Cannot start computer

original title: can not stsrt computer

Under mode normall I end up with a white screen

Under repair mode all the getting is checking your system for problems

I tried to boot from the cd but did not press f12?

At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

See you soon.

Mick Murphy - Microsoft partner

Tags: Windows

Similar Questions

  • Cannot start computer? vill will not accept my code

    When I start my computer, it says - will not accept your profile and can not start and I tried many Jules Destrooper. O (sorry my English not good...)

    Hello

    There may be help here in a better language for you - Up at the top where it is said to the United States - English - click
    that and look at the other languages.

    You can try to fix it with Safe Mode - repeatedly press F8 as you bootup.

    Some programs such as the Google Updater (if you added the toolbar Google, Chrome or Google Earth) has been
    known to cause this problem.

    How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
    http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

    How to fix error "your user profile was not loaded correctly! You have been logged on with a temporary
    Profile. "in Vista
    http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.html

    BE VERY CAREFUL IF YOU USE THIS ONE:

    DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrrups you are TOAST.

    How to enable or disable the real built-in Administrator account in Vista
    http://www.Vistax64.com/tutorials/67567-administrator-account.html

    Use the hidden administrator account to lower your user account APPLY / OK and then lift it to ADMIN.
    This allows clear of corruption. Do the same for other accounts if necessary after following the above message.

    You can use the hidden - administrator account to make another account as an ADMINISTRATOR with the same password (or
    two with the same password) use to test or difficulty of the other.

    You can run the Admin account hidden from the prompt by if necessary.

    This tells you how to access the System Recovery Options and/or a Vista DVD
    http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

    If you cannot access your old account, you can still use an Admin to migrate to another (do not forget to always
    not that an Admin account that is not used except for testing and difficulty).

    Difficulty of a corrupted user profile
    http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

    I hope this helps.

    Rob - bicycle - Mark Twain said it is good.

  • cannot start computer in safe mode vista

    Laptop was working fine when I went to bed, got up the next morning, you press Ctrl + Alt + Delete and computer is stuck on the welcome.  It's been that way.  I can only boot into Safe Mode - Networking.  Ironically, the problem started after Symantec performed an update on March 22, 2012.  Any suggestions

    Looks like you may have a virus or other malware. Get your updated antivirus program and run a full scan of the system.

    -

    Microsoft has suggestions and offerings to

    http://Windows.Microsoft.com/en-us/Windows7/how-do-I-remove-a-computer-virus

    -

    Moderator Forum Keith has a few suggestions along this line to

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-performance/Windows-Explorer-has-stopped-working/6ab02526-5071-4DCC-895F-d90202bad8b3

    -

    If that suits him fine. If this is not the case, use system restore to go back to an earlier date at the beginning of the problem. To run system restore, click Start-> programs-> Accessories-> System Tools-> system restore. Click on the box that says show more restore points.

    -

    You can check the corrupted system files. Open an administrator command prompt and run SFC if the above does not help. Click START, and then type CMD in the search box, right-click on CMD. EXE and click run as administrator. Then, from the command prompt type sfc/scannow.

    -

    Finally if all else fails, you can look at the rather cryptic system event log. To make, click Start-> Control Panel-> administration-> event viewer tools. Once in Event Viewer system log-click and scroll entries looking for these "error" with indicator see if you can find guidance on where the problem may be.

    `

    I hope this helps. Good luck.

  • Cannot start computer in mode normal mode only safe

    When I start my computer it only starts in safe mode. I can't boot into normal mode. What can I do to change this? I tried to start it normally, but it won't let me. Another thing is that I have a problem with is the resolution. I have a 19 "monitor and it will not stay on 1280 x 1024. I don't know what the resolution would be better, but is the 1600 x 900, I think that before the problems started.

    When I start my computer it only starts in safe mode. I can't boot into normal mode. What can I do to change this? I tried to start it normally, but it won't let me. Another thing is that I have a problem with is the resolution. I have a 19 "monitor and it will not stay on 1280 x 1024. I don't know what the resolution would be better, but is the 1600 x 900, I think that before the problems started.

    RE: starts only in Mode safe

    Find out if a check mark is set to boot in Safe Mode.
    Start button > in the search box, type msconfig > press the Enter key > uac prompt > click on Startup > make sure that no checkmark found nowhere > click OK when finished.
    See screenshot:

    RE: resolution
    If you go to the view window, can not move you the cursor down to the left until you see 1280 x 1024?

    Right-click in an open office space > personalize > display settings... For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem.

  • HP ENVY Sleekbook 6-1006sa: cannot start computer laptop

    My hard drive seems to be corrupted, and now my laptop does not start.

