Cannot start my inspiron 531 s

could someone tell me what error code data 0F00:0244 incorrigible is and if there is anyway it from the disk installation or in any case to try running system restore?

It is generally an area of possible bad hard drive (hdd) and the hard drive is a failure, needs to be replaced. the chance to do a system restore is extremely thin. It seems that the damage had occurred in the area of BONE that files is why restoring the system probably does not work.

is the issue of data recovery, system restore or simply to fix windows?

Tags: Dell Drives

Similar Questions

  • Reference Dell inspiron 531 vista equipped s won't start

    Dell inspiron 531 s fefuses Vista running at startup. Monitor shows nothing. Once I deleted pwer offers completely for about 20 minutes, it starts then as usual. This has happened for 2 weeks now

    Hello

    1 when was the last time it was working fine?

    2. don't you make changes to the computer until the problem occurred?

    I suggest you to try the steps below and check if it helps.

    Method 1: Try the steps from the link below.

     

    Troubleshoot monitor and video card:

     

    http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-monitor-and-video-card-problems

    Note: Also, check with your diet.

    Hope this information is useful.

  • Cannot find or download video drivers for Inspiron 531

    Hi guys

    System:

    • Inspiron 531
    • AMD Athlon Dual Core 6000 + 3.01 GHz
    • Windows Vista 32-bit SP2
    • NVIDIA GeForce 6150SE nForce 430

    Earlier, the display on two monitors connected to my Inspiron (Dell 24 "& Dell 22") deleted and enter Power Saving mode.

    Both screens are also connected to my XPS 8300 and they work very well with this system. I also checked the two cables and they work too.

    The monitors are usually connected to my Inspiron like this:

    • The 24 "monitor is connected to my Inspiron with a DVI - D to DVI - D cable
    • The 22 "monitor is connected through a DVI - D to VGA cable (the slot of DVI - D on the PC to the monitor VGA slot)

    However, if I run live of the Inspiron, its connected monitor VGA slot to works fine.

    The display shows a screen of information who advised me to click OK to complete the installation of the "new" NVIDIA software I have automatic updates turned off and I certainly did not begin any procedure update.

    Anyway, I clicked 'OK' and reconnected the monitors as normal to think everything would be ok, but they still do not work.

    I had a problem not long after I got this PC when I updated the video drivers from NVIDIA direct - I could run basically only to screen at resolution 800 x 600. I contacted the Support technique Dell and they said, it would be best to always get the updates driver directly from Dell. I did this and the problem was solved.

    I tried to find the relevant video drivers on the Dell site, but for some reason any my Inspiron no longer appears on my record details, only my most recent XPS. I tried to re - register, but I keep saying that my Service tag is no longer supported. I found anywhere else on this site where I can download the appropriate drivers.

    So I'm stuck - ideally I want to download the drivers for my dual monitor Setup works as it was before. I tried to do a system restore, but I don't know if it will work. In fact, I cling to the wide trying anything in case I find myself accidentally disabling VGA, power supply, so I won't be able to do anything with my system.

    Why Dell make life so difficult for someone who has purchased a product from them once his warrany has expired?

    Thanks for any help.

    What happens if you start in Mode safe?  -Restart, and then press F8 before Windows starts to load and choose Safe Mode from the menu.

    Assume correctly that it is an add-in PCI-e graphics card? A map is not... ??

    You can try this:

    1. Power off, unplug
    2. Press / hold the power button for about 15 sec.
    3. Carefully reinstall the video card in its niche.
    4. Then remove the battery from motherboard and the power button press / hold again to ~ 30 sec
    5. Reinstall the battery (right-side-to the top) and see if it works now

    NOTE: It may be a good idea to open BIOS setup (reboot and press F2) before trying the above. Copy down all the settings of the BIOS because the battery will reset the BIOS default settings. After reinstalling the battery, restart and press F2 and confirm that the settings match what you noted. Be sure to save changes before exiting the Setup program.

