cannot start single beep heard

Similar Questions

• HP Pavilion DV4-1125nr cannot start after the update/update BIOS version F.12 to d.55

  System: HP Pavilion DV4-1125nr PC Notebook

  Product #: FR922UAR #AB

  The system board ID: 30F7

  Version of the BIOS (before the update): F.12

  OS: Windows 7
  

  I tried to update the BIOS to d.55 which was provided by HP. After the successful installation the closure of new windows BIOS correctly. I restart the PC, HP Logo appears and then nothing happens. The operating system do not load or start at all.

  I also tried to boot using the Windows 98 Second edition CD (to charge BACK), but it did not work.

  Please help me...

  Fortunately I found a Solution to this problem.

  Here are the summaries (and modified according to my needs) the steps that I've taken of the following thread:

  http://h30434.www3.HP.com/T5/notebook-hardware/dv4-1140GO-won-t-boot-after-flashing-latest-BIOS/m-p/19698#M2730

  1. go to the hp site and download the correct version of your BIOS. In my case it had to F.12. Why not the latest version? Because there is no guarantee that the last one will work for you, know after measures.

  2. go where you downloaded the file and using 7 - Zip (or tool of your choice of course) unzip the contents to a folder of your choice. We'll get to that later, so keep this file open.

  3. use 128 MB or no matter what key-USB USB key (the smallest, you might find, because they said the smaller the better ) and reformatted to FAT or FAT32 click with the right button on the drive by clicking on "format".

  4. now that my USB is ready, go back to the folder where you extracted the file to update the BIOS (always open to the right of the folder?)

  "5. If you have the graphics card Intel integrated like me, copy the ' 30F7F12U. FD"of the key USB and RENAME the file '30F7F12U. FD' at '30F7. BIN ". Remember that this name calling to order "DV4-1125nr. If you have a different motherboard, the system or the BIOS, the name must be determined according to the.

  The next steps are exact 0.0 as follows (the link of a full detailed discussion is provided below), I simply numbered:

  6 unplug the adapter from the laptop.

  7 remove the battery from the laptop.

  8 insert the USB key into one of the USB ports on the laptop.
  Does not seem to matter which.

  9. press the 'Windows' key and the 'B' key

  10. connected to the power adapter.

  11 press the 'Power' button on the laptop.

  12. when the LED is entered, letting go of the power button / stop and the two keys down earlier.

  13. After about 10 seconds the notebook started to read the USB key. While searching for the file, the laptop beeps every seconds.
  The number of beeps varied, depending on what size of the key USB has been and
  the number of files on the USB key, a single beep for many.
  If the file was not found, the laptop will restart and try again.

  14. If the file is found then it took about 12 seconds for the laptop to load. No beeps sound not heard during the loading time.

  15. when it is responsible for the laptop has started flashing, indicated by beeps every 2 seconds. It took about 32 seconds.

  16. about 5 seconds after the ringtone had stopped off the laptop computer.

  First I update my pc with the last BIOS (F.66), but did not work for me (operating system not loaded after HP Logo ). So I decided to go back to the old F.12 (the version that has been shipped when the laptop was purchased) according to the procedure described above. But the problem is where to find version F.12 as HP currently provides links only for the version of the BIOS F.66 to d.55 (in the drivers from the hp support site section)

  Fortunately, I found a direct link to this version F.12 in the next thread.

  http://Forum.NotebookReview.com/HP-Compaq/304332-C700-CQ40-CQ45-dv4-dv5-DV6-hdx18t-Insyde-BIOS-recovery-using-USB-thumbdrive-2.html

  F.12 version:

  FTP://ftp.HP.com/pub/SoftPaq/sp40501-41000/sp40749.exe

  This was F.12 and worked for me. Thank God Almighty I return my PC.

  Thanks to all who contributed in the discussions above.

  Kind regards

  -gmuhammad.

  If you think that this post has helped you, then please give KUDOS *.

  Close the thread (Accept as Solution), if your problem is solved *.

• Cannot start Windows on first boot (works after restart)

  I recently removed the dust in the housing using a bellows, at the end of which I had unplugged and removed by the drive hard and video card. After reinserting the components and start the computer, I heard a continuous beep sound while the screen remains dark. After the reopening of the case I noticed that I forgot to plug a wire into the video card (PCI I think) I plugged. After you start the computer again once it wasn't a beep more and I got the video. However, Windows does not load on first boot more. He will go as far that the loading screen of the bar after which I get a 'no signal' and the computer restarts. I will get a screen with the message that Windows cannot start, probably due to software or change of material and a number of options. When I choose to start windows normally it will mostly start normally (sometimes I need to repeat the process) and I can use the computer normally (I use it now). A reboot, the computer has been shutdown very slowly and later wouldn't pass the default splash screen, but it has not reoccured.
  Another small issue, I'll have is a regular of the screen flicker.

