Cannot start by Satellite L850 - no boot device - please reboot

Similar Questions

• Re: Satellite L850 - starting with "no boot device - please reboot"

  I tried to correct this L850 - portable 1LK which keeps crashing and so on. But while going through the options in advance in the troubleshooting section (Windows 8). I tried, I think its called Toshiba Recovery tool and click on the option to erase data, assuming that he would remove all corrupted data, so I could reinstall from factory settings.

  But now when I boot it just says "no boot device - please reboot" and when I restart it does the same thing. I tried to open the recovery partition, but there are a lot of different buttons that supposedly bring it I don't know if I support on the right. Any help?

  On this virtual path, it is not easy to say what the problem is here. In my opinion, you should try to reinstall recovery image once more.
  For assistance with this please check http://aps2.toshiba-tro.de/kb0/TSB2A03ES0000R01.htm

• Satellite L50 - B - "no boot device - please reboot your system.

  This laptop does not start, it gives just the message "no boot device - please reboot your system.

  It looks like the partition table has disappeared.

  There is no support of recovery, no recovery partition, I can access it on the hard drive and no Windows key.

  How can I install windows on it?

  L50 - B PSKTNA-02R016 satellite

  Have tried to start while holding down the 0 key, but no luck.

  This computer is TWO DAYS OLD!

  According to specifications of the laptop, this machine was delivered with pre-installed Win8.1. Yes, there is no recovery media. For years, Toshiba and many other laptop manufacturers offer laptops without disk installation, but original recovery image is saved on the HARD drive, so if everything is OK you can start installation of recovery of the HARD disk image or create a recovery media that you can use for installing the OS.

  If you get your laptop work again thanks to create this media. How this is described in the document s user manuals.

  Recovery partition cannot disappear from the only one. to be honest, it's not clear to me what happens exactly with your laptop.

  Start your machine and press F12 to get into the boot menu. There you should find option enter the configuration. Using this option, you will be able to enter the BIOS settings. Please check if the HARD drive is listed and recognized correctly. by default the BIOS settings and restart your laptop. What happens when you do this?

• Satellite L850D - 12 p - no boot device - please reboot

  I hope someone can help

  I have the laptop above and I turned it on to get this error

  + "No boot device - please reboot ' +.

  But was OK yesterday
  It doesn't let me in Bios at all. As soon as I turn it on I get this message instantly
  I tried a new hard drive in the laptop, but still the same error

  Hello

  > I tried a new hard drive in the laptop, but still the same error

  The laptop computer was preinstalled with the Win 8 System.
  The laptop BIOS UEFI s takes the mode and secure boot.
  This means that if the secure boot and UEFI is enabled, the laptop is unable to start the external device or wouldn't boot to other systems such as Windows 7 or Linux.

  To install another system, you must change the mode MSC UEFI boot mode and have disable secure boot option.

  To access the BIOS, you must press the F2 key immediately after the laptop has been powered.

• Satellite L50D-B - no boot device - please reboot

  Does anyone know what to do when you get only bios saying "no boot device - please reboot" during computer startup?

  Enter your BIOS, make sure that UEFI is enabled, or if you are using a linux operating system allow inheritance.

• Satellite L50D - no boot device please don't restart

  Hello

  I'm trying to fix my parents laptop: it's a Satellite L50D-B - 14 p. It shows the error "No. Bootable Device please restart System" at startup. So far, I tried disabling "secure boot" and by replacing the boot mode 'boot CSM', without success.

  I can see in the settings of the BIOS that the HARD drive is still recognized, is not dead. I don't have the installation diskettes.

  Any advice on what to try next would be greatly appreciated.

  Thank you.

  Any ideas on how I can proceed?

  Is the fact that the HARD drive can still be seen in the BIOS, means that it is not dead? At the MS DOS command prompt, I typed in C: and it found nothing - it gives me to think that the hard drive may indeed be dead?

  I also ran a program of removal of data from a bootable CD. He managed to acknowledge that the HARD drive has existed and acknowledged that he had 932 GB. However, it said 0 bytes were free (which is odd).

  Any ideas would be appreciated.

  Thank you.

• My laptop isn't just saying no boot device - please reboot the system.

  Please please please help me I can't do anything with my laptop, I pressed the power button, but the same message appears every time and I don't know what to do I tried pressing a button or two on the keyboard, but the message came under a just and repeated that the system I have is an INDIVIDUAL C855D TOSHIBA - 13N and it has windows 8. I desperately need to get up and running works correctly in as soon as possible I am in major panic like don't know what to do.

  I also want to thank you for the advice given earlier I take note of it that were unable to try anything, but I appreciate the input considerably.

  Hi LindseyMarsh,

  Thanks for posting the request in the Microsoft community!
  I understand that the computer Toshiba laptop says "no boot system reboot device please. Try the suggestions and check if it helps to resolve the issue.

  Method 1:
  You can try to repair the computer:

  (a) starting from the DVD of Windows 8.

  (b) click on repair your computer.

  (c) click on troubleshoot.

  (d) click on Advanced options , and then click auto repair.

  (e) follow the on-screen instructions and complete the repair.

  Method 2:

  If the computer does not boot the system from windows DVD then it could be a setting in the BIOS that is not compatible to windows startup 8 DVD or it's hardware

  You can make sure that the boot order is correct in the BIOS (Basic Input Output System), and the video card settings.

  For all related parameters of the BIOS, I suggest you to contact the manufacturer for support.

  BIOS settings are different for the different computer based on the motherboard manufacturer and the key to enter the BIOS can vary.

  Note: changes to the BIOS/complementary metal oxide semiconductor (CMOS) settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  Just reply with the results. I'd be happy to help you further.

• Satellite showing C55-5-137: no boot device please don't restart

  Hello
  Just bought a computer portable satellite c55-5-137 and when I start the computer shows this message: no boot device - please reboot the system.
  Tried to boot from usb win7, same message. Also in bios I don't have the option to disable secure boot, the only option is uefi (grayed out). Need help .

  I assume that the HARD drive is not visible somehow for your system.
  When you enter the BIOS disk HARD is listed and detected correctly?
  Try to set the BIOS to default settings and check again.

• Message ' No bootable device - please reboot '-Satellite C series

  Hello

  Didn't that my laptop for a little more than a month and the white on the arrow of the screen completely freezes just after the start. So could not use any program or do anything on the computer.

  Backed up all my data then got a friend IT to watch.
  Completely erase the computer to start and am now only able to get a black screen that says:-

  "Control of the media.

  then, after two seconds

  "No boot device - please reboot".

  Restarted about 10 times now and the same error message.
  When I press a key, the message is repeated.

  Thank you

  Hello

  First, check which device was chosen to start the laptop.
  Generally, the laptop should boot from the HARD drive.
  Then, go to BIOS (F2) and check if the HARD disk has been set as first boot device.
  In addition, you should check if the HARD drive is recognized in the first page of BIOS (size, name).
  In the case where the HARD isn t listed, the HARD disk drive is defective and cannot be found by the BIOS.

  This would require drive replacement HARD and the new installation of the OS.

• Cannot start the satellite M35X

  Hi all.

  Cannot start my Satellite.
  When I push the power button, it turns on, the blue led is ok but the HDD led blinks 1 or 2 times or it happened when it is not clear at all and put the laptop off, but the power button remains lit.

  However, from time to time, it starts up, shuts down load the XP but after 1 minute.

  I have reinstaled recently the WinXP, and I did a bios update. Before that, the laptop didn't have this behavior, however, the XP raported me that the hard drive is faulty.
  I figured it is something related to the HARD drive.
  What should I do?

  How can I be sure that the HARD disk is wrong?

  Hi mate,

  If your HARD drive has bad sectors, you must exchange it ;)

  For example before doing this, you can check for bad sectors using specific diagnostic tools HDD as Drive Fitness Test:
  http://www.HitachiGST.com/HDD/support/download.htm#DFT
  Here, you can download an image file to create a boot disk. Then boot from it and to start the test, it is quite easy! ;)

  If your HARD drive is faulty, this tool should recognize this.

• HP Pavillion l 17-g192dx: not found boot device, please install an operating system on your hard drive.

  ProdID:V0Q01UA #ABA

  Hello, so I performed a reset that restore my computer to factory settings, I have chosen to erase all files. I've done this before, and everything went well. What was going on, it was my disc useage was at 100% a lot and that something was wrong with my computer then I factory reset it. While the factory reset is 44% in "resetting your computer" and the next thing I knew I had 2 options, stop or start with advanced options. Well, I chose to stop it, 5 minutes later, I turned it back on and I ran a SMART check has no that was the ID # 9367LW-86J89N-MFPX7G-60BR3 followed by the product id that is shown above. He said that when I start to Boot Device not found, please install an operating system on your hard drive. Followed by the hard drive (3FO), I can only click f2 and it gives me the link to visit the Help Center. The computer saying that it did not have an operating system was not the first alert, that I had, it was something else saying there was an error of hard disk which then became not having not not an operting system. I tried to go to f11 and go in this way, but regardless of what it always comes back to the screen that shows the found boot device, please install an operating system. Help, please! Thank you. in advance.

  He was sent to HP they will solve this problem, my warrienty coverd.

• NO BOOT DEVICE - PLEASE INSERT the STARTUP DISK AND press a KEY ANY * please help *.

  I have a Compaq CQ-50 that worked very well. It has been upgraded to winows 7 Bonus a year ago. This is the message I get when I press the power button

  NO BOOT DEVICE - PLEASE INSERT THE BOOT DISK AND PRESS ANY KEY

  any help would appreciated more than you know

  Hello

  Have you tried to reinstall the hard drive if yes. Then the drive is bad & who has need of a replacement.

  If your laptop is still under warranty, contact HP and arrange for the disc replaced.

  If you are out of warranty and would like a guide to replacing the hard drive yourself, let me know.

• Satellite L300 - no boot device

  (I am a German<~>

  Hello
  my laptop does not start after it crashes. I was typing my reports for the school. It says "no boot device" and I don't have a backup or a recovery disc.
  (I forgot to create). What can I do now? I need my Vista 32 bit Home Premium back. But how?
  And I don't have registries it.

  I have a Toshiba Satellite L300 Model.

  Hello

  The HARD drive is recognized in the BIOS? If so, you can start in safe mode?

  To be honest, it looks like this drive is defective and so the laptop couldn t start more of the HARD drive. Maybe you need a new and if your laptop is under warranty, you should get a new one free of charge from the ASP.

  Welcome them

• Cannot start my Satellite P20 - "session3_initialization_failed".

  Hello

  I have a problem with my Satellite P20 932.
  I can t boot my WXP more. It comes with a blue screen error message:
  "session3_initialization_failed".

  Cannot start recording mode... nothing...
  Is there a manual for the laptop to download somewhere?
  Maybe it's a hard drive, RAM or fault of the graphics card, I put t know.

  I would like to know how I can change the RAM of my laptop HARD drive.

  Greetings

  Hello

  Is - this exact description of your problem?

  > Could not start recording mode... nothing...
  This way nothing happens when you press the button walk / stop? Can you enter the BIOS settings or see Toshiba welcome screen?

  If you ask the Maintenance manuals that I have to say that this document is not for public use and you will not be able to download.

• Satellite L655 - no boot device

  Earlier today, I bought a brand new Satellite L655 - 1 DM. It is not a BONE, so I tried to install a Windows 7. However, as I start the laptop after the initial Toshiba screen I get the following:

  Check the connection of the cable!
  PXE - MOF: Exit Intel PXE ROM.
  No boot device - insert boot disk and press any key.

  Certainly, I am a complete newbie laptop because it is the first laptop I have ever bought, but I'm doing something wrong? I put the Windows 7 DVD in, start the laptop and I get this message. Is there anything else I should do, or a sort of setting I should change so that it works? I did a search on google for a solution but could not find one. Can someone help me?

  Hey,.

  It is generally only related to an incorrect boot order.

  If you start your laptop go in the BIOS boot menu. So press the F12 key. Then place the Windows 7 disc, then select CD/DVD drive as a boot device. Now, the computer will begin with installing Windows, then follow the instructions on the screen.

  Check this box!