Cannot start new iMovie on iPad Air project

Similar Questions

• Cannot start new disc

  I'm upgrading from the internal drive in an early 2011 13 "MC700LL/A macbook pro.

  1. I bought a new HGST Travelstar 7 K 1000 1 TB drive and put in a disk external usb dock. I then formatted with extended (journaled) as Mac OS disk with GUID utility.

  2. I then used Carbon Copy Cloner to clone the old internal system disk to the new disk.

  3. He cloned without problem and I can always boot from the new drive while it is in the external case.

  4. I installed the new internal drive and now it won't start. It turns right on the gray apple screen.

  I can boot into recovery and check the drive with disk utility. But if I try to select it as a boot disk, that it says that it cannot be blessed. If I put the old drive back in there fine boots. If I put the new drive in the external enclosure usb, it starts very well. I also tried to reset the PRAM

  I found people with similar problems online and often arrange it a new cable from hard drive. But they often try to install an SSD (which I think is more sensitive to bad hard drive cables), and they also seem to have a file system with a line through it. I get the circle of rotation and want to install a regular reader. It starts very well inside my old drive.

  Any ideas on why the drive can't be blessed and boot? I have spent a lot of time on this and would appreciate all the advice really. Thank you.

  Hi Seggeth,

  Thank you for using communities Support from Apple!

  I understand that your new drive is not start as expected when you try to select it as your startup disk. To begin troubleshooting, I would suggest reinstalling the new disk and reinstalling OS X on it.

  How to reinstall OS X on your Mac - Apple Support

  After installation of OS X, try to select it as your diskette of starting again.

  Best!

• Uninstalled and reinstalled Firefox new, because the old version was crashing / "not responding." now cannot start new version.

  I have a desktop Windows 7 Home Premium 64-bit. Was using a previous version of Firefox for a while but is has started to run slowly or occasionally crash or better yet show "program does not" or some this verbiage when I started the browser, so I decided to move to a new Firefox. I uninstalled the old version and installed a new one – and I can't start even the browser. The browser window opens with "Restore Session - Mozilla Firefox (not responding)"
  I don't use IE, but that's what I have to do the same after this issue; That's why I can't even look for ir help install the troubleshooting soft...
  Any help would be appreciated.

  Firefox reset function move your old folder settings on your desktop, inside a folder named old data from Firefox. Please keep this record for a few weeks in case you need to recover anything of him.

  If the reset does not help, there are two main variables remaining here: possible corruption in the settings (your profile folder) files that are reported after a reset and possible problems in your Firefox program folder.

  Create a new Firefox profile

  A new profile will be your plugins installed by system (for example, Flash) and extensions (e.g., security suite toolbars), but no themes, other extensions or other customizations. It will also have databases of completely fresh settings and cool a cache folder.

  Out of Firefox and start in the profile using Start Manager > Run (hold the Windows key press R):

  firefox.exe -P
  

  Do not delete anything here.

  Any time want to switch profiles, exit Firefox and return to this dialog box.

  Go ahead and click on the button to create a profile, give it a name such as Nov8 and ignore the possibility of changing the location of the folder. Then launch Firefox in the new profile that you have created.

  Until you return to the profile and start-up Manager in your regular profile, your desktop shortcut should launch the new profile.

  Other than not having your settings, it works normally?

  Note: When you return to the Profile Manager, you might be tempted to use the button Delete a profile on your new test profile. It's a little too easy to accidentally delete your 'real' profile, so I recommend you to resist the temptation. If you don't want to clean up later, I suggest to make a backup of all your profiles first in case something go wrong.

  You can replace the Firefox program files without disturbing your settings by using this clean reinstall procedure:

  (1) download a fresh Installer for Firefox 33 of https://www.mozilla.org/firefox/all/ in an ideal location. (Scroll down your preferred language).

  (2) as appropriate, close Firefox or make sure there is full compliance in the Task Manager.

  (3) to rename the folder (Windows 64-bit folder names)

  C:\Program Files (x86)\Mozilla Firefox
  

  TO

  C:\Program Files (x86)\OldFirefox
  

  (4) run the installer you downloaded in the #1. It should automatically connect to your existing settings.

  It runs?

