Cannot start exe in the execution engine

Similar Questions

• The program cannot find the execution engine

  I create an executable before normally and after as a Setup program. When I try it on computer with license complete LabView program works, but if I install it in another pc, it asks me to install the runtime, but the runtime engine is installed in the pc. What kind of error can cause this problem?

  Hi vsara,.

  If you use VISA functions in your program, you need to install the runtime VISA (VISA OR Runtime) on the other PC.

  Mike

• peripheral hardware configuration information cd/dvd player cannot start Windows (in the registry is incomplete) or damaged code 19

  Windows cannot start the cd/dvd drive because the configuration in the registry information is incomplete or damaged

  error code 19

  Have you read that the next page & run fix it tool:

  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  Please tell us the final result of the correction tool. S.Chatterjee

• Satellite U940 - cannot start or access the BIOS settings

  I try to help with a HARD on a U940 disk failure. The laptop still works a failure has been (almost certainly) the entire HARD disk.

  I have a new HARD drive in place but I'm unable to access BIOS, and the machine does not start of course. Just a black screen while the computer is trying to do something...

  • Then put the F2 on does not work
  • Then put the F12 on does not work
  • Then put the ESC on does not work
  • Out the battery did not work
  • Out the battery and the power cord and the discharge by pressing the power button / stop for 60 seconds, did not work.

  I can't get to the BIOS. In my view, that the machine was based on the Intel hybrid disc stuff using the DDI in RAID before and this quick book has been activated. Of course, I am unable to clean the machine to stop more since I can't start up with the old drive.

  What I really want to do, is to put everything back. Get rid of any RAID stuff and put Windows on the new HARD drive. Any ideas how I can get into the BIOS to move all of the RAID or FastBoot stuff?

  Posted by devondan
  

  I try to help with a HARD on a U940 disk failure. The laptop still works a failure has been (almost certainly) the entire HARD disk.

  I have a new HARD drive in place but I'm unable to access BIOS, and the machine does not start of course. Just a black screen while the computer is trying to do something...

  • Then put the F2 on does not work
  • Then put the F12 on does not work
  • Then put the ESC on does not work
  • Out the battery did not work
  • Out the battery and the power cord and the discharge by pressing the power button / stop for 60 seconds, did not work.

  I can't get to the BIOS. In my view, that the machine was based on the Intel hybrid disc stuff using the DDI in RAID before and this quick book has been activated. Of course, I am unable to clean the machine to stop more since I can't start up with the old drive.

  What I really want to do, is to put everything back. Get rid of any RAID stuff and put Windows on the new HARD drive. Any ideas how I can get into the BIOS to move all of the RAID or FastBoot stuff?

  Is it possible to disable hybrid sleep physically? Remove the CMOS battery? Replace the memory? I can't do it from the software or access the BIOS and I wonder if it is what keeps a clean boot.

• Satellite A100 - 510 PSAA2E cannot start - nothing on the screen

  Hello

  I had Satellite A100-510 (PSAA2E) since May 2006.
  2 weeks before, when I tried to switch the fans started spinning and the LED lit and after about 2 seconds, it restarts without showing anything on the screen.

  There is also no beeps or anything.

  I tried almost everything: remove the hard drive, screen, wireless card, dvd player, change the RAM between the slots...
  It makes no difference if.

  So I think it's a problem of memory or the motherboard is dead, what do you think?

  > So I think it's a problem of memory or the motherboard is dead, what do you think?
  Yes, the mentioned parts could cause this problem

  But it would be the worst case and you must contact the Toshiba ASP for more details

  Before that you would get in contact with ASP, I recommend you try this:

  -Remove the battery, disconnect the adapter.
  -Wait 30-60 minutes
  -Bring the two parties together and try to turn on the laptop

  Maybe if this work around short help

• Windows search does not start even after the execution of my fixit

  I am running Windows XP, windows search is in my startup folder.  The bar indicates "expects to receive indexing status" / when I try and open start-all programs-windows search I always get error popup Windows Search is not running. To start it, click the start menu... "what I did of course everything.  I tried the Mr Fixit, but she comes back with "not fixed".  Help - please!

  Try going into the service by clicking Start---> Run, type services.msc, click ok. Scroll down to see if windows search is enabled.   You can also check in Control Panel, add/remove programs to see if you have research above windows 4.0 installed.

• Z820 - BIOS updated to v2.55 - cannot start or install the installation of Windows 7 (UEFI) disc

  Hello

  I have serious problems with the boot and install Windows 7 on my Z820.

  My problems started with Windows Boot Manager, throwing an error in the boot, saying that "the Windows Boot Configuration data file is missing required information". In the end, I decided to do a full clean reinstall of WIndows. However, I was unable to get Windows 7 installed. I was able to boot the disc at retail of Windows 7 64-bit UEFI mode, but he had problems with the installation. Each attempt ended with an error stating that 'Windows could not update the configuration to start the computer. Installation cannot continue. ».

