Cannot start Acer aspire V3 - 571G "scan and repair drive (E): 27%.
Hello! I have an Acer aspire V3 - 571G. But I have a problem now, when I boot, the screen with the Acer logo appears, with the message: "Analysis and repair Drive (E): 27% Complete" and it never moves from 27 percent. So I unplugged the computer sometimes and sometimes a message asking me to restore to an earlier version. Once I tried to restore, a screen with the Acer logo appears. Before I restarted the computer and had this problem, I downloaded a scanning software from disk on the Ookla Speedtest site, but since he cannot solve all the problems, I downloaded another similar software by AVG Netherlands BV and fixed all the problems. Then they said that I needed to fix something in the Device Manager (3 of my miniports were not work) so I looked on the net for a solution, that I followed and uninstalled all 3 miniports. After the AVG scan, it asked me to restart, which I did later and could not get more in Windows. Any help would be appreciated. Thank you.
I finally solved this problem! After starting, press F9, and then click "restore." Then you will need to be patient and start the computer normally will be! Here it helps other people with this problem too.
While I was with my laptop, it restarted abruptly. At the start, he started C scanning and repair drive. Since then on my PC was extremely slow. Control Panel, internet browsers to hang on their opening. Sometimes, the PC restarts, showing KERNEL_DATA_INPAGE_ERROR.
Your advice in this regard would be highly appreciated.
Try this registry manipulation to avoid to analyze and repair at startup, see if that helps:
Hope this helps, good luck :)
A few days at a cold start I get the message ' analysis and repair drive (f :)) 100% full) ' the circle of treatment still works, but I never have to connect, just stuck! I don't have a power of strength off the coast, then restart. This last time I had to use F8 at the beginning, but the repair was not successful. I could help to fix this Windows 8 Pro.
On the reference to the command chkdsk 100% stuck, what can I do? the process runs for 12 hours continuously. must cancel or there are problems
I got an ACER Aspire V3 - 571G recently my sometimes key in my habit of working laptop keyboard and sometimes I press the keys combinenation give (Q and not work w & m), me 3 or # .i wonder what an antivirus program or my hardware problem scince I check my device is up to date, I don't know what's wrong with it.hope can give me the answer and solution thanks a lot. Replay ASAP
Hi Panjlia,Thanks for the reply.Please check if you have followed the instructions mentioned in the previous post.See the article:Mouse, touchpad and keyboard with Windows problemsLet us know the result. If the problem is still not fixed, we will be happy to help you further.
And if the answer is Yes, then the warranty service would free it will affect my warranty? In addition, should what kind of RAM I look for if I want to upgrade? Aries will be added to the existing RAM and it will replace it?
I'm sorry for so many questions, my English and my ignorance when it comes to upgrading a laptop. And is all what I should know about upgrading RAM as it might damage the data on my disk, etc. ?
I still have the warranty and the stamp is still there.
- Intel Core i5-5200U 2.20 GHz
- NVIDIA GeForce dedicated 820 m with 2 GB of VRAM
- HARD DRIVE 500 GB
- 4GB DDR3 Memory (RAM) L
- Windows 10 Pro (i think)
I know not if Acer will modernize under warranty, you must remove the motherboard to increase the RAM, the installation of CPU - Z to find out the exact your RAM specifications, then buy with timing and characteristics and to update yourself, if you are not sure to dismantle get performed by a technician on site, you can find the cost of this upgrade for your support of Acer local as they can do for one, compare prices with the quote from your local technician.
You will lose all the data from your hard drive because of the upgrade of RAM but I tell reflect you to back up the entire system on an external hard drive using Macrium or similar utility.
This is to show you how to upgrade and what is at stake:https://www.youtube.com/watch?v=rmsFDi_qsnQ
This is just one example to show how to find the upgrade for your laptop and you don't need to buy Crucial memory, any brand works as long as they match the same characteristics as your current RAM.
I have an acer aspire V3 - 571G, unfortunately, I lost my hard = active operating system disc
I found a way to get the serial number of the bios, but I need to know the version of operating system, I installed windows 8 pro but he would not accept the activation code... so can you please help me?
If this isn't Pro, he is very probably Windows 8 (Core). This is the standard edition of windows 8 and is called only (Basic) to distinguish it from the OS itself.
UPDATE: after checking on support.acer.com, it's appears the newest operating system for your computer is: 8.1 Windows 64-bit
I can get a good deal on a laptop Acer Aspire E5 - 571G - 59 CT.
However, there is a downside. They keyboard is in German. I think that the German layout is QWERTZ?
in any case, I want to know if it is possible to replace the keyboard with a keyboard with a United-States-layout (QWERTY).
I noticed several online shops offer keyboards, but I'd rather be safe on this fact.
I can find keyboards, with provision of the United States, for Acer Aspire E5 - 571 G '-part, but not for the TC model 59. Does it matter? I think that the last part is reserved for configuration, right? If anyone can confirm this?
So far, thanks for responding. Very much appreciated.
Yes, the last characters are the configuration for this country (Germany).
You actually have this keyboard:
NK. I171S.00D KEYBOARD (GERMAN) NK. I1713.05P KEYBD.104K.BLACK.GERMAN
You will need these U.S. keyboard:
NK. I1713.066 KEYBD. US - INT.103KS BLK NK. I171S.00W KEYBD.103K.BLACK.US - INT.WIN8
Original title: cssauth.exe instance cannot start, help and Support of file disable
Whenever I connect to my windows XP, it still says cssauth.exe instance cannot start due to an initialization error and I could not open my file help and suppot. Please help me. Thank you before
1 how long have you been faced with this problem?
2. don't you make changes on the computer before this problem?
3. What is the brand and model of the computer?
4. who help and support files are you referring to?
5. what exactly happens when you try to open it? You get the error message?
cssauth.exe is related to the Client Security Solution.
Step 1: Try disabling startup cssauth.exe in the configuration of the system.
1. click on start > run.
2. type msconfig and press ENTER.
3. click on the Startup tab.
4 locate cssauth.exe, and clear the check box for this.
5 restart the computer and check for the issue.
Step 2: If you still get the same error at startup then perform the clean boot on the computer.
From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".
How to configure Windows XP to start in a "clean boot" State
When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
1. click on start and then click Run.
2. type msconfig and click OK.
The System Configuration Utility dialog box appears.
3. click on the tab general, click Normal Startup - load all services and device drivers and then click OK.
4. When prompted, click on restart to restart the computer.
I would also ask you to contact the manufacturer of the computer because the problem is with the client security software that is provided by them.
I have an acer aspire 5920 on vista and can't connect any printer to it... error message 0 x 00000002 comes up... all clues?
1 are there any changes or updates made on the computer before the show?
2. you try to add a network printer?
3. What is the full and exact error message?
4. when exactly you get the error message?
5. What is the number of brand and model of the printer you are trying to connect?
I suggest you check out the link and try sharing the printer:
Share a printer
Network printer problems
Check out the links and check if that helps:
File and printer sharing: frequently asked questions
Troubleshoot file and printer sharing
Whenever I try to start my computer, I get the message that it is scanning and repair (L :) and it takes about a full day to get 10% complete.) Then I leave at night and when I wake, there a screen empty or it has restarted the scan at 0%. I tried turning works again, but it will scan screen or it is just empty. This has happened for days now and I am at a loss of what to do next.
When you get a new drive, understand that you CAN install Win10 on it, even if your PC came with Win10, because it is already registered with Ms. Just be sure to SKIP the part where it asks for a product key.
My laptop was to start due to a hard drive problem. During the restart, the laptop was apparently scanning and repair itself, but it got stuck at 100%. So I have to stop. This has happened several times, and finally I decided to update the laptop. It was fine for a few months, and then it happens again. Should what is the problem with the computer and what can do/what I do?
Thanks in advance :)
No doubt the HARD drive is defective and must be replaced.
You should know that a HARD disk is part no reusable who was going to die sooner or later.
In my case, the HARD drive died twice within 5 years of the use of the laptop.
Now, I m using a SSD drive. I would recommend you replace it with a good SSD drive as this would considerably improve the performance of your laptop.
Yes I've seen questions on this subject, but it's a little different.
I have a laptop HP Envy m6 on Windows 8. He told me before the update to 8.1, I install the updates of Windows 8 remaining. Tried to install, but I get 8000ffff error code. I went in cmd and do the chkdsk command and restarted my laptop. It gets stuck on 27% when it is scanning and repair. Skip the process works, but it just ends up being a black screen instead of take me to the login screen. I tried the Safe Mode with network and still the same problem. All the patches?
Thanks for posting your query on the Microsoft Community.
According to the description, I understand that you are facing problems with your computer of Windows 8 is it stuck at 27% when scanning and the repair process.
This could occur due to system conflicts.
I suggest you refer to the suggestions provided by Rajesh Govind replied on 21 March 2013 and check if this is useful.
I hope this helps. Please let us know the results. We will be happy to help you further.
Everyone says that 'analysis and repair disk (c :))' on Windows 8 portable computers means it has not been closed correctly. I have a laptop Asus X501A which of course has Windows 8. When I stopped it, I always stopped him properly, as you're supposed to do. However, earlier this morning, when I logged on what he was doing "scan and repair the disk (c :)). I didn't know what it meant at the time, so I looked on my phone what it meant, and he said it means that always happens due to a bad stop. I thought to myself "How does this affect me? I always turn off my laptop properly. "So I looked for other causes of it, and only it was major changes to a laptop. Since I got this laptop, I did not really have major changes, so I thought it was strange. When you "scan and repair the disk (c :)) ', he got stuck on 35% completed for a long time, until he went to 100% full and restarted my laptop.
Why my laptop have analyze and repair my drive (C :)?
Please see after correction upward to solve this problem:
Hope this helps, good luck :)
I have a brand new Acer Aspire One Netbook. It is brand new, so after I did the initial installation for the new netbook, Windows 7 is an update. When the update is complete, it blocks my netbook. I get a black screen and a cursor only. The only way I can fix it is to restore back to the factory and start all over again. Anyone know why this is happening or that updates 62 is the cause? I basically can't update my OS until it is fixed or know where it is and it can check the updated list.
You say you have 62 updates. The only true way to know what update is the cause of the problem is by installing one at a time.
I was looking especially the optional updates as shows drivers etc. If you are offered drivers, you should consult the manufacturer's website to see if indeed you really need the updated drivers.
TaurArian [MVP] 2005-2011 - Update Services
I have an Acer Aspire One D257. It has no built in DVD / Draw. It came pre-installed with "windows 7 starter" I don't have a disc of recovery etc for this program. Last year I used widows any time upgrade to install "windows 7 Home premium upgrade," which has been installed via the internet by a Microsoft technician. Then I had the upgrade key sent to me by e-mail, what's left. Later, I had problems with the computer and decided to windows 7 from re - stall. I visited the Microsoft site and downloaded the program on a USB Home premium windows 7 (32-bit). I have this installed successfully in the D257 of Acer. But I was unable to activate with my key upgrade Windows 7 Home premium, for some reason any he does not accept it? So now that I have a dilemma, I have a key that has cost about £76,00 for the upgrade that seems unnecessary. Also, I am unable to revert to the original "windows 7 starter", as the system restore will allow me only to come back to a point in time that is after I installed windows 7 about 2 weeks ago. How can I fix this without having to buy another program again. P.S. I use an external DVD draw if I need. Can anyone help please.
Original title: bobgoodman1706
Hi thanks for the info. Unfortunately, the recovery was wiped out when I installed the new windows 7. However, I have now solved the problem by buying a new product key that has been a success so now have windows 7 home premium installed and fully active. Thanks to everyone who tried to help me.
Maybe you are looking for
came to turn on my laptop this morning at a black screen after you turn on the laptop and a bunch of times, I noticed there were 2 low beeps coming from the motherboard (thought it was the hard drive, it comes to the right side of the laptop / to the
Hi, one of my users reports a very unusual problem with its Tecra M2. The keyboard seems to work only if you press a vowel key and the display shows then this vowel, but with an accent above it. For example, when you press "A" key, a is produced, if
I'm having a problem with Tablet HP flow 8 of my wife. When you turn it on the start screen for normal window with the date and time is displayed first. Then I slide the screen up to expose the login screen. Now, she uses a 4-digit code to connect in
Hello! Im just a student in biomedical engineering and I need to detect the rate of breathing on labview based on accelerometer three axes, I m using the z axis accelerometer for movements of the chest and thorax breathing, but I do not see the signa
Hey,. I'm looking for a new helmet for my sansa fuze. If there is someone who can help me with this do it please. I found a page on amazon.com Here is the link to this page: http://www.Amazon.com/s/ref=nb_ss_e_0_9?URL=search-alias%3Delectronics&field