Cannot start vm converted from Server 2 to the ESXi4

Similar Questions

• "\?? \C:\Windows\Explorer.exe"cannot start or run due to incompatibility with the 64 bit version of windows

  A friend gave me your laptop to watch - there edition family vista (64 bit (I think) on it and when you try to run Explorer he says it does not find or access is denied and something about 16 bit / 64 bit (it has been a few days and I'm not memory clearly until what I try again tonight)

  "\?? \C:\Windows\Explorer.exe"cannot start or run due to incompatibility with the 64 bit version of windows"

  If you try to run a dll / Panel or anything like that, you will get an error message saying that it cannot run some 16-bit process or access denied.

  I did a lot of research on Google and nothing someone he said worked - which "everyone" giving full access to the C:\WINDOWS\Registration, executes a command secedit, a sfc/scannow, do a system restore to the point of older, make a new user account, start up in safe mode...

  So now I'm pretty stuck. I'm SURE I've seen this problem before with reference to 16-bit etc error messages, but in home edition I do not have the MMC users & groups (had to make new user with password renew then that starts in another environment) or the Security tab of the properties of file/folder for permissions NTFS etc (had to use icacls).

  Can someone enlighten us justice on that shiney? : o I don't want to have to redo the entire Setup, I'm sure it is something fixable...

  OK, so for those who want to know the real difficulty? --He came from a guy on the forums of TekTips

  goombawaho (MIS)

  5-13 dec 08:05

  Before charging, tell him from a prompt CMD (Administrator). Go in the the C:/windows/system32 folder and type "Rename verclsid.exe verclsid.old. reset

  I guess that I didn't that I had seen the name "verclsid.exe" in some of these error messages trying to run things.  I looked and saw it was to check the files or something.
  Anyway I couldn't rename even in admin console so I started in a different environment and renamed the copy in system32 and syswow64.
  Now, I've started and bang things seem to be ok! I guess I should try and replace it with a known working version? That or just give back it.
  I doubt that everybody does all c:\windows control total should be too dangerous, right... just?  : P I don't have a way to put permissions by default anyway, so Hey.  Formatting beats!

  Now why everyone here didn't it?  I knew it would be simple!  : p

• I get an error "" device cannot start (10) "" when I try to connect the stereo headset bluetooth Motorola SF600.

  I tried to pair my new Motorola SF600 bluetooth stereo headset so I could listen to and control Windows Media Player with my helmet. When I matched the device with the Microsoft Bluetooth driver has been installed, the service of the helmet was not available and troubleshoot message recommended that I upgrade to the Broadcom Widcomm driver. I followed all the instructions, downloaded the latest Widcomm driver and installed. Then I restarted the computer. I could see the Bluetooth icon in the taskbar, but it was red and not white (or blue). When I clicked it, it just says adapter lights up, I did. As soon as I hit this button, the bluetooth icon disappears and no bluetooth connection is possible. When I look in the bluetooth properties and the properties of the driver, I see the message "device cannot start (10). I searched all over the web a possible solution and the closest thing, I found was a fix article talking about a fix for bluetooth adapters that cannot start. I asked the fix and tried to apply it, but whenever I try to run it, it gives the message that it is not applicable to my computer. I wish you a few recommendations for how to fix this. Please let me know if you need more information about the devices or anything else. Bluetooth dongle is a mini Logitech BT which came bundled with the combo keyboard and mouse MX-5000. He is old enough, but he gave me always excellent service under Windows XP.

  Thank you.

  Dan

  Original title: Win7 won't let dongle BT start with the latest Broadcom Widcomm driver

  Thanks for the advice, but I came to the conclusion that Windows 7 does not support the advanced features of this particular Logitech Bluetooth adapter. Windows XP takes to load them entirely, but for some reason any Windows 7 isn't. From Logitech Web site States expressly that the Bluetooth adapter supplied with my keyboard and mouse will not support anything other than a mouse and a keyboard, which is unfortunate. I don't know why, but there you have it. I'm giving up now.