  • Inspiron 531 does not completely start upward after replacing the power supply?

    Hey people. This Inspiron 531 since 2007 and he has been a champion for me. In the past months, the power supply fan start getting real loud (intermittently) so I finally looked around and found the same feed Integrator Delta on ebay. Put him in this afternoon very carefully, but while doing the 'blue' cable hard drive that connects to the motherboard is out the motherboard. There are two connections on the motherboard, SATA 0 and SATA 3. I have no idea who it was so I tried it reconnection to SATA 0 (which was blue too) and all turned on. There, I sat on the DELL screen and no full boot. Shut down and tried the SATA 3 connector and basically the same thing has happened although there was some funky boss on the lower part of the screen and still no full boot.

    Any ideas or suggestions?

    Updated - I should also mention this power connectors P4 and P7 were not used until I swapped out.

    And also when I try and start I get the DELL screen that shows the F2 and F12 Boot Menu on the top right of the screen.

    jodeluxe

    The primary C: / SATA HDD, is connected to SATA 0 connector motherboard.

    Are the P1 24 pins and power connectors 4 pin P2, connected to the motherboard?

    Have you tried to remove and reinstall all the memory modules and the power data cables in front and all the readers and motherboard, to see if that makes a difference.

    Check the power LED button reading, is stable blue, flashing blue, Orange fixed, blinking Amber?

    Are there any 'beep', if there is, please publish the sequence of them?

    The Inspiron 531 Manual of use and troubleshooting is here:

    http://FTP.Dell.com/manuals/all-products/esuprt_desktop/esuprt_inspiron_desktop/Inspiron-531_owner%27s%20manual_en-us.PDF

    Bev.

  • Dell Inspiron 531 is not communicating with the Dell AIO 926 Photo printer.

    Dell Inspiron 531 is not communicating with the Dell AIO 926 Photo printer.  Maintains documents in the print queue and print them when the computer is restarted.  In addition, the computer does not recognize my Promaster digital converter when I plug it into a port.

    Hello

    Thanks for posting in the Microsoft Community Forum, please be assured that we would do our best to help you.

    Please answer the following questions that would help us provide a better solution.

    What version of Windows are you using?

    Try to follow the steps and check:

    Step 1:

    Visit the link following if you are using Windows 7.

    Printer in Windows problems

    http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

    If you are using Windows Vista, see the steps mentioned in the link.

    http://Windows.Microsoft.com/is-is/Windows-Vista/troubleshoot-printer-problems

    Try the steps from the link following if you are using Windows XP.

    Resources for the resolution of the printer in Windows XP problems

    http://support.Microsoft.com/kb/308028

    Step 2:

    Try to activate the devices associated with the Dell printer and disable the rest by performing the clean boot, once done try to print.

    You can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts. The following article explains how to solve problems in Windows Vista or Windows 7 by performing a clean boot:

    How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

    http://support.Microsoft.com/kb/929135

    Note: Put the normal computer as mentioned in step 7 of section.

    Step 3:

    About the issue with Promaster digital converter try to connect to another USB device or run the fixit and check:

    Hardware devices do not work or are not detected in Windows

    http://support.Microsoft.com/mats/hardware_device_problems/en-us

    Please feel free to respond if you have any other questions, we would be happy to help.

  • Upgrade a Dell Inspiron 531 to something with more memory and faster?

    Hello, I have a Dell Inspiron 531, 32-bit operating system, and the 3G memory in it but is Vista. I tried to upgrade to Windows 7, but after many attempts, could not go without having to clear everything and start over. So I'd do it if I have to do I was wondering if I could make the machine that is more memory better and faster, without having to buy a new computer say a Dell XPS 8300 (that I'll have to run a lot of photographic software in the future and I understand that this could be a good computer for that?) In any case, it is possible to 'upgrade' the computer something like this please, or I have to save my pennies for a new? Thank in advance for your advice.)