    Of course, the normal solution is to use the HP recovery disk, but my laptop can't even attempt to boot from my DVD drive (external). Market, I get a message in the lower left corner, saying "Press ESC for Boot Menu". At this point, if I press the ESC key all that get's the message replaced by 'ESC. '... Pause for Startup' - and no other update screen - never (well, at least 10 minutes). If, while in the stadium "Press ESC for Boot Menu", I press F2, the message is replaced by "F2"... Check startup' but then no progress is made.

    So now I'm at a loss to know what to do next. Please can someone help?

    Regards Tony.

    I solved the problem by:

    1. visit this page: http://hp.com/go/techcenter/pcdiags and using the last link to download ftp://ftp.hp.com/pub/softpaq/sp75001-75500/sp75230.exe which puts the s/w of recovery BIOS on a USB

    2 turn on/off my laptop while now the key Windows + B

    3 wait a long time for my PC boot from the English channel and set its BIOS

    Once this is done, everything was OK again.

    Tont regards

  • Cannot start computer laptop

    Hello
    I have an Acer Espire E40 and I recently installed a kind of "PC Optimizer", he worked in the first, removal of unnecessary files. However, I then noticed deletion of system files. I killed the process and then restarted my laptop. When I turn it on, the Acer logo appears with "start auto repair. He proceeds to diagnose my PC and I am presented with the fact that windows may not start and I need to restore the operating system. So I click on restore but nothing happens, the Acer logo appears again, but nothing happens, its been like this for 10 minutes. Any help would be appreciated.

    Thank you
    Ethan.

    If you press Alt + F10 at startup you're able to enter Acer erecovery?

    If so, you probably have a restore or refresh options, try this.

  • P580 BIOS update. Cannot start computer.

    I was preparing to install Windows 8.1 and read on the site of Lenovo I should get the bios update.

    http://support.Lenovo.com/en_US/research/hints-or-tips/detail.page?docid=HT073634

    On this site, I clicked to download and install the BIOS. Once the system is restarted, I got this message immediately.

    Hi DivineSire,

    As far as I KNOW, the Dolby Home Theater is included when you install the audio driver.

    If you have a device his Conexant, try to uninstall the current (including Dolby) and install the one below:

    Conexant Audio driver
    audio130w81.exe
    185 MB

    Concerning

  • Pavilion 15-d002TX: cannot start my computer. Getting an error like bootmgr is missing...

    I cannot start my computer. It is show as bootmgr is missing... Even he is not able to detect the boot device so that I can start it from a disc.plz help.

    Go into the diagnostic mode by typing F2 you power to the top or esc and select diagnostics... start the scan of the hard drive and report the results here.

  • The program cannot start because MSVCR110.dll is missing on your computer.

    HP Pavilion g7-2235 dx notebook PC.

    USB ports not working do not.

    Not installed Adobe Reader.

    The program cannot start because MSVCR110.dll is missing on your computer.

    Try reinstalling to resolve this problem.

    Reinstallation does not work.

    Any ideas anyone?

    Thank you.

    There are three files to download.

    vcredist_arm.exe

    Vcredist_x86.exe

    VCRedist_x64.exe

    Should I try any or all of them?

    Thanks a lot again.

  • I get an error message: "the progran cannot start because DEVOBJ.dll is missing on your computer.

    When I start my computer my screen is all black and the message says 'the progran cannot start because DEVOBJ.dll is missing on your computer. Try reinstalling the program to fix this problem' I don't see even the Start button if someone knows what's going on please help.

    Take a look at the following:

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/devobjdll-is-missing-cannot-login-reinstall/5080677a-DB05-4A34-B36F-d0c3329c2dd0

    I would also like to launch a full scan with your antivirus

  • The program cannot start because MSVCR80.dll is missing on your computer. Try reinstalling the program to fix this problem. Where can I get this program?

    Pop Up-

    The program cannot start because MSVCR80.dll is missing on your computer.

    Your response-
    Try reinstalling the program to fix this problem.
    Question-
    Where can I get this program to download?

    Hello

    If the problem is with iTunes, uninstall everything according to the instructions from Apple:

    «Remove and reinstall iTunes, QuickTime, and other software components for XP»

    http://support.Apple.com/kb/ht1925

    It is also the same list of what to remove what is in the link above from Apple:

    http://pcsupport.about.com/od/findbyerrormessage/a/MSVCR80-DLL-not-found-missing-error.htm

    Or try this program to remove it:

    http://www.revouninstaller.com/revo_uninstaller_free_download.html

    "Resolution of problems with iTunes for Windows Update"

    https://discussions.Apple.com/docs/doc-6562

    If the advice already given does not, please contact Apple for assistance.

    "Not to install iTunes or QuickTime for Windows"

    http://support.Apple.com/kb/HT1926

    "iTunes support-how to use iTunes.

    http://www.Apple.com/support/iTunes/

    "Contact iTunes Support.

    http://www.Apple.com/support/iTunes/contact/

    Or ask in the community Apple iTunes:

    https://discussions.Apple.com/community/iTunes

    ____________________________________________

    If the problem is not with iTunes, there is other information about this error on the link pcsupport.

    See you soon.

  • Why is my computer is giving me an error message that says: "cannot start service on Local computer print spooler?

    Why is my computer is giving me an error message that says: "cannot start service on Local computer print spooler?

    When I tried to install my printer, I got an error 1068: the dependency service or group could start. I tried to go into my computer management to enable the print spooler service, but it gave me the same error message each time. What is the dependency service or group and how I put in place?

    Hi SimoneJ,

    Try to replace spoolsv.exe is located in C:\windows\system32 in C:\WINDOWS\ServicePackFiles\i386.

    Starting from printer spooler services (start-> Run-> services.msc-> printer spooler).

    I hope this helps.

  • Why Windows cannot start the Firefox Service on Local computer?

    Hello, Tech Savvy people-
     
    For some strange reason, the message in the title is what I get when I look under Services in administrative tools.
    I am told:
    Windows could not start the Service of Firefox in the Local computer
    Error3: the system does not have the selected path.

    I did a full scan of my files (sfc/scannow) and my drive (chkdsk); completed a full virus
    In addition, malware scan and all the so-called runs along fine.

    But Firefox 12 needs several clickings of surface, and when it finally arrived, several minutes.
    Boring.

    No idea why my local network or Local computer cannot start Firefox?
    Can anyone suggest how I could get my system to find this path?

    Firefox used to mount quickly enough, and my other browser, IE9 still does, even though I don't like
    using IE and for about 3 years found Firefox generally to be a superior browser.
    Feel a little miserable if I go back to IE.

    Thank you for answering this aggravation.
    marlem388

    Hello

    • Did you of recent changes to the computer?

    Uninstall and reinstall the program Firefox then check.

    If the problem persists, I suggest address you the Firefox support team for assistance:

    http://support.Mozilla.org/en-us/home

    You can also post your questions on the forum of Firefox: https://support.Mozilla.org/en-us/questions/new

    It will be useful.

  • my HP Vista computer cannot start and stay sleeping mode.

    my HP Vista computer cannot start and always stayed at the sleeping mode. Help...

    Hello

    1. is it a desktop or laptop computer?

    2 have you made any changes to the computer before the show?

    3. what happens when you tried to wake the computer from sleep mode?

    Method 1:

    Step 1: Safe Mode

    Start your computer in safe mode and check the number.


    To start your computer in safe mode

    Step 2: Clean boot

    If you are not facing the problem in safe mode, and then put your computer in a clean boot and search for the question.

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    http://support.Microsoft.com/kb/929135
    Note: once you are done with the boot, follow step 7 of article to put your computer to normal startup.
     
    I hope this helps.
  • Cannot install SP1 - repair service cannot start your computer

    original title: try to install Norton 2012

    I can't install Norton 2012. It says I need service pack 1, when configuring her repair service cannot start your computer and then installs nothing

    Microsoft Windows Vista® (32-bit and 64-bit) Starter/Edition family Basique/Familiale Premium/Professional/Ultimate Edition with Service Pack 1 or later is the minimum requirement to install Norton 2012.

    Learn how to install Windows Vista Service Pack 1 (SP1)
    http://windowshelp.Microsoft.com/Windows/en-us/help/133c8953-c9cd-4FA5-8883-03e91bb6f2021033.mspx

    Learn how to install Windows Vista Service Pack 2 (SP2)
    http://windowshelp.Microsoft.com/Windows/en-GB/help/105f7420-6f7f-4FE8-8698-2f40ca5f53711033.mspx

Maybe you are looking for

  • HP 2000: password administrator or power on password forgotten

    I forgot my administrator password or power on password. I received a message system disabled with a code 9904362 someone can help me

  • Time system continues to change

    I use a MacBook Pro with Bootcamp. First of all, not to change the hour on Mac OS and Windows XP system. After having RealTimeIsUniversal = 1 in the registry of XP, the time is still ok on Mac OS. In Windows XP, it keeps being defined by 5 hours (e.g

  • new computer with 802.11ac - router E2000

    Purchase of a new Dell - choices are 802.11ac or B | G | N | wireless network. E2000 is N.  I f I buy computer with AC, it will work with this router?  I'm pretty good, but not a techie.

  • Reorganisation of our group

    We currently have a group with a pool of storage ('default') and two members: -PS4100, NL - SAS 7200 RPM in RAID 10 (smallest Member) -SAS PS6210, 10,000 RPM in RAID 50 (largest Member) I would like to convert the two members to the RAID 6 (to gain s

  • Decoding of a byte in an image

    In my blackberry project, I'm talking to a .net web service that returns a class person. The person class consist of a firstname, lastname, and image file. In the service, I'm coverting the image into a string in base64; I am setting up the image as