  Note: Some plugins recently installed can exist only in this OldFirefox file. If it is missing something essential, present in these files:

  • C:\Program Files (x 86) \OldFirefox\Plugins
  • C:\Program Files (x 86) \OldFirefox\browser\plugins

• Cannot create new stunts on SDK Gold projects

  When I try to create a new project of Cascades in Momentics, everything goes fine until I hit 'Finish' and I get the following message:

  Error

  "com.qnx.tools.bbt.appdescriptor.Configuration.getid () Ljava/lang/String;"

  and an ok"" button.

  Help!

  It is the first time I created a new project since switching to the SDK Gold, and I am running on 8 to win.

  A complete reinstallation seems to have made disappear.

  BotR what was causing it?

• Satellite U400-15E - cannot start new USB HDD

  Hello.

  Recently a bought a WD My Book external with 3TeraByte to use with my Satellite U400-15E. I can use inside Windows 7 Ultimate without problem. But if I try to boot from it (by pressing the F12 key), the BIOS does not even see the drive.

  Is it because Toshiba does not use Unified Extensible Firmware Interface (UEFI)? UEFI BIOS can overcome the limitation of 2.19 to in computers today easily, as explained in the following Western Digital document:
  [http://www.wdc.com/wdproducts/library/Flyer/ENG/2579-771501.pdf]

  This would allow me to use my new external drive to store an image Ghost drive HARD internal of my Toshiba for example. I mean 3 TB and more capacity is a reality today. When Toshiba updates their UEFI BIOS support?

  Material used:
  Toshiba Satellite U400-15E (BIOS v5.00 10/26/2010)
  Western Digital My Book Essential 3TeraByte - Firmware v1.014 (USB 3.0 interface)
  MS Windows 7 Ultimate - 32 bit version

  Thank you

  Hello

  Satellite U400 supports devices to boot according to the user manual:
  USB FLOPPY DRIVE
  HARD drive primary school
  Optical devices
  Network (LAN)

  If the USB drives are not supported.

  But you're absolutely right Re: 3 to and a larger capacity is reality today, but Satellite U400 is older model laptop and not newer ;)

• Cannot connect to iTunes Store on new iPad Air

  Try buying an iBook.  Keep being told that I can't connect to iTunes store with my new iPad Air.  In addition, my security questions are not accepted. Advice?

  The steps detailed here to try to see if they help you:

  If you cannot connect to the iTunes Store - Apple Support

• Cannot start/open new Premiere Pro trial - error flag reading - on demand could not start properly _ 0c000001d click OK to close the application

  Dear Forums

  Cannot start/open new Premiere Pro trial - error flag reading - on demand could not start properly _ 0c000001d click OK to close the application

  * Also, I sent my first question 20 minutes ago, not yet approved? Your return indicated "approved" e-mail, * why do I not see my question below still displayed? >

  The members of the Forum Pro first - Hello
  

  
  

  Can someone out there describe in simple basic procedure, how a first time user start using Premiere Pro to the layer just a moving figure video of 5 minutes (a friend aerial artist model with white moving belt in silk on a rest mainly black background layer and a change to a night sky stars panorama I photographed previously?)

  I know that this can easily be done, I have worked in thousands of still images with creative cloud for previous years, but not yet in video in Premiere Pro, so thanks for any advice.

  I enclose the actual video that I use and some samples of the fields of the night sky that I photographed recently for ideas

  I intend to make possibly more elaborate, but for now if anyone of you could just show the basic commands and menus/menus to start to do it simply and quickly. Maybe how to most later convert it tone black & white or sepia. The ideas here is to recreate a sequence modern suite of familiar German Film, wings of desire. Perhaps also a progression in the future to create an effect of the night sky very slowly turning into one layer background behind the main façade first video layer in normal movement. Then maybe a little further - how to adjust the speed of the front to a path layer more slow half price while keeping the substantive motion, the original speed. (* although I realize that I didn't do in 64 fps for the slow movement, I am not concerned about that and would actually welcome a light old world "flip effect framework" as if, in appearance of the films more former silent motion.) * In addition, possibly cutting on 'dead time' a few seconds at the beginning of the video and the 2nd or 3rd time for a few seconds of this unexpected error, when the silk scarf fell on the camera lens (without changing the audio timeline?)

  * (I use Windows 7 on a Toshiba Satellite L555 - [only RAM 4 MB. rates], 2009)

  * Video sample >

  Sarah Seiler Aerial - camera Check-An Unedited manifesto-Dec 16 2015 - YouTube

  * Background samples >

  w-left-west-frames-with-earlier_sept-8_9-2015_1_stitch-mercator-projection-2a-titles-5000-pxl-b_galaxies-at-right-enlarged-5500-pxl http://www.dpreview.com/galleries/1579463287/photos/3374478/Trillium-Lake-Aurora-add-26-ne

  Comet Lovejoy Andromeda brand camera telescope DSC3857-1a-blue-light-increase-layer-Nov 20 2015: Mark Seibold: Galler...

  Larch Mtn Night Sky Sony NEX5R 5 Oct 2015_panorama point 2 b side of cropped rt 3000 pxl: Mark Seibold: galleries: digital...

  Cannon Beach Haystack Rock mamiya 55mm 25 2015_10_stitch_102 26 Aug frames Projection of Mercator Crop dark as he nu Fi...

  Trillium Lake Mount Hood Dark Night Sky Nov 10 2014_stitch a 5000 pxl f to fill 2: Mark Seibold: galleries: Digital P....

  Thanks so much for all the advice of one of you in the Adobe Premiere Pro forums,

  Mark E. Seibold, artist-astronomer, Portland Oregon

  Duplicate thread here: may describe in the simple basic procedure, how a first time user start using Premiere Pro to the layer just a moving figure video of 5 minutes (a model friend artist air with white passage belt mainly black silk )

  Thank you

  Regalo

• the application of air cannot detect new extra camera

  I made an office air - env. the problem is when I disconnected my usb camera and start the application of air. the application detects the cameras didn't exist with Camera.names.length = 2; and then I pluged an another usb camera and use the Camera.names.length to detect the new camera, but the result is always 2, not the camera 2 existed with the new added that the total is 3. then I close the application of air and start it again, this time, the camera.names.length is 3. Why? the application of air just cannot detect new extra camera? the only way that the air application can detect new extra camera is to restart the application?

  Flash player air flow also does not detect camera added during execution. It can detect if you remove the camera while you were capturing images from the camera. You can try to scan for camera has a timer and see if it detects then.

  There is also a not so documented flash.media.scanHardware () method, which should force a hardware scan. I have not used yet, so can't vouch for it.

• I bought ipad air 1 after that 2013 but can not get the pages for free. Numbers and imovie I can. IOS9 running at the moment. I have pages when I connect on icloud on my pc. Can I transfer iPad app, because it is not in the ILO purchased in itunes.

  Hi everyone, this is my first post, also help on the post would be appreciated.

  I bought ipad air 1 after that 2013 but can not get the pages for free. Numbers and imovie I can. IOS9 running at the moment. I have pages when I connect on icloud on my pc. Can I transfer iPad app, because it is not in the ILO purchased in itunes.

  Thanks in advance

  Newbie

  The only way to install an ipad app is through the app store.  PC or Mac software does not run on the ipad.  Search in the contacts link at the bottom right of this page.  Give apple a call.

  I guess is the icon for pages in icloud for storing documents pages.  At the same time, apple had a cloud based pages.  Not sure what happened to her.

  R

• On my new iPad Air 2, can not access my music library, syc'd from my Mac.

  Need help to find and play my music on my new iPad Air 2 library.  Synchronize from my Mac.  The icon of music on my iPad shows just a picture of a woman with headphones.

  Restart your iPad by following the instructions in the link below.

  Restart your iPhone, iPad or iPod touch - Apple Support

• Satellite Pro A10: New card wireless Atheros/Askey, but "this device cannot start" code 10

  Hello

  I have a Satellite Pro A10 and bought an internal pci wireless adapter. The following information is displayed on my card:

  Askey WLL3070-D4 (MOW)
  Atheros AR5BRB-43

  I installed the card, attached to the ariel and turned on the laptop... the switch at the front lights up now and Windows xp detects the new ethernet adapter. My problem is the following...

  Any driver I install (and Ive tried all the drivers of the first 20 + pages of yahoo/google Askey/Atheros etc.) the card installs very well but then in device manager has a yellow! next to him and says this device cannot start (code 10)

  I am really puzzled. I have little ram more to come in the next few days how I am installng Vista im hoping sort my problems, but someone has any ideas?

  I have not yet find a driver which specifically refers to the AR5BRB or the WLL3070-D4 model number.

  Does anyone have a location for a pilot, etc.?

  Thank you

  Hello

  I always use this page for WLan driver update:
  http://APS.toshiba-tro.de/WLAN/

  It is a Toshiba WLan driver portal and you will find all the necessary drivers for WLan

  Ciao

• We just synchronized all of our iPad Air information to our new iPad pro... How are we going to stop future synchronization of two ipads

  We just sync all our information our IPad air on our new IPad Pro... now... How do we stop the synchronization of the iPad 2?

  IF you use the same ID accounts iCloud on both devices and Apple, they will remain synchronized unless you disable features in iCloud you do not want to keep in sync, like iCloud Drive, iCloud, library, photos, Safari, Notes flow, etc.

  Why would you not keep devices in sync? If you plan on selling iPad 2 Air, want to give it or set it up as a new device of nrand, take a look at this.

  What to do before you sell or give away your iPhone, iPad or iPod touch - Apple Support

• When I try to open my file saved PREL - Adobe Premier elements 11, it starts as usual and then "the project appears to be damaged, it cannot be opened. But when I try to open the same file (but not update) of 'Adobe Premiere éléments Auto-Save' it opens

  When I try to open my file saved PREL - Adobe Premier elements 11, it starts as usual and then "the project appears to be damaged, it cannot be opened. But when I try to open the same file (but not update) of 'Adobe Premiere éléments Auto-Save' it opens as usual.  What can I do to be able to open it?

  Good luck to the project is corrupted.

  Be happy, you have an auto save, even if you've lost some work.

• Cannot create new projects in RoboHelp 7 HTML

  When I try to create a new project in RoboHelp HTML 7, the Type of projects field is empty on the new tab in the new project dialog box. I just bought this product after using the trial version for 30 days. I can open the projects I created before, but cannot create new projects. Help! I need it now!

  OK, this problem is solved, the problem was of RoboSource Control 3.1. I realized that I had installed RoboSource Control 3.1 during my trial installation (the installation option it is checked by default). By running again the trial download (thank God I taped it), I was able to uninstall RoboSource Control 3.1. (I could not uninstall by using the Tech Comm Suite installer or the Add/Remove feature in the control panel)

  Then I ran the installation Tech Comm Suite and reinstalled RoboHelp 7 (without installation of RoboSource Control 3.1).

  RoboHelp 7 HTML now works again. Note that only the HTML version has been screwed upward - Word version ran OK, I just don't need.

  Finally, I just want to say, Support technique Adobe * SUCKS *. After spending half an hour on my first call on September 26, "Ken" directed me to the web page of Adobe's Support and told me to enter my problem myself - thanks for nothing, Ken. He promised a tour of 24 hours around, which didn't happen.

  When I called back on 29 September, I lost another hour with Natasha and Sam, that had run me CSClean, which wiped out my registry for Acrobat and Photoshop entries, forcing a reinstallation of these products. Of course, who did not help me at all.

  Adobe, please stop outsource your Support to the India - these guys don't know anything!

  The answers to this question on the "Customer Portal" has been slow, indifferent and unhelpful. Shame on them!

  I write this fix this problem on this Forum, so the next poor slob may be able to solve their problem by themselves like I did, because the Technical Support will not help you!

• Performance wise, it is sensible to switch to iPad Air starting from an iPad 3?

  Hello world

  I'm looking for a replacement for the iPad 3 (Wifi, 32GB) that my family uses for simple tasks (surfing, netflix, e-mail).

  I thought an Air 32 GB Wifi iPad, which should be much faster. But now, I saw that this model has only 1 GB of RAM, just like the iPad 3.

  Do you still think the air is considerably faster than the 3? The 3 is really slow behavin now with iOS 9 and not so much fun to use anymore.

  It would be good to hear your experiences.

  best,

  GEB

  The first generation iPad Air has a faster, more powerful CPU A7.

  The GPU more powerful and faster, too, that the iPad 3.

  It is also lighter.

  Those really has the only differences in the important features from the iPad 3.