    Hello

    If you upgraded to 4GBs off RAM you won't get many benefits

    Here is an article on what is happening with 4GBs of RAM:

    http://support.Microsoft.com/kb/929605

    "If a computer has many features implemented, the available memory can be reduced to 3 GB or less." However, the maximum memory available in 32-bit versions of Windows Vista is typically 3.12 GB. »

    and you should also consult the Dell manual for your model desktop computer see what amount of RAM your motherboard would answer anyway

    http://support.Dell.com/support/topics/global.aspx/support/my_systems_info/manuals?c=us&l=en&s=Gen& ~ CK = anavml

    and here is the reason why you can not upgrade to Windows 7

    There are no Windows 7 drivers written for her by Dell

    http://support.Dell.com/support/downloads/DriversList.aspx?c=US&l=en&s=GEN&ServiceTag=&SystemID=INSP_DSKTP_D531&OS=WLH&OSL=en&CATID=&impid=

    Click on the menu at the link above drop-down operating system

    itonlt has XP and Vista drivers available

  • Error on startup: "Windows cannot start. A recent hardware or software change might be the cause.

    Original title: is that what Microsoft offers downloadable boot for Vista drive data

    I have a Windows error recovery when Windows does not start. A recent hardware or software change might be the cause.

     
    Loops in this form BACK to watch as it starts, it then restores to the error recovery screen.
    I need information from the startup disk so that I can read my Dell Inspiron 531 Windows disc and if all goes well the error; Download a Microsoft?

    Hello

    try a system restore of 1st

    If this does not download and use a startup, the ERD etc. neosmart

    http://www.windowsvistauserguide.com/system_restore.htm

    Windows Vista

    Using the F8 method:

    1. Restart your computer.
    2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
    3. Select the Safe Mode option with the arrow keys.
    4. Then press enter on your keyboard to start mode without failure of Vista.
    5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
    6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

    If that does not read this information

    the link below is how to download and get a vista disk startup repair, which you can start from the

    http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

    Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

    http://www.bleepingcomputer.com/tutorials/tutorial148.html

    to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

    It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

    Change boot order it do dvd drive 1st in the boot order

    http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

  • Cannot start Windows and "Begin repair of launch" or "Start Windows normally" did not work.

    Original title: need help URGENT

    The normal Windows Vista (Home Premium 32 Bit) updated on my DELL INSPIRON laptop... Cannot start Windows

    'Launch Startup Repair' or 'Start Windows normally' did not work.
    What to do next without deleting my data? Thank you.

    Hello

    1st thing to try is a restoration of the system in safe mode

    http://www.windowsvistauserguide.com/system_restore.htm

    Windows Vista

    Using the F8 method:

    1. Restart your computer.
    2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
    3. Select the Safe Mode option with the arrow keys.
    4. Then press enter on your keyboard to start mode without failure of Vista.
    5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
    6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

    If that does not read this information

    the link below is how to download and get a vista disk startup repair, which you can start from the

    http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

    Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

    http://www.bleepingcomputer.com/tutorials/tutorial148.html

    to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

    It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

    Change boot order it do dvd drive 1st in the boot order

    http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

    Data recovery, if required

    1. remove the hard drive and it slave in another computer

    2 buy or borrow a USB disk drive hard put in yout case then plug it into another computer and read the hard drive like this

    3. try Knoppix

    http://www.Knopper.NET/Knoppix/index-en.html

    BUT this method depends on your hardware in the computer that failed

  • THE CALICO CAT WINDOWS DESKTOP BACKROUND WILL BE WORK ON A VISTA ULTIMATE 32-BIT WINDOWS AND ANY SERVICE PACKS DELL INSPIRON 531?

    I have a Dell Inspiron 531 in the House. It's Windows Vista Ultimate 32 bit without service pack. Can I download wallpaper cat Calico of Windows (r) and set it as background?

    Sincerely,.

