Cannot start the unit because the authorization service is not running - cannot start service

Similar Questions

• Some time ago I bought Photoshop Elements in the apple App Store. I worked well. Now, if I try to start the application I get the message "Please do not run this application within this application package. On the other hand, it please launch Adobe Photos

  Some time ago I bought Photoshop Elements in the apple App Store. I worked well. Now, if I try to start the application I get the message "Please do not run this application within this application package. "Instead, please run Adobe Photoshop elements 13 of your Application folder. I tried this but it does not work. What to do to run the program?

  Follow these steps, Editor does not start | Mac App Store version

• Removed from Garmin using MSconfig and now I can't print. The print spooler is not running

  I wanted to speed up my computer and remove an item off my msconfig.  Now I can't print. missing spooler.  What should I do?  I tried dating back to some time earlier, but all previous changes are missing

  Operation could not be performed.  The print spooler is not running

  the question I wanted to delete was for Garmin

  don101947

  Hello

  I don't know if you have already solved the problem of the other answer, but here's something you can try if your not confident using the command line.

  Go to [start],-> [Control Panel]-> [administrative tools]-> [Services]

  Depending on if your running XP, Vista or 7 you can have 2 tabs at the bottom of the window you see.

  Select [Standard] if its not already selected. If you already have a large list, skip this step.

  Scroll down and find the print spooler. Double click it, and then set the "Startup type" to [Auto]

  then click [OK] and then make a right click again print spooler and select [start]

• If I downloaded the program from the site but do not run or install ammyy, is my computer safe? Are my other computers in the House at risk if they were not present?

  I went ammyy.com, makes the download - but do not run or install it - bailed on the idea and hit the 'x' renunciation instead.  Is my computer safe? Also are the other computers in the House if they were not on.

  I went ammyy.com, makes the download - but do not run or install it - bailed on the idea and hit the 'x' renunciation instead.  Is my computer safe? Also are the other computers in the House if they were not on.

  I don't know which is the site of ammyy, and I don't know what you have downloaded. If you just downloaded a file and tried not to install or run, there are no danger to him, niether to your computer or any other. If you think it's dangerous, just delete it.

• Printer properties cannot be displayed. The print spooler is not running.

  I followed the MS KB "file sharing and printers with different versions of Windows" for instructions on connecting my new Win 7 PC to several domestic XP PC in my network. However, once that I had on the right by clicking on the printer for XP to share, popup message "printer properties cannot be displayed. The coil of the printer does not work. This has happened even when clicking on the properties of the printer. I'm stuck now and need guidance on what to do. Thank you!

  Here are the steps of general network troubleshooting. Just cannot apply to your situation, so just take the bits that are. It may seem daunting, but if you follow the steps in the links and suggestions below calmly and consistently, you will have no difficulty to implement your sharing.

  Problems sharing files between computers on a network are usually caused by 1) a misconfigured firewall or a firewall neglected (including a dynamic firewall in a virtual private network); or (2) inadvertently run two firewalls such as the firewall of Windows and a third-party firewall. and/or (3) do not have accounts to the same users and passwords on all computers in the workgroup. (4) tries to create actions where the operating system does not.

  In Windows 7, go to control panel > everything in Control Panel > network and sharing Center. Click on "change the advanced sharing settings. You don't want to use the residential group unless you have all Windows 7 machines. If you do and you want to use the homegroup, see Windows 7 Help & Support. Otherwise, in sharing advanced:

  Discovery of plug in the network
  Open the files and printers sharing
  Turn on the sharing section Public folder sharing
  Plug the password protected sharing

  A. configure the firewall on all machines to allow traffic to local area network (LAN) as being approved. With the Windows Firewall, turning on window file sharing and printer as the above will take care of that for you. If you are not running a third-party firewall or you have an antivirus/security with its own firewall component program, then you're fine.  With a third-party firewall, I usually set up the allocation of LAN with an IP address range. E.g. would be 192.168.1.0 - 192.168.1.254. Obviously you would substitute your correct subnet. Refer to the safety of any third party program or the user forums for how to correctly configure its firewall. Do not run more than one firewall. DON'T STOP FIREWALLS; CONFIGURE THEM CORRECTLY.

