Cannot start a virtual machine with more than 1 CPU socket added

Similar Questions

• Cannot create a virtual machine with more than 256 GB

  I thought that the max capacity 2 TB vm. but I can't create a virtual machine more than 256 GB. what I am doing wrong?

  Thank you

  You probably use a block size of 1 MB, which limits a single HDD 256 GB.  You will need a larger block size

  1 MB = 256 GB

  2 512 GB

  4 MB = 1024 GB

  8 MB = 2048 GB

• The list of all virtual machines with more than 2 virtual disks

  Hello.

  I want to list all virtual machines in a data center vCenter, who got more than 2 virtual disks. Here's the workflow, I am working on that:

  1 get the view of data center

  2. get the Cluster Data Center view like the 'begine_entity '.

  3. for each view cluster overview the VirtualMachine bit cluster seen as 'begin_entity '.

  4. for each VM view, this information: VirtualMachine-> config-> hardware-> device of

  Above information is a table.

  I need help in order to extract information from this table disk, then run an if condition where the VM who got more than 2 discs should print.

  Could help you. I wrote the script to the point 4. just need advice for the posterior.

  Thank you.

  You can try one of the following values-

  1 If ($vm-> {'summary.config.numVirtualDisks'} > 2) {...}

  2 $diskCnt = grep {$_-> isa ('VirtualDisk')} @{$vm-> {'config.hardware.device'}};

  The above assumes that you've got your $vm with a filter property as follows:

  $vms = Vim::find_entity_views (view_type-online 'VirtualMachine'), the properties-online ['summary.config.numVirtualDisks', 'name', 'config.hardware.device'];

  my $vm foreach (@{$vms}) {}

  ...

  }

• ESXi 5.1 cannot start a virtual machine with Admission check has no memory error

  I see that there were a number of people who have this error and adjusting the reserve memory for the VIM under resources system has solved this problem, but not for me. My booking in the VIM process setting is '0'. Vital signs:

  Reference Dell T110 II server

  4 GB OF RAM

  Intel Xeon processor E31220 @ 3.10 GHz

  4 cores of the processor

  Hard drive 500 GB

  ESXi version 5.1

  A Linux VM with 4 GB RAM allocation, 2 cores of CPU and 45 GB of storage.

  Error I get on a attempted to start:

  Has no power on the virtual machine.

  Could not power on VM: check for Admission has no resource memory see the management of VMware ESX Resource Guide for management information settings.

  Group vm.4757: invalid memory for VM vmm0:Mitel_Applications_Suite allocation settings. (min: 524288, max:-1, minLimit:-1 actions:-4, units: pages)

  Group vm.4757: can not admint VM: admission of memory has failed. booking request: 536579 pages

  I changed the memory to the VM all the way up to 1 GB, no change.

  I played a bit with the allocation of memory VIM, no change.

  A fact interesting is that the Allocation of resources for the tab host watch memory @ 1747MB capacity, capacity reserved @ 0MB and available @ 1747MB capacity, but I have 4 GB of RAM and the vSphere Client shows it under the Configuration tab.

  Take a look at this blog post: http://www.vmwarearena.com/2012/07/failed-to-power-on-vm-admission-check.html

• [Q] cannot start a virtual machine - internal error [SOLVED]

  Hallo,

  I installed Workstation 8 and cannot start a virtual machine - or those created those previous or new. Turn the machine gives me an "internal error."

  My characteristics: Win 7 64-bit (SP1), Core i7 2600 K with 8 GB of Ram

  The newspaper of vmware:

  011 10 - 03 T 19: 22:38.013 + 02:00 | VMX | I120: Log for VMware Workstation pid = 3424 version 8.0.0 = Build = build-471780 option = output
  2011-10 - 03T 19: 22:38.013 + 02:00 | VMX | I120: The process is 64-bit.
  2011-10 - 03T 19: 22:38.013 + 02:00 | VMX | I120: Host = encoding windows-1252 = windows-1252 codepage
  2011-10 - 03T 19: 22:38.013 + 02:00 | VMX | I120: Host is Windows 7 Home Premium, 64-bit Service Pack 1 (Build 7601)
  2011-10 - 03T 19: 22:37.713 + 02:00 | VMX | I120: VTHREAD initialize main thread id 0 "vmx" host 6336
  2011-10 - 03T 19: 22:37.738 + 02:00 | VMX | I120: Settings REGIONAL windows-1252-> user NULL = System = c07 c07
  2011-10 - 03T 19: 22:37.738 + 02:00 | VMX | I120: Msg_SetLocaleEx: HostLocale = windows-1252 UserLocale = NULL
  2011-10 - 03T 19: 22:37.743 + 02:00 | VMX | I120: FILE: FileLockDynaLink: other process validation tools are: available
  2011-10 - 03T 19: 22:38.014 + 02:00 | VMX | I120: Hostname = KOENIG
  2011-10 - 03T 19: 22:38.017 + 02:00 | VMX | I120: IP = d fe80::41: e6a3:5dd2:fa9f % 11
  2011-10 - 03T 19: 22:38.017 + 02:00 | VMX | I120: IP = fe80::1cf:3682:36e8:4ccb % 17
  2011-10 - 03T 19: 22:38.017 + 02:00 | VMX | I120: IP = fe80::1 d 80: 2f6e:979 c: b57d 18%
  2011-10 - 03T 19: 22:38.017 + 02:00 | VMX | I120: IP 192.168.1.4 =
  2011-10 - 03T 19: 22:38.017 + 02:00 | VMX | I120: IP = 192.168.30.1
  2011-10 - 03T 19: 22:38.017 + 02:00 | VMX | I120: IP = 192.168.158.1
  2011-10 - 03T 19: 22:38.017 + 02:00 | VMX | I120: HOSTINFO 1074415970 @ 3331240Hz-> 0 Hz 1000000000
  2011-10 - 03T 19: 22:38.017 + 02:00 | VMX | I120: HOSTINFO ((x * 2518163806) > > 23) + 322527338056
  2011-10 - 03T 19: 22:38.037 + 02:00 | VMX | I120: System uptime 321912074 us
  2011-10 - 03T 19: 22:38.037 + 02:00 | VMX | I120: command line: "C:\Program Files (x 86) \VMware\VMware" "-s" 'vmx.stdio.keep = TRUE' "-#" "product = 1; name = VMware Workstation; version 8.0.0 =; BuildNumber = 471780; licensename = VMware Workstation; licenseversion = + 8.0; ""-@ ""pipe=\\.\pipe\vmxf3ce37cf9b6f9c3e;" "D:\VM\Windows 7 x64\Windows 7 x64.vmx".
  2011-10 - 03T 19: 22:38.037 + 02:00 | VMX | I120: Msg_SetLocaleEx: HostLocale = windows-1252 UserLocale = NULL
  2011-10 - 03T 19: 22:38.056 + 02:00 | VMX | "I120: UI connection on pipes '\\.\pipe\vmxf3ce37cf9b6f9c3e' user (null)".
  2011-10 - 03T 19: 22:38.057 + 02:00 | VMX | I120: VMXVmdb: local connection timeout: 60000 ms.
  2011-10 - 03T 19: 22:38.104 + 02:00 | VMX | I120: VmdbAddConnection: cnxPath = / db/connection / #1 /, cnxIx = 1
  2011-10 - 03T 19: 22:38.105 + 02:00 | VMX | I120: Vix: [6336 mainDispatch.c:483]: VMAutomation: initialize VMAutomation.
  2011-10 - 03T 19: 22:38.105 + 02:00 | VMX | I120: Vix: [6336 mainDispatch.c:780]: VMAutomationOpenListenerSocket() to listen
  2011-10 - 03T 19: 22:38.122 + 02:00 | VMX | I120: Vix: [6336 mainDispatch.c:4067]: VMAutomation_ReportPowerOpFinished: VarEtat = 0, newAppState = 1870, success = 1 additionalError = 0
  2011-10 - 03T 19: 22:38.122 + 02:00 | VMX | I120: Past vmx/execState/val of poweredOff
  2011-10 - 03T 19: 22:38.122 + 02:00 | VMX | I120: Vix: [6336 mainDispatch.c:4067]: VMAutomation_ReportPowerOpFinished: VarEtat = 1, newAppState = 1873, success = 1 additionalError = 0
  2011-10 - 03T 19: 22:38.122 + 02:00 | VMX | I120: Vix: [6336 mainDispatch.c:4067]: VMAutomation_ReportPowerOpFinished: VarEtat = 2, newAppState = 1877, success = 1 additionalError = 0
  2011-10 - 03T 19: 22:38.122 + 02:00 | VMX | I120: Vix: [6336 mainDispatch.c:4067]: VMAutomation_ReportPowerOpFinished: VarEtat = 3, newAppState = 1881, success = 1 additionalError = 0
  2011-10 - 03T 19: 22:38.122 + 02:00 | VMX | I120: VMMon_GetkHzEstimate: calculated 3411189 kHz
  2011-10 - 03T 19: 22:38.123 + 02:00 | VMX | I120: VMMon_RememberkHzEstimate: calculated 3411189 kHz
  2011-10 - 03T 19: 22:38.123 + 02:00 | VMX | I120: TSC kHz estimates: Memoirs of vmmon 3411189, 3411189, osReported 3401000. With the help of 3411189 kHz.
  2011-10 - 03T 19: 22:38.123 + 02:00 | VMX | I120: CPU 0 # TSC = 1100186590922
  2011-10 - 03T 19: 22:38.123 + 02:00 | VMX | I120: CPU # 1 TSC = 1100186590888
  2011-10 - 03T 19: 22:38.123 + 02:00 | VMX | I120: # 2 CPU TSC = 1100186590603
  2011-10 - 03T 19: 22:38.123 + 02:00 | VMX | I120: CPU # 3 TSC = 1100186590637
  2011-10 - 03T 19: 22:38.123 + 02:00 | VMX | I120: CPU # 4 TSC = 1100186590948
  2011-10 - 03T 19: 22:38.123 + 02:00 | VMX | I120: CPU # TSC 5 = 1100186590906
  2011-10 - 03T 19: 22:38.123 + 02:00 | VMX | I120: CPU # 6 TSC = 1100186590898
  2011-10 - 03T 19: 22:38.123 + 02:00 | VMX | I120: CPU # 7 TSC = 1100186590836
  2011-10 - 03T 19: 22:38.123 + 02:00 | VMX | I120: TSC of measured first delta 345
  2011-10 - 03T 19: 22:38.123 + 02:00 | VMX | I120: TSC 387 min Delta
  2011-10 - 03T 19: 22:38.123 + 02:00 | VMX | I120: PTSC: RefClockToPTSC 0 3331240 Hz-> 0 to 3411189000 Hz
  2011-10 - 03T 19: 22:38.123 + 02:00 | VMX | I120: PTSC: RefClockToPTSC ((x * 4294966339) > > 22) +-1100565306901
  2011-10 - 03T 19: 22:38.124 + 02:00 | VMX | I120: PTSC: tscOffset-1100187618517
  2011-10 - 03T 19: 22:38.124 + 02:00 | VMX | I120: PTSC: using TSC
  2011-10 - 03T 19: 22:38.124 + 02:00 | VMX | I120: PTSC: material TSCs are synchronized.
  2011-10 - 03T 19: 22:38.124 + 02:00 | VMX | I120: PTSC: PTSC current = 289960
  2011-10 - 03T 19: 22:38.124 + 02:00 | VMX | I120: Module CPUID initialization failed.
  2011-10 - 03T 19: 22:38.124 + 02:00 | VMX | I120: Vix: [6336 mainDispatch.c:869]: VMAutomation_LateShutdown()
  2011-10 - 03T 19: 22:38.124 + 02:00 | VMX | I120: Vix: [6336 mainDispatch.c:819]: VMAutomationCloseListenerSocket. Close the socket of the receiver.
  2011-10 - 03T 19: 22:38.125 + 02:00 | VMX | I120: VMX VMDB Flushing connections
  2011-10 - 03T 19: 22:38.125 + 02:00 | VMX | "I120: VmdbDbRemoveCnx: remove Cnx Db for ' / db/connection / #1 /"
  2011-10 - 03T 19: 22:38.125 + 02:00 | VMX | I120: VmdbCnxDisconnect: Disconnect: pipe closed for pub cnx ' / db/connection / #1 /' (0)
  2011-10 - 03T 19: 22:38.129 + 02:00 | VMX | W110: Failed to initialize the virtual machine.

  I scored an error... I tried to reinstall, clean... nothing helps.

  Curiously, I can use the Player app to run all VM´s without problem...

  All solutions?

  Thanks in advance

  Marcus4Aspern

  Is - the name change "vmware.exe" with something else?

• Cannot create a virtual machine with a vmdk file copied from another location, please find the attached error

  Hi all

  I copied a file from one place vmdk and try to make a new virtual machine with this vmdk file. But when I turn on after the creation of vm error is coming. Error in the text and the image below

  Power on the virtual machine: cannot open scsi0:0 disc: disc not supported or not valid type 7. Ensure that the disk has been imported.

  See the error of the stack for more details on the cause of this problem.

  Time: 31/03/2015-14:40:05

  Target: DBServer

  vCenter Server: vcsa

  Error stack

  An error was received from the ESX host turning on DBServer VM.

  Unable to start the virtual machine.

  Power DevicePowerOn module has failed.

  Unable to create the virtual SCSI device for scsi0:0, ' / vmfs/volumes/543d140b-feb33d52-7640-90b11c9796c3/vmdk/kapuatdb.vmdk'

  Could not open scsi0:0 disc: disc not supported or not valid type 7. Ensure that the disk has been imported.

  This error message generally if the hard files have been copied hosted as VMware Workstation product, which uses a format of sparse file that is not supported on an ESXi host. Instead of the hard copy, you can use VMware Converter, or - if you prefer - you can convert the hard using vmware-vdiskmanager (before transfer) or vmkfstools (after downloading). I deal to use vmkfstools you will need to load the mutliextent module (see for example "Clone or migration operations involving virtual discs non-VMFS on ESXi fail with an error" vSphere 5.1 Release Notes)

  André

• Cannot start the virtual machine in a HA cluster

  I installed a HA cluster with 2 hosts configured in it.

  I disabled the admission on the cluster control.

  Each host is a Dell Dimension 9150 with 2.8 GHz CPU and 2 GB of memory.

  I created a virtual machine on a host with 1 vCPU and 512 MB memory.

  However when I try to start the virtual machine, I see the task of 'Power on a virtual machine' fail with the status "the host has sufficient memory resources to satisfy the reserve."

  Why this is happening and how do after that?

  You have the minimum RAM required by ESX ESX 4.0.

  Add more RAM to play also some virtual machines.

  André

• Cannot start the virtual machine after you create snapshop

  I found a strange behaviour. I have a Windows 2008 guest that I just copied in my new box ESXi. I am trying to create a snapshot before upgrading the guest to 2012 Windows operating system. The virtual machine has currently no snapshots. Whenever I have create a snapshot, he succeeds, but then I can't start the virtual machine saying that it does not find the vmdk file delta even though I see there in the data store. In order to start the virtual machine, I have to delete the inventory and it readd, but then I lose the snapshot. I also have another computer virtual running Windows 8.1 that does exactly the same thing. How can I create snapshots safely without damaging the virtual machine? I also tried to create the snapshot while the virtual machine has been activated but that makes crashing and then it does not start again, so I have to repeat the process to remove the inventory and it time. Frustrating. See the screenshots, I have attached.

  Once these virtual machines have been in Hyper-V in the past and I just convert to VMware format using the StarWind V2V converter.

  Yes, for an ESXi host and target you must either select the ESX f.vmdk as format target (growable option is for VMware Workstation), or you must convert the virtual machine once more instead of simply upload the files to an ESXi host.

  André

• Stop/start multiple virtual machines with names created automatically

  Hi all

  in my test environment, I want to stop or start multiple virtual machines via the script.

  Their name is always like this:

  'vm-100-qa', 'vm-101-qa","vm-100-qa","vm-102-qa '...

  Now I would like to just stop every VM 'vm-140-QA' to 'vm-160-qa.

  I created a table "$a = 140.160", but I don't know how to implement this in a script 'Shutdown-VMGuest-comments '.... »

  Sorry for this stupid question. I am a beginner absolute powershell.

  Thank you very much in advance,

  Petrie

  You can do something like this

  140..160 | %{   Shutdown-VMGuest -VM "vm-$_-qa"}
  

• Cannot start multiple virtual machines.  Maybe I corrupted the model

  We had problems with disk space, and I was looking around to see if he had left garbage data store.  I am very new to VM, but even though I'm new I'm responsible for helping maintain.  So I learn a lesson the hard way.

  I found a number of virtual machines in organized which did not seem to relate to existing models.  For example, we have a model name 000729-Server2008 Server 2008, that they are in lm401\729.  But it appers to be a clone of 729 to lm401\16.  I'm going to guess that 16 was the original version and changes or clones have been made for him and we are now sitting to 729.

  Then I moved 16 in another data store, but it failed because there is a lock on the hard master.  So I moved everything back.  Now, when we try to start up of VMs driven from this model we get "file & lt; filename not specified & gt; not found"I went back and tried to deploy and supply on the model but I get

  Impossible to deploy virtual machines in the pool of resources 'resgroup-131.

  • Not to feed one or more virtual machines.

  • Error when powering on a virtual machine '2008 X 86'.

  • Cannot power on the operation on a virtual machine
    carried out because one of the files is locked. Consolidation of the
    virtual machine can solve this problem.

  • The operation cannot be performed because a file is locked.

  So I cancelled and tried to consolidate while I get

  Host '172.31.7.111' reported an error. A disk error has occurred: the parent of this virtual disk could not be opened. Host '172.31.7.111' reported an error. A disk error has occurred: the parent of this virtual disk could not be opened.

  Can someone help me?

  This article may help: http://www.vmware.com/kb/1007969

  If you have found this helpful at all prices please points using the correct or useful!  Thank you!

• Cannot start the virtual machine guest after receiving "License expired message" host ESXi 5.5

  I can't start computer virtual invited after receiving "License expired message" 5.5 ESXi host. I am able to copy the vm folder prompted with all its files using WinSCP I had already installed on a desktop computer in the network.

  However, it takes an extremely long time to download the VM [2.5 mb/s], which is of course a different question.

  It seems that I was still on the trial with my vsphere client license, until it expired. I am able to view the virtual machine within the workstation 10, but I can't turn it on. It says "Please install a license to power on this computer" there is no way to install a license anywhere.

  My question is... .will I be able to access this virtual machine if I download on an external hard drive, then add it to 10 VMWorkstation that I possess a current valid license?

  Even if the evaluation license has expired, you should be able to connect to the ESXi host using the vSphere Client and follow the steps mentioned in the article that I posted before you enter the free license key.

  André

• VMWarer Image cannot start the Virtual Machine in Windows 7

  Hello

  Receive a machine with disc encryption HARD full of checkpoint on it. I had successfully converted to a virtual machine Image, unfortunately every time tried to start gives me BSOD.

  Tried to fix it, tried to return to the image, but the same results.

  There were no errors during the conversion. complete cleaning.

  Someone at - it suggestions?

  How did you convert the image in a virtual machine?
  have you changed the type of Adapter LSI - SAS during conversion?

• Cannot start a virtual machine from an ISO stored on the NFS share

  We have an NFS share on our Windows 2003 server to serve the ISOs for virtual machines

  However if we have attached an ISO to a virtual machine and configured to boot from it, it does not find the ISO, just attempts to boot from the network, but if copy us the ISO in a data store local it will start and install correctly.

  We set the NFS share for anonymous access on Windows Server, we tried with both read and write permissions, but still no luck

  Anyone can get an idea about this

  Thank you

  Kimble

  ESXi must connect to the NFS share with the root account.  You will have to map the root login to an account on the Windows Server.   You can see a sample of the instructions here - http://www.sohoadvisers.com/tutorials/vmware-esxi/connect-esxi-to-windows-nfs.

  Dave

  VMware communities user moderator

  Now available - vSphere Quick Start Guide

  You have a system or a PCI with VMDirectPath?  Submit your specifications to Officieux VMDirectPath HCL.

• ESX 4.0 - cannot start a virtual machine?

  I have recently install ESX 4.0 evalution in mode. We stopped for the licenses of our distributor who will take 3 to 4 days.

  ESX 4 installs successfully on DL 360 G5 and I use 30 MSA with 7 discs (1.6 to total) as a storage device. It detects the local drives and 1.6 to datastore perfectly. But when I create a simple virtual machine and start reading the BONES of CD ROM it does not start. Is it because I use eval mode. I think ESX 4 is fully functional and active for 60 days. When I start the virtual computer it concludes with the message "Operating System not found" and not even boot from the CD ROM After two or three configurations of chaning of VM, I'm still not able to understand. Can someone tell me where I am doing wrong. In ESX 3.5, I ran the virtual machine correctly but in ESX 4, I'm not sure. This is a new server and ESX 4.0 is also new facility. I also appreciate if someone tells me a guide that shows step by step how to create a virtual ESX simple machine. I have not yet install VC 4 as I have not yet received the licenses.

  Thanks in advance

  Please check the following things

  1, "to connect to the power on ' should be checked for the CDROM in editing parameters

  2, Goto VM BIOS and check if the CDROM is the first boot device.

  3, check the CD-ROM drive to start a physical machine

  4, check if you connect the CD-ROM drive to a remote location.

• Start the virtual machine with LaunchAgent

  I've got following launchctl below .plist file. When I load, I get output using vmrun. Someone knows what's the problem? Anyone done this?

  Here is an example of work on my system at: /Users/WKZ/Library/LaunchAgents/com.vmrun.test.plist

  
  
  
  
       Disabled
       
       Label
       com.vmrun.test
       ProgramArguments
       
            /Library/Application Support/VMware Fusion/vmrun
            -T
            fusion
            start
            /Users/WKZ/Documents/Virtual Machines.localized/DSL1.vmwarevm
       
       QueueDirectories
       
       RunAtLoad
       
       WatchPaths