• Cannot start Windows, Windows Setup does not detect the hard disk, Bootmgr is misiing

  I have a few problems on my laptop [Acer 3810 t]

  -The first problem
  My mobile give me screen "cannot start windows' who have 2 choices: run the Startup Repair tool and boot normally. I chose to fix it, but nothing happens and stuck "starting windows" and gives unmountable boot volume 'blue screen '. the Dungeon of blues screen appear (for laptop is a not restart). So I turned off my phone and turn it back on it. the "could not start" screen again and I chose to start normally. but the result is negative. My portable Dungeon cannot start windows. Because of that I am using the advanced boot option and choose all the boot type such asit cannot load the safemode, last configuration etc, but the result is the same, you cannot start windows. in safe mode, its stuck in loading fileinfo.sys. I do not give up to try again with the advanced boot option. until I have a bad situation. My laptop can only 1 file in safe mode and blues screen do not appear again (my laptop only return at the beginning of start or restart)

  -The second problem
  because it cant solved, I want to reinstall my laptop. My OS is Vista 32 bit (pre-installed). I want to install the new operating system, windows 7. I use Dsik Flash bootable USB to install Windows 7. But in the BIOS, it is detected as a USB HDD. So I set my BIOS to load USB HDD to the first order. the installation can be done, but only until the "start Setup" screen and its deadlock. I have it wait up to an hour, but nothing happens. So I'm going to BIOS, change SATA mode to IDE mode AHCI. Then load the USB and go "installation program start screen. but the new problem is the installation of window does not detect my hard drive. So I can not choose the place to install the operating system. I have to load the driver, but I did not. Again to load the configuration to AHCI and IDE, until I get my HDD can detected in IDE mode. So I think I can move easily, I choose custom installation and choose the hard drive to install the operating system. But unfortunately, at the beginning of the process, after choosing the OS, the Installer gives error if installation location the installation failed. (I forgot the error message)

  -The third problem
  So far, I can't spend 'startup begins' as well in mode IDE and AHCI. Also bootmgr in my hard disk is missing, so I can't go to move the startup repair or the startup option in my HDD as before

  What is the error code that you got with blue screen?

  I think that there is a problem with your drive HARD check that by contacting acer...

• Cannot start Acrobat DC. Could not receive the confirmation e-mail. How can be changed the e-mail address?

  Cannot start Acrobat DC. Could not receive the confirmation e-mail. How can be changed the e-mail address?

  Hello

  The following link will guide you on how to change your email address associated with your Adobe ID

  Change the e-mail address associated with Adobe ID.

  Please follow the steps and let us know how it goes.

  Concerning

  Sukrit diallo

• Cannot convert win2k server - fails with the boot.ini on the version 3 and 4 error!

  Hello

  I am trying to convert an old win 2000 Server on an esx server, and I'm having a little trouble.  I am trying to run the converter and version 3 already tried with no luck.  On version 3, it manages at the end, think 97% I think and fails.  When I look in the logs of the converter, it seems to resemble a mistake with the boot.ini file.  I left the server for some time and today I have just spotted that the new version of the converter is out and although I'd give it a try.

  Unfortunately, I will have a chance to convert the server again.  It is not the last step.  Ive joined the output of the converter v4 logs.

  Here are the contents of the boot.ini file:

  boot loader

  Timeout = 0

  default = multi (0) disk (0) rdisk (0) partition (2) \WINNT

  "multi (0) disk (0) rdisk (0) partition (2) \WINNT="Microsoft Windows 2000 Server "/ fastdetect

  I would appreciate any advice or tips that I've been struggling with this and I have to get the server took off the old hardware that crack, on which it is running.