  (B) to facilitate the Organization, put all computers in the same workgroup. This is done from the System applet in Control Panel, the computer name tab.

  C. create the counterpart of the user accounts and passwords on all machines. You do not need to be logged into the same account on all machines and assigned to each user account passwords can be different; accounts/passwords just need to exist and to match on all machines. DO NOT NEGLECT TO CREATE PASSWORDS, EVEN IF ONLY OF SIMPLE. If you want a machine to boot directly to the desktop (a particular user account) for convenience, you can do this:

  Start > Search box > type: netplwiz [Enter]
  Click continue (or provide an administrator password) when you are prompted by UAC

  Uncheck "users must enter a user name and password to use this computer". Select a user account to connect automatically by clicking on the account you want to highlight and press OK. Enter the password for this user account (when it exists) when you are prompted. Leave blank if there is no password (null).

  XP - set up Windows to automatically connect (MVP Ramesh) - http://windowsxp.mvps.org/Autologon.htm

  D. Si one or more of the computers on your network are XP Pro or Media Center, turn off Simple file sharing (Folder Options > view tab).

  E. create share as you wish. In Windows 7 I usually share the Desktop of the user and the Public directory.

  F. you have the job of file sharing (and tested by exchanging a file between machines), if you want to share a printer connected locally to one of your computers, share of this machine. Then go to the printer mftr Web site. and download the latest drivers for the correct system. Install them on the target machines. The printer must be collected during the installation procedure. If this isn't the case, install the drivers and then use the Add Printer Wizard. In some cases, printers must be installed as local printers, but it is outside this response. MS - MVP - Elephant Boy computers - don't panic!

• I have a html file and in it, I have a PHP contact form. However, the html code does not run php. pls help... Thank you

  I wrote a simple html Web page with menus and pull-down (using Dreamweaver) which also includes a contact form. The contact form is in PHP. However, when I run the html file, all right and that the contact form appears, however, she does not run PHP code. Do I have to make any changes of setting or download all the files? Thank you very much

  If you run your own apache server, then you need also a mail server, but if you use a hosted service then your host should have the scripts and HTML on their Web site.  Otherwise, you can use Wufoo free version and you can create your own form and code (JavaScript) that can be integrated into your HTML page. I used Wufoo in Joomla sites and it works very well.

• Incompatible program, the .msi file is not running

  I try to install a program on my new 64-bit Sony Vaio, by using the .msi file that I got with the program provider.

  It has worked great on my Dell E6400 previos.
  Error information: "the Installation ended prematurely because of an error".

  When program compatibility testing, I get the 'Incompatible program' output.

  According to the manufacturer of only the. MSI.file runs on 64-bit machines of "all other computers" including.
  The problem seems to occur only on my PC...

  Any suggestion on what to do?

  Thank you and best regards,
  Sten B

  Hi Sten,

  This error can usually be resolved by emptying the temp folder.

  Method 1: Delete the contents of the Temp folder and check if that helps.

  a: Click on Start > run

  b: Type folder , and press ENTER.

  c: Now remove everything inside this folder.

  Method 2: Run the Fixit and check if it helps.

  Solve problems with programs that cannot be installed or uninstalled

  Good day!

  Get back to us if you are having problems.

  Hi Jessen,

  Thank you for your answer!
  I tried, but it did not help.
  However, the solution that my local Consultant of the PC came with was 'no GUI', he turned off the GUI (for as far as I understand). In my view, that it changed the .msi file by adding this command.
  Best regards
  Sten.

• No option in the wizard power tab helps to check the battery and can not run standalone Tester

  HP Pavilion dv3t-2000 CTO Entertainment Notebook PC

  Windows 7 64 bit

  My laptop started to turn off the power as soon as I unplugged it, reading online, it seems that there is a problem with the battery (he acting funny recently, as soon as I unplug it go to 77%, then back to 100% as soon as I plugged it it would support in).

  I went to run the battery check HP Support Assistant breast, but I don't see this option, down he wrote 'Loading' for details of my system little matter how long I let it run.

  I downloaded the version independent battery check but it wouldn't install, it says that I need to run the test of in support Assistant.

  I also went to http://h20614.www2.hp.com/ediags/gmd/ProdDetect4Mozilla.aspx?lc=en&cc=us to analyze my system, but that also does not work, something on a runtime error and then blocks the ActiveCheck plugin.

  Your laptop is a custom model. Try to use the product number and order it on the following link:

  http://PartSurfer.HP.com/search.aspx

• Older version of the windows application does not run on Windows 7 64 bit

  I replaced my PC which had Win 7 32 bit with a new one running Win 7 64 bit.   Tried to run my application on the new PC, but without success with the message box 'version of this file is not compatible with the version of Windows you are using.  It worked fine on my previous PC.  How can I overcome this.

  Hello

  Please contact Microsoft Community.

  I understand that you are unable to run programs on the new computer.

  I will definitely help you with this.

  I suggest you go through the link below:

  Refer to the suggestion given by Marilyn O replied on September 20, 2010:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_programs/this-verison-of-this-file-is-not-compatible-with/0c6a4c8e-1416-47a5-b6b4-6d10a82942da

  I hope this helps. Please post back with the State of the question and we will be happy to help you further.

• SELECT the view queries do not run unless the shared_pool hot flashes

  Hello

  Need some urgent advice

  We have a system that we are trying to run a simple select statement on a view (nested).

  in a first time - it gives a result in less than a second. After that, it takes an hour.

  Flushing the shared_pool, she will run again in less then a second... and then again an hour.

  flushes of heat if the shared_pool will solve it for a single run.

  I have already increased the shared_pool and it did not help... linux db system is 11.2.0.3.

  parameters:

  SGA_MAX_SIZE 6509559808

  shared_pool_size 2147483648

  pga_aggregate_target 1887436800

  Thank you

  ORI

  You could get an execution plan different for various reasons. Maybe the comments of cardinality: you might try setting _optimizer_use_feedback = false.

• the custom transformation does not run against logic model

  Here is the screen [http://img849.imageshack.us/img849/7411/20110530174314002.jpg | http://img849.imageshack.us/img849/7411/20110530174314002.jpg]
  
  In addition to the definition of the logical = object that the script against the relational model. To prove this, have a script to collect all the table names, and have different names in the two models.

  There are scripts works on the logic model - ability to auto create a primary key column when creating an entity?

  Philippe

• What is the problem? Why not running successfully?

  I created the project Interact and CoherenceCache class according to the guide tutorial for Oracle coherence (Chapter 7).
  Also, I did the config.XML of cache - according to the tutorial and added to the Run/Debug/Profile the CLASSPATH.
  I added the coherence.jar and the oracle JDBC jar file to the project library.
  
  But when I ran the CoherenceCache class with JDeveloper tool, it displays the following error message:
  

  G:\jdeveloper10\jdk\bin\javaw.exe -client -classpath "G:\jdeveloper10\jdev\mywork\AppInteract\ Interact\classes;G:\jdeveloper10\jdbc\lib\ojdbc14dms.jar;G:\jdeveloper10\jdbc\lib\orai18n.jar;G:\jdeveloper10\jdbc\lib\ocrs12.jar;G:\jdeveloper10\diagnostics\lib\ojdl.jar;G:\jdeveloper10\lib\dms.jar;F:\coherence\coherence\lib\coherence.jar" -Dtangosol.coherence.cacheconfig=G:\jdeveloper10\jdev\mywork\AppInteract\Interact\cache-config.xml com.oracle.coherence.handson.CoherenceCache
  2009-11-02 16:11:44.437/0.437 Oracle Coherence 3.5/459 <Info> (thread=main, member=n/a): Loaded operational configuration from resource "jar:file:/F:/coherence/coherence/lib/coherence.jar!/tangosol-coherence.xml"
  2009-11-02 16:11:44.437/0.437 Oracle Coherence 3.5/459 <Info> (thread=main, member=n/a): Loaded operational overrides from resource "jar:file:/F:/coherence/coherence/lib/coherence.jar!/tangosol-coherence-override-dev.xml"
  2009-11-02 16:11:44.453/0.453 Oracle Coherence 3.5/459 <D5> (thread=main, member=n/a): Optional configuration override "/tangosol-coherence-override.xml" is not specified
  2009-11-02 16:11:44.453/0.453 Oracle Coherence 3.5/459 <D5> (thread=main, member=n/a): Optional configuration override "/custom-mbeans.xml" is not specified
  
  Oracle Coherence Version 3.5/459
   Grid Edition: Development mode
  Copyright (c) 2000, 2009, Oracle and/or its affiliates. All rights reserved.
  
  Exception in thread "main" (Wrapped: Failed to load the factory) java.lang.reflect.InvocationTargetException
       at com.tangosol.util.Base.ensureRuntimeException(Base.java:293)
       at com.tangosol.net.CacheFactory.getConfigurableCacheFactory(CacheFactory.java:607)
       at com.tangosol.net.CacheFactory.getCache(CacheFactory.java:686)
       at com.tangosol.net.CacheFactory.getCache(CacheFactory.java:664)
       at com.oracle.coherence.handson.CoherenceCache.putCache(CoherenceCache.java:11)
       at com.oracle.coherence.handson.CoherenceCache.main(CoherenceCache.java:21)
  Caused by: java.lang.reflect.InvocationTargetException
       at sun.reflect.NativeConstructorAccessorImpl.newInstance0(Native Method)
       at sun.reflect.NativeConstructorAccessorImpl.newInstance(NativeConstructorAccessorImpl.java:39)
       at sun.reflect.DelegatingConstructorAccessorImpl.newInstance(DelegatingConstructorAccessorImpl.java:27)
       at java.lang.reflect.Constructor.newInstance(Constructor.java:494)
       at com.tangosol.util.ClassHelper.newInstance(ClassHelper.java:662)
       at com.tangosol.net.CacheFactory.getConfigurableCacheFactory(CacheFactory.java:602)
       ... 4 more
  Caused by: (Wrapped: Failed to load configuration resource: G:\jdeveloper10\jdev\mywork\AppInteract\Interact\cache-config.xml) java.io.IOException: Configuration is missing: "G:\jdeveloper10\jdev\mywork\AppInteract\Interact\cache-config.xml", loader=null
       at com.tangosol.net.DefaultConfigurableCacheFactory.loadConfigAsResource(DefaultConfigurableCacheFactory.java:392)
       at com.tangosol.net.DefaultConfigurableCacheFactory.loadConfig(DefaultConfigurableCacheFactory.java:343)
       at com.tangosol.net.DefaultConfigurableCacheFactory.loadConfig(DefaultConfigurableCacheFactory.java:315)
       at com.tangosol.net.DefaultConfigurableCacheFactory.<init>(DefaultConfigurableCacheFactory.java:143)
       ... 10 more
  Caused by: java.io.IOException: Configuration is missing: "G:\jdeveloper10\jdev\mywork\AppInteract\Interact\cache-config.xml", loader=null
       at com.tangosol.net.DefaultConfigurableCacheFactory.loadConfigAsResource(DefaultConfigurableCacheFactory.java:376)
       ... 13 more
  Process exited with exit code 1.

  It does not resemble the space was removed from the classpath.
  -Dave

• Cannot install updates due to error code 0 x 80246008 and the BITS service is missing from the XP computer.

  Recently, I reloaded a fresh load XP on my laptop.  I was able to install SP3 and IE8, despite not being able to download them directly from the Windows Update site.  I tried several times to install updates, one, five and all at the same time and is unable to install.  I ran Fixit to many times and it says it solves some problems, but no single instance doesn't solve all of them.  I also tried to update after the launch of a clean boot, always to nothing does not.  I see many solutions on this and other Microsoft sites and I tried, but nothing seems to change the results.  FixIt has reported the following:

  -------------------------------------------------------------------------------------------------------------------------------------

  Details of the update of Windows editor

  Problems found
  Registration for the service is missing or corruptService registration is missing or damaged do not fixed
  Sign up for the service Reset Succeeded
   
  Problems installing recent updatesProblems recent updates installation not fixed
  Fix Windows Update succeeded
   
  Problems installing recent updatesProblems recent updates installation not fixed
  Fix Windows Update succeeded
   
  Check verrouillesfichiers missing or damaged missing or corrupt files fixed
  Repair missing or corrupt files Succeeded
   
  Windows Update, error 0x8024402C (2013-11-28-T-09_56_27A) 0x8024402C(2013-11-28-T-09_56_27A) of fixed Windows Update error
  Reset Windows Update of the data store Succeeded
   
  Verified issues
  Environment variables Windows Update are of incorrect update environment variable incorrectWindows Checked
  Some security settings are missing or have been changedSome security settings are missing or changed Checked
  Key of registry corrupt Patch registry Patch keysCorrupt
  Detects the hotfix or corrupt cache Checked
  Windows Update services aren't runningWindows update services do not run checked
  Encryption services components are not the registeredCryptographic service components are not registered Checked

  Problems found details

  Registration for the service is missing or damaged do not fixed
   
  Sign up for the service Reset Succeeded
   
   
  Recent updates installation problems not fixed
   
  Fix Windows Update succeeded
   
   
  Recent updates installation problems not fixed
   
  Fix Windows Update succeeded

  Check missing or corrupt files fixed
   
  Repair missing or corrupt files Succeeded
   
   
  Windows Update error 0x8024402C(2013-11-28-T-09_56_27A) fixed
   
  Reset Windows Update of the data store Succeeded

  Issues checked the details of the detection

  6 environment variables Windows Update are incorrect Checked
   
  Restore the Windows Update environment variables is not running
   
   
  Some security settings are missing or changed Checked
   
  Reset the security settings is not running
   
   
  Key of registry corrupt Patch Checked
   
  Detects the cache fix corrupted or missing
  Fix registry patch not working
   
  Fix registry patch problems
   
  Windows Update services do not run checked
   
  Required for Windows Update registry files works not
   
   
  Encryption services components are not registered Checked
   
  Save the cryptographic components not working

  Details of detection

  The service status

  ---------------------------------------------------------------------------------------------------------------

  Can someone point me in the right direction to solve this problem?

  Thank you.

  Original title: Windows Update will not install on the new load XP

  Hi all

  Thanks for your replies.  Sorry I didn't answer sooner, but he got late last night, and I got to reregister the Qmgr.dll and Qmgrprxy.dll BITS files.

  I clicked Start, click on run and typed the command following, and then click OK:

  Start, run and in the run box, Type regsvr32 qmgr.dll, click OK.
  Start, run and in the run box, Type regsvr32 qmgrprxy.dll, click OK.

  I was then able to start the updates.  There are 124 updates, the Microsoft .NET Framework 3.5 Service Pack 1 and the .NET Framework 3.5 Family Update for versions of .NET 2.0 to 3.5 (KB951847) x 86.  He downloaded 124 updates, but even once asked me to insert the disc for qmgr.dll when he was installing the 10th update.  I find the qmgr.dll file again and pressed OK, but it seems to hang forever and do nothing, then I simply cancelled updates and closed during the night.  I have been relieved to have solved the problem of BITS, but is concerned by the hang up on the tenth update installation and he called again for the qmgr.dll file during the installation of updates.

  This morning, when I rebooted, it installed some updates at startup, and I restarted again.  He then held I first install the .NET Framework 3.5 Service Pack 1 and the .NET Framework 3.5 Family Update for versions of .NET 2.0 to 3.5 (KB951847) x 86 to date.  N BITS issue for that.  It took time, but completed settle.  Restart again and now there are only 21 updates to high priority required.  My guess is that he downloaded all 124 updates last night, but when I cancelled the installation after hanging on #10, he just started to install it again this morning and did so successfully.

  However, when I try to install the 21 remaining, he has not once again, and I find that the BITS service is not in the services again.  After I have re-enter the BITS service and restart it, the downloads are working again.

  I am now what I may need to reinsert and restart the BITS service whenever I need to download an update.

  Ideas, suggestions or comments?  I am slowly solve problems and if I persist, I can get this all taken care.

  Hi Dan,.

  From what you wrote, I understand where you are getting confused. Here are the steps to follow to solve this problem.

  Open the Windows search tool, copy / paste the following text, and then click Search: qmgr.dll

  Research should show this file in the following locations:

  C:\Windows\System32
  C:\WINDOWS\ServicePackFiles\i386
  C:\WINDOWS\system32\bits

  I hope they are all present, follow these steps to register the service.

  Click on start, run and copy/paste: regsvr32 qmgr.dll and click OK
  (If you do not have the command run in the start menu, hit the Windows key + R, instead)

  Do the same with this file: regsvr32 qmgrprxy.dll and then restart.

  Here are the next steps.

  Copy / paste this command in the field to run, and then click OK
  %windir%\System32\rundll32.exe setupapi, InstallHinfSection DefaultInstall 132 %windir%\inf\qmgr.inf

  Windows will launch a dialog box asking you to insert the Windows installation CD. Ignore this and change the way downstairs to C:\WINDOWS\ServicePackFiles\i386

  The reason to change the path to the i386 folder is that the files that are there are newer than those on the Windows installation CD.

  Then restart the PC again and continue with the rest of the troubleshooting steps.

  Click on start, run and copy/paste the following and click OK: services.msc

  You should now be able to see the Background Intelligent Transfer Service, or just "BITS" displayed in the list of Services.

  Double click it to open BITS and then click on the Start button. This is just a test to make sure that it works correctly.

  If you get 2 error: cannot find the specified file, click on start, then run again and copy / paste the following command, and then click OK:
  Tracking Add HKLM\SYSTEM\CurrentControlSet\Services\BITS\Parameters /v ServiceDll /t REG_EXPAND_SZ /d %windir%\System32\qmgr.dll

  Restart then try and start the BITS.

  If you get the same error again, copy / paste the following text in the field run and click OK:
  Reg add HKLM\SYSTEM\CurrentControlSet\Control\BackupRestore\FilesNotToBackup

  Reboot once more and then try and start the BITS.

  Let me know how you please.

• "Printer properties cannot be displayed. The print spooler service is not running. "(even when it works)

  When I click with the right button on a particular printer and try to view the properties of it, I get the following message:

  Printer properties cannot be displayed.  The print spooler service is not running

  It is, it is run as go to-> Services administrative tools in the Control Panel checks.

  One of the 'printers', I installed is "send to OneNote 2007".  I can click right on this very well - just not this another printer. I'd be able to do if the print spooler is not running?

  Indeed, if I turn off the print spooler, * all * printer in "Printers and faxes" disappear.  So the fact that I'm still see them first place suggests to me that the printer spooler is running.

  I posted this on Microsoft.public.windowsxp.general a while ago and someone suggested that I visit this site .  Problem is C:\WINDOWS\system32\spool\PRINTERS is empty.  It is empty when the print spooler is running and it is empty when it is not.

  Also, I was unable to install KB896423 since I am running SP3.  Try to install he did the following:

  Setup has detected that the version of Service Pack for this system is newer than the update you are applying.

  There is no need to install this update.

  The printer is a "local printer attached to this computer" connected via a "Standard TCP/IP Port".  Personally, I think such a printer should be called "a network printer or a printer attached to another computer", but that is the terminology used by the "Add Printer Wizard".

  Hello terrafrost,.

  Thank you for visiting the Microsoft answers community.

  What is the model number of the printer that you are using?

  Printing a "Standard TCP/IP Port, is used for a printer that is directly connected to a network, not on your local system.

  I would try to uninstall your printer and reinstall your printer.

  Hope this helps Chris.H
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Install the printer driver HP LaserJet 3100 for Wind.XP worms. 1.1 the installation program does not start.

  An older version of Jet Suite Pro for HP Laser Jet 3100 for Win 2000 /NT 4.0 had run under XP (with an error during systemstart).

  After an update of Windows XP or this SW Jet Suite Pro to clean record no longer works.

  A new t CD - ROM HP with HP LaserJet 3100 Printer Driver Version 1.1 for Windows XP SW starts and stops after some time.

  The installation program does not run.

  At the stop "WOW. EXE does not react "."  "Waiting times for 16-bit system subtask ends." Part.System if necessary. instability.    End with OK Win16 system.

  HP after reclamation / question without help until today.

  Dieter Jansen

  Hello

  I suggest to Uninstall all the HP Laserjet Printer drivers and then try to install.

  For the second question, you need to perform a clean boot to find the program that is causing and then disable or remove.
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353/en-us
  Note: When you are finished troubleshooting, follow the steps as explained in the article to reset the computer to start as usual.