Cannot start service on local computer print spooler. Error 2 the system could not find the file specified. Please need file spoolsv.exe

Similar Questions

• Why is my computer is giving me an error message that says: "cannot start service on Local computer print spooler?

  Why is my computer is giving me an error message that says: "cannot start service on Local computer print spooler?

  When I tried to install my printer, I got an error 1068: the dependency service or group could start. I tried to go into my computer management to enable the print spooler service, but it gave me the same error message each time. What is the dependency service or group and how I put in place?

  Hi SimoneJ,

  Try to replace spoolsv.exe is located in C:\windows\system32 in C:\WINDOWS\ServicePackFiles\i386.

  Starting from printer spooler services (start-> Run-> services.msc-> printer spooler).

  I hope this helps.

• "Window cannot start service on Local computer print spooler. Error 1053: the service is not responding to demand launch or timely control. »

  I was going to print something my Professor downloaded on the school Web site, but after I click Enable editing button, the printer could not print. I mean, I could not find my printer. He went, and when I try to add a printer, it gave me an error message. I tried troubleshooting of the printer, and I got was that the print spooler was not working. I used office.com and tried to restart the print spooler in the services.msc, and he gave me this: "window on computer Local Print Spooler service cannot be started. Error 1053: the service is not responding to demand launch or timely control. "Help, please!

  Hello

  I suggest you try the steps from the following link:

  Spooler printer Forum FAQ:A error was received while trying to use printer
  http://social.technet.Microsoft.com/forums/en-us/w7itprohardware/thread/2b618d54-854A-4CFD-84F5-f069aad75a9f/

  Method 2
  I suggest you try the steps from the following link:

  Why can I not print?
  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print

• "Windows failed to start the service on Local computer print spooler. Error 1068: the dependency service or group could start. »

  I fiddle with my startup programs and now I have this error message: "Windows could not start service on Local computer print spooler.  Error 1068: the dependency service or group could start. "There is no printer listed everywhere and nothing works.

  Hi Jkoryzna,

  Thank you for choosing the Microsoft Answers forum.

  To solve the problem, fix the dependency for the spooler service information.

  Click Start, run and type the following text:

  CMD /K SC CONFIG SPOOLER DEPEND = RPCSS

  Alternatively, to achieve this by using the Registry Editor:

  Click Start, run and type Regedit.exe

  Navigate to the following branch

  HKEY_LOCAL_MACHINE-SYSTEM-CurrentControlSet-Services-spooler

  In the right pane, double-click the DependOnService value

  Delete existing data and then type RPCSS

  Close Regedit.exe.

  
  REGISTRY WARNING

  Change the settings of the REGISTRY can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the REGISTRY settings configuration can be solved. Changes to these settings are at your own risk.

  Navigate through the steps mentioned in the article below.
  Solve printing problems by resetting the print spooler.

  http://support.Microsoft.com/kb/2000007

  Let us know if this helps

  Concerning
  Anthony.

• Windows could not start the service on Local computer print spooler. Error 1053: The service did not demand launch or timely control.

  My printer was working fine and then today I received this message. Tried to strat as the spooler services but is unresponsive to start and I can stop him either. Heeeelp.

  Hi Slobodan,

  Thank you for posting.

  1 is connected to the domain of the computer?

  Please see the link.

  FIX: You receive an "error 1053: the service has failed to demand launch or control in a timely" error message when you stop or pause a managed Windows service

  http://support.Microsoft.com/kb/839174

• «Cannot start service on local computer windows firewall.» Error 1068: the dependency service or group could start. »

  Hi, I tried many things resolve. I update my Vista last Kit. I also sort things like using CCleaner RegClean Pro...

  I also tried sfc/scannow
  and here's SOME of my journal:
  http://pastebin.com/wKBJGDpV
  and you can download the entire .txt file here: http://www.box.net/shared/gco69vkso2kh2y7jaxas
  I also tried this:
  C:\Windows\System32 >netsh winsock reset

  Unable to load the programme of assistance following DLL: WSHELPER. DLL.

  Unable to load the programme of assistance following DLL: IFMON. DLL.

  The following command was not found: winsock reset.

  I also tried to run and do the MicrosoftFixit.WindowsFirewall.Run.exe nothing works.
  Please and thank you.

  Hi, Jahkr,

  Log shows that you had corrupted files and components.  System File Checker could not repair files try to repair the files first.