    Numbuh3wearsabutterflycoutume

    PS I went on the site of Microsoft Windows to download, but I cancelled.

    Although the calico at http://windows.microsoft.com/en-US/windows/downloads/personalize/wallpaper-desktop-background cat is technically for Windows7, I don't see that this will not work on your system (since it is, after all, just an image).  Go ahead and try it.  I don't think that you will have problems with the issue of the service pack with just a background image.  If it does not or you cannot configure it to your liking, then maybe it does not match with the theme you are using (but which is not likely or must have its size adjusted before putting the context).  But I suspect that it will work fine.

    I hope this helps (and BTW, I LOVE the photo since I am a person cat myself).

    Good luck!

    Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • A Dell Inspiron 531 computer will be compatible with Windows 7? Conflicting information between sources.

    I looked on these contradictory information, and here's what I found... I'm still not sure about that.
    I found information about this Dell Inspiron 531 computergoing to be compatible with Windows 7 on the site of Microsoft and in the control panel of that computer system information.
     
    But then I found more information on the Dell website that indicates otherwise.
     
    Please follow me closely here, it took some time to compile this info.
     
    Allows first eliminate what would be the simplest solution I already tried, that would be the "Windows 7 Upgrade Advisor" located at this address: http://Windows.Microsoft.com/UpgradeAdvisor
     
    On this Web page, there is a small program to download and install that is supposed to tell me if this computer is compatible with Windows 7 in processor speed, RAM, graphics card, etc. and devices, automatically... Unfortunately, it does not work... I installed it and it stopped with the message: "Windows 7 advisor stopped working" so that program and this option is unnecessary.
     
     
    It is the "Windows 7 system requirements" list of information... it shows that I need at least a 1 GHZ processor or faster, 32-bit... This Inspiron 531 has a 2 GHZ processor and is 32-bit. This page is says I need 1 GB of RAM... it has 1 GB of RAM. It says I need 16 GB of available disk space, it has a C 138 GB primary hard drive which will be deleted when Windows 7 is ready to be installed. And he said that I need a"Graphics card DirectX 9 (with WDDM1.0 or higher driver)" ... the last part in parentheses is the only part that I'm not sure, but my system via the control panel information shows most of this information as being adequate.
     
    Go to this URL: http://support.dell.com/support/edocs/systems/inspd531/en/OM/appendix.htm#wp1149549 to see the Dell Inspiron 531 annex page online and click on the link above titled, 'Specifications' or just scroll to see... there in the category 4th down titled 'Video', it shows the "video integrated Nvidia (DirectX 9.0 Shader Model 3.9 Graphics Processing Unit) '. This seems to correspond to the above listed"DirectX 9" info page "Windows 7 system requirements".
       
    But then there are 2 pages Web of Dell, which indicate that this Dell Inspiron 531 is only supported by Windows Vista and Windows XP... see this URL for this Web page... http://support.dell.com/support/topics/global.aspx/support/osmatrix/index?c=us&cs=19&l=en&s=dhs& ~ ck = mn  
     
     
    It shows, once you scroll down just a bit, a list of the current Dell computers that can support Windows 7... the Inspiron 531 is not on this list.
    This list excludes the Inspiron 531, but it then says' does not have a computer on these lists? Click here to shop for a new Dell! » .. .bad grammar side, this line that I'm pointing out may just be trying to sell me a new Dell computer, if I actually need or not Dell
    !
     
    And finally my info the computer from the control panel shows aprocessor 2 GHZ, 1 GB of RAM or 958 MB anyway and the 32 bit OS.
     