  Thanks, much appreciated

  "multi (0) disk (0) rdisk (0) partition (1) \WINNT="Microsoft Windows 2000 Server "/ fastdetect

  Error 1450 (hive loading error: insufficient system resources exist to complete the requested service (1450)) temporary loading hive
  .\vstor2-mntapi10-F1D31D11007E00000000000005000000\WINNT\system32\config\SOFTWARE under the name of the mntApi181664643429986496 key.

  Unable to load the registry hive
  .\vstor2-mntapi10-F1D31D11007E00000000000005000000\WINNT\system32\config\SOFTWARE, error 0x5aa.

  23202 error when you open the software hive

  Cannot read the news of the OS on the system disk: 23202

  You must increase the size limit of the registry on the source. For more details, see: Conversion failed with 1450 PlatformError under Windows 2000 or NT (1005979).

  Please award points if that's the right answer.

• He cannot start Oracle Database after server restart.

  construction of an oracle Hyperion Essbase and planning sandbox on my laptop using VMware 9.0

  and 11 GR 2 as database of New York City.

  Once I completed the installation and configuration, I install the client EAS essbase, once completed I have too reboot the server

  Once the server is back, the database gives me the following error:

  Database Instance: Hyperion

  Enterprise Manager is unable to connect to the database instance. The State of the components are listed below. Page updated August 31, 2013 2:19:45 CEST

  Database instance

  Host localhost

  Port 1521

  Hyperion SID

  C:\app\Administrator\product\11.2.0\dbhome_1 Oracle Home

  Earphone

  Down status

  Host localhost

  Port 1521

  Name LISTENER

  C:\app\Administrator\product\11.2.0\dbhome_1 Oracle Home

  Location C:\app\Administrator\product\11.2.0\dbhome_1\network\admin

  TNS-12541 details: Listener TNS:no

  Connection to the Instance of the agent

  State has failed

  ORA-12541 details: TNS:no listener (DBD ERROR: OCIServerAttach)

  Change the details of the State

  Copyright (c) 1982, 2010, Oracle.  All rights reserved.

  SQL > connect to an idle instance.

  SQL > SQL > ORA-00119: invalid specification for the system LOCAL_LISTENER parameter

  ORA-00132: error syntax or network name not resolved "LISTENER_HYPERION."

  Disconnected

  Database Instance: Hyperion

  Error message

  The startup of the database operation failed. Click on "View details" to see the error. You may need to perform a restore.

  See the details

  Perform a recovery

  Enterprise Manager is unable to connect to the database instance. The State of the components are listed below. Page updated August 31, 2013 12:56:37 CEST

  Please notify

  %ORACLE_HOME%=C:\app\Administrator\product\11.2.0\dbhome_1 this looks OK

  but I did a search for TNSlistener. ORA file and it wasn't there?

  I missed an aseo when configuring the database

  Please notify

• VMWare cannot start Windows 7 from Bootcamp Partition

  MacPro with separate internal disk used to run Windows 7 on it without any problem.  At some point, I noticed that the drive that was labeled 'Windows' read, 'Untitled '.  I started VMWare and went to run the virtual machine where Windows and read the splash screen "Starting AMD Am79C970A network" which means that the boot drive has been completely bipassed.  I looked in the bios and the hard drive is selected and initialization of the network would be a relief.

  I guess the thing is that the drive on which Windows is installed has become unbootable plu somehow and I'm not really saavy enough to solve this and I was wondering if someone can offer a suggestion that reinstalling Windows (which would eliminate a very mature plant).

  I tried creating a new virtual machine and adding a new hard drive, pointing both to the library > Application Support > VmWare Fusion > VMS > Bootcamp > dev disk 1 > Boot Camp partiton > Boot Camp partition.vmdk, but this file is not selectable for a reason any.

  Anyone has an idea where to go on this?

  TIA

  sean =

  Hi earthcub,

  Have you tried simply remove and time of the Boot Camp virtual machine? Essentially, it recreates the Boot Camp metadata that may be incorrect at this stage.

  This knowledge base article describes how: stop the Boot Camp to appear in your library of Virtual Machine.

  Let me know if it works.

