Cannot start my Satellite L40 - 14G

Similar Questions

• Cannot start the satellite M35X

  Hi all.

  Cannot start my Satellite.
  When I push the power button, it turns on, the blue led is ok but the HDD led blinks 1 or 2 times or it happened when it is not clear at all and put the laptop off, but the power button remains lit.

  However, from time to time, it starts up, shuts down load the XP but after 1 minute.

  I have reinstaled recently the WinXP, and I did a bios update. Before that, the laptop didn't have this behavior, however, the XP raported me that the hard drive is faulty.
  I figured it is something related to the HARD drive.
  What should I do?

  How can I be sure that the HARD disk is wrong?

  Hi mate,

  If your HARD drive has bad sectors, you must exchange it ;)

  For example before doing this, you can check for bad sectors using specific diagnostic tools HDD as Drive Fitness Test:
  http://www.HitachiGST.com/HDD/support/download.htm#DFT
  Here, you can download an image file to create a boot disk. Then boot from it and to start the test, it is quite easy! ;)

  If your HARD drive is faulty, this tool should recognize this.

• Satellite L40 - 14G: how to change the function of "closing the lid.

  Hello

  If I close my laptop Toshiba Satellite L40 - 14G, PC went to the sleep mode.
  But I want that if I close the PC went to the sleep mode but it should function normally and show swtich off the coast.

  How can I do?

  Thanks for the reply!

  You have Vista?
  If Yes, then follow these steps:

  -Go to control panel
  -Energy options
  -To the left, click on the option called something like select what should happen when the lid is closed

  Greetings

• Cannot start my Satellite P20 - "session3_initialization_failed".

  Hello

  I have a problem with my Satellite P20 932.
  I can t boot my WXP more. It comes with a blue screen error message:
  "session3_initialization_failed".

  Cannot start recording mode... nothing...
  Is there a manual for the laptop to download somewhere?
  Maybe it's a hard drive, RAM or fault of the graphics card, I put t know.

  I would like to know how I can change the RAM of my laptop HARD drive.

  Greetings

  Hello

  Is - this exact description of your problem?

  > Could not start recording mode... nothing...
  This way nothing happens when you press the button walk / stop? Can you enter the BIOS settings or see Toshiba welcome screen?

  If you ask the Maintenance manuals that I have to say that this document is not for public use and you will not be able to download.

• PXE - E61 and PXE - M0F errors when starting on Satellite L40 - 12 K

  I have satellite L40 - 12K, with vista home premium.
  After a while, I saw two in the start screen error messages.
  PXE - E61: Media test failure, check cable of
  PXE - M0F: Exit PXE ROM

  After contacting the helpline to a? ¬0, 50 per minute, they advised me to restore the PC hole. !!! @@$$%^^^&^%
  So I google on these errors and found to change the boot order.
  My default setting is:
  1 network (LAN)
  2 HARD DRIVE
  3 CD/DVD

  I changed it to:
  1 HARD DRIVE
  2 network (LAN)
  3 CD/DVD

  Now my error messages disappeared and see my screen to the user directly.

  Google so first of all, before you listen to paid helpdesk.

  Yes, sometimes they really Don t know the troubleshooting more simple that should be done by each call. So I hope someone writes good troubleshooting docs to improve their rate of success with such clients * easy * problems.

  Beautiful week

  Dennis

• Need all drivers for Win XP on Satellite L40 - 14G.

  I want to change OS Vista on XP Pro OS. Need all drivers L40 - 14G for XP operating system. Thank you very much!

  Sorry, I can not confirm your photo... I was there 2 minutes on the site to download drivers and the link WORKS!

  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp?service=EU

  Click on the link and download the drivers, the link works! Please try with another browser (internet explorer, Firefox)!

• Cannot start my satellite 4060 XCDT mode standby

  I can't start my satellite 4060 XCDT from sleep, from his sleep, I have to reboot for it to restart, sometimes, he'll leave the day before, but mostly he used, I tried updating the BIOS, nothing works!

  Hello
  often there is a problem with installed programs that Don t 'like' Mode standby or Hibernate.

  This could be for example downloadable, firewalls, Systemchecking programs.

  What additional hardware. Do you have the connected equipment that Don t supports sleep mode, such as PCMCIA cards for example?

  Good bye

• Cannot start up satellite M40 136

  Hello

  I have a Satellite M40 136 2.5 years old. I used it yesterday and then closed the lid then it shut down as usual. About half an hour later, I realized that I had to check a file so I opened the lid and normally he would back automatically, but it didn't. I pressed the button, which is surrounded by an LED, I think than orange means it's pending otherwise it is blue.

  When I pressed on it, he showed the light orange for about 2 seconds and then nothing for 5 seconds and then blue for 5 seconds. For these last 5 seconds the machine looks like it, he's trying to start, but then it off immediately. I tried and tried again, but it does the same thing. I tried to use the power cable. I managed to put the recovery DVDs during the 5 seconds, the blue light is on and I press the 'C' button, but it does not work.

  Does anyone have an idea on what I can do to get the machine to boot?

  Nicky

  Plug the laptop! Remove the battery and the AC adapter.
  Then wait about 30 min, then insert the battery and connect the AC to the laptop.
  Check if the mobile feed.

  If this isn't the case,-> contact ASP (certified partner) in your country, because the strange behavior of cell phone looks like a serious problem that cannot be solved by a common user!

