Cannot start the Satellite Pro A120SE-180

Similar Questions

• Cannot start the satellite M35X

  Hi all.

  Cannot start my Satellite.
  When I push the power button, it turns on, the blue led is ok but the HDD led blinks 1 or 2 times or it happened when it is not clear at all and put the laptop off, but the power button remains lit.

  However, from time to time, it starts up, shuts down load the XP but after 1 minute.

  I have reinstaled recently the WinXP, and I did a bios update. Before that, the laptop didn't have this behavior, however, the XP raported me that the hard drive is faulty.
  I figured it is something related to the HARD drive.
  What should I do?

  How can I be sure that the HARD disk is wrong?

  Hi mate,

  If your HARD drive has bad sectors, you must exchange it ;)

  For example before doing this, you can check for bad sectors using specific diagnostic tools HDD as Drive Fitness Test:
  http://www.HitachiGST.com/HDD/support/download.htm#DFT
  Here, you can download an image file to create a boot disk. Then boot from it and to start the test, it is quite easy! ;)

  If your HARD drive is faulty, this tool should recognize this.

• Cannot start my Satellite Pro C70-A-159

  Hello

  My laptop Satellite Pro is only a few months, all of a sudden it stopped. And it does not turn.
  No display after you press the power button. Machine is fully charged. Charger is fine. Machine fell still warm after passing on. Is - this problem of fan?

  I bought from the United Kingdom. But currently now out of the country. May claim the guarantee. Is it possible to get the international warranty?
  Thank you

  Unplug the power plug, remove the battery and press the power button for 20 seconds. After having done that connect the power supply only and try to restart your laptop.

  What happens when you do this?
  Is there a reaction?

• Cannot start the Satellite P300-1FN - nothing happens

  Hi all

  I have recently reinstalled windows 7 on my Satellite P300-1FN and after a few minor problems, it was working fine.
  I blocked some drivers and updates, then it prompted me to restart.

  I turned it off and left while I had lunch, then tried to start and nothing happened.
  I mean nothing, not even the power led comes on. I put the battery in which I know has at least half a load and nothing.

  The fuse, still nothing changed. What is everything?
  It is quite dead.

  Any help appreciated.

  G

  > I mean nothing, not even the power led lights up.
  Sounds not good man

  Sounds like the motherboard or CPU problem because no s lights are on.

  But try this;
  Unplug the power adapter, remove the battery, wait some time (2-4 hours) and reconnect the two parts.
  Check if you could power the unit in place.

  If this is not possible then I would recommend contacting a professional technician to ASP.

  Sorry, but that's all I can suggest

• Cannot start the satellite a60 atheros ar5004g wireless code 10 adapter

  I have a satellite s-156 a60 with an atheros ar5004g wireless network adapter... When I updated the driver code 10 appearaed in Device Manager, I drove back to the old driver, with the same results.

  I then performed a new installation with the recovery dvd, with the same disappointing results.

  When I bought the laptop the only software I received was the dvd restoration.

  I downloaded other pilots, with the same results.

  suggestions, passing the wifi turn on light is orange... Thank you

  Hello stevek

  I'm not 100% sure but I think that your device is not ready WiFi and you can not use wireless Mini PCI cards. Is wireless antenna available?

• Cannot start the Satellite L730

  Hello

  I just bought a new laptop (satellite L730) and according to the instructions, I tried to follow the 6 steps of quick installation included in the instructions.

  After having turned it on, was asked to choose a 32 bit or 64 bit OS (I chose 64-bit as advised), I then followed the guests and answered all the instructions on the screen.
  a message _ + _ + "the computer has encountered an unexpected error... to install windows click ok to restart the computer, and then run the Setup again.

  I've been by clicking on 'OK' for the last 3 hours... and nothing has changed, I have not yet reached the stage to choose the location or the language of the keyboard etc...
  Help! :)

  Hello

  You should stop the laptop and try to reinstall the OS once more.
  Press the power button / stop, then press F8 which will allow the advanced boot menu.
  Here you must choose to fix my computer.
  Then choose HARD drive recovery and follow the instructions on the screen.