    And Yes, I ran the built-in diagnostic test Dell PSA on this computer and when it tests the sound card and the speakers, he plays the song a bit in each channel and then on both channels, so I know that the material is good on this computer.
    I know it's a lot to go through... it took me a while to compile this info, and I sent a version of this letter with screenshots and other MS Tech in India who I worked with for a month on the phone and email to correct a problem of 'no sound' that simply cannot be beat.
    But I'm trying to make sure before I do a clean install of Windows 7, when the disc arrives here, I don't clean it hard drive alone to experience Windows 7 does not work on this machine.
    Actually, I'm a Mac user and I don't have much trouble in those... Just trying to fix the computer of my mother for it, and now it seems that trying to install Windows 7 is the only way to get the sound back so that my mom can enjoy some music again.
    I never thought that I would like to know as well on the PC troubleshooting I've learned in the last month, but I don't like, and there is still no sound on this computer and everything has been tried... I made a collage of a hundred different error messages from Windows that I think I'll put it up for bid on ebay... I just want to go home to my trusty Macs.
     
    Please give me your comments... I would of course welcome.
    Thank you
    NuMetro

    I am happy that you have it installed, but you have sound?

    I was too surprised when Windows 7 to install all my drivers in device for me!

    The video driver that it wanted to install was even later that of Nvidia. Also, it does not have the driver Physx I needed, so I had to install one myself. The other driver, that he has not installed was the pilot for the X - Fi card. He did install my motherboard if chipset drivers, but I turned around and installed ones that came with my motherboard.

    Windows 7 does a better job to settle on earlier versions of Windows, but do not watch install what he wants to make sure that it does not have something that you don't want. He came along and updated my video driver again, but when that happens, it installs just the driver itself and not the driver Physx and my video control panel. Now when he talks about video drivers, I just go to Nvidia and download the full set.

    You have the option in there for Windows Update to select which updates you want to allow. I would have put to allow you to decide which ones you want and do not let do it on his own.

    I'm glad you're a happy camper! I do not see where you come with Vista, I jumped on this operating system completely because of the horror stories I've heard.

  • Inspiron 531 s graphic problems

    Hello everyone, I'm new to the forum, please bear with me. I've had a laptop XPS M140 for some years now and we would like our office by a base of kensington. The monitor is dead on our old HP desktop computer so we opted for the use of the laptop. We found a s at a yardsale Inspiron 531 this weekend that the owner said was bluescreened after a power failure. The monitor and all the other elements were still new in box and never used. That's the only reason why I bought it. Once I got home, I plugged it all and the blue screen was an Unmountable Boot Volume error, which I fixed using my XP drive and the console recovery. This computer has never been connected to the internet and has been used for only game card games.it took a few hours to install SP3 and all other last 3 years worth of updates, but the computer is working fine now. The only problem I have is that it will not download the streaming video or Webcam live webcam. The video/cam will start to load and then stop and display an error message. Is there some software that I'm missing or the need to update. My XPS has never had this problem. Thanks in advance for any help.

    Hi rm31859,

    Do you get any error messages when you try videos? Download the latest player flash site below and let know us if it works.

    http://Adobe.LY/mwfN1

  • Inspiron 531 desktop PC: TSSTcorp DVD +-RW TS - H653B error burning dual layer DVD

    Hello

    In November 2007, I bought this computer with the following configuration:

    Computer: Inspiron 531 desktop computer

    Processor: AMD Athlon 64 X 2 Dual-Core 5000 +.

    RAM: 2GB Dual Channel DDR2 SDRAM at 667 MHz-2 DIMMS

    DVD/CD burner: ASSEMBLY (TSSTcorp DVD +-RW TS-H653B), DVD +/-RW 16 X, NAKED, TOSHIBA SAMSUNG STORAGE TECHNOLOGY

    Operating system: Windows Vista editions Home Premium

    Problem: whenever I try to burn a DVD + R DL, it fails when it starts to burn the 2nd layer.