  It was the BIOS v2.08. Intel 520 (240 GB) SSD as boot drive and 2 TB SATA HARD drive as data disc on the ports of controller LSI 2308 0 and 1 respectively. 2 DVD players on Intel AHCI ports.

  I decided to take a different path.

  I removed my data HDD and a DVD of the Z820 player. I put my SSD (which will become the startup disk) and a DVD player on both ports to AHCI.

  I've updated the Z820 BIOS with the latest version (v2.55, February 13, 2013), did a reset CMOS (machined cable disconnected) and reset the BIOS to factory default settings. Then, I put 'OptionROM mass storage' mode EFI and the storage on AHCI mode.

  Now, when I put in retail Windows 7 SP1 64-bit installation DVD and select the drive of DVD (UEFI) to start, I get just a flashing dash. I noticed also that some fans begin immediately turn faster.

  To summarize:

  I am unable to boot Windows 7 SP1 64 bit DVD installation detail at all and therefore impossible to install Windows 7.

  Configuration of the system (as in the last installation attempt):

  -Dual Xeon E5-2680

  -32 GB OF RAM DDR3-1600 PC3-12800

  -240 GB SSD IDE AHCI Intel oucederomsurlesecondport 520

  DVD player - Harbour AHCI

  -NVIDIA Quadro 4000

  -BIOS v2.55 (OptionROM in EFI, Secure Boot disabled mode mass storage)

  I'm getting desperate... ;-)

  Should I try reseating the RAM modules? Remove some RAM? Connect my monitor differently (currently DVI to VGA)? Replace the graphics card?

  Kind regards

  Dries

  In the safety device is the LSI controller set to device available and under device options is Donwload ROM option enabled.
  
  If they are both correct so I would say that your MB doesn't have, I got 3 failure already on my 6 systems! Not been more reliable work stations to this day.
  
  For intergatting search device & patches for WinToolKit, I can share my images because they contain information about the company & registered software.

• Tecra W50 - cannot start when installing the second hard drive (caddy).

  Hi all
  I have a Tecra W50 PT640A 04103NN1.
  When a second hard drive is installed in the Bay of DVD player cell phone will try to boot from the drive bay, not the internal drive
  This second drive has no operating system installed and so the fails to start.

  If I hit F12 at startup and select HARD drive, while the machine starts correctly. That is starts on the main hard drive.
  Change the order of boot in the BIOS makes all the difference; He will always try to boot from the second drive bay drive first.

  All known A it works correctly?

  Thanks in advance!

  Hi Doppelfrog,
  I had the same problem with my W50, got my HDD caddy a few days ago.
  You have a bit of luck to fix this problem?
  I believe that the Bios for this laptop is not developed to serve both drives (like the computer I had that one drive Bay) and it is not possible to prioritize the witch THAT HDD should start first...

  Kind regards
  Marcin

• Satellite C55 - C - 1 M 0 - cannot start Windows after the installation of the Dual Boot

  After I installed Ubuntu, when I try to start Windows, the process stops and says that there is a mistake: NTFS_FILE_SYSTEM. But I can't run Ubuntu without problem.

  Is there any special step before installing a Dual Boot with Ubuntu system?

  My laptop is a Satellite C55 - C - 1 M 0.

  Thank you. Kind regards.

  I guess the problem is due to changes in the size of the partition. I found a few questions about google with a ubuntu - NTFS_FILE_SYSTEM query. Maybe you should take a look https://www.google.fr/search?q=ubunt...sm=93&ie=UTF-8

• Satellite L40 cannot start or recognize the hard drive

  Hi all

  I bought a new Satellite L40 without windows or CD come with him,
  so now when I put the Xp CD, the drive cannot recognized the hard drive or a CD-Rom.

  error message
  Reboot and select boot device prober, or insert boot media in selected boot device and press a KEY.

  I'm not saying any key LOL
  It suppose to be all LOL key to

  Please your help in this matter

  Here another thread about the installation of the SATA drivers!
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=26040

  You must include the * Intel Matrix Storage Manager * during the XP installation process.
  As far as I know you have to press the F6 key to include the external USB FDD drive driver.
  Once you have included the SATA driver * DON T format the drive HARD * or create all partitions because that would erase the included driver!

  Another possibility to include the SATA drivers is the use of the * software to nLite.
  By using this software, you could include the SATA driver in the new created XP CD.
  And then you could boot from the new CD.

  > no initialization of SPARCFichiers of hard disk
  > can not load hard drive
  > Insert systemdisk and press a key

  This error message appears because you didn't boot from the bootable CD and/or the operating system has not been installed on the HARD drive and the laptop I wanted to boot from the HARD drive.

• Satellite A30 cannot start after cleaning the heatsink

  I have a problem with my sat a30. It lights for 5 seconds then goes automatically off and on again for 5 times, before finally shutting down completely. all this began after I cleaned the heatsink. can you give me some advice for what to do with this problem?