  Good bye

• Cannot start my Satellite A110-275

  Hello

  I had one laptop Satellite A110-275. After the first days, when I bought someone spilled a glass of water. I send the laptop on a center here in Canada they have change the motherboard. Laptop worked for several months and a few weeks ago are starting to make me a problem such as:
  I start it and everything seems ok all lights are blue lit, I hear when the beginning of the video card fan and nothing appears on the screen.

  In the past after a few opening and closing laptop computer started but now its saying DEAD leds.
  Could be the processor or even once the motherboard? I already changed the 2 GB memory and nothing.
  Could someone help me with some ideas?
  Thanks in advance.

  Processor A110 - 275 Intel Core Duo T2400 satellite clocked at 1.83 GHz 2 GB of 533 MHz DDR2
  Thank you

  Hello Marina

  Please don't get me wrong, but I don't think there is that you can only do about it.
  Of course, there is a serious hardware problem, probably with the motherboard. I don't know which component is troublemaker, but if your computer laptop doesn't react at all, it can be electronic power supply.

  It may be the CPU. It may be the motherboard, but you must understand that it is not possible to provide an accurate diagnosis on this path. What you need is a professional help. Laptop must be controlled by diagnostic tools and it can be done in only authorized service. Contact them and explain the situation.

• Cannot start the Satellite Pro A120SE-180

  Support the necessary computer startup.

  I have a Satellite Pro A120SE-180. I took out the RAM to check how much I had. Then, I opened the battery compartment without thinking about the consequences. Now I get just a power indicator and that it will not start at all.

  I can't open the disk drive or get any life out of it. I was running an upgrade of Vista, which was available as a cheap option when I bought with Windows XP.

  Hi Rob,

  What might have happened, is that the operating system and a hard drive can have erased himself when the RAM and battery have been removed at the same time!

  The only way to fix and doing things is again to send it to a Toshiba service center and get them to look! Also, do not upgrade to Vista - I'm using XP and it seems to do the job the way it was supposed to! I intend to switch to another Satellite Pro, an A300 running Vista, but I will look for someone who can replace XP on it!

  Joe

• Cannot start by Satellite A10-S703 from sleep mode

  My boss gave me a Satellite A10-S703 running windows XP. I was tooling autour, when suddenly the computer is in sleep mode (LED flashes orange). I tried pressing the power button, but nothing happens. What should I do? I am seriously at the end of the roll and will be in hot water if I can't get the thing started. Help, please.

  Hello

  It of very strange that the laptop switches mode standby during the work on this.
  Anyway, you can try this way:
  Disconnect the power adapter and remove the battery from the laptop and wait several times. It's not easy to tell how long to wait but wait 10-15 minutes

  Replace the battery in the notebook, and then connect the power adapter. Try turning on the laptop computer.

  To my knowledge, this is a common procedure if such question comes on the laptop.

• Cannot start by Satellite L850 - no boot device - please reboot

  Hi, can you help me?

  I have a toshiba Satellite, win 8, and when I try to start it it shows the message 'check' media (fail) and then shows "no boot device - please restart."

  How can I solve this problem?

  Unfortunately for these questions there is not some sort of magic bullet. Start your laptop and press F12 to get into the boot menu. If it works check if there is the option to enter setup. Choose this move down arrow and press ENTER.

  If it works, you will see the BIOS settings. On the first page (HAND), check if the HARD drive is listed and recognized correctly.
  In any case, use F9 and BIOS to the default settings. After doing this use F10 to save and exit.
  Check again please. If the same thing happen over and over again I fear you have professional m need help with this.

  What model of laptop do you have exactly?

• Cannot start the Satellite P300-1FN - nothing happens

  Hi all

  I have recently reinstalled windows 7 on my Satellite P300-1FN and after a few minor problems, it was working fine.
  I blocked some drivers and updates, then it prompted me to restart.

  I turned it off and left while I had lunch, then tried to start and nothing happened.
  I mean nothing, not even the power led comes on. I put the battery in which I know has at least half a load and nothing.

  The fuse, still nothing changed. What is everything?
  It is quite dead.

  Any help appreciated.

  G

  > I mean nothing, not even the power led lights up.
  Sounds not good man

  Sounds like the motherboard or CPU problem because no s lights are on.

  But try this;
  Unplug the power adapter, remove the battery, wait some time (2-4 hours) and reconnect the two parts.
  Check if you could power the unit in place.

  If this is not possible then I would recommend contacting a professional technician to ASP.

  Sorry, but that's all I can suggest

• Cannot start my Satellite A300

  Hello!

  I have a problem. I hope someone can help.

  My laptop does not start. Whenever I turn it on, it displays this message saying: "your computer was unable to start.
  Then it will run Startup Repair... and so far, the Startup Repair still works but nothing happens... it s been running for 2 hours now...
  Can anyone help? Do I have to reformat my laptop? I hope not...

  Satellite A300
  Windows Vista Premium

  Hello

  Disconnect the power adapter and remove the battery. After 10 minutes, connect the AC adapter / CC and try to start it again.
  You can enter the BIOS settings?
  See Toshiba welcome screen?

• Cannot start my Satellite Pro C70-A-159

  Hello

  My laptop Satellite Pro is only a few months, all of a sudden it stopped. And it does not turn.
  No display after you press the power button. Machine is fully charged. Charger is fine. Machine fell still warm after passing on. Is - this problem of fan?

  I bought from the United Kingdom. But currently now out of the country. May claim the guarantee. Is it possible to get the international warranty?
  Thank you

  Unplug the power plug, remove the battery and press the power button for 20 seconds. After having done that connect the power supply only and try to restart your laptop.

  What happens when you do this?
  Is there a reaction?