Cannot start my Satellite P20 - "session3_initialization_failed".

Similar Questions

• Cannot start the satellite M35X

  Hi all.

  Cannot start my Satellite.
  When I push the power button, it turns on, the blue led is ok but the HDD led blinks 1 or 2 times or it happened when it is not clear at all and put the laptop off, but the power button remains lit.

  However, from time to time, it starts up, shuts down load the XP but after 1 minute.

  I have reinstaled recently the WinXP, and I did a bios update. Before that, the laptop didn't have this behavior, however, the XP raported me that the hard drive is faulty.
  I figured it is something related to the HARD drive.
  What should I do?

  How can I be sure that the HARD disk is wrong?

  Hi mate,

  If your HARD drive has bad sectors, you must exchange it ;)

  For example before doing this, you can check for bad sectors using specific diagnostic tools HDD as Drive Fitness Test:
  http://www.HitachiGST.com/HDD/support/download.htm#DFT
  Here, you can download an image file to create a boot disk. Then boot from it and to start the test, it is quite easy! ;)

  If your HARD drive is faulty, this tool should recognize this.

• Cannot start my satellite 4060 XCDT mode standby

  I can't start my satellite 4060 XCDT from sleep, from his sleep, I have to reboot for it to restart, sometimes, he'll leave the day before, but mostly he used, I tried updating the BIOS, nothing works!

  Hello
  often there is a problem with installed programs that Don t 'like' Mode standby or Hibernate.

  This could be for example downloadable, firewalls, Systemchecking programs.

  What additional hardware. Do you have the connected equipment that Don t supports sleep mode, such as PCMCIA cards for example?

  Good bye

• Cannot start up satellite M40 136

  Hello

  I have a Satellite M40 136 2.5 years old. I used it yesterday and then closed the lid then it shut down as usual. About half an hour later, I realized that I had to check a file so I opened the lid and normally he would back automatically, but it didn't. I pressed the button, which is surrounded by an LED, I think than orange means it's pending otherwise it is blue.

  When I pressed on it, he showed the light orange for about 2 seconds and then nothing for 5 seconds and then blue for 5 seconds. For these last 5 seconds the machine looks like it, he's trying to start, but then it off immediately. I tried and tried again, but it does the same thing. I tried to use the power cable. I managed to put the recovery DVDs during the 5 seconds, the blue light is on and I press the 'C' button, but it does not work.

  Does anyone have an idea on what I can do to get the machine to boot?

  Nicky

  Plug the laptop! Remove the battery and the AC adapter.
  Then wait about 30 min, then insert the battery and connect the AC to the laptop.
  Check if the mobile feed.

  If this isn't the case,-> contact ASP (certified partner) in your country, because the strange behavior of cell phone looks like a serious problem that cannot be solved by a common user!

  Good bye

• Cannot start my Satellite A110-275

  Hello

  I had one laptop Satellite A110-275. After the first days, when I bought someone spilled a glass of water. I send the laptop on a center here in Canada they have change the motherboard. Laptop worked for several months and a few weeks ago are starting to make me a problem such as:
  I start it and everything seems ok all lights are blue lit, I hear when the beginning of the video card fan and nothing appears on the screen.

  In the past after a few opening and closing laptop computer started but now its saying DEAD leds.
  Could be the processor or even once the motherboard? I already changed the 2 GB memory and nothing.
  Could someone help me with some ideas?
  Thanks in advance.

  Processor A110 - 275 Intel Core Duo T2400 satellite clocked at 1.83 GHz 2 GB of 533 MHz DDR2
  Thank you

  Hello Marina

  Please don't get me wrong, but I don't think there is that you can only do about it.
  Of course, there is a serious hardware problem, probably with the motherboard. I don't know which component is troublemaker, but if your computer laptop doesn't react at all, it can be electronic power supply.

  It may be the CPU. It may be the motherboard, but you must understand that it is not possible to provide an accurate diagnosis on this path. What you need is a professional help. Laptop must be controlled by diagnostic tools and it can be done in only authorized service. Contact them and explain the situation.

• Cannot start the Satellite Pro A120SE-180

  Support the necessary computer startup.

  I have a Satellite Pro A120SE-180. I took out the RAM to check how much I had. Then, I opened the battery compartment without thinking about the consequences. Now I get just a power indicator and that it will not start at all.

  I can't open the disk drive or get any life out of it. I was running an upgrade of Vista, which was available as a cheap option when I bought with Windows XP.

  Hi Rob,

  What might have happened, is that the operating system and a hard drive can have erased himself when the RAM and battery have been removed at the same time!

  The only way to fix and doing things is again to send it to a Toshiba service center and get them to look! Also, do not upgrade to Vista - I'm using XP and it seems to do the job the way it was supposed to! I intend to switch to another Satellite Pro, an A300 running Vista, but I will look for someone who can replace XP on it!

  Joe

• Cannot start by Satellite A10-S703 from sleep mode

  My boss gave me a Satellite A10-S703 running windows XP. I was tooling autour, when suddenly the computer is in sleep mode (LED flashes orange). I tried pressing the power button, but nothing happens. What should I do? I am seriously at the end of the roll and will be in hot water if I can't get the thing started. Help, please.

  Hello

  It of very strange that the laptop switches mode standby during the work on this.
  Anyway, you can try this way:
  Disconnect the power adapter and remove the battery from the laptop and wait several times. It's not easy to tell how long to wait but wait 10-15 minutes

  Replace the battery in the notebook, and then connect the power adapter. Try turning on the laptop computer.

  To my knowledge, this is a common procedure if such question comes on the laptop.

• Cannot start by Satellite L850 - no boot device - please reboot

  Hi, can you help me?