    I use the following media:

    ################################

    ----------------------------------------------------------------------------
    Unique disc identifier: [DVD + R - DL:RITEK - S04-066]
    ----------------------------------------------------------------------------
    Disc & Book Type: [DVD + R DL] - [DVD + R DL]
    Manufacturer name: [Ritek Corp.]
    Manufacturer ID: [RITEK]
    ID of Type of media: [S04]
    Product review: [066]
    Blank disc capacity: [4 173 824 sectors = 8.55 GB (7.96 Gio)]
    Recording speeds: [2.4 x 3.3 x-8 x]
    ----------------------------------------------------------------------------
    [DVD Identifier 5.0.1 - http://DVD.Identifier.CDfreaks.com]
    ----------------------------------------------------------------------------

    ################################

    DVD/Image used as the source type: data DVDs and movies

    Software used: DVDFab, Imgburn, Nero, Roxio

    Here's the last dump error given by the ImgBurn software:

    ============================

    I 00:29:17 Version of ImgBurn 2.3.2.0 started!

    I have 29:0017: Microsoft Windows Vista Home Premium Edition (6.0, Build 6000)

    I 17:29:00 total physical memory: 2 094 976 KB - available: 1 006 768 KB

    I 00:29:17 initializing SPTI...

    I 17:29:00 searching for SCSI / ATAPI devices...

    I found 00:29:17 1 tickets!

    I 00:30:35 operation started!

    I 00:30:35 Source file: C:\TADA\my_project\my_project.iso

    I have file Source 00:30:35 sectors: 3 176 931 (MODE1/2048)

    I have 00:30:35 Source file size: 6,506,354,688 bytes

    I 00:30:35 ID volume Source file: SFU20STPRTL

    I 00:30:35 Source file Application identifier: CDIMAGE 2.46 (10/12/2000 TM)

    I 00:30:35 file Source or file systems: ISO9660 (Bootable)

    I have 00:30:35 peripheral destination: [2:1:0] TSSTcorp DVD +-RW TS - H653B D200 (E (fiber))

    I have 00:30:35 Destination Media Type: DVD + R DL (Disc ID: RITEK-S04-66) (speeds: 4 x, 6 x, 8 x)

    I 00:30:35 Destination media sectors: 4 173 824

    I have 00:30:35 write Mode: DVD

    I write 00:30:35 Type: DAO

    I have 30:0035: write speed: MAX

    I have link 00:30:35 size: Auto

    I have 00:30:35 Test Mode: No.

    I 00:30:35 BURN-Proof: enabled

    I 00:30:38 optimal area of L0 data capacity: 1 588 480

    I 00:30:38 optimal L0 data area method: ECC block boundary

    I 00:31:17 filling buffer... (40 MB)

    I 00:31:17 writing LeadIn...

    I 00:31:28 writing Image... (LBA: 0 - 3176930)

    I 00:31:28 writing layer 0... (LBA: 0 - 1588479)

    I 00:36:46 writing layer 1... (LBA: 1588480-3176930)

    W 00:37:17 failed to write sectors 1589120-1589151 - write error

    W 00:37:17 retrying (1 of 20)...

    W 00:37:17 attempts failed - invalid address for write

    W 00:37:17 retrying (2 of 20)...

    W 00:37:17 attempts failed - invalid address for write

    W 00:37:17 retrying (3 of 20)...

    W 00:37:17 attempts failed - invalid address for write

    W 00:37:17 retrying (4 of 20)...

    W 00:37:17 attempts failed - invalid address for write

    W 00:37:17 retrying (5 of 20)...

    W 00:37:17 attempts failed - invalid address for write

    W 00:37:17 retrying (6 of 20)...

    W 00:37:17 attempts failed - invalid address for write

    W 00:37:17 retrying (7 of 20)...

    W 00:37:17 attempts failed - invalid address for write

    W 00:37:17 retrying (8 of 20)...

    W 00:37:17 attempts failed - invalid address for write

    W 00:37:17 (9 of 20) try again...

    W 00:37:17 attempts failed - invalid address for write

    W 00:37:17 retrying (10 of 20)...

    W 00:37:17 attempts failed - invalid address for write

    W 00:37:17 retrying (11 of 20)...

    W 00:37:17 attempts failed - invalid address for write

    W 00:37:17 (12 of 20) try again...

    W 00:37:17 attempts failed - invalid address for write

    W 00:37:17 retrying (13 of 20)...

    W 00:37:17 attempts failed - invalid address for write

    W 00:37:17 retrying (14 of 20)...

    W 00:37:17 attempts failed - invalid address for write

    W 00:37:17 retrying (15 of 20)...

    W 00:37:17 attempts failed - invalid address for write

    W 00:37:17 retrying (16 of 20)...

    W 00:37:18 attempts failed - invalid address for write

    W 00:37:18 (17 of 20) try again...

    W 00:37:18 attempts failed - invalid address for write

    W 00:37:18 (18 of 20) try again...

    W 00:37:18 attempts failed - invalid address for write

    W 00:37:18 retrying (19-20)...

    W 00:37:18 attempts failed - invalid address for write

    W 00:37:18 (20 of 20) try again...

    W 00:37:18 attempts failed - invalid address for write

    W 00:39:01 retrying (21)...

    W 00:39:01 new attempt failed - invalid address for write

    W 00:39:06 retrying (22)...

    W 00:39:06 new attempt failed - invalid address for write

    E 00:39:09 failed to write sectors 1589120-1589151 - write error

    I 00:39:09 synchronous Cache...

    I 10:39:00 closing track...

    I 20:39:00 disc finalize...

    W 00:41:19 delayed potential 'WaitImmediateIO' error (0/2) - Session Fixation error writing opens

    W 00:43:02 delayed potential 'WaitImmediateIO' error (0/2) - Session Fixation error writing opens

    E 00:43:08 finalise disc failed! -Reason: Session Fixation error writing opens

    I 00:43:08 finalising disc (last attempt!)...

    ==============================================================

    Please let me know what wrong here? My disk is bad or media is not compatible or what? Looks like the guys at Dell are unable to understand the problem or do not want to understand. I would not get any help from them.

    Help, please.

    Thank you

    Message edited by vayu on 04/23/2008 11:22

  • Mac cannot start after el captain

    Cannot start after updating mac

    Safe Mode boot removes the system caches that can help after an OS X day or level.

    Follow these steps to start in safe mode.

    1. Start or restart your Mac.
    2. As soon as you hear the startup tone, hold down the SHIFT key.
    3. Release the SHIFT key when you see the logo Apple appears on the screen.

    After the Apple logo appears, this may take longer than usual to reach the login screen or your office. This is because your Mac performs a check of directory of your drive to boot in safe mode.

    To leave safe mode, restart your computer without pressing any keys during startup.

    Try safe mode if your Mac does not end commissioning

  • Firefox is exhausted before but cannot start more

    Firefox is exhausted before but cannot start more.
    I tried the solutions, but it does not work

    Large. Glad to know you have the root of the problem, and thanks for posting back.

    Usually, we suggest that when checking for malware several tools to serve because no single tool is looking for or find everything. The standard help article

  • Cannot start Firefox, crash even in Crash Reporter. Not be able to start in safe mode either.

    Cannot start Firefox. He goes to Mozilla Crash Reporter every time. I can't even start it Safe Mode.
    I tried to uninstall and delete all the files related to Mozilla Firefox in & AppData & and each base registry with RegEdit.

    I have run, or at least try, on a system with Windows 7 64 bit, 8 GB RAM, 314.22 driver for Nvidia GeForce GPU and a CPU Intel Core i5 2500 k CPU.

    Little help would be nice.

    Hi deliubogdan

    Try to remove the extension DataMngr (Datamngr.dll)

    Do a check with some malware malware, analysis of programs on the Windows computer.

    Please scan with all programs, because each program detects a different malicious program.

    All of these programs have free versions.

    Make sure that you update each program to get the latest version of their databases before scanning.

    Alternatively, you can write a check for an infection rootkit TDSSKiller.

    See also:

Maybe you are looking for