  See this document for corrupted files

  http://support.Microsoft.com/kb/929833

  To resolve this problem, make sure that all dependent services have been started. To do this, follow these steps:

  • Click Start, run and type Services.msc
  • Double-click the network connections entry
  • Set its Startup type to manual
  • Click Start to start the service
  • Double-click Windows Management Instrumentation
  • Set its startup type to Automatic
  • Click Start to start the service.

  After you start the services of two dependants, try to start the Windows Firewall service.

  http://www.Winhelponline.com/articles/145/1/error-1068-error-message-when-you-try-to-start-the-Windows-Firewall-service.html

• Printer Spooler error 1068: the dependency service or group could not start

  Original title: the printer spooler error

  With the help of Windows 8

  Cannot connect printer to computer.

  Looked at troubleshooting and tried to manually start the printer spooler. but does not work.
  
  Windows could not start the Service on the local computer printer spooler.
  Error 1068: The dependency service or group could not start
  
  Could someone please suggest ways to address them. Its a HP computer. Unable to connect a printer HP or Epson via USB or Wi - fi.

  Thank you

  With the help of Windows 8

  Cannot connect printer to computer.

  Looked at troubleshooting and tried to manually start the printer spooler. but does not work.
  
  Windows could not start the Service on the local computer printer spooler.
  Error 1068: The dependency service or group could not start

  Could someone please suggest ways to address them. Its a HP computer. Unable to connect a printer HP or Epson via USB or Wi - fi.

  Thank you

  need to update Printer Spooler service...

  Run the following as run as administrator...

  https://www.dropbox.com/s/uf1borer6hgce0z/printerspoolser.bat

  Reset...

• Windows could not start the background service Itelligent transfer service on local computer. 87 error: The parameter is incorrect

  I had a crash dump blue screen, tried solutiions to the problem and told me to go to windows update and download all windows updates. downlownloading all updates failed and I got the error.

  Code 80246008

  Click on get help with this error and was instructed to go to services and start the background intelligent service services, it gave me the error message;

  Windows could not start the background service Itelligent transfer service on local computer. 87 error: The parameter is incorrect

  Not very computer savvy! no idea what it all means or what I would do to this topic! Thanks a lot for any help

  Try this:

  To change or restart the Service (BITS) Background Intelligent Transfer

  1. Open administrative tools by clicking the start , clicking Control Panel, clicking system and Maintenance, and then clicking Administrative Tools.

  2. Double-click Services. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  3. Right click on the service of Intelligent Transfer (BITS) background and then click Properties.

  4. Under the tab general, next to startup type, make sure that automatic (delayed start) is selected.

  5. Next to Service status, check whether the service is started. If not, click Start.

• Print Spooler error 1068: the dependency service or group could start. __

  I tried - unsuccessfully - restart the print spooler on a box of XP with SP3.  I read the previous posts for this error and this box refuses to restart the service.

  Is there an easy way to fix this without reverting to a system reset?  Can I run a repair?  If so, it will fix the problem?  I tried to run a restore of the system to a previous date and who could not do anything for me either.

  When you attempt to start the Print Spooler Service, error 1068 means "the dependency service does not exist. the dependency service or group was able to start. »

  Depending on your environment and your type of printer installed, your Print Spooler Service will have other dependent services that must run before the Print Spooler Service starts.  If the dependent services do not work, you will see an error 1068 or a similar message on the dependent services when you try to start the Print Spooler Service.

  Some Lexmark printers add their own XP services and start the Print Spooler Service, lists them as dependencies and that is why these Lexmark Services must run before the print service spooler will begin.  It may be listed as the LexBce Server.

  You now or have you ever have all installed Lexmark printers?  If Yes, do you still use Lexmark printers?

  Depending on your printing environment, if you use another type of printer, you can have other Service listed tab in the Print Spooler Service dependencies.

  Use the Applet of Services XP to check the dependencies of print spooler and options.

  Click Start, run and enter in the box:

  services.msc

  Click OK to open the Services Applet.

  Locate the Print Spooler Service, right-click, choose Properties, and then look at the Dependencies tab.  Services listed there must run before the Print Spooler Service starts.  If they don't, you'll get an error 1068 or a similar message on the dependent services when you try to start the Print Spooler Service.

  You should always see the service remote procedure call (RPC) and maybe a few others depending on the type of printer that you have installed (Lexmark printers can add some dependency Services to your configuration of XP).  All dependent services must run before the Print Spooler Service starts.

  Dependent Services may vary according to the type of printer that you have installed.

  The RPC service is also required for many other things to work properly and is usually still running and the autostart value.

  If the RPC Service does not work and does not start automatically, you can have other problems, but start with the easy stuff first.

  Of the Services Applet, find the service remote procedure call (RPC) and if it does not, right-click and start it and set it to automatic.

  Then find and all the other print spooler dependency services listed in the Print Spooler Service Dependencies tab.  They will be lance automatically the next time you reboot your system (if that is your desire), set the startup type for these Services to automatic.

  When everything works as you want, restart and check your Services again to be sure that they start correctly and solve any addition
  questions.

  If the remote procedure call (RPC) service is not listed as a dependency for your Print Spooler Service, you must inform XP that the print spooler service depends on the RPC service.

  Click Start, run, and in the box type (including important space after the "equal" sign):

  dependent on the spooler of sc config = RPCSS

  Click OK to assign the RPC service for the print spooler service, and then make sure that the RPC Service is running and start your Print Spooler Service.

  If you still can not understand it, react with the items that you see the tab of the Print Spooler Service dependencies.

  Don't forget to restart and check that everything works correctly after each adjustment.

  Please note that using the above command will effectively remove all the current (and perhaps old) Print Spooler dependency assigned for the Print Spooler Service and assign it only dependent on the RPC Service.  It would be 'normal '.

  The dependence of CPP Service would be typical of most facilities, or after you have uninstalled all the time some printers (Lexmark), but your printer may have a few other dependencies.  If it still does not respond, we'll fix it!

  Do, or do not. There is no test.

  I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!

• has had to rebuild the system could not find the service pack 1A winows XP

  Operating system XP Pro computer Crash rebulit must obtain service packs updated.  I Armi 2 requires service pack 1 and service pack 3 requires service pack 1 or 1a.  The Microsoft site http:xpsp1.microsoft,com/isapi/pstream.dll/xp/sp1.usa.1106a does not.  Any help would be appreciated.

  I had a backup but when

  I do a restoration of that my mouse no longer works. and I get to a point where the only option of entry is to move the slider to accept (and then I'm incapable of).

  Windows XP Service Pack 2 - Download (for single PCs too)
  http://www.Microsoft.com/downloads/details.aspx?FamilyID=049c9dbe-3b8e-4F30-8245-9e368d3cdb5a&DisplayLang=en

  Operating systems supported: Tablet PC, Windows XP, Windows XP Home Edition, Windows XP Media Center Edition, Windows XP Professional Edition

  Windows XP Service Pack 3 for developers network installation Package and the professionals (unique facilities for the PC can use the same file)
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5B33B5A8-5E76-401F-BE08-1E1555D4F3D4&displaylang=en

  Operating systems supported: Windows XP Home Edition, Windows XP Professional edition, Windows XP Service Pack 1, Windows XP Service Pack 2

  How to obtain the latest Windows XP service pack
  http://support.Microsoft.com/kb/322389

  In order to successfully install the latest Service Pack for Windows XP, follow the steps to check the status of your PC.

  1. Windows XP Service Pack 3 (SP3) cannot apply only on the 32-bit version Windows operation sytem. To check if your system is 32-bit or 64-bit, click on
  2. Windows XP Service Pack 2 (SP2) or Windows XP Service Pack 1a (SP1a) must be preinstalled before you install Windows XP Service Pack 3 (SP3). To check which service pack is currently installed on your computer, click "to check which service pack is installed. To install Windows XP service previous packs, use one of the following options:
     • Click here to download Windows XP Service Pack 2 (SP2)
     • Click here to download Windows XP Service Pack 1a (SP1a)
  3. To install Windows XP Service Pack 3 (SP3)
     • Click here to see the steps to automatically fix
     • Click here to manually download the Service Pack 3.
     • Click here to order Windows XP Service Pack 3 on a CD

  Steps to take before you install Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950717

• Windows spooler printer 8 error 1068: the dependency service or group could start.

  Just upgraded to Win 8 ENT x 64 Win 7 ENT x 64.

  I thought, maybe I need to restart the service. Go in Services, look to the top of print spooler and select restart.
  But I get an error:

  "Windows failed to start the Service on local computer print spooler.
  Error 1068: The dependency service or group could start.

  "Okay, so I go into properties and see what are the dependencies.
  Attached image:
  

  RPC is running, however, no FAX.
  Go to Fax and just getting started. I get the error 1068
  Focus on dependencies here.
  Attached image:
  

  IM lost at the moment.
  Any help would be greatly appreciated.

  I ran sfc/scannow and found no problem.

  Please notify.

  I found this somewhere else and this fixed my problem

  I had the same problem and I have created a batch file that I have run as Administrator:

  CMD /K SC CONFIG SPOOLER DEPEND = RPCSS

• Cannot start (Service event log)

  While planning to try a task sheduler task, I have been informed a necessary service work not (event log). On trying to start the necessary service (event log), I received the following error message. {Cannot start service on Local, specific error 126 computer event log module cannot be found.} I was online looking for a solution without success, would appreciate any assistance to resolve this problem.

  It's me, George. I solved my problem with a little help from Microsoft.  The solution is simple for those of you with the same problem.  Rather than search the web and the Microsoft Web site, I simply clicked on my "Help and Support" icon on my desktop and entered in the same query.  This time, I got a response that actually question my problem even though she warned that she could apply to XP.  It was for Windows 2000, but I tried anyway and it worked.  The cause of the problem is a DLL missing from the Windows\system32 directory, a file named "eventlog.dll.  It is still on your computer in a different directory, so all you have to do is a search under the road you have installed Windows on this file and copy it to the Windows\system32 directory and everything should be fine.  It's as simple as that.

  I hope this helps all who can be soon _ trying to correct what I tried to correct for the past three days.  Good luck and may the force be with you.

• Unable to connect on the internet on another computer - "Windows could not find a certificate to connect to the network (named).

  When I try to connect to internet on my other computer I get a message saying "Windows could not find a certificate to connect to the network (name)". It's only since I've had a second computer as it does on my old computer which is

  a laptop HP Pressario with Windows XP Home Edition. Someone told me to go to authentication in wireless networks, but can highlight something here as everything is gray.

  Hello

  · What type of encryption do you use on the router?

  · You have the latest drivers for your wireless network card?

  Make sure the authentication IEEE 802. 1 x wireless card is disabled, and check if that helps.

  a. Click Start, then select run.

  b. term ncpa.cpl type dialog box and then click OK.

  c. right click on wireless network connection icon and select Properties.

  d. click the wireless network tab.

  e. click on the properties button next to remove it.

  f. click on the Authentication tab, and then clear the authentication 802. 1 x IEEE select this network check box.

  g. click OK to update the settings.

• listener_scan1 could not find the name of service

  Hi all

  I installed 11203 on 2 node RAC cluster. I created 1 listener to scan. When I give lsnrctl status LISTENER_SCAN1, I get the below error

  AMT-01101: could not find the name of service LISTENER_SCAN1

  Please, give your suggestions and help on this issue.

  Thank you

  NR

  Hello

  Try configuring the tnsnames.ora in this format and let me know

  If you use load balancing, try

  TBESTDB =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = TCP (PORT = 1531))(HOST = node1_vip))

  (ADDRESS = (PROTOCOL = TCP (PORT = 1531))(HOST = node2_vip))

  (LOAD_BALANCE = yes)

  (CONNECT_DATA =

  (SERVER = DEDICATED)

  (SERVICE_NAME = TBESTDB)

  )

  )

  And you can add below if you want to connect to a specific instance

  RAC1 =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = TCP) (HOST = rac1-vip)(PORT = 1521))

  (CONNECT_DATA =

  (SERVER = DEDICATED)

  (SERVICE_NAME = rac.oracle.com)

  (INSTANCE_NAME = rac1)

  )

  )

  RAC2 =

  (DESCRIPTION =

  (ADDRESS = (PROTOCOL = TCP) (HOST = rac2-vip)(PORT = 1521))

  (CONNECT_DATA =

  (SERVER = DEDICATED)

  (SERVICE_NAME = rac.oracle.com)

  (INSTANCE_NAME = rac2)

  )

  )

  Note: Replace the SID, Servicename, hostname, port etc depending on your environment and also ensure that the tnsnames.ora should be in an appropriate format (for example: the opening and closing should be in the right order.) If you add an extra space further it will throw error..)

  Kind regards

  Pradeep. V

• Get the error 'windows' failed to start the spooler service on local computer, error 1075 printing when you try to install a printer.

  Hi, printer "spooler".

  IM using widows vista, I had a problem installing my printer, can not install because that the problem with 'spooler service', followed the advice of microsoft and went to services, a window apears, "windows could not start the spooler service on local computer, error 1075 printing;"the dependency service does not exist or has been marked for deletion"can help you please?

  Hello pedro,

  We will remove and reinstall the printer:

  1. remove the printer from the PC.

  2 uninstall the printer from the PC driver.

  3 reinstall the printer driver.

  4 reinstall the printer.

  Also, here are some links about printing reference:

  Open the printer Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter

  Why can I not print?

  http://Windows.Microsoft.com/en-us/Windows7/why-cant-I-print

  Find and install printer drivers

  http://Windows.Microsoft.com/en-us/Windows7/find-and-install-printer-drivers