  I have a toshiba Satellite, win 8, and when I try to start it it shows the message 'check' media (fail) and then shows "no boot device - please restart."

  How can I solve this problem?

  Unfortunately for these questions there is not some sort of magic bullet. Start your laptop and press F12 to get into the boot menu. If it works check if there is the option to enter setup. Choose this move down arrow and press ENTER.

  If it works, you will see the BIOS settings. On the first page (HAND), check if the HARD drive is listed and recognized correctly.
  In any case, use F9 and BIOS to the default settings. After doing this use F10 to save and exit.
  Check again please. If the same thing happen over and over again I fear you have professional m need help with this.

  What model of laptop do you have exactly?

• Cannot start the Satellite P300-1FN - nothing happens

  Hi all

  I have recently reinstalled windows 7 on my Satellite P300-1FN and after a few minor problems, it was working fine.
  I blocked some drivers and updates, then it prompted me to restart.

  I turned it off and left while I had lunch, then tried to start and nothing happened.
  I mean nothing, not even the power led comes on. I put the battery in which I know has at least half a load and nothing.

  The fuse, still nothing changed. What is everything?
  It is quite dead.

  Any help appreciated.

  G

  > I mean nothing, not even the power led lights up.
  Sounds not good man

  Sounds like the motherboard or CPU problem because no s lights are on.

  But try this;
  Unplug the power adapter, remove the battery, wait some time (2-4 hours) and reconnect the two parts.
  Check if you could power the unit in place.

  If this is not possible then I would recommend contacting a professional technician to ASP.

  Sorry, but that's all I can suggest

• Cannot start my Satellite A300

  Hello!

  I have a problem. I hope someone can help.

  My laptop does not start. Whenever I turn it on, it displays this message saying: "your computer was unable to start.
  Then it will run Startup Repair... and so far, the Startup Repair still works but nothing happens... it s been running for 2 hours now...
  Can anyone help? Do I have to reformat my laptop? I hope not...

  Satellite A300
  Windows Vista Premium

  Hello

  Disconnect the power adapter and remove the battery. After 10 minutes, connect the AC adapter / CC and try to start it again.
  You can enter the BIOS settings?
  See Toshiba welcome screen?

• Cannot start my Satellite Pro C70-A-159

  Hello

  My laptop Satellite Pro is only a few months, all of a sudden it stopped. And it does not turn.
  No display after you press the power button. Machine is fully charged. Charger is fine. Machine fell still warm after passing on. Is - this problem of fan?

  I bought from the United Kingdom. But currently now out of the country. May claim the guarantee. Is it possible to get the international warranty?
  Thank you

  Unplug the power plug, remove the battery and press the power button for 20 seconds. After having done that connect the power supply only and try to restart your laptop.

  What happens when you do this?
  Is there a reaction?

• Cannot start the satellite a60 atheros ar5004g wireless code 10 adapter

  I have a satellite s-156 a60 with an atheros ar5004g wireless network adapter... When I updated the driver code 10 appearaed in Device Manager, I drove back to the old driver, with the same results.

  I then performed a new installation with the recovery dvd, with the same disappointing results.

  When I bought the laptop the only software I received was the dvd restoration.

  I downloaded other pilots, with the same results.

  suggestions, passing the wifi turn on light is orange... Thank you

  Hello stevek

  I'm not 100% sure but I think that your device is not ready WiFi and you can not use wireless Mini PCI cards. Is wireless antenna available?

• Cannot start the Satellite L730

  Hello

  I just bought a new laptop (satellite L730) and according to the instructions, I tried to follow the 6 steps of quick installation included in the instructions.

  After having turned it on, was asked to choose a 32 bit or 64 bit OS (I chose 64-bit as advised), I then followed the guests and answered all the instructions on the screen.
  a message _ + _ + "the computer has encountered an unexpected error... to install windows click ok to restart the computer, and then run the Setup again.

  I've been by clicking on 'OK' for the last 3 hours... and nothing has changed, I have not yet reached the stage to choose the location or the language of the keyboard etc...
  Help! :)

  Hello

  You should stop the laptop and try to reinstall the OS once more.
  Press the power button / stop, then press F8 which will allow the advanced boot menu.
  Here you must choose to fix my computer.
  Then choose HARD drive recovery and follow the instructions on the screen.

  Good luck

• After that the BIOS update cannot start my Satellite L305-S5885

  Last night I've updated the BIOS of my laptop, but when the completed BIOS flashing, she restarted Windows. The machine could not start. The CD/DVD device go into a cycle with a yellow light and the screen does not appear anything. Can someone help me solve this problem.

  Old Bios: v1.40
  New Bios: v1.50
  OS: Windows XP with SP3

  I can't use the CD/DVD device to start with a Win PE.

  Thank you

  Hello!

  I think that the BIOS was not correctly because your computer laptop doesn't start up again.
  In this case, you can make t a lot of.

  Try this: remove the battery and the AC adapter, wait up to 1 hour and then connect the battery and AC adapter. Try it again and hope it works.

  If this does not work, you should contact a local ASP. In the worst cases, the motherboard must be exchanged :(

  Welcome them

• Cannot start CD satellite 1900 102

  Hello
  I have a problem with booting from CD after I restarted the laptop.
  I want to install new XP system and format the drive.
  I put properties in the BIOS to boot from CD Rom, with professional XP CD is bootable. CD/DVD-Rom is normally work.
  What should I do?
  Thanks for the reply
  Andrew

  Hello

  Put the CD in the DVD-ROM, turn the unit by pressing the C key, then press the power button and hold down for a few seconds. On this way, the unit should start device DVD.

  Try it.