Cannot start OM Server Administrator (entry point not found)

Similar Questions

• VISTA computer does not start until "STOP: 0xc0000139 {Entry Point not found}".

  Original title: computer VISTA will not start

  I get this error when you try to start my vista 32 bit

  blue screen with:

  Stop c0000139 (entry point not found)
  Wcsncpy_s procedure entry point could not be located in the dynamic link library ntdll.dll.

  tried to start in every mood and nothing works. Help, please

  Hi Ad-HocHelp,

  (1) since when are you facing this problem?

  (2) remember to make changes to the computer before this problem?

  Step 1: Disconnect all external devices (printers, scanner, USB (universal serial bus) readers, etc...) Except the keyboard and mouse and then start.

  If this solves the problem, then add back devices at a time until you discover the piece of hardware causing the issue.  Then get any drivers\software update for the device.

  Step 2: Run the Startup Repair tool, follow the steps mentioned in the link below to access the system recovery tools.
  How to access the System Recovery Options menu?

  Run the tool to restart system as shown in the link below
  How to use Startup Repair?

  Thanks and greetings
  Ajay K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Cannot open iTunes or other things. iTunes.exe - Entry Point not found error

  Original title: iTunes.exe - Entry Point not found

  iTunes.exe - Entry Point not found

  The procedure entry point
  AVCFPlayerAppliesMediaSelectionCriteriaAutomaticallyKey is not found in the AVFoundationCF.dll dynamic link library.

  I don't understand why that keeps popping up whenever I'm going to try and open iTunes. Then he told me that iTunes is not installed correctly, even after you uninstall it and install and it installed successfully. It is really starting to make me angry. I don't know what I did. I was working with my iPod Classic moms and it simply does not work so I tried hard so he can. I think I could have managed to get rid of something by accident. Can someone please help please?
   
   
  Discussions were merged.
  Deleted duplicate.
   

  Hello

  Uninstall everything according to the instructions from Apple:

  «Remove and reinstall iTunes, QuickTime, and other software components for Windows Vista or Windows 7»

  http://support.Apple.com/kb/HT1923

  It is also the same list of what to remove what is in the link above from Apple:

  http://pcsupport.about.com/od/findbyerrormessage/a/MSVCR80-DLL-not-found-missing-error.htm

  Or try this program to remove it:

  http://www.revouninstaller.com/revo_uninstaller_free_download.html

  Then, download and save the iTunes on the desktop > then right click > select run as administrator to install.

  If the advice already given does not, please contact Apple for assistance.

  "Not to install iTunes or QuickTime for Windows"

  http://support.Apple.com/kb/HT1926

  "iTunes support-how to use iTunes.

  http://www.Apple.com/support/iTunes/

  "Contact iTunes Support.

  http://www.Apple.com/support/iTunes/contact/

  Or ask in the community Apple iTunes:

  https://discussions.Apple.com/community/iTunes

  See you soon.

• -Pop-up message error when I start my computer: "TVAgent.exe - Entry Point not found".

  When I start my computer, the first message when I see my desktop is a pop up that says "TVAgent.exe - entry not found.» The procedure entry point not found PowerReadACValues in the dynamic library POWRPROF.dll. "I try to close it and it appears in the same as spot 10 times and then finally I can close it and it will not reappear. I tried a full sweep of the computer with Norton and it did not come with anything. All my programs and all seem to work fine right after, but I fear that there is something wrong. I am running Windows Vista.

  Hi Csiew42,

  Thank you for visiting Microsoft Answers.

  ·         Which version of Windows Vista is installed on your computer?
  ·         Remember to make changes to the computer recently?
  ·         Who is the manufacturer of your computer?

  I suggest to perform the clean boot and check if you get the error again. Clean boot will start Windows Vista by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  The following link has steps showing how to perform the clean boot: http://support.microsoft.com/kb/929135

  (1) perform the clean boot (check the link to perform the clean boot).

  (2) enable half the services.

  (3) determine if the problem comes back.

  (4) enable half of the startup items.

  (5) determine if the problem comes back.

  (6) repeat the steps above until you discover which program or service is causing the problem.

  After you determine the startup item or the service that is causing the problem, contact the manufacturer of the program to determine if the problem can be solved. Or, run the System Configuration utility, and then click to clear the check box of the element of the problem.

  Note: Please make sure that the computer is configured to start as usual according to step 7 of the article: how to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7: http://support.microsoft.com/kb/929135

  Hope the helps of information. Please post back and we do know.

  Kind regards
  Joel S

• .exe error] is not found the procedure entry point AddAtomW Entry Point not found in dynamic bindings KERNEL32 library. DLL when I try to run any program. I have

  Original title: [ProgramName] .exe Entry Point not found

  I get this message: the point procedure entry AddAtomW could not be found in dynamic bindings KERNEL32 library. DLL when I try to run any program. I don't know what to do. Help please!

  Hello

  1. did you of recent changes on the computer?

  Method 1:
   
  It is possible that some third-party programs installed on the computer is causing the problem.
  I suggest that you put the computer in a clean boot state and check if it helps.
  To help resolve the error and other messages, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.
   
  See the link below to learn more about how to clean boot.
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353
   
  Reset the computer to start as usual
  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
  (a) click Start, type msconfig in the search box and press ENTER.
  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.
  (c) under the general tab, click the Normal startup option, and then click OK.
  (d) when you are prompted to restart the computer, click on restart.

  Method 2:

  Put your boot system helps determine if third-party applications or startup items are causing the problem. If so, you need to maybe contact the manufacturer of the program for updates or uninstall and reinstall the program.

  See the following article in the Microsoft KB for more information on how to solve a problem by performing a clean boot in Windows Vista or Windows 7:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135

  Note: after a repair, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

• Satellite P300: Error BSOD STOP: c0000139 {entry point not found}

  I had this error a few weeks on my Toshiba P300.
  When I start my laptop it appears a blue screen with an error for a fraction of a second:

  STOP: c0000139 {entry point not found}
  The procedure entry point ntoskrnl. ExiAcquireFastMutex is not found in the library of dynamic links Hal.dll.

  Then normal startup of Windows Vista.
  I get this error when I start the computer from the Hibernate mode. What does this error mean?

  I also have problems with my built-in webcam. I get the message: "locked by another application." I already reinstalled the software I downloaded from the site, but that did not help. The error has something to do with the webcam this doenst work properly?

  I put t know what can be the problem, but you must use restore system and OS rollback to an earlier time before this error message.

  Subject of webcam, please visit http://forums.computers.toshiba-europe.com/forums/thread.jspa?messageID=131308

• Explorer.exe - Entry Point not found

  Last week I update my Lenovo G510 Windows 8.1.

  Yesterday, I've updated following three updates:

  1 - Conexant - Audio - Conexant SmartAudio HD
  2 Microsoft Silverlight (KB2977218)
  3 - Qualcomm Atheros Communications - Bluetooth - Qualcomm-Atheros Bluetooth 4.0 AR3012 controller

  After that when I restart windows message appears. It seemed not every time, but it often appears when I start computer.

  "explorer.exe - Entry Point not found".

  

  Thanks ColonelONeill

  After week last updated to Microsoft, this error is not after the start.

• NImax.exe entry point not found TDMS_GetDataValueEx in cviTDMS.dll

  I have a remote PXI-8108 and I am trying to create a task in MAX.  I have no other task, because this is my first attempt to create a.  The following sequence is executed on the remote system: left click on the PXI-6713 under ' devices OR-DAQmx '--> the task of creating--> trigger signal--> analog output--> voltage--> ao0--> name by default 'MyVoltageOutTask'--> click on "Finish".

  An entry Point not found error called "NIMax.exe -" window appears with the following message: the TDMS_GetDataValuesEx procedure entry point could not be located in the dynamic link library cviTDMS.dll.

  The only option is to click on 'OK', date at which the box reappears constantly.  the only way to get rid of it is to kill MAX in the windows Task Manager.  When I restart MAX, district data remote system has broken below task and clicking on it locks up program (a need to kill another in windows Task Manager).  The only way to get rid of it is to reset the distance the DAQmx system setup and start again.

  I reinstalled NIDAQ 8.9.0, reset the configuration of the remote system in MAX, set day/reinstall all the software on the remote system (so that it matches the host system).  don't know what else to try.  I think that this should be a basic step: I did a lot of times with features simulated on a host system.  Not sure why the remote system gives me problems.

  I was able to do this on a controller of 8196 DAQmx 9.0 on the regulator and my computer having 8.9.5 smoothly.  Upgrade to 8.9.5 9.0 or even should update MAX and hopefully get rid of what you see.  You are right that the host and the controller must have the same driver version so make sure that you update the two together.  It is quite strange that the error is the link to a DLL of LabWindows/CVI.  Do you use a RT CVI on the controller?

• hpqtra08.exe - Entry Point not found error. The Get procedure entry point Module F < [not found in KERNEL32.dll dynamic link library.

  Original title: hpqtra08.exe - Entry Point not found.  The Get procedure entry point Module F<[ could="" not="" be="" located="" in="" the="" dynamic="" link="" library="">

  hpqtra08.exe - Entry Point not found.  The Get procedure entry point Module F<[ could="" not="" be="" located="" in="" the="" dynamic="" link="" library="">

  (This keeps popping up on my screen and I don't know how to get rid of it. Can you please tell me what to do?)

  Hello

  ·         When exactly do you get this error message?

  ·         Did you of recent changes to the computer before this problem?

  ·         You are able to boot to the desktop?

  You can follow these suggestions:

  Method 1:

  If the previous step fails, follow these steps:

  a. restart the computer in safe mode and disable the HP service and check if the problem occurs. Follow the steps described in the following steps:

  b. restart your computer and start pressing F8 on your keyboard. On a computer that is configured to start to multiple operating systems, you can press the F8 key when the Boot Menu appears.

  c. Select an option when the Windows Advanced Options menu appears, and press ENTER.

  d. Click Start and run, type msconfig, and then click OK.

  e. the system dialog Configuration utility appears.

  f. click on the Services tab.

  g. Click to select the check box Services HP Digital Imaging Monitor or hpqtra08.exe.

  h. click OK.

  i. When you are prompted, click on restart to restart the computer.

  j. after reboot check if the problem occurs.

  Method 2:

  If the C:\Program Files, download and run the Microsoft of the link Security Scanner to make sure that your computer is not infected with the virus:

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: the Microsoft Safety Scanner expires 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.

• Get FL.exe - Entry Point not found 'point of entry procedure for NtAlpcSendWaitReceivePort not found in the dynamic link library ntdll.dll' error at boot fruity loops.

  Original title: ntdll.dll error at boot fruity loops.

  get FL.exe - Entry Point not found 'point of entry procedure for NtAlpcSendWaitReceivePort not found in the dynamic link library ntdll.dll' error when I try to start fruity loops after installing Kies from samsung for the new phone. How can I fix this error? Help, please. Thanks in advance! :)

  Hello
  I suggest you contact support FL. I couldn't find all of the resources for this program.
  Eddie B.

• the apsGetReady entry point not found in the library of links dynamic wlanapi.dll

  What is apsGetReady?     Do I need?   If yes how can I do?  If this is not the case, how can I remove the window error message.

  """""""""""""""""""""""""""""""""""""""""""'''

  Wzcsldr2.exe found entry point

  the apsGetReady entry point not found in the library of links dynamic wlanapi.dll

  """"""""""""""""""""""""""""""""""""""""""""""""

  Hello

  1. When you receive this error message?
  2. you did it before the issue of any material changes or software?
  3. what service pack and antivirus are installed on your system?
  4. What is the brand and model of the router you are using to connect to the Internet/network

  5 are you facing problems to connect to the Internet or to the network?

  6. are you using any third-party wireless / network in the System Manager software?

  Method 1:
  

  Step 1: Boot your system in 'Safe Mode with networking' and check if you get the same error message. Then review the article mentioned below to do so:
  A description of the start in Windows XP Mode options:
  http://support.Microsoft.com/kb/315222

  Step 2: If you receive any error in safe mode, please boot your system to the boot and see if the problem still occurs in this mode. Try now to the KB article to perform the clean boot:
  http://support.Microsoft.com/kb/310353
  Important: After you use the clean boot in order to solve your problem follow the steps in the "steps to configure Windows to use a Normal startup state" section to start your system in normal mode.

  Method 2: Please see Using D-Link, if you use D link router.
  http://www.Dlink.com/support/default.aspx

• Wzcsldr2.exe - Entry Point not found the procedure entry point apsGetReady cound not found in the library wlanapi.dll dynamics. apears after startup

  ---------------------------
  Wzcsldr2.exe - Entry Point not found
  ---------------------------
  The procedure entry point apsGetReady could not be found in the library of links dynamic wlanapi.dll.
  ---------------------------
  Ok
  ---------------------------

  Because the Microsoft Answers forum does not ask for any type of information system when a new question is asked so we don't know anything about your system.  Not knowing the basic information a problem prolongs the frustration and the agony of these issues.

  Maybe someday the dialog box 'ask a question' forums XP will ask these questions automatically when a new thread is started so I don't have to ask every time.  It might even be possible to solve a problem in a single response when enough information is provided.

  Thank you MS Answers, allowing the resolution of simple problems as frustrating and a lot of time as possible.

  Provide information on your system, the better you can:

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  The afflicted system has a working CD/DVD (internal or external) drive?

  You have a true bootable XP installation CD (it is not the same as any recovery CD provided with your system)?

  Do you see that you think not you should see and when you see it?

  If the system works, what do you think might have changed since the last time it did not work properly?

  Googling a bit (very little) reveals that the file wzcsldr2.exe or wzcsldr3.exe belongs to a kind of device from D-link wireless connected to your system.

  Fact that sound familiar and you have something like this installed?

  If Yes, then I would get the page Support D-Link and find the latest driver for any device you use and install it.  You may need to first uninstall your device running - I'm sure they must have instructions and tips for the procedure.

  They also have an active Support Forum where you can post your problem/question to see if people there can help you get there.  There is already some discussion in the forums about the problems you describe, but since we know absolutely nothing about your system, you should probably take it yourself.

  I found a few other ideas through Googling, but I don't like some of the ideas I've read and if you stuff worked before, what do you think has changed since the last time it worked correctly?  Did you update or reinstall your device from D-Link or drivers, lately?

• Savedump.exe - Entry Point not found

  Whenever I restart the system, I get the mentioned error message below;

  Savedump.exe - Entry Point not found

  The procedure entry point SymSetSymWithAddr64 could not be found in the dynamic library DBGHELP.dll

  Whenever I restart the system, I get the mentioned error message below;

  Savedump.exe - Entry Point not found

  The procedure entry point SymSetSymWithAddr64 could not be found in the dynamic library DBGHELP.dll

  First, click HERE and download DBGHELP.dll. Save the file to your desktop for convenience.  Click on start > run > paste the file path below into the box run > click ok.

  C:\Windows\System32

  Open the system32 folder. Minimize the folder to the system tray. Return to the file that you have downloaded and right click. Choose "copy". Now optimize the system32 folder. Right-click in the free space in the folder and choose Paste. If you are prompted to replace an existing copy click Yes. Restart the computer. The error should be gone.

  Note that the file download will expire after 3 days because I used the free version of filemail.com.

• NtrigApplet - unable to connect to the driver: failed to open device___TVAgent.exe - Entry Point not found the procedure entry point PowerReadACValue could not be found in the dynamic library POWRPROF.dll

  Hi all

  I have a HP TouchSmart tx2-1025dx Notebook PC Vista... I met 2 large pop-up windows that will not close & appear as soon as I turn on my computer gives me a time DIFFICULT to access anything whatsoever...

  They read as follows:

  NtrigApplet - unable to connect to the driver: failure to open the device

  TVAgent.exe - Entry Point not found the procedure point PowerReadACValue entry is not found in the dynamic library POWRPROF.dll

  CAN SOMEONE PLEASE HELP?
  THANK U :)

  Hi the apprentice 85,

  Remember to make changes to the computer before that happened?

  Looks like the problem is hardware or software related, I suggest you follow the below mentioned steps below to refine the question

  Step 1: Disconnect all external devices (printers, scanner, USB (universal serial bus) readers, etc...)  Except the keyboard and mouse and then start.

  If this solves the problem, then add back devices at a time until you discover the piece of hardware causing the issue.  Then get any drivers\software update for the device.

   

  Step 2: Put the computer to boot to determine which program is causing the problem

  Follow step 1 in the link below,

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  If everything works well after a clean boot, you can deduce that some third-party services are at the origin of the problem.

  Continue with the remaining steps to pin-point on the third party service.

  After find you the program that is causing the problem, you will have to perhaps to update or install a newer version of the program, if you rarely use that you should consider uninstalling the software.

  Important: n ' forget not the computer to start normal follow step 7 in the link.

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• At startup Vista, message of "SetPointUpdate - Entry Point not found".

  When Windows Vista is starting a box appears saying "SetPointUpdate - Entry Point not found".

  "The procedure entry point.

  ?? 0CFileName @ QAE@PAUHINSTANCE_@@PBD1@z couldn't be

  "Located in the dynamic link library KemUtil.dll.

  No idea what it is and how to fix?

  Thank you S

  * original title - SetPointUpdate.exe file *.

  When Windows Vista is starting a box appears saying "SetPointUpdate - Entry Point not found".

  "The procedure entry point.

  ?? 0CFileName @ QAE@PAUHINSTANCE_@@PBD1@z couldn't be

  "Located in the dynamic link library KemUtil.dll.

  No idea what it is and how to fix?

  Thank you S

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hé sjd991

  It would apear to be a logitech software

  read the information below

  http://www.Vistax64.com/Vista-General/49291-setpointupdate-exe.html

  http://www.bleepingcomputer.com/filedb/kemutil.dll-39750.html

  Walter, the time zone traveller