  I used the drive control to the start of several times. I tried to address this problem by starting the computer with the Vista installation disc and select Repair, but I was not allowed to fix the menu says there where no problem. I reinstalled Windows (and I can't be fully updated all the drivers again, hance perhaps the flicker of the screen?), but to no avail. The closest thing I've met on the internet who resembled my problem was this: http://answers.yahoo.com/question/index?qid=1006011905618 so, I replaced the BIOS battery, which once again changed nothing (BIOS holds settings BTW). In fact, once I'm on Windows I would seem to have a computer that works very well. The issue doesn't bother me so much if I wasn't worried, that it could get worse.

  I have Vista 32 bit, Intel E6750 CPU, card mother Gigabyte GA-P35-DS3, Geforce 8800 GTS 320 MB video card, 2 GB of RAM, Samsung 400 GB HD Vista has been entirely updated (including SP2).

  Hi CeCoRM,

  I suggest physically wipe you the hard drive again by blowing air earlier could have pushed the dust particles away on the inside.

  I would recommend also you post your question in the TechNet forums for assistance.

  Hope the helps of information.

• Firefox is exhausted before but cannot start more

  Firefox is exhausted before but cannot start more.
  I tried the solutions, but it does not work

  Large. Glad to know you have the root of the problem, and thanks for posting back.

  Usually, we suggest that when checking for malware several tools to serve because no single tool is looking for or find everything. The standard help article

  • Fix Firefox problems caused by malicious software

• Pavilion Desk Top will not boot.will single beep

  Good evening, I have a top of Office Pavilion with Windows 7 as operating system. After trying to Flash the BIOS, I got a BSOD and after trying to restart all I get is a beep. Then, I tried to replace the processer always the same thing. Then I tried the video card but still the same thing. I know that someone ther has the answer to my problem.  Thank you, Jerry

  I see this which and from which it came.  HP uses many variations of the motherboard on the name of M2N78 - LA and the BIOS are not interchangeable.  I'm not competent enough to say which ones is simply.  Maybe a guru HP will pop and troubleshoot.  I think that this motherboard can be roasted, however.  There are a few methods of recovery that may or may not work on this.  You can by looking at the motherboard chips what BIOS installed this card?  You may find value in this thread: http://h30434.www3.hp.com/t5/Desktop-Lockups-Freezes-Hangs/How-to-Flash-BIOS-if-you-cannot-start-Windows/td-p/436381

• Halo 2 for windows vista does not work on my windows 7. Saiys it cannot start the direct customer

  original title: Halo 2 for windows vista

  Halo 2 for windows vista does not work on my windows 7.  Saiys it cannot start the direct customer.  It will not work in single user either...

  Hello

  Plase make sure you have the latest version of the GFWL Client installed:

  http://www.Microsoft.com/games/en-us/live/pages/livemarketplace.aspx

• IDT high definition audio CODEC. Error: the device cannot start (code 10)

  Original title: IDT high definition audio CODEC

  My Dell Latitude D620 has no sound control or (other than the system beep) volume, the volume control buttons do not work. When I uninstall and reinstall the IDT, I get an error message - "device cannot start (code 10).» Help!

  Hello

  1. have you done any change in software on the computer lately?
  2. What is the brand and the model number of the sound card?

  Method 1.
  Follow the procedure step by step in the article below and check.
  No sound in Windows
  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

  Method 2.
  If the problem persists, follow the steps listed in the article below and check.
  How to troubleshoot sound problems in Windows XP
  http://support.Microsoft.com/kb/307918
  Note: You can visit the website of the manufacturer of the computer to get the latest drivers for Windows XP and install it.
  I hope this helps.

  See also: related errors Description 10 Code that generates the Device Manager in Windows on computers
  http://support.Microsoft.com/kb/943104

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Another type of "this device cannot start. (Code 10) "failure

  Environment:

  EM250 Netbook (basically an Acer)

  Windows 7 Starter

  Sansa Clip + 4 GB

  Version V01.02.15A

  Basically, is that the device will not work in MTP mode.  Works very well in MSC, but PSG is necessary because the unit was purchased specifically for use with audible.com audiobooks, and it does not have MSC mode.

  Got the "this device cannot start. (Code 10) "goodbye, looking for inproperties after the driver will not load.  Two "insertion events" beeps during the process

  Tried the "'Net local service localgroup administrators / add" to http://kb.sandisk.com/app/answers/detail/a_id/192 "

  The command was successful, but has not fixed the problem.

  Tried updating all the drivers I could find.  A ran the sansa updater to make sure everything was up to date.

  The device can't the same way on an Acer netbook and similarly on a Windows XP desktop.

  I look at the installation in the control panel Device Manager, you can see the low level driver loading and the portable device become active, but then the level user MTP driver fails.

  from the event viewer, I see the following events associated with inserting

  Event ID 24576 information: "Drivers have been correctly installed for device USB\VID_0781 & PID_74D0 & REV_: 8<>

  25089 Information event ID: 'it was not possible to access the device () after installing the drivers. Error code 0 x 80070651. »

  Event ID 10110 critical: "there was a problem with one or several drivers from user mode and the hosting process is finished.  This can temporarily interrupt your ability to access devices. »

  Event ID 10111 critical: "the device USB MTP Device (location Port_ #0003.Hub_ #0005) is offline due to a user-mode driver accident."  Windows will attempt to restart the Unit 5 times more.  Contact the device manufacturer for more information on this problem. »

  I suspect the key error is the "error code 0 x 80070651.", but I have not found a solution for her online that works

  I tried the technique of driver to uninstall without success.  After the step to "Discover new material" he would miss just the same way.

  I just found a way that worked well.  I have re-installed the firmware.  Not through the Sansa Updater.  This program would simply note that my Clip + release the latest version, then give up.

  Instead I manually re-installed the firmware using the process that the people of Mac and Linux have to use. detailed on the

  http://forums.SanDisk.com/T5/clip-Clip/Sansa-clip-firmware-update-01-02-15/TD-p/150227

  In short, it is to download the zip to show off to

  http://mp3support.SanDisk.com/firmware/ClipPlus/clipplus01.02.15.zip

  Unizip it, then move the two files to the root of the Clip + while it is mounted in MSC mode.

  When he unplugged the updates the firmware.

  I don't know if it was a step necessary or not, but I also reformatted the Clip + menu.  In any case, it now amounts to PSG. mode.

• Why won't my CD/DVD Slymtype player work, error: this device cannot start. (Code 10).

  Original title: why not my job as a player of DVD/CD of Slymtype at all?
  Here's what I have:

  SlimType DVD C DS24CZP ATA Device

  Windows Vista Home Basic

  Acer aspire 3680 series
  ------------------------------------------
  So here's my problem:

  Recently, I put a DVD disc into the drive. Then, once I closed it, it started to turn, then what sounds like a sound signal, spining, beeps several times, and this will be repeated for a few minutes. Once it stopped, it does nothing. You can not even here it spining. No AutoPlay starts, none Open box, nothing at ALL. The computer doesn't even recognize that there is a DVD in there.

  So, I advanced and found in the Device Manager. The picture showed it was a disc with a CD on top (representing is a DVD/CD player) and in front of it, there was a «!» So I opened the information for it. Here's what he said:

  "This device cannot start. (Code 10) »

  When I try to make windows to search for a solution, it came not with something. I tried to update the driver; no effect. Tried neutralizing him and he the reactivation. No effect. Tried unistalling and restart my computer. When he tries to install it, it fails.

  So now, I did everything I know. Does anyone know how to fix this without having to replace the drive itself? Or should I replace it?

  Thanks in advance!

  Hello

  Did you do changes on the computer before the show?

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
  http://support.Microsoft.com/kb/943104/

  Method 1:
  You can perform the steps in knowledge base article and check:
  http://support.Microsoft.com/kb/982116

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following windows Help article.

  Method 2:
  You can also visit the links:
  Your CD or DVD drive cannot read or write media
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  Hardware devices not detected or does not
  http://support.Microsoft.com/GP/hardware_device_problems

• USB Mass Storage Device gives me the Code 10 error. This device cannot start

  I have an external hard drive, Iomega Prestige 1 TB and one of the people at the school he fell from the top of the computer tower that resembled a fall of 30 cm, after it still worked, but then a few minutes later there not later he was still able to connect but it kept asking me to format it , so I wanted to try and find a way to get my data without formatting it. A day later I plugged the external hard drive, it started to beep for 5 min then it connected to the computer but unfortunately didn't show up in my computer, but he did it in the printer and peripheral. I checked my device manager and it showed a yellow explanation mark with the USB mass storage device. I went to properties and it says: "this device cannot start. (Code 10) "How can I solve this problem?

  Hi AntonioDavism,

  You can check if the following is useful.

  Method 1: Run the hardware and devices Troubleshooter and check if that helps.

  Method 2: Follow the steps in the below article mentioned and look for the question.

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers

• Cannot start HP Support Assistant,

  Cannot start HP Support Assistant - always get the message "HPSF.exe has stopped working" and need to close.  I have a HP TouchSmart 610 running under Windows 7 64-bit.  TouchSmart works not properly, but used to work.  Cannot start webcam either.  I totally lost to the search on the HP website for a solution.

  The version that is in your Web page - and that I gave you to date is an update only.

  Rats.

  Search your Recovery Manager for the original software:

  • Start > search / type "Recovery Manager" > click here to open the program
  • You want "Immediate aid" and search for "reinstall drivers and Applications.
  • Wait for the list to build...
  • Search for HP Support Assistant - version, of what I can extrapolate from what I see now, should be a version 5.x - perhaps 5.1.x or 5.2.x
  • When you find HPSA, reinstall it.
  • Reboot the system after installation.

  Assuming that installs it the software (from the Recovery Manager), you can then use

  sp54931 V6.1.12.1 HPSA Rev A

  update the software and take advantage of the fixes contained in this package.

  ==================================================================================

  I can't find the original HPSA to your exact system type.  I hope you find your software in your Recovery Manager.

  I find the reference to the last update - 7.0.39.15 revision A

  I heard that, in some systems, version 7.x has exposed problems (constant reboot requests).  This will be fixed by HP and it won't be long until the issue is resolved.  Your system may not even be affected - you can always try it later if the current problems are resolved.

  If the original HPSA software is not in the Recovery Manager, it can be elsewhere in your system...

  Let me know.

  If all else fails, we could try HPSA for a similar system of TouchSmart - the worst it will do is not installed.

• NIC cannot start guest operating system!

  Hello world

  I installed vmserver 2 on vista (host OS). I created a virtual machine (win Server 2003) with a NIC birdge. but when this machine starts there is no network adapter in "network connection." In device manager there is an exclamation point on the PCI network card. When you open the properties of the nic in the concole, his writing "nic cannot start. (error code 10) »

  I want just a virtual machine (win Server 2003) with a single network adapter.

  Anybodey can help me?

  Thank you.

  Have you installed the VMware Tools?

  You tryied to do a 'update driver' on the NETWORK map?

  André

• Cannot start the physical machine converted to a virtual machine under ESXi 4.0

  Hi all

  I have 2 has with the material below

  Dell optiplex 755 2.4 Qcore 4 GB of RAM and 160 GB of HARD drive

  A performer with ESXi 4.0 other runs with Windows 2003.

  I tried to convert physical machine with "Vmware Vcenter converter Stand alone" 4.0.1 build 161434

  I used the tool on the source machine and by another machine on the network.

  The two process converts the physical machine to a virtual machine successfully without any errors.

  After conversion, the virtual machine cannot start, and shows only a small slider that is not flashing too.

  

  The physical machine have a single partition of 160 GB

  The space currently used on the physical machine is 26 GB.

  I reduced the size of the HARD drive to virtual computer with fix / light available in 40 GB.

  point to make here is that the ESX have only 160 GB HDD, so he will not be able to copy all 160 GB because of which I am reducing the 40 GB HARD drive

  I converted a few other physical machines with 40 GB HARD drive and they work well after the conversion.

  Any sugessions would be greatly appreciated.

  Thanks in advance

  Hi Sunil,

  Let me know the drive selected in the custom option controller.

  Thank you

  Krishna

• Cannot start the database the R12 DR Oracle EBS of RAC 10 g R2 using SRVCTL

  Hello
  
  I've implemented Oracle 10g R2 RAC data DR Guard for main server Oracle 10 g R2 RAC for EBS R12 (12.0.4).
  I followed Note + ' Business Continuity for Oracle Applications Release 12 on Release 10 gr 2 - Single Instance Database and RAC [452056.1 ID]. +.
  After you configure DR DG, I added DR Database to the Configuration of the Cluster. But I'm not able to start the DR Database via SRVCTL. But able to start the DR Database through Sql * more. I have already mentioned Note: + troubleshooting when srvctl cannot start the RAC instance, but sqlplus can start [ID 844272.1] + and tried to solve the problem but without success.
  
  , I opened SR but still, the problem is not resolved. Are there steps I need to do that is not mentioned in Note 452056.1.
  
  Rgds,
  Thiru

  Have you reviewed these docs?

  CRS - 215 srvctl cannot start ASM, listener, %ORACLE_HOME%/bin/ resources RDBMS with error [740319.1 ID]
  Could not start the Instance with Srvctl, no Info in the newspapers of Imon [ID 741212.1]

  Thank you
  Hussein

• Mac cannot start after el captain

  Cannot start after updating mac

  Safe Mode boot removes the system caches that can help after an OS X day or level.

  Follow these steps to start in safe mode.

  1. Start or restart your Mac.
  2. As soon as you hear the startup tone, hold down the SHIFT key.
  3. Release the SHIFT key when you see the logo Apple appears on the screen.

  After the Apple logo appears, this may take longer than usual to reach the login screen or your office. This is because your Mac performs a check of directory of your drive to boot in safe mode.

  To leave safe mode, restart your computer without pressing any keys during startup.

  Try safe mode if your Mac does not end commissioning