  Eric

• Layer mask groups converted from work plans to the size of the artboard in older versions of Photoshop

  I wanted to start this post as an idea, but I couldn't choose communities (it wouldn't let me), so here it is posted...

  ----

  Just came across this with a customer...

  I use for a mobile design project work plans, and I just got a screenshot with some texts asking why among work plans were really great. Way bigger than a phone. (I'm under NDA and cannot post the screenshot, but imagine there are a lot of iPhone size work plans and two of them seem to be at a right angle)

  I opened the file and on my end, everything is the right size. Remembering the weeks ago to tell the customer that they need to update their version of Photoshop for all this work correctly, I have take a look at the screenshot and see that they are on CC2014 - none of the work plans.

  What I'm asking here, is that, since we have data, plans of work are objects of a defined size and 'alive', why not just use these data to hide layer groups at the opening of the PSD / PSB (PSB in my case) in older versions of Photoshop?

  It could save you a TON of hassle and confusion.

  Hi Zack,

  High level to your query response is: no, there is no conduct business case for a general solution to what you are suggesting. So I don't see what is happening.

  I say that as someone who likes to give back and forth and backward compatibility.

  There are two parts of the problem that you raise. They are related and somewhat intertwined.

  1. Having the version previous (2014) do something reasonable with the data from the version the most recent (2015). Either the old version should be taught on the most recent data so it can make a decision about what to do, or the newer version must put additional data in the file format for consumption by the older version.
  2. Back and forth between versions. As you say, a much more difficult problem. In fact, we do a good job of that today. But we must be sure that whatever we do for (1) not to damage and back the wrong way.

  Let's be very clear: 2014 will not be touched, except for critical bugs, absolutely. And even before 2015 is released, it would have not been corrected to make it behave better with work plans. There is no way that I could see what is happening. So all we have done for better backward compatibility had to be entirely done within 2015.

  For the round trip, the general problem is something like this: we want to 2014 to read an object that has properties of 2015, he does not understand. While we might learn ch to keep these properties as opaque property, must also have rules for when these properties are not valid and thrown on the floor. Probably, if the object is changed. But not always. And sometimes when another object parent is changed. And so on. Right now, we destroy them unknown content from their reading in the old version. Make us and record what we understand. As a user, you receive an alert telling you that we are do this. It's the safest thing to do.

  There are special cases where a developer can see an opportunity to preserve a level of backward compatibility and back and forth. We try to do if we believe that it is safe. But this scenario happens only occasionally.

  In the case of work plans, made us really think about this: If we added a mask to the group for backward compatibility, it should do something with this mask reading around 2015. And what would happen if the user edited this mask in 2014 and opened upward in 2015 - and who edited mask do not align with the structures of the artboard? Things started to get dark quickly. We started to see traps. The workflow together to sheath special round trip had to be tested and verified. The cost was rising and this expense must be filtered through a cost/value trade-off. And then what happens when we add a new property to the structure of work plan? At these efforts for nothing?

  So we compromised with what you have today. Work plans become groups in 2014. The Group and the layer structure remains intact. Doesn't secretly add us and remove masks for the round trip. You can safely change the groups to your heart's content. When return you this document in 2015, you redo the work plans of the groups. Was not clear and safe way to do more than that given the time that we had.

  Take a step back and think about your problem, it doesn't seem to be a value to a script that converts group work plans + layer masks for your workflow to have your documents that is consumed by the customers of 2014. This would be carried out in 2015 because she would need understand the work plans. And maybe vice versa from 2014 to 2015, assuming that the documents were not published in a hostile way. We're not likely to write such a script as a generic tool, but someone competent with script might be able to do this.

  More that I intend to write, but hopefully, it gives you additional insight in the compromises that we have faced.

• How to convert sql server procedures in the format of oracle

  Hello

  I need help, I got some procedures that is written in the format MS Sql, I need to convert those to the format of the oracle, and I don't know how to do. Could someone help me?

