Cannot start Vista somehow without BSOD, including Mode without fail & last known--IRQL_NOT_LESS_OR_EQUAL

Similar Questions

• Cannot start Windows 'Normally' or in 'Safe Mode '.

  A lot of problems with USB drivers, I found an answer in the forums here, who directed me to the site to download the appropriate drivers for my chipset from Intel.  Download seemed to go OK; When asked "reboot now?" I selected Yes.  In about 30 seconds, I had a window (similar to the command prompt) asking if I wanted to start the computer in the last good known?  He also had options to start in Safe Mode, Safe Mode with networking, and Safe Mode with command prompt.  I first tried to start normally, but without success.  I then tried the other option (several times), none were successful.  I turned off the computer using the power button and then it starts again, but nothing helped.  The four options have failed once again.  The main thing is I'm unable to get the computer started in any Mode, so that I might be able to fix the problem.  I'm afraid I might have to reinstall Windows, once again.  The computer is running Windows XP Home Edition, SP 3.  I use my wife's cell phone to access the forums.  Any help will be greatly appreciated.

  WOLLAM

  Well, if you some drivers day and now have a problem in your Startup Options menu, you must first choose the option best suited for these kinds of my system does not start after an update types of problems:

  Last good known Configuration

  Last good known Configuration is the configuration XP saved the last time that Windows starts successfully and choosing that option can allow you to start long enough to undo (roll back) what that either got your first distressed system.

  If the system starts with the last known good Configuration, uninstall (restore) the update of the afflicted driver and get the right drivers for your system.

  If you still can't boot from your Startup Options menu, choose the option:

  Disable the automatic restart in the event of system failure

  Then you can see a Blue Screen of Death with information that will help solve your problem.

  Here's a BSOD example showing information you provide:

  http://TechRepublic.com.com/i/tr/downloads/images/bsod_a.jpg

  Please vote my posts as helpful so I can get a lot of points. I'm saving for a pony! Everybody don't like Raymond.

• cannot start the computer without disconnecting the graphics card

  I'm having a strange problem.

  Recently my computer has started doing something funny.  If I choose restart, or stop and start the computer too fast, it does not start.  He posts about 3 times then won't start.  If I unplug the graphic card and let the beep from the motherboard error on the code, and then close it, plug it back and it starts.  It's really weird and I don't know where to start troubleshooting.

  Here are my system specs:

  OS: Vista 64

  Processor: Intel Core 2 Quad Q6600 @ 2.40 GHz (4CPU), "2.4 GHz

  Motherboard: Biostar T-Power I45

  Graphics card: NVidia GE Force 9800 GX2

  Any help would be great because I just had to reinstall windows, and there restart every time I install a program, and with this error it takes me about 10 minutes to start again.

  Thank you!

  Hello

  You've got a video that can interfere? Settings/Setup (BIOS/CMOS) often as F2
  you start so watch the screen for the key. Disable the integrated video if activated.

  If it does not help it sounds like you need technical support in a real store of the computer (not leeks and)
  Displays a BestBuy or some other BigBox store) or system manufacturer support.

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Cannot start log_monitor.exe without installation install Thinapp

  Hello

  In the Thinapp documentation 5.1 is saying that you can copy only specific files from log_monitor to run log_monitor.exe, but I can't do the error messages. I have no problem to launch the application, if I install the

  Thinapp application.

  We want log_monitor availble VDI desktop VM for an easier repair of Thinapps, but we can not install Thinapp because if licensing.

  Thinapp documentation links:

  http://pubs.VMware.com/ThinApp-51/index.jsp#com.VMware.thinapp51.Userguide.doc/log_monitor_format.html

  I tried to copy the following files in system32 directory:

  capture.ini

  log_monitor.exe

  Logging.dll

  logging64.dll

  but I get this error message:

  

  I just tried to copy the files in System32 folder on Win7 64 machine and observed the same error. However, this issue is not observed on Win7 32 machine.

  To work around the problem, please copy the files to a folder on the C drive and run log_monitor.exe. It works for me.

• Cannot start windows vista Basic... its keep restarting

  I started Windows... He goes to the page saying installation updates 3/3 0% complete do not turn off computer.

  then it shout down itself and start again from the same page... its keep repeating

  Tried, restoration of the previous point, tried to repair, attempted to open in safe mode, try the last known good configuratiuon etc... but no woreked... the same process keep repeting... can not turn off the system... unless I force him to stop... .Re to go back to the same page

  Help, please

  I did a disk cleanup and defregmentation yesterday and shout down the computer... but it never shout down since

  friend sorry, I tried all things but does not work.

  I started in safe mode, but afterbootingup it directly shows the window shutingdown and say ' updated lists: stage 3 3-0% complete don't have broad computer trun ' and then it shows "blocking down."

  and the computer restarts with the same process

  Help, please

  Do you have a recovery CD? If you try to back up your files first!

  then the system restore, if it does not, try to restore your system!

  Contact the manufacturer of your pc to ask them how can rocver your system, they allow u a, if they can, then you might have to pay! Normally, they provide a software on your pc to create recovery cd become! If you do not have or do not know, you will need to contact them.

• Mac cannot start after el captain

  Cannot start after updating mac

  Safe Mode boot removes the system caches that can help after an OS X day or level.

  Follow these steps to start in safe mode.

  1. Start or restart your Mac.
  2. As soon as you hear the startup tone, hold down the SHIFT key.
  3. Release the SHIFT key when you see the logo Apple appears on the screen.

  After the Apple logo appears, this may take longer than usual to reach the login screen or your office. This is because your Mac performs a check of directory of your drive to boot in safe mode.

  To leave safe mode, restart your computer without pressing any keys during startup.

  Try safe mode if your Mac does not end commissioning

• Could not start service windows drivers Foundation-User-Mode Driver Framework on the local computer, error 31: a DVICE attached to the system does not work

  When I go to start the Service for Windows drivers Foundation I get the following error message, cannot start service window drivers Foundation-User-Mode Driver Framework on local computer, error 31: a device attached to the system is not functioning

  I was not able to find an answer in help

  Unless you write your own drivers for XP and using the Windows Driver Foundation Service to help you debug, you can disable the WDF Service.  It will be one less point to start your system and will not not just sitting there working day and night with nothing to do.

  On some systems, if WDF is activated, you can begin to see some errors of svchost.exe like this:

  Application error: the instruction at "0x7c91b21a" referenced memory at "0x00000010". Memory could not be "written".

  The best solution for this problem is: disable the WDF Service.

• XP does not start normally. Must use the F8-last known good configuration.

  For the last three days, XP does not start normally. I use F8 and you select last known good configuration that worked. It gets old. If I try to boot normally, it freezes on Autontfs not found I have a MSI wind Pc with Windows XP Service Pack 3.

  Hello Susanherna,

  The last known good configuration is created during the logon process. This means that something has changed between the time that connect us and time that shut down us the computer.

  At the next startup, select instead of last known good configuration safe mode.

  We want to then try a clean boot.

  The following articles describe this process on Windows XP:

  http://support.Microsoft.com/kb/310353

  http://support.Microsoft.com/kb/316434

  Let us know what are the results of this and we will continue from there.

  Best regards

  Matthew_Ha

• Ms more recent update for my VISTA plus old (2008 Acer laptop) was the last event, now cannot start PC... recovery tests without success... Help, please...

  Ms more recent update for my VISTA plus old (2008 Acer laptop) was the last event, now cannot start PC... try to recovery without success, a loop back and asking to recover or normal boot...  Attached to jumps, safe to ask if I want to recover...  I never received an OEM of VISTA version, but the first time having problem after all these years...   Help, please...  Would contribute to a boot disk, if so, how can I get a copy?...  Thanks, Dave * address email is removed from the privacy *

  Hello

  See if that helps you.

  Do a Safe Mode system restore to before the problem started.

  http://bertk.MVPs.org/html/restoresysv.html

  How to access Safe Mode

  http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  If it doesn't, try a startup repair and / or a system restore using a DVD of Vista from Microsoft

  Manufacturers recovery disks normally do not have Service Options; they are normally a relocation to the factory only settings option.

  Here is the guide to repair Options using a Vista DVD from Microsoft.

  If a friend or a work acquantance of yours has one, you can borrow and use it for repairs.

  http://www.bleepingcomputer.com/tutorials/repair-Windows-with-Windows-Startup-Repair/

  Table of contents

  1. Overview of Windows Vista repair options
  2. How to perform an automatic repair of Windows Vista using Startup Repair
  3. Advanced Tools Overview
  4. Conclusion

  If you do not or can not borrow a Microsoft DVD there is a download of a file ISO of Vista Startup Repair available that you can put on a Bootable floppy to make the above startup repair and that the method is recommended by a large number of posters in these Forums.

  Unfortunately, you have to buy it.

  Here is a link to it:

  http://NeoSmart.net/blog/2011/Windows-Recovery-discs-updated-reinstated/

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  And here's how to use Recovery of Acer.

  http://Acer.custhelp.com/app/answers/detail/A_ID/2631

  To start the system recovery:

  1. Restart the computer.
  2. When the Acer logo appears on the screen, press the left Alt and F10 keys.
  3. If you are prompted with a Microsoft Windows splash screen, press the Enter key.
  4. After that the Acer eRecovery Management application is loaded, select your type of restore.
  5. Read the review and then click Next when you are ready.
  6. Click Next to start the restore process. It may take 10 minutes up to an hour fom anywhere to restore.
  7. Once the restore is complete, your computer will restart. After the reboot it will load Windows and start the installation of your software and drivers. Your computer will restart several times during this process. Once they are all completed, your computer will be like it was when you bought it first.

  See you soon.

• my HP Vista computer cannot start and stay sleeping mode.

  my HP Vista computer cannot start and always stayed at the sleeping mode. Help...

  Hello

  1. is it a desktop or laptop computer?

  2 have you made any changes to the computer before the show?

  3. what happens when you tried to wake the computer from sleep mode?

  Method 1:
  
  Step 1: Safe Mode

  Start your computer in safe mode and check the number.

  
  To start your computer in safe mode
  
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode
  
  Step 2: Clean boot
  
  If you are not facing the problem in safe mode, and then put your computer in a clean boot and search for the question.
  
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  
  http://support.Microsoft.com/kb/929135
  Note: once you are done with the boot, follow step 7 of article to put your computer to normal startup.
   
  I hope this helps.

• my vista operating system continues to run in a loop, saying: Configuring updates 3/3 0 full. Cannot start in safe mode or the other amounts to the same configuration problem

  System downloaded 2 of 3 updates. the third will not update and continues in a loop. Failed to start in SafeMode either. Don't know what to do.

  Hello

  as you cannot start in safe mode, try this

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

  or repost in the correct windows update forum

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-windows_update?page=1&tab=all

• BSOD in the Vista virus infection, no safe mode, restore the system or atartup repair...

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas: Hi guys.

  I have a problem I know is due to a virus.
  I downloaded a file I found was a plugin for Photoshop and the zip format file.
  I open the zipped file and it contained an .exe file I scanned with Mcafee, comes it back scanning without any problem with the file and I opened it. Then the screen went all multicoloured and froze. I rebooted and got the blue screen of death.

  I ran the recovery tools and getting no joy with repair or start System Restore.
  Memory Windows reported no problems with memory and I can see all my files in the command prompt window. I can't start my laptop computer in mode without fail or (BSOD)
  0X0000007E ERROR CODE (0 X 0000005, 0X85D98113, 0X8B36B780, 0X8B36B47C)

  I also run chkdsk c: /r and it stops at 73% on stage 5 and the need to be able to get back on, it happens every time on 73%
  I also tried sfc and its says that a system repair is underway and must restart... so cannot get SFC to work?

  Please can you help me get back, need my laptop to work?

  I use my laptop running Xp, so I can download files if I need to.

  The laptop I have to operate is under Vista.

  Any help please!
  Thank you very much

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hello

  You may be experiencing from reader that have nothing to do with the installation you did, even if it could have.

  Overdose - great job deep with these methods. Don't forget no no program can detect or remove
  all malware.

  It can be made repeatedly in Mode safe - F8 tap that you start, however you must also run them
  the Windows when you can.

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone. (If Rootkits run UnHackMe)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can download it here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with other security programs. It comes
  a scan only, VERY EFFICIENT, if it finds something to come back here or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  Also do to the General corruption of cleaning and repair/replace damaged/missing system files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  I hope this helps.

  Rob - bicycle - Mark Twain said it is good.

• Cannot start the Toshiba Satellite A300 in normal mode or safe mode.

  Original title: Normal and safe mode start two taped please wait

  Hi my problems started last night when I tried to open my laptop (Toshiba Satellite A300 Windows Vista)

  In normal mode starts near the top of the screen loads fine up please wait...
  I left on until this morning that then the screen turned black and nothing was clickable.
  I can't boot mode safe either, as it happens the same thing.
  Sometimes when I try and start it tells me that the C drive has something wrong with it and what are the fixing.
  A warning saying that this file is corrupted and unreadable left me with a scintillating display that fluctuated between black and the background of vista.
  I managed to log on once while my office quickly froze and I had to close my laptop.

  Startup Repair cannot detect all problems. I restore Windows to an earlier date with the system restore but that did nothing to help and when I tried to restore the system to an earlier date of even the sign of a catastrophic failure rises.

  I'm really ideas outside the restoration of factory settings.
  Someone please help.
  Thank you

  Hello

  
  Have you tried another recovery option?
   
  
  I suggest you to press the F8 key as the computer starts up to the top and check the option in the advanced boot menu.
   
  
  Advanced, including safe mode startup options
   
  
  http://Windows.Microsoft.com/en-us/Windows-Vista/advanced-startup-options-including-safe-mode-1
   
  
  If you are able to open the advanced boot menu then you can execute the menu command prompt and type the command and check.
   
  
  Type CHKDSK c:/r or
  
  Type CHKDSK c:/f
   
  
  Important: even if running chkdsk on the drive if any bad sectors are found, chkdsk attempts to repair this sector and if all data on this sector it could get lost.
   
  
  If you are not able to perform the steps then you may need to get the Vista installation DVD. You can contact the manufacturer for more details.

• My 8 victory... infected with the virus cannot start in safe mode...

  recently, my computer of windows 8 has a virus... (miss click an ad pop up and it's on the computer)

  I already got Malewarebytes Anti Maleware and installed AVG, but this virus that bypassed and infected my computer. I tried the standard F8 during startup to go into safe mode and run my anti virus scanners, but apparently it does not work in windows 8. Some say SHIFT F8, that does not work either. Also any other method of setting up safe menu starting boot or mode does not work as it should connect on the desktop to go threw the settings and activate it for the next boot upward. This does not work for me since the virus I have apprently made my fall display driver, after I get my user password to start the desktop computer, so I don't see anything but the pointer of the mouse, everything is black. Y at - it another way to start in safe mode or trigger a recovery system or restore without actually being on the desktop?

  Why windows might change?

  I already ordered a recovery disk as that seemed to be my only option. But the works of windows 8 way I will NEVER buy a computer with it again. Cannot start in safe mode and can't do the simplest task without being a great test. It's crazy. I thought that windows 8 was supposed to be simple and easy to use!

  Please reset your PC. The procedure is given in the link below:

  http://support.HP.com/us-en/document/c03546603

  If this does not help, recovery of the system to the factory settings. Consult the following document:

  http://support.HP.com/us-en/document/c03489643

• Cannot start Firefox, crash even in Crash Reporter. Not be able to start in safe mode either.

  Cannot start Firefox. He goes to Mozilla Crash Reporter every time. I can't even start it Safe Mode.
  I tried to uninstall and delete all the files related to Mozilla Firefox in & AppData & and each base registry with RegEdit.

  I have run, or at least try, on a system with Windows 7 64 bit, 8 GB RAM, 314.22 driver for Nvidia GeForce GPU and a CPU Intel Core i5 2500 k CPU.

  Little help would be nice.

  Hi deliubogdan

  Try to remove the extension DataMngr (Datamngr.dll)

  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes
  • [816181/questions/816181]

  Do a check with some malware malware, analysis of programs on the Windows computer.
  
  Please scan with all programs, because each program detects a different malicious program.
  
  All of these programs have free versions.

  Make sure that you update each program to get the latest version of their databases before scanning.

  • Malwarebytes' Anti-Malware:
    http://www.Malwarebytes.org/MBAM.php
  • AdwCleaner:
    http://www.bleepingcomputer.com/download/adwcleaner/
    http://www.Softpedia.com/get/antivirus/removal-tools/AdwCleaner.shtml
  • SuperAntispyware:
    http://www.SUPERAntiSpyware.com/
  • Microsoft security scanner:
    http://www.Microsoft.com/security/scanner/en-us/default.aspx
  • Windows Defender: Home Page:
    http://www.Microsoft.com/Windows/products/winfamily/Defender/default.mspx
  • Spybot Search & Destroy:
    http://www.safer-networking.org/en/index.html
  • Kasperky free Security Scan:
    http://www.Kaspersky.com/security-scan

  Alternatively, you can write a check for an infection rootkit TDSSKiller.

  • Utility anti-rootkit TDSSKiller:
    http://support.Kaspersky.com/5350?El=88446

  See also:

  • "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked