Cannot start addon because there is no longer the 'Tools' menu
I can't launch addon because there is no longer the 'Tools' menu. Is there a solution?
Press Alt and the menu bar will appear temporarily. Then click on tools.
Or open customize and use show/hide toolbars, and then click menu bar to show all the time.
Tags: Firefox
Similar Questions
-
Cannot start down because there is no set storage location.
Hello world
I am facing a strange problem. I use the latest version of FCPX (10.2.3) and Mac OSX (El Capitan 10.11.4) and have never had this problem before. It happened right in the middle of a project after FCPX froze import. I have an external hard drive with 445 GB of available space. I trashed my preferences without result.
After you click it on OK, I get this question with the clip are accessible only through the SD card and not ingested as you can see below:
Any help would be greatly appreciated.
None of the images do not appear in your message. You can use the camera button in response to add the images to your computer in the forum.
-
cannot be synced because there is not enough free space to hold all the items in iTunes (required additional 194.8 MB) library.
It is not supposed to because I have enough memory on my iPad.
Help, please
ckucharek wrote:
It is not supposed to because I have enough memory on my iPad.
Not based on what? You have not provided any information as to the amount of space you have left and what is the total capacity of your iPad. He must leave a certain percentage of the free capacity at all times, so if you have a 32GB device and you are up to 2 GB of free storage, which could in fact be severed close... If it says you need to 194.8 MG of free space that would be in addition to the amount that you see as free space.
It also depends on what you're trying to sync on iTunes as well. What content, apps, songs, etc.
So... can provide you more details?
-
iPod cannot be synced because there is not enough space
I just got a new computer and I tried and tried to sync my ipod touch, product type is: Ipod 3.1. and iOS 5.1.1. on the new computer. I have all the songs from the old computer and their transfer to the new computer, but I get the error message "Ipod cannot be synced because there is not enough space to hold all of the items in the itunes library (like 55.88 GB required). This computer now has a lot of hard drive to contain this music, and my ipod has a capacity of 57,92. Now, if I think right, it's almost an ipod everything! I'm so confused by the present. I have not added a lot more music. Please explain and help me understand what I need to do to get my ipod to sync. I tried to reduce the bit rate only to get the error saying that I need extra GB 38.65. What happens here? Help, please.
Now, if I am not mistaken, the songs that you have in the itunes application, is what gets synchronized, I have additional music in other folders, but I don't have them uploaded to the app. Are they still in the library? Please help me not to be confused on this issue. I greatly appreciate it.
Thanks for any help you can give me.
Steve
You try to synchronize too much media to iPod.
Verify that synchronization of the settings
iTunes: synchronization of multimedia content for iPod and iOS devices
Try the synchronization using the manual method
Managing content manually on iPhone, iPad and iPod
You can synchronize only with a computer. To move computers
Synchronization to a 'New' computer or replacing a hard drive "crashed": Apple Support communities
If all the media synchronized music and apps are already in the iTunes library of the new just backup on iTunes computer and restore from this backup.
iOS: backup and restore your device iOS with iCloud or iTunes
-
I have a couple of server 08 R2 machines where the P to V conversion fails. I did some research and the problem seems to be related to the system reserved Partition that has 0% available 100 MB free space. Conversion fails with the error below.
VSS snapshots cannot be stored because there is not enough space on the source volumes or because the source computer has not all NTFS volumes. Error code:
2147754783 (0x8004231F).Someone had this problem and came to the top with a solution or to get around?
Thanks in advance
Guessed it. My snapshots Appassure did not also exist with a similar error, so that's what I did to solve it. My servers now converted without any problem.
- Open disk management.
- Look at the partition of the PRS and see if it is 100% full.
- If Yes, proceed to step 3.
- If this is not the case, check if there are readers who have no more of 300 MB free (minimum requirement to use VSS).
- Click a drive, select properties and then select the instant snapshots tab.
- Ensure that all shadow copies are disabled and no limit on all players.
- Go to the partition of the SRP and assign the B:drive letter.
- Open the B: drive via disk management, and then locate the folder System Volume Information. Note: if necessary, change the folder options so that you can view hidden files, folders and drives.
- Right-click the System Volume Information folder, and then select Properties.
- On the Security tab, click Edit, and then add the group with full control everyone in the folder.
- Open the System Volume Information folder (you should see log files are full), open a running as an administrator command prompt and then type the following commands to unload the filter driver.
- B:
- B:\>FLTMC UNLOAD AAFSFLT
- Navigate to the System Volume Information folder, and then type the following commands:
- B:\>CD System Volume Information
- B:\System Volume Information > AALOG_ DEL * (this will remove all of the log files, and then re-create a new)
- B:\System Volume Information > CD\
- B:\>FLTMC LOAD AAFSFLT
- Close the command prompt window.
- In Windows, right click on the reserve system folder and remove the Group everyone.
- In Disk Manager, remove the B: drive (and click Yes when prompted with a warning window).
-
Error: Location cannot be deleted because there are users assigned to it!
We have created two new applications of FDM, and after adding of new sites that we would like to remove the default 'CONTROLSREVIEW' control examination and location of "SAMPLE". However, we do experience the following error message when you try to do:
"Error: location cannot be deleted because there are users assigned to it!
(There is however a thread similar to remove a location ):
-The only information administration | Maintenance by the user for each user is the user name and security. Users cannot do not have places here from what we can see.
-When you look at the analysis > reports > reports on the security > list user - level, no report appears and the page is blank. The drop-down lists are empty).
Details:
-11.1.2.1.
-Point of view has been updated with our new location
Please indicate how we can solve this problem. Thank you very much!You must double-click the user in maintenance by the user. This will open a new window where the assignment of location information is stored. Change the default location for users to review something else controls and save the changes. Once you did it for all users, you will be able to remove the location
-
Cannot start Windows, Windows Setup does not detect the hard disk, Bootmgr is misiing
I have a few problems on my laptop [Acer 3810 t]
-The first problem
My mobile give me screen "cannot start windows' who have 2 choices: run the Startup Repair tool and boot normally. I chose to fix it, but nothing happens and stuck "starting windows" and gives unmountable boot volume 'blue screen '. the Dungeon of blues screen appear (for laptop is a not restart). So I turned off my phone and turn it back on it. the "could not start" screen again and I chose to start normally. but the result is negative. My portable Dungeon cannot start windows. Because of that I am using the advanced boot option and choose all the boot type such asit cannot load the safemode, last configuration etc, but the result is the same, you cannot start windows. in safe mode, its stuck in loading fileinfo.sys. I do not give up to try again with the advanced boot option. until I have a bad situation. My laptop can only 1 file in safe mode and blues screen do not appear again (my laptop only return at the beginning of start or restart)-The second problem
because it cant solved, I want to reinstall my laptop. My OS is Vista 32 bit (pre-installed). I want to install the new operating system, windows 7. I use Dsik Flash bootable USB to install Windows 7. But in the BIOS, it is detected as a USB HDD. So I set my BIOS to load USB HDD to the first order. the installation can be done, but only until the "start Setup" screen and its deadlock. I have it wait up to an hour, but nothing happens. So I'm going to BIOS, change SATA mode to IDE mode AHCI. Then load the USB and go "installation program start screen. but the new problem is the installation of window does not detect my hard drive. So I can not choose the place to install the operating system. I have to load the driver, but I did not. Again to load the configuration to AHCI and IDE, until I get my HDD can detected in IDE mode. So I think I can move easily, I choose custom installation and choose the hard drive to install the operating system. But unfortunately, at the beginning of the process, after choosing the OS, the Installer gives error if installation location the installation failed. (I forgot the error message)-The third problem
So far, I can't spend 'startup begins' as well in mode IDE and AHCI. Also bootmgr in my hard disk is missing, so I can't go to move the startup repair or the startup option in my HDD as beforeWhat is the error code that you got with blue screen?
I think that there is a problem with your drive HARD check that by contacting acer...
-
The operation cannot be completed because you do not have the necessary permissions.
The operation cannot be completed because you do not have the necessary permissions. This is the message I get when I want to create a new folder. I don't have this problem until recently. 1.
How should I do?
2 is that there is a security breach?
I use sierra but, I had the same problem with el Capitan
When you try to create a new folder? is it an external device? your office? a NAS?
-
A friend gave me your laptop to watch - there edition family vista (64 bit (I think) on it and when you try to run Explorer he says it does not find or access is denied and something about 16 bit / 64 bit (it has been a few days and I'm not memory clearly until what I try again tonight)
"\?? \C:\Windows\Explorer.exe"cannot start or run due to incompatibility with the 64 bit version of windows"
If you try to run a dll / Panel or anything like that, you will get an error message saying that it cannot run some 16-bit process or access denied.
I did a lot of research on Google and nothing someone he said worked - which "everyone" giving full access to the C:\WINDOWS\Registration, executes a command secedit, a sfc/scannow, do a system restore to the point of older, make a new user account, start up in safe mode...
So now I'm pretty stuck. I'm SURE I've seen this problem before with reference to 16-bit etc error messages, but in home edition I do not have the MMC users & groups (had to make new user with password renew then that starts in another environment) or the Security tab of the properties of file/folder for permissions NTFS etc (had to use icacls).
Can someone enlighten us justice on that shiney? : o I don't want to have to redo the entire Setup, I'm sure it is something fixable...
OK, so for those who want to know the real difficulty? --He came from a guy on the forums of TekTips
goombawaho (MIS) 5-13 dec 08:05Before charging, tell him from a prompt CMD (Administrator).
Go in the the C:/windows/system32 folder and type "Rename verclsid.exe verclsid.old.
resetI guess that I didn't that I had seen the name "verclsid.exe" in some of these error messages trying to run things. I looked and saw it was to check the files or something.
Anyway I couldn't rename even in admin console so I started in a different environment and renamed the copy in system32 and syswow64.
Now, I've started and bang things seem to be ok! I guess I should try and replace it with a known working version? That or just give back it.
I doubt that everybody does all c:\windows control total should be too dangerous, right... just? : P I don't have a way to put permissions by default anyway, so Hey. Formatting beats!Now why everyone here didn't it? I knew it would be simple! : p
-
I used to be able to watch VIDEO (including the .avi) files in the preview pane in windows Explorer, but it has since stopped working. This change took place after the update to the latest version on windows media player. (version 12.0.7601.18150)
attempted fixes:
1. in options from files of the variations of tab - all reviews of checking / unchecking "always show icons, never thumbnails" and "show previewhandlers in the preview pane. the first has nothing to do with this problem. However, the 'show previewhandlers... '. "when checked this error message is displayed in the preview pane" "this file cannot be previewed because of an error in the windows media player rich preview Manager." When unchecked the poster preview pane a thumbnail with the icon of the program it is supposed to open, in the present case, WMP, this correction allows the preview of the PHOTO but NOT of VIDEO. " also I reset by default, of course.
2. they also examined the options under system settings panel-advanced control and troubleshooting without success.all the less someone ' one can confirm that there is a problem with windows media player? or it comes from windows Explorer?
UPDATE:
https://www.YouTube.com/watch?v=xBgrJ3XO-Z8This shows that the problem is with WMPRPH.exe (Windows Media Player Rich Preview Handler) it happens when wmprph farm, now if someone knows how to impose this program to continue to work as it should which would solve my problem.
-
I tried to pair my new Motorola SF600 bluetooth stereo headset so I could listen to and control Windows Media Player with my helmet. When I matched the device with the Microsoft Bluetooth driver has been installed, the service of the helmet was not available and troubleshoot message recommended that I upgrade to the Broadcom Widcomm driver. I followed all the instructions, downloaded the latest Widcomm driver and installed. Then I restarted the computer. I could see the Bluetooth icon in the taskbar, but it was red and not white (or blue). When I clicked it, it just says adapter lights up, I did. As soon as I hit this button, the bluetooth icon disappears and no bluetooth connection is possible. When I look in the bluetooth properties and the properties of the driver, I see the message "device cannot start (10). I searched all over the web a possible solution and the closest thing, I found was a fix article talking about a fix for bluetooth adapters that cannot start. I asked the fix and tried to apply it, but whenever I try to run it, it gives the message that it is not applicable to my computer. I wish you a few recommendations for how to fix this. Please let me know if you need more information about the devices or anything else. Bluetooth dongle is a mini Logitech BT which came bundled with the combo keyboard and mouse MX-5000. He is old enough, but he gave me always excellent service under Windows XP.
Thank you.
Dan
Original title: Win7 won't let dongle BT start with the latest Broadcom Widcomm driver
Thanks for the advice, but I came to the conclusion that Windows 7 does not support the advanced features of this particular Logitech Bluetooth adapter. Windows XP takes to load them entirely, but for some reason any Windows 7 isn't. From Logitech Web site States expressly that the Bluetooth adapter supplied with my keyboard and mouse will not support anything other than a mouse and a keyboard, which is unfortunate. I don't know why, but there you have it. I'm giving up now.
-
Cannot start Acrobat DC. Could not receive the confirmation e-mail. How can be changed the e-mail address?
Hello
The following link will guide you on how to change your email address associated with your Adobe ID
Change the e-mail address associated with Adobe ID.
Please follow the steps and let us know how it goes.
Concerning
Sukrit diallo
-
I want to import Windows Live 2011 messages, contacts, etc and tried to install the recommended add on. I downloaded and registered the add on by following the instructions, but when I went on the Tools menu, to add on the of are not there to complete the installation.
Add what ons reports tools when you use the menu bar. Shortcuts universal to display hidden menu bars is alt or F10
It looks like you use the button AppMenu (3 horizontal lines).
I guess that you haven't noticed the Add-ons selection in the main menu when you have clicked on that. -
Cannot start windows because of user on login screen password
original title: vista boot
Ideas: could not start windows because of user on login screen password
- You have problems with programs
- Error messages
- Recent changes to your computer
- What you have already tried to solve the problem
> Could not start windows because of user on login screen password
This information is barely enough to give you a decent answer half.
If you can't sign in because you forgot your password...
We are not allowed to help users to bypass the password protection, regardless of what are "reasons".
Here is the Microsoft Policy link to this topic: politics of Microsoftif you have entered the password, and you have still not able to get, so what was the error message?
You receive the error message? .......
The user profile Service has not logon. User profile cannot be loaded
Shut down your computer > turn it back on and immediately and repeatedly tab key F8 until you see a black and white screen. The top/down arrow and selectSafe Mode with network.In the window of logon in safe mode...
1 can connect to your account administrator in safe mode?
If so, run the Microsoft tutorial support listed below.2. If you can't log into your own account, you see another admin next to your account in the logon screen?
If you do, that one is the built-in Administrator account. By default, there is no password. Opening of session and run the tutorial from Microsoft technical support below.3. If you are able to log on in safe mode, do a system restore. Choose a date when you were able to log in NORMAL MODE as your restore point.
How to do system restore: tutorial system restoretutorial from Microsoft support :
http://support.Microsoft.com/kb/947215
There are several methods,go through one by one.
Method 3 has a "fix it for me" applicationFor the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.
-
I want to reset my security questions. I know that my apple ID and password. I tried to make a purchase, and he asked me questions. As I remembered them I went to julien inconu try to reset but it said that I could not reset my questions because there was not enough information. No alternative has been given. Help!
Follow the instructions exactly as you see here > If you forgot your Apple ID - Apple Support security questions answered
Don't forget to write your answers safety and store it somewhere safe.
Maybe you are looking for
-
App store showing iTunes store instead
Hello So I went recently to update one of the apps on my Mac, I clicked on the App Store, but when I go there it continues to show that the iTunes store or some parts of it just come up completely blank. I added a few screenshots on what each party s
-
Palm Tungsten E2 desktop download for Windows 10
I have a new PC with Windows 10. I need your help to find and install the appropriate software so that I can synchorinise with my PalmOne Tungsten E2 and to be able to access the info on my PC too. I would also ask please indication of any installati
-
Is it possible to increase the memory on iPad 2? Probably an external device?
Is it possible to increase the memory on my iPad2, without having to buy a new iPad?
-
I forgot my login password
-
Error on startup: "Could not access the local server", Windows Vista.
When I start my Windows Vista laptop, I get this error. This computer is connected to a wireless home network. We believe that this error may also have an impact on the performance of the computer as some websites are not accessible as well as some