Cannot start the ripple of Services using the Chrome extension

Dear users,

I went through the audit process on the tools of development http://developer.blackberry.com/html5/documentation/v1_0/getting_started_with_ripple_1866966_11.html...

I was not able to start the Services of ripple. My ripple menu differs from others on the internet, for example http://escay.nl/stackoverflow/RippleServices.png I can't understand, why this is so.

What I see (lack of button start Services)

Can someone point me to the right direction to fix this problem, please?

I can activate the ripple of a webpage (for example the KitchenSink) and I see a Z10 in Chrome browser, but I'm not able to detect my own HelloWorld Web page on the local port 9910.

Chrome version 35.0.1916.114 m

Ripple emulator (Beta) 0.9.15

OS: Windows 7

The same point of view menu Opera 22.0.1471.50
with ripple emulator (Beta) Version 0.9.19
System: Windows 7 64-bit (WoW64)

Edit: It is the EULA appears and it is possible to accept it under Opera!  I followed the manual to "Allow the trip" emulator to https://developer.blackberry.com/html5/documentation/v1_0/getting_started_with_ripple_1866966_11.htm...

Tags: BlackBerry Developers

Similar Questions

  • Error: "Windows cannot start the windows firewall/internet connection sharing (ICS) service.

    On my Eee PC under XP Home edition tablet, I get the error "Windows cannot start the windows firewall/internet connection sharing (ICS) service" when I try to access my firewall. I also can't connect to my router Wireless Lan to go on the internet. This may be due to some viruses that have been deleted using Microsoft Security Essentials.But the problem persists. Could recharge SP2 solve this problem or am I condemned to reload the operating system?

    Hi jdmanel,

    NOTE: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following link. http://support.Microsoft.com/kb/322756

    Follow the steps in the article.

    You cannot start the Windows Firewall service in Windows XP SP2

    Troubleshooting settings of Windows Firewall in Windows XP Service Pack 2 for advanced users

    For reference:

    How to manually open ports in Internet Connection Firewall in Windows XP

  • My windows firewall does not illuminate. Windows cannot start the Windows firewall Service ICS.

    How can I solve unless I need to have this problem to download protection software.

    Hi Octavia10,
     
    -What version of service pack of Windows XP you are using?
     
    Try the methods listed in the given article to resolve this problem:
     
    Note: The steps are applicable to the other version of Windows XP as well.
  • The Windows Audio service is stopped when I try to run it it displays the following error message "windows cannot start the Windows Audio service on the computer local error 0x800700C1: 0x800700C1.

    original title: The Audio service is not running windows vista

    Hello

    I tried windows repair common audio problems it did not fix the issue. It seems that the Windows Audio service is stopped when I try to run it it displays the following error message "windows cannot start the Windows Audio service on the computer local error 0x800700C1: 0x800700C1.

    I saw it in Event Viewer

    The file system on the disk structure is corrupted and unusable. Please run chkdsk on the volume SQ004725V01 utility.

    Thank you

    -Majid

    original title: The Audio service is not running windows vista

    Hello

    I tried windows repair common audio problems it did not fix the issue. It seems that the Windows Audio service is stopped when I try to run it it displays the following error message "windows cannot start the Windows Audio service on the computer local error 0x800700C1: 0x800700C1.

    I saw it in Event Viewer

    The file system on the disk structure is corrupted and unusable. Please run chkdsk on the volume SQ004725V01 utility.

    Thank you

    -Majid

    These error messages are a pain in the neck to extract useful information.

    I suggest that you do a search online 'pilot audio free downloads' and find another audio program for your PC.

    If you find something that works for your satisfaction - remove your original pain in neck audio software and make sure you make your audio program newly found the 'default' device.

    Realtek and NVIDIA, for example get stuff good free audio driver.

    If the new program does not work - it would be a good indication that you have hardware on your PC, drive problems and no amount of play more with to try to correct the audio software will help. Period

  • Windows cannot start the firewall service.

    Original title: my firewall stopped working and it won't let me turn it back on.

    My computer has alerted my that my firewall was off this morning. The alert came with the possibility to reactivate after having used the option of tis, another box emerged stating that it cannot be turned on again and try to activate it manually. I tried to turn it on manually and it still doesn't work. He is said to be the first "Windows Firewall settings cannot be displayed because the associated service is not running. You want to start the Windows Firewall Service? "after you press 'Yes', it says"Windows cannot start the firewall service. No error message is given. Any ideas?

    Hey, bed,.

    File system (CFS) auditor scan and see if it finds a breach of integrity. If so, System File Checker will try to replace missing or damaged files.

    Information available at:

     

    How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

    http://support.Microsoft.com/kb/929833

    Kind regards

    Shinmila H - Microsoft Support

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Sims3-message-cannot start the game 0x039e8474 service initialization error

    someone recently put the sims 3 on my computer it's a game hacked, it worked fine on his computer, but it is not functional on mine me repeat it, cannot start the game 0x039e8474 service initialization error

    [Original title: program compatibility Application Applications App Apps game games Legacy Crash crashes Hang hangs]

    Hello

    Probably that's due to the custom being contained in the game which is not compatible with your current version. It can also occur when your cache has not been cleared of a previous installation or game save and damaged.

    I suggest you follow the steps mentioned in this article about this.

    http://Forum.thesims3.com/JForum/posts/list/561267.page

    Note: This response contains a reference to third party World Wide Web site. Microsoft provides this information as a convenience to you. Microsoft does not control these sites and no has not tested any software or information found on these sites; Therefore, Microsoft cannot make any approach to quality, security or the ability of a software or information that are there. There are the dangers inherent in the use of any software found on the Internet, and Microsoft cautions you to make sure that you completely understand the risk before retrieving any software from the Internet.

    If the problem persists, you can post the question in the Sims3 community forums.

     
     
    Hope this information helps. Response with status so that we can help you.
  • Cannot start the unit because the authorization service is not running - cannot start service

    I'm weirded out. When I try to start the unit on my VM, I get the following message:

    The Virtual Machine cannot be set to Unity mode because:
    -The VMWare authorization Service is not running.

    So, after a little checking, I realize that indeed, the authorization Service is not running on my host. I am trying to launch and get the following message (translated from the french, sorry):

    Windows cannot start the VMWare authorization on your local server. For more information, see Event Viewer. If this isn't a Microsoft service, contact your service provider indicating the service specific error code: 6000002.

    Event Viewer is a little more detailed... But not really useful:

    Unable to retrieve the token for the user to VMware: unknown error 1385 (0 x 569) (1385)

    NONE of these error messages to display more than a few visits on Google, especially not in exact search (with quotes around the exact phrase) mode. I'm at a loss as to what I can operate the unit.

    Technical details:

    Host: Windows XP SP3 (French)

    Dell Optiplex 760, Intel Core 2 Duo E8600 @ 3.33 GHz. 3 GB of Ram.

    VMWare: 7.0.0 build-203739

    Client: Windows XP SP3 (English)

    I have attached my log of vmware just in case. Will be extremely grateful for any help!

    Thank you!

    The only other thing I can think is a reinstallation of the vmx86 service. Rerun the batch previously posted like this, with the extreme detail;

    Tracking Add "HKLM\SOFTWARE\VMware, Inc." /v loglevel /f /t REG_DWORD /d 0 x 36

    "%programfiles%\vmware\vmware workstation\vnetlib.exe" - stop vmx86

    "%programfiles%\vmware\vmware workstation\vnetlib.exe" - uninstall vmx86

    "%programfiles%\vmware\vmware workstation\vnetlib.exe" - install vmx86

    "%programfiles%\vmware\vmware workstation\vnetlib.exe" - beginning vmx86

    Tracking Add "HKLM\SOFTWARE\VMware, Inc." /v loglevel /f /t REG_DWORD /d 0 x 3

    and repeat once more for authd thereafter;

    Tracking Add "HKLM\SOFTWARE\VMware, Inc." /v loglevel /f /t REG_DWORD /d 0 x 36

    "%programfiles%\vmware\vmware workstation\vnetlib.exe" - stop authd

    "%programfiles%\vmware\vmware workstation\vnetlib.exe" - uninstall authd

    "%programfiles%\vmware\vmware workstation\vnetlib.exe" - install authd

    "%programfiles%\vmware\vmware workstation\vnetlib.exe" - beginning authd

    Tracking Add "HKLM\SOFTWARE\VMware, Inc." /v loglevel /f /t REG_DWORD /d 0 x 3

    If this does not help I suggest you reinstall workstation completely from your own account. Don't forget to note your serial number if your IT Department has already given it you.

    Joakim

    BTW, it might be that your group policy to prevent something. Check with your IT, if others have the same problem.

  • Error 1079: Windows cannot start the Diagnostic Policy on Local Computer Service

    Windows cannot start the Diagnostic Policy on Local Computer Service?

    Original title: error 1079

    Hi Craig,.

    Thanks for posting your question in the Microsoft Community.

    From your post, it seems you are getting and error 1079.

    The problem may occur if the service is started by the Local System account instead of the Local Service account (NT AUTHORITY\LocalService). The Local System account may have sufficient permissions to start the service.

    What service are you trying to start?

    We will follow the steps in this link and check if this solves the problem.

    Services do not start, and you receive an error 1079 on a computer that is running Windows Server 2008, Windows Vista, Windows 2008 R2 or Windows 7

    Thanks for posting the result and let us know if you need help on Windows.

  • Gettitng error message "service error: Windows cannot start the BITS service on Local computer" when you start BITS service

    When I try to start the Windows Services BITS service, I get the popup error message "service error: Windows cannot start the BITS service on Local computer.»  Error 2 ther system cannot find the file specified. »

    Where can I find the required file?  It is available from Microsoft to download?

    Thank you

    It could be a missing/incorrect servicesdll value. See if a request would help the BFE (#11) service registry fix in this page:

    Register various fixes for Windows 7/XP/Vista:
    http://www.Winhelponline.com/blog/Misc-registry-fixes-for-Windows-7-XP-Vista/

  • Cannot start the vCenter Server Service

    Cannot start the vCenter Server Service. To get this message to control the attached screenshot

    2013-09 - 03T 21: 34:18.800 + 05:30 [info 03612 'utilvpxdVdb'] [VpxdVdb::SetDBType] connect to DSN: VMware vCenter with username

    2013-09 - 03T 21: 34:18.800 + 05:30 [03612 error 'utilvpxdVdb'] [VpxdVdb::SetDBType]: database error: ODBC error: (IM002) - data [Microsoft] [ODBC Driver Manager] source name not found and no default driver specified

    2013-09 - 03T 21: 34:18.800 + 05:30 [03612 "Default" error] error obtaining configuration information from the database

    This looks like a problem in the registry for the part of the database or a correctly configured system DSN.

  • Cannot start the database the R12 DR Oracle EBS of RAC 10 g R2 using SRVCTL

    Hello

    I've implemented Oracle 10g R2 RAC data DR Guard for main server Oracle 10 g R2 RAC for EBS R12 (12.0.4).
    I followed Note + ' Business Continuity for Oracle Applications Release 12 on Release 10 gr 2 - Single Instance Database and RAC [452056.1 ID]. +.
    After you configure DR DG, I added DR Database to the Configuration of the Cluster. But I'm not able to start the DR Database via SRVCTL. But able to start the DR Database through Sql * more. I have already mentioned Note: + troubleshooting when srvctl cannot start the RAC instance, but sqlplus can start [ID 844272.1] + and tried to solve the problem but without success.

    , I opened SR but still, the problem is not resolved. Are there steps I need to do that is not mentioned in Note 452056.1.

    Rgds,
    Thiru

    Have you reviewed these docs?

    CRS - 215 srvctl cannot start ASM, listener, %ORACLE_HOME%/bin/ resources RDBMS with error [740319.1 ID]
    Could not start the Instance with Srvctl, no Info in the newspapers of Imon [ID 741212.1]

    Thank you
    Hussein

  • Cannot start the DSC Shared Memory

    I'm under LabView 7.0 (I know its an older configuration), with DSC and Lookout CPB to make periodic communications to an Omron plc. I needed to update the nor-DAQ because the PCI-6220 card needs the driver. I upgraded to NOR-DAQ 7.5 and now a get the cannot start the Service Manager memory shared DSC. I uninstalled the DSC and reinstalled without change. I found in discussion forums that I need nidscsm.exe in the windows\system32 folder, but is not there. I am running Windows XP.

    I have 2 configurations like that. 1 PC always connects to the controller even if the error appears, another PC connects any, lights flash but error timeout then comms.

    Thank you!

    Sorry, maybe I had my names wrong. He was DAQ - Mx that I've upgraded to v.8.1 and that's where it messes up the communications of the OPC. I knew that if I install the DAQ - Mx without option checked OPC she always clears the NIDSCSM.COM as a service, but I can still use serial OPC communication. Strange...

  • Cannot start the peer name resolution protocol Protocol

    No p2p service means no homegroup, which means no access to other computers or to the wireless printer... He worked a few months ago, and now, the protocol name resolution by peers, well defined to automatic, does not start, even if I click on properties, etc. and ask him to startr. I have ' windows cannot start the Protocol PNRP, error 0 x 80630203.»

    I still have unresolved problems with backups, so I don't want a new installation of windows.
    I'm getting so fed up with all the unsolved problems of windows! is windows 8 is going to be better?
    Thanks for your help.

    Hello

    Please keep us updated.

    You can read the articles below and see if it helps:

     

    Add a device or computer to a network

    http://Windows.Microsoft.com/en-us/Windows7/add-a-device-or-computer-to-a-network

     

    Share files via public folders

    http://Windows.Microsoft.com/en-us/Windows7/share-files-using-the-public-folders

    If you need further assistance, please answer and we will be happy to help you.

  • Cannot start the network connection: invalid access to memory location

    Hi team,

    Windows 2003 SP2 cannot start the network connection. Error connections network service terminated with the following error: invalid access to memory location.  Can you help me on this issue?

    Thank you

    Sangaré

    Hello

    Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the Windows Server 2003 Forum. You can follow the link to your question:

    http://social.technet.Microsoft.com/forums/en-us/winserverPN/threads

  • I cannot start the Windows Firewall, I get an error 0x6D9 code

    Original title: error 0x6D9 Code

    I cannot start the Windows Firewall, I get an error 0x6D9 code and I can't find less services. I am running Windows Vista, any help would be appreciated.

    Thank you.

    Original title: error 0x6D9 Code

    I cannot start the Windows Firewall, I get an error 0x6D9 code and I can't find less services. I am running Windows Vista, any help would be appreciated.

    Thank you.

    1 know if your AV (anti-virus) program is supposed to disable your Windows Firewall. Some do it.

    2. you do not do so in respect of the services? You do it in this way? ...............

    Start > Search box, type ser > press the Enter key > scroll down to Windows Firewall...

    under status, it lies and must say... Has begun

    under Type of status, it must be said... Automatic

    If it does not say that, right click on Windows Firewall > properties...

    in Startup Type, click on the pointer, and then select Auto

    to the service status, click Start

    Click OK when finished.

  • Cannot start the application... Error code 13

    I installed my real application in device playbook by using the debugging token. Request worked fine.but nw am not able to open the application. "Cannot start the application...". Error code 13 shows this error message while trying to open the application... .i don't know what to do...! Help, please...!

    Thank you

    I had solved it. It was the problem of token bug. It was expired while I have created a new and run the application .nw, it works very well.

Maybe you are looking for