  Good luck

• Cannot connect the Satellite Pro L series to TV

  Hello

  I have trouble displaying to an external source (LCD TV). There is no display when I connect to the TV. When I press Fn + F5 the only option available is the LCD cell phone IE. I checked on the driver settings and there is no option to select the parameters for a secondary/external monitor.

  Does anyone know what I need to do so that I can display to an external source?

  I use the connection of 15 pins with an adapter to convert video connection - is it ok or should I use the S-video connection on the back of my laptop?

  Any help would be appreciated

  Hello

  This TV option does not appear because you have connected the TV to the wrong place.
  The TV device must be connected to the laptop s-video port via compatible and s-video cable supported!

  Then, you can use FN + F5 to switch the display to the TV set.
  Please note: sometimes the s-video channel must be enabled on the TV!

• Satellite Pro A300-1E7 - cannot start the cam software

  I bought the Satellite Pro A300-1E7.
  Webcam does not work in MSN messenger video call.
  Will have problems similar to the previous posting, except that I use Zonealarm.

  I think that Zonealarm has disputed cec_main.exe in a similar way.
  I tried to follow the instructions here, but without much success.
  I removed the Camera Assistant SOftware and re-installed the driver but does not seem to have improved things.
  Now c:\program files\ software of camera for Toshiba assistant has completely disappeared and the Panel camera assistant no longer appears on the side of the desktop.

  Any ideas please?

  Hello

  I used the Zonealarm happened and I was not really satisfied, because this software locked everything and most of the applications didn't work properly even after the new configuration! Finally, I removed this software and I noticed more advantage. my laptop starts much faster!
  I think this software would lock the cam software too.

  > Now c:\program files\ software of camera for Toshiba assistant has completely disappeared and the Panel camera assistant no longer appears on the side of the desktop.
  This means that the software has been removed and is not installed correctly.
  But to be sure, check in Control Panel-> Software (Add & Remove Programs) if the webcam is installed.

  I have the internal cam of Chicony too and it s works well as part of the software Skype. I didn't test t MSN but I don t see serious reasons why it shouldn't t work.

  In my view, you must first remove the zonealarm. Then clean the OS using CCleaner. Finally, redownload the webcam software and reinstall it!

  The toolbar of the webcam is not always visible on the desktop.
  It seems that if you move it the mouse cursor to the place where the webcam tool bar was hidden.

• Cannot start acrobat 9 pro (9.5). Says I have to uninstall and reinstall or call adobe customer service. Customer service, said at the forum.

  Cannot start acrobat 9 pro (9.5). Says I have to uninstall and reinstall or call adobe customer service. Customer service, said at the forum.

  No I only did a repair and it did not work. I have does not do a complete uninstall and reinstall. I just did a complete uninstall and reinstall and it works now. Thank you very much for your help!

• Cannot get the printer driver to install the Satellite Pro C660

  tried to install epson rx560 driver printer (windows 7 64-bit) the satellite pro c660 but it fails epson told me to consult a technician because the printer driver is very good

  Any help would be welcome

  I don t think that it is a mobile phone number.
  In my opinion, you should visit and check the Epson support page:
  http://www.Epson.co.UK/printers-and-all-in-ones/inkjet/Epson-Stylus-Photo-RX560/drivers-support

• Cannot disable my Satellite Pro L300 PSLB9U

  Hello!
  I don't know what happened, maybe it's when I used a type of program registry cleaner: advanced system optimizer, or a virus my pc infected too: Worm/Autoit.AGW or AGX... but now when I want to stop the laptop, nothing happens.
  I made a backup of this registry cleaning and when I restored it, the first time I could shut down windows, but now it no longer works...

  I tried to boot from a dvd with xp sp3 and it reports a problem, maybe a virus or a bad hard drive.

  What can I do?
  and if I have to install xp all still once, where I find drivers Toshiba, utility etc that I need? the laptop is supposed to be new, but it's not come up with any dvd... it's a small store in Mexico City, almost a laptop second hand I think...

  Thanks for your help!

  (came a problem of energy saver utility from toshiba at the same time... now, it seems to be fixed...)

  Satellite Pro L300-PSLB9U-02PRL3
  Microsoft Windows XP Professional 5.1.2600 Service Pack 3

  > I tried to boot from a dvd with xp sp3, and report a problem, maybe a virus or a bad hard drive
  This may be a virus, because the new installation of the OS would erase the entire HARD disk and you'd get a clean OS.
  Maybe it's a hardware problem if it would be a HDD issue then you cannot start the operating system of the s. You would only see an error message that OS has not been found.

  You can check in the BIOS if the HARD drive is recognized, otherwise will need you a new HARD drive.

  > and if I have to install xp all still once, where I find drivers Toshiba, utility etc that I need? the laptop is supposed to be new, but it's not come up with any dvd... it's a small store in Mexico City, almost a laptop second hand I think...
  The new laptops Toshiba are not equipped with recovery DVDs!
  There's a reminder installed on the laptop and it says that you must create a disk recovery first!
  Looks like you've ignored it or didn't check this and now you have any disk :(

  In any case, Toshiba drivers are on the Toshiba page we because I think that it is a Toshiba model we
  http://www.CSD.Toshiba.com/cgi-bin/TAIS/support/JSP/home.jsp?NAV=download

• Are the keyboards of the Satellite Pro A300 and A300 Satellite the same?

  Hello

  For the moment, I am here in France, and I plan to buy a Satellite Pro A300 with a QWERTY keyboard (which is not exactly a problem for me at the moment). The problem starts when I return to my country where the layout of the keyboard is QWERTY. I intend to sell the laptop when I return (I love not hooked to a laptop computer for a very long time). The thing is that the Satellite A300 is officially sold in my country, but not the Satellite Pro A300. I wonder now if the keyboard for the A300 is compatible with the Pro A300 (looking at the discussions of the forum for older models suggest they are compatible, but I'm not completely sure).

  Can someone provide a definitive answer to this question of compatibility?

  Thank you!

  The button of keyboard layout doesn't depends on Satellite Pro or series of satellites, but of the country where the phone was purchased.

  Different countries need different keyboards button and that's why the buttons are assigned to different positions on the keyboard.

  But the keyboard itself could be used in Sat Pro or Satellite phone too.

• 8 issues of the new owner of the Satellite Pro L300

  Hello to all forum users!

  I bought a new Toshiba, the Satellite Pro L300 laptop and have until January 14 to test - if it looks like it is not working properly I will return it to the store where I bought it.

  Here is a list of questions I have:

  1. whenever I turn on the laptop or it is suspension or hibernation mode, and when I disable it, the cd/dvd drive makes a clumsy mechanical noise.

  It seems to me like the cart that transports the laser and optics is running in a mechanical stop.

  Is this normal?

  2. There is a hot sub-pixel on the screen (in blue) and according to the Toshiba info in the box, this is normal and does not return.

  Should I worry about this?

  3. when I run the test memory at the start of the system, she says she'll start windows automatically at the end of the trial and show me the results of the test.

  It performs the test, Vista boot, but I see no reports of results.

  Where can I find the report?
  Is there a known issue with this test?

  4. the service program Toshiba to perform diagnostics of slot Vista does not work. Whenever I run the test (PCdiag.exe) I get an error message Vista saying a defect was found in the KERNEL32.dll module.

  Where can I get a fix for this?
  I have already installed the updated files on the Toshiba web site for the "Value Pack", which is where this utility, but still not the error message.

  5. I want access the settings of the bios at startup, but have not found a way to do it again.
  F2 gives me a menu for memory test or normal boot system.
  ESC is not me in bios Setup either.
  There is a utility for bios Toshiba that I can run Vista, and I see that any upgrade bios firmware should also be done through Vista.

  Is there a way to access bios at startup?

  6. I would like to run XP on this system and realized that this model (Pro L300 PSLB1E) is compatible XP, and I should be able to download all the drivers from Toshiba to run under XP.

  Does anyone do this?

  7. the laptop and configured Vista Basic when I did the first power on, but the license sticker on the bottom of the laptop has a product key for "Vista OEMAct Business." I was captivated by this laptop as the option to revert to XP Pro with Vista business. The box did not come with any CD or DVD and no manuals explaining how to install Vista Business.

  This is reason enough to return the laptop in the store where I bought it, which is a chore, I prefer to avoid if I can install Vista Business.

  Can someone help me understand what is happening here?

  8. is there a way to contact technical support by e-mail?

  Thanks in advance to anyone who can answer all of these questions!

  Hello

  Two weeks ago, I worked several days on friends Satellite Pro L300. Your questions are interesting and I will try to provide an answer or comment.

  1 this is normal behavior. I noticed it on other models of computer laptop too. Right now I use Satellite P200D and I noticed the same thing.

  2. of course, you may have noticed a dead on the screen pixel and more on what you can read on
  http://APS2.toshiba-tro.de/KB0/TSB5400ZD0002R01.htm
  http://APS2.toshiba-tro.de/KB0/FAQ8702EI0000R01.htm

  3. maybe follow links can help a better understanding:
  http://web1.Toshiba.ca/support/TechSupport/TSBs/all/-TSB001369.htm
  http://www.bleepingcomputer.com/tutorials/tutorial146.html

  4. what to say about this? I t has not noticed this error and I can recommend just reinstall full VAP. Remove preinstalled system, restart your computer and install the latest version of the Toshiba download page.

  5. When you start the laptop downstairs you can find info how to enter the BIOS settings. It usually takes F2. I really don't understand what is wrong in your case, but must work F2. Press immediately after turning on your laptop. Press several times. You have to work

  6. If you can find the download page of drivers, tools and utilities on Toshiba Windows XP Home edition, you should be able to install and configure Windows XP Home edition on this model of laptop. For the installation of Windows XP edition family please use Windows XP SP2 home edition.

  7. This must be clarified with your local dealer. The fact is that Toshiba doesn t offer any CD/DVD and recovery DVDs must be created by the owner of the laptop. I presume that you didn t seen or read Toshiba reminder about it. This point explains exactly what needs to be done.
  The recovery media can be created using the preinstalled Toshiba Recovery creator. The shortcut is placed on the desktop.

  8. I'm afraid, you must contact the hotline, but as far as I know Toshiba's toll-free hotline.
  Call and ask if there is something you want to know.

  Good luck!

• Cannot start the network connection: invalid access to memory location

  Hi team,

  Windows 2003 SP2 cannot start the network connection. Error connections network service terminated with the following error: invalid access to memory location.  Can you help me on this issue?

  Thank you

  Sangaré

  Hello

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the Windows Server 2003 Forum. You can follow the link to your question:

  http://social.technet.Microsoft.com/forums/en-us/winserverPN/threads

• Error of 0x8007042c, cannot start the Windows Firewall

  Original title: error 0x8007042c, you cannot start the Windows Firewall

  Help

  I can't have the windows firewall to install and run...

  I have a picture of a mistake, but I don't know how to post the photo of the error here.

  Firewall Windows cannot change some of your settings
  Error code;   0x8007042C

  Concerning

  Bill

  E-mail address is removed from the privacy *.

  Old man again on XP PRO

  Hi Dan,.
   
  You might have a corrupted user profile, I'd like you to create a new user account and test the question.
  http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account
   
  Aziz Nadeem - Microsoft Support

  [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]