  Hello

  This path is not easy to say what is the problem, because, who know what did you exactly and how. As you know do something like that on your own is always risky.

  Are there signs of life of the cooling fan? AFAIK the CPU becomes very hot in just seconds after the start, and I presume that CPU is not cooled properly and because of this unit turns off.

• Why the execution engine is necessary?

  Hello

  I want to know what is the LabVIEW runtime engine exactly? Is whay required? What exactly is its role?

  Where can I find the answers to these questions? I searched this site, but could not locate a single document .

  Thank you!

  LabVIEW is no different from many other programming tools that is modular. Search your computer, I'm sure that you have installed flash player e g. You really prefer if any player code should be included and downloaded with each tiny web flash application? What of the visual basic runtime? How about Java runtime? Having a run time is the standard way of doing things.

  Of course, you could put everything inside every executable file, and this is how it was done in the good old days of LabVIEW 4.0, where the simpler LabVIEW executable (for example to add two numbers) has several megabytes (old discussion). Now, since we have the runtime, a LabVIEW executable can be very low.

  It makes perfect sense to include all the common code in a dll that can be installed once and shared by all LabVIEW executables. Do you really think it wise that all 20 LabVIEW programs installed on a computer had their own copy of the main FFT algorithm? A shared copy is enough!  As soon as you have more than one installed LabVIEW application, the savings are huge. What happens if a bug is discovered. Would you be enough patch 20 different program or simply update the runtime?

  Long ago, the same discussion came and I writteen a more detailed answer here

• Desktop icon error - cannot start programs using the icons

  original title: the desktop icon error

  When you try to click on the desktop icons to internet even the icon for Yahoo, has started 2 days ago, get 'cancelled due to restrictions in effect on this computer"looked at internet options, but no help, can't get the internet with the icon of internet explore that do not all other icons.

  Hi PhilWilfred,

  1. Did you the latest changes on the computer?
  2. You receive the error only on the desktop icons?
  3. You have security software installed on the computer?

  Check if the problem persists in safe mode.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

  If the problem persists in safe mode then I suggest that you perform the restoration of the system to the point while it was working fine.

  How to restore Windows XP to a previous state

  http://support.Microsoft.com/kb/306084

• High definition Audio Device Code 10 - device cannot start (tried all the typical solutions)

  Hey!

  Let me first, I use a laptop Aspire V3 - 772g.

  After the recent update of Windows 10, I had problems getting past the lock screen (took FOREVER to get to the point where I could enter my password) and it had been awhile, so I reformatted ('reset my PC' delete all files) - that didn't really solve my problem, so I used Rufus with an iso of Windows Microsoft to remove all partitions and start 10 REALLY cool. Since then, the laptop runs like a dream - in all but a point.

  It seems that no matter WHAT I do, I can't get my audio HDMI / TV to appear as an option in the playback devices (Yes, disabled devices is checked). Looking in the Device Manager, the high definition Audio Device has an exclamation point is to launch a code 10 - impossible to start the device. I tried to uninstall it, tried to install all the drivers of Intel V3 - 772 f page including chipset, updated my graphics driver / Realtek / drivers Intel HD audio... and yet, nothing. Ran /sfc, ran /chkdsk, nothing.

  I read something that made me believe .NET framework can be part of the issue - and in fact, I have a bit of difficulty getting the 3.5 installed / functional, but I finally did... and yet, nothing!

  Seriously, I'm losing my mind. I'll have to run my sound surround sound via an auxiliary cable into the laptop, which is sacrilege and a fraction of the quality.

  If there is SOMETHING, someone can suggest beyond the foregoing, please do!

  This problem is related to Intel HD audio via HDMI cable, if the driver is in the same package of graphics drivers.

  Have you tried to manually install the audio driver HD?

  you need to unpack the Intel graphics drivers (but no installation, you can use 7z to unzip), and then select update the driver HD audio from the Device Manager and point to the unzipped folder.

• Cannot start Explorer from the Task Manager shell, if another program is already specified as shell.

  Hey people.
  The company that I work uses Windows XP to run some software owners. Our software is configured to run as nt\currentversion\winlogon\ HKLM\microsoft\windows shell shell. I tried setting the shell two our product and random software like messenger or just the C drive, and every time when you use "run" of the Task Manager to open the explorer.exe shell, my documents will be opened instead of other things.
  It will open my documents instead of the shell until I have two close open windows, excluded the Task Manager and set the entrance to Shell back to "Explorer.exe".
  This problem persists between the platforms, and I've tried everything I can think of.
  Any help will be great.

  Hello

  Your Windows 7 is better suited for the public IT Pro on TechNet since your computer is on a domain network. You can follow the link to ask your question: http://social.technet.microsoft.com/Forums/en-US/category/w7itpro