  IN SQL server code format is:

  / * Object: StoredProcedure [dbo]. [sp_rpt_get_job_log_on_demand]    Script Date: 20/12/2013-09:07:26 * /.

  SET ANSI_NULLS

  GO

  SET QUOTED_IDENTIFIER ON

  GO

  CREATE PROCEDURE [dbo]. [sp_rpt_get_job_log_on_demand]

  (

  @JOB_ID INT

  @REPORT_DATE AS DATETIME

  , @PERIOD VARCHAR (100)

  )

  AS

  BEGIN

  SET @REPORT_DATE = CONVERT (DATETIME, CONVERT (DATE, @REPORT_DATE))

  DECLARE @MONTH INT = (YEAR (@REPORT_DATE) * 100) + MONTH (@REPORT_DATE)

  , @TODAY = INT ((((@REPORT_DATE) YEAR * 100) + MONTH (@REPORT_DATE)) * 100) + DAY (@REPORT_DATE)

  @YEAR INT = YEAR (@REPORT_DATE)

  SELECT J.JOB_ID

  J.JOB_NAME

  CASE

  WHEN F.FREQUENCY_SUBTYPE IS NULL, F.FREQUENCY_TYPE

  OF OTHER F.FREQUENCY_TYPE + '-' + F.FREQUENCY_SUBTYPE

  END AS FREQUENCY_TYPE

  L.TRANSACTION_DATE

  L.PROCESS_DATE

  START_TIME

  END_TIME

  DATEDIFF(MINUTE,START_TIME,END_TIME) AS TIME_TAKEN

  L.RECORD_COUNT

  ISNULL(L.EXECUTION_STATUS, 'NOT STARTED') AS EXECUTION_STATUS

  L.ERROR AS ERROR_DESC

  P.PRIORITY_NUMBER

  P.COLOR_CODE

  OF dbo.JOBS J AS

  INNER JOIN dbo. ACE OF FREQUENCY F

  ON J.FREQUENCY_ID = F.FREQUENCY_ID

  INNER JOIN dbo. JOB_PRIORITY AS P

  ON J.PRIORITY_ID = P.PRIORITY_ID

  LEFT JOIN dbo. TBK_POS_FACT_LOADING_SUMMARY ACE L

  ON J.JOB_ID = L.JOB_ID

  AND)

  (@PERIOD = 'TODAY' AND CONVERT (DATETIME, CONVERT (DATE, L.START_TIME)) = @REPORT_DATE) OR

  (@PERIOD = 'MONTHS' AND ((START_TIME) YEAR * 100) + MONTH (START_TIME) = @MONTH) OR

  (@PERIOD = 'YEAR' AND YEAR (START_TIME) = @YEAR)

  )

  AND CONVERT (DATETIME, CONVERT (DATE, L.START_TIME)) < = @REPORT_DATE

  WHERE F.FREQUENCY_TYPE <>'NONE'

  AND J.JOB_ID = @JOB_ID

  UNION ALL

  SELECT J.JOB_ID

  J.JOB_NAME

  CASE

  WHEN F.FREQUENCY_SUBTYPE IS NULL, F.FREQUENCY_TYPE

  OF OTHER F.FREQUENCY_TYPE + '-' + F.FREQUENCY_SUBTYPE

  END AS FREQUENCY_TYPE

  L.TRANSACTION_DATE

  L.PROCESS_DATE

  START_TIME

  END_TIME

  DATEDIFF(MINUTE,START_TIME,END_TIME) AS TIME_TAKEN

  L.RECORD_COUNT

  L.EXECUTION_STATUS

  L.ERROR AS ERROR_DESC

  P.PRIORITY_NUMBER

  P.COLOR_CODE

  OF dbo.JOBS J AS

  INNER JOIN dbo. ACE OF FREQUENCY F

  ON J.FREQUENCY_ID = F.FREQUENCY_ID

  INNER JOIN dbo. JOB_PRIORITY AS P

  ON J.PRIORITY_ID = P.PRIORITY_ID

  INNER JOIN dbo. TBK_POS_FACT_LOADING_SUMMARY ACE L

  ON J.JOB_ID = L.JOB_ID

  WHERE F.FREQUENCY_TYPE = 'NONE '.

  AND)

  (@PERIOD = 'TODAY' AND CONVERT (DATETIME, CONVERT (DATE, L.START_TIME)) = @REPORT_DATE) OR

  (@PERIOD = 'MONTHS' AND ((START_TIME) YEAR * 100) + MONTH (START_TIME) = @MONTH) OR

  (@PERIOD = 'YEAR' AND YEAR (START_TIME) = @YEAR)

  )

  AND J.JOB_ID = @JOB_ID

  AND CONVERT (DATETIME, CONVERT (DATE, L.START_TIME)) < = @REPORT_DATE

  END

  GO

  I tried to convert it to a format of oracle... But I get the error message.

  --------------------------------------------------------------------------------------------------

  CREATE OR REPLACE PROCEDURE POS.sp_rpt_get_job_log_on_demand_V)

  JOB_ID NUMBER,

  DATE OF REPORT_DATE,

  PERIOD VARCHAR2 (100))

  AS

  BEGIN

  l_MONTH: = TO_CHAR (REPORT_DATE, "YYYYMM");

  TODAY: = TRUNC (REPORT_DATE);

  l_YEAR: = TO_CHAR (REPORT_DATE, 'YYYY');

  SELECT J.JOB_ID,

  J.JOB_NAME,

  CASE

  WHEN F.FREQUENCY_SUBTYPE IS NULL, F.FREQUENCY_TYPE

  OF OTHER F.FREQUENCY_TYPE | '-' || F.FREQUENCY_SUBTYPE

  END

  AS FREQUENCY_TYPE.

  L.TRANSACTION_DATE,

  L.PROCESS_DATE,

  START_TIME,

  END_TIME,

  (END_TIME - START_TIME) AS TIME_TAKEN,

  L.RECORD_COUNT,

  NVL (L.EXECUTION_STATUS, "NOT STARTED") AS EXECUTION_STATUS,

  L.ERROR AS ERROR_DESC,

  P.PRIORITY_NUMBER,

  P.COLOR_CODE

  OF POS.JOBS J.

  POINT OF SALE. FREQUENCY F,

  POINT OF SALE. JOB_PRIORITY P,.

  POINT OF SALE. TBK_POS_FACT_LOADING_SUMMARY L

  WHERE J.FREQUENCY_ID = F.FREQUENCY_ID

  AND J.PRIORITY_ID = P.PRIORITY_ID

  AND J.JOB_ID = L.JOB_ID

  (PERIOD = 'TODAY'

  AND TO_CHAR (L.START_TIME, 'YYYYMMDD') =

  TO_CHAR (REPORT_DATE, 'YYYYMMDD'))

  OR (PERIOD = 'MONTHS' AND TO_CHAR (START_TIME, "YYYYMM") = MONTH)

  OR (PERIOD = 'YEAR' AND TO_CHAR (START_TIME, 'YYYY') = YEAR)

  AND F.FREQUENCY_TYPE <>'NONE'

  AND TRUNC (L.START_TIME) < = TRUNC (REPORT_DATE)

  AND JOB_ID = J.JOB_ID

  UNION ALL

  SELECT J.JOB_ID,

  J.JOB_NAME,

  CASE

  WHEN F.FREQUENCY_SUBTYPE IS NULL, F.FREQUENCY_TYPE

  OF OTHER F.FREQUENCY_TYPE | '-' || F.FREQUENCY_SUBTYPE

  END

  AS FREQUENCY_TYPE.

  L.TRANSACTION_DATE,

  L.PROCESS_DATE,

  START_TIME,

  END_TIME,

  (END_TIME - START_TIME) AS TIME_TAKEN,

