the front to a path layer more slow half price while keeping the substantive motion, the original speed. (* although I realize that I didn't do in 64 fps for the slow movement, I am not concerned about that and would actually welcome a light old world "flip effect framework" as if, in appearance of the films more former silent motion.) * In addition, possibly cutting on 'dead time' a few seconds at the beginning of the video and the 2nd or 3rd time for a few seconds of this unexpected error, when the silk scarf fell on the camera lens (without changing the audio timeline?)

    * (I use Windows 7 on a Toshiba Satellite L555 - [only RAM 4 MB. rates], 2009)

    * Video sample >

    Sarah Seiler Aerial - camera Check-An Unedited manifesto-Dec 16 2015 - YouTube

    * Background samples >

    w-left-west-frames-with-earlier_sept-8_9-2015_1_stitch-mercator-projection-2a-titles-5000-pxl-b_galaxies-at-right-enlarged-5500-pxl http://www.dpreview.com/galleries/1579463287/photos/3374478/Trillium-Lake-Aurora-add-26-ne

    Comet Lovejoy Andromeda brand camera telescope DSC3857-1a-blue-light-increase-layer-Nov 20 2015: Mark Seibold: Galler...

    Larch Mtn Night Sky Sony NEX5R 5 Oct 2015_panorama point 2 b side of cropped rt 3000 pxl: Mark Seibold: galleries: digital...

    Cannon Beach Haystack Rock mamiya 55mm 25 2015_10_stitch_102 26 Aug frames Projection of Mercator Crop dark as he nu Fi...

    Trillium Lake Mount Hood Dark Night Sky Nov 10 2014_stitch a 5000 pxl f to fill 2: Mark Seibold: galleries: Digital P....

    Thanks so much for all the advice of one of you in the Adobe Premiere Pro forums,

    Mark E. Seibold, artist-astronomer, Portland Oregon

    Duplicate thread here: may describe in the simple basic procedure, how a first time user start using Premiere Pro to the layer just a moving figure video of 5 minutes (a model friend artist air with white passage belt mainly black silk )

    Thank you

    Regalo

  • Program cannot start because wlidcli.dll is missing. Try reinstalling the program to fix this problem.

    I'm trying to set up parental controls for my son.  I get this error at all times and must go to the process in the Task Manager to get the message to stop appearing.  I installed twice things of all Live essentials - all of them even if I don't want or need all - and still get this error message.

    When I go to the website of parental controls and select WLFS in the box for additional controls and then click user account from my son a pop-up message appears and disappears so fast, that I do not see what is the error message.

    How can I fix it?

    Thank you

    Original title: program cannot start because wlidcli.dll is missing.  Try reinstalling the program to fix this problem.

    Hello

    It is possible that you setup parental controls are corrupt. To resolve this issue, follow these steps:

    1. Uninstall Essentials by using the CMD line parameter. Please follow the steps in this link:

    How to uninstall Windows Essentials through the CMD line parameter

    2 remove the Windows Live folders on the following directories:

    C:\Program Files\Windows Live
    C:\Program Files\Windows Live Files\Fichiers

    Note: If there is more than one Program Files folder when you open the C drive, and then double-click Program Files x 86 instead.

    3 reinstall Windows Essentials. Please refer to this article for the download link:

    Windows Essentials 2012

    Thank you!

  • How can I replace my app on iTunes Connect with a new version with air for iOS and app Loader?, how do I replace my app on iTunes Connect with a new version with AIR for iOS and the Application Loader?

    How can I replace my app on iTunes Connect with a new version with air for iOS and app Loader?, how do I replace my app on iTunes Connect with a new version with AIR for iOS and the Application Loader? I got an error that the version number needs to be updated. I created a new record in iTunes Connect with version 1.1 and I took ownership of my current app 1.1 in air for iOS section in Flash.

    Check your descriptor file to make sure that it shows the updated version, too.

  • This device cannot start. (Code 10) with a hard usb pen and readers for windows 7

    Recently, I used acronis true image to migrate my hard drive to an ssd from 250 to 500, the problem is on the new drive I get "this device cannot start. (Code 10) "error every time I try to use a USB key or external hard drive on the new image, the old image is fine. I tried all the usual alternatives to surf the web;

    Reset

    Re-creating image several times.

    uninstall all the usb drivers on Device Manager Associates,

    update drivers,

    using the microsoft error fix program (fails to answer to find bespoke online solutions).

    Any help would be useful.

    Kind regards.

    Hello Scott,

    Thanks for posting your query in Microsoft Community.

    I understand that you have problems with USB devices in the computer.

    I would like to know some more information on this issue to help you better.

    (1) that Microsoft fix program error have tried?

    (2) remember to make changes to the computer, before this problem?

    In the meantime, you can try to follow the following suggestions to solve the problem.

    Actually code 10 occurs mainly because of devices and hardware driver issues or because of compatibility problems between the drivers of equipment and additional software that is installed on the windows.

    FIX: "this device cannot start" error Code 10 in the Device Manager in Windows

    http://support.Microsoft.com/kb/943104/en-us

    Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

    Registry backup
    http://Windows.Microsoft.com/en-GB/Windows/back-up-registry#1TC=Windows-7

    I hope this helps. Otherwise, feel free to write us again for more assistance, and we will be happy to help you.

    Thank you

  • Cannot create a new startup with my data disc

    Hi guys, here's the problem: when I try to create a new startup with my data disc, I can't boot from this drive.

    The startup progress bar takes forever and then I see a white circle with a line through it. ("Prohibited" / "Ghostbusters" sign.)

    In verbose mode, it hangs on "break pci: SDXC ' for a while, then it clears the screen and watch the Circle + line with 'still waiting on the root device' at the bottom left.

    I can't boot into single user mode. Quite simply, there is the same thing as verbose mode. Even in safe mode. So I have few options for debugging. I did a SMC reset, no change. Is there anything else I should try?

    Additional information:

    -I'm trying to start off a new SSD that I bought, currently in a USB 3.0 enclosure external. I know that all is well with the speaker because I started off of him several times in the past. I know that all is well with the reader, because I tried to do the same process with another drive and it doesn't work the same way.

    -J' cloned my current boot drive to the new drive with SuperDuper!, Carbon Copy Cloner and I also did a clean install of El Capitan using recovery mode. The new facility has worked well until I migrated my old data.

    - So there must be something in my data which are striated throughout this process. I don't know what it is maybe or how to track him down.

    Any thoughts are appreciated!

    Have you tried the PRAM reset? Restart while pressing control + command + P + R until you hear the boot chime at least twice.

  • Cannot open a new window of an existing window since the last update.

    The shortcut on the desktop no longer works, it won't launch in my Start menu, from my quick launch area or in the program file itself. Since I already have a browser window open I am able to open a new window in the menu browser & in opening a new tab & "moving" towards a new window... but if I always close all the windows browser (as for a reboot) I'll be screwed.

    Firefox is my main browser if it would be great if it could be repaired.

    Hello

    Some Firefox problems can be solved by performing a clean reinstall. This means that you remove Firefox program files, and then reinstall Firefox. Please follow these steps:

    Note: You can print these steps or consult them in another browser.

    1. Download the latest version of Firefox from http://www.mozilla.org office and save the installer to your computer.
    2. Once the download is complete, close all Firefox Windows (click on quit in the file menu or Firefox).
    3. Remove the Firefox installation folder, which is located in one of these locations, by default:
      • Windows:

        • C:\Program Files\Mozilla Firefox
        • C:\Program Files (x 86) \Mozilla Firefox
      • Mac: Delete Firefox in the Applications folder.
      • Linux: If you have installed Firefox with the distribution-based package manager, you must use the same way to uninstall: see Install Firefox on Linux. If you have downloaded and installed the binary package from the Firefox download page, simply remove the folder firefox in your home directory.
    4. Now, go ahead and reinstall Firefox:
      1. Double-click on the downloaded Setup file and go through the steps in the installation wizard.
      2. Once the wizard is completed, click to open Firefox directly after clicking the Finish button.

    More information on the resettlement of Firefox can be found here.

    WARNING: Uninstaller or the use of Firefox and not run a third remover as part of this process, because who could permanently delete your Firefox data, including but not limited to, extensions, cache, cookies, bookmarks, personal settings and passwords saved. These can be recovered, unless they have been backed up on an external device!

    Please report back to see if this helped you!

    Thank you.

  • When I start a new page in FF4 is always on the right side of the screen and the menu bar also goes by the window. If I click on the address bar is displayed correctly

    It is a problem I've had since the first race of FF4 beta. All sites are on the right side of the window to start a new page, then it works very well after the first.

    Create a new profile exclusively for version 4.0 beta and create a shortcut on the desktop with Pei 'profile' attached to the target to launch this profile.

  • New computer with Windows 7, stuck on the specific update

    Hello world!
    I have recently (last Saturday) purchased a new HP laptop with Windows 7 installed. The computer is now going through the standard (I guess they are standard) updates for Windows and successfully completed several rounds of them. Last night after having turned it off the computer began another series of updates, with 14 in the total bundle. She started 1 of 14 around 20:00 and started 4 of 14 at 22:30. From 08:30 the next morning, he was still on 4 of 14.
    Is this an update that takes 12 hours to install, or is there another problem causing my computer to not to go beyond the update? I found no way to bypass the update or cancel it.

    Thank you!

    Hi Kristi,

    Are you able to boot to the desktop now?

    Let us check that the windows update history for the error code.
    1. Click Start, click all programs, and then click Windows Update or Microsoft Update.
    2. on the Windows Update Web site or the Microsoft Update Web site, click on view update history. A window opens that displays the updates that have been installed or that have failed to install on the computer.
    3. in the status column of this window, find the update failed to install, and then click the red X.
    A new window opens that displays the installation error code.
    4 write down the error number and post it back.

    Until you can, let us perform startup repair that may help you resolve the issue.

    Startup Repair is a Windows Recovery tool that can fix certain system problems that might be preventing Windows to start. Startup Repair scans your computer for the problem and then tries to fix it so that your computer can start correctly.

    Follow the instructions in the link below to perform the Startup Repair.

    Startup Repair: frequently asked questions
    http://Windows.Microsoft.com/en-us/Windows7/Startup-Repair-frequently-asked-questions

    You can check the link below:
    The update is not installed successfully, you receive a message, and the computer restarts when you try to install an update in Windows Vista and Windows 7
    http://support.Microsoft.com/kb/949358

    Please post back and let us know if it helped to solve your problem.

    Kind regards
    KarthiK TP

  • Intel(r) management Engine Interface cannot start (code 10), I get this message whem check the computer Device Manager

    I get this message whem check the computer Device Manager

    Intel(r) management Engine Interface cannot start (code 10)

    Thanks Ephraim

    Please provide us with your administrative Event Viewer logs by following these steps:

    Click on Start Menu
    Type eventvwr in the find programs and files (do not hit enter)
    Click with the right button on eventvwr.exe and click Run as administrator
    Expand custom views
    Click the administrative events
    Right-click Administrative events
    Record all events in custom view as...
    Save them to a folder where you will remember which folder and save it as Errors.evtx
    Go where you saved Errors.evtx
    Make a right click Errors.evtx-> send to compressed (zipped) folder of->
    Download .zip here (if you can) to skydrive or a file sharing service

  • Cannot start Win 8 OS from a drive Blueray on the new HP Envy Phoenix h9-1340 t

    I have a (serious an ISO image) Win 8 DVD which starts fine on other machines (with DVD players).  But it is not recognized on my Phoenix at all. When I try to boot from it the Phoenix immediately jumps to the installed WIn 8 OS. It's strange because a separate server for WIn 2012 DVD is recognized at startup on the same computer.

    The "DVD" on the Phoenix is described as 'BD - ROM' which means it's a blueray player.  (Samsung hpBDEDH12E3SHB). I don't know if there is a problem playing DVD on a blueray bootable, in general, or if the boot media should really be a blueray disc.  Also, I couldn't find any Phoenix BIOS settings reference "blueray" when I tried to make number 'a' in the boot order (I do not think that it falls into the category "ATAPI" I saw there.) What gives here?

    Any thoughts on this much appreciated scrmabled mess.

    TIA,

    me

    PS even if I can't boot from DVD 8 Win I can read this content once that Windows 8 is in place.

    Answer: to my surprise, in contrast to the previous BIOS, I used it, the peripheral BlueRay does NOT appear in the UEFI BIOS unless the disc is inserted ("power") before a reboot. This means that I can't select it as 'first' in the BIOS boot order section because it does not appear as an option.

    Put a disc in the day of BlueRay, reboot the computer, by pressing "esc" during the boot process, and then selecting F9 causes the blue device appear as a selectable boot option. After selecitng the process took 30-45 seconds but "Press a key to start" appeared and I could boot from the Blueray.

  • ESXi 5.1 cannot start a virtual machine with Admission check has no memory error

    I see that there were a number of people who have this error and adjusting the reserve memory for the VIM under resources system has solved this problem, but not for me. My booking in the VIM process setting is '0'. Vital signs:

    Reference Dell T110 II server

    4 GB OF RAM

    Intel Xeon processor E31220 @ 3.10 GHz

    4 cores of the processor

    Hard drive 500 GB

    ESXi version 5.1

    A Linux VM with 4 GB RAM allocation, 2 cores of CPU and 45 GB of storage.

    Error I get on a attempted to start:

    Has no power on the virtual machine.

    Could not power on VM: check for Admission has no resource memory see the management of VMware ESX Resource Guide for management information settings.

    Group vm.4757: invalid memory for VM vmm0:Mitel_Applications_Suite allocation settings. (min: 524288, max:-1, minLimit:-1 actions:-4, units: pages)

    Group vm.4757: can not admint VM: admission of memory has failed. booking request: 536579 pages

    I changed the memory to the VM all the way up to 1 GB, no change.

    I played a bit with the allocation of memory VIM, no change.

    A fact interesting is that the Allocation of resources for the tab host watch memory @ 1747MB capacity, capacity reserved @ 0MB and available @ 1747MB capacity, but I have 4 GB of RAM and the vSphere Client shows it under the Configuration tab.

    Take a look at this blog post: http://www.vmwarearena.com/2012/07/failed-to-power-on-vm-admission-check.html

  • Cannot start a virtual machine with more than 1 CPU socket added

    I've set up a few boxes of ESXi 5.5 with the free license in recent weeks, they have all been without problems so far. All 4 servers have the same exact hardware

    Environment:

    Dell Poweredge T620

    E5-2630 2 Intel CPU

    40 GB OF DDR3 ECC RAM

    ESXi is installed on 2 x 146 GB 15 K SAS drives RAID-1

    Data for virtual machines store are 8 x 600 GB 10 K SAS RAID-10 disc

    Guest operating system is Server2012r2 on all virtual machines

    Installed it on ESXi 3 previous were conducted with custom ESXi 5.5 Dell without problem.

    The 4th is where I will have questions. I used the following ESXi installed just in case there is a bug somewhere

    5.5 of VMware ESXi

    ESXi 5.5 customized by Dell

    5.5 U1 of VMware ESXi

    Any version of the ESXi I use I can't have a virtual machine to begin with more than 1 CPU socket added to it. The virtual machine does not start even the VMWare BIOS. I tried the Bios EFI as well with no luck. The error message I get in the events is ' fatal error VMware ESX: vcpu (vcpu-X)-X:VM - entry failed; Valid VMCS (error code 8). The vcpu-X is always another. I have attached the log file is created. If I give the VM 1 single processor TI starts very well. I'm at a loss as to what could be the issue.

    Problem is solved. I caught another server with identical hardware, verified it worked properly, then started to swap parts between them. Turned out to be CPU1. Once this has been replaced from a working server I have not had any problems. Warranty has been appealed.

    Thanks for all the help!

Maybe you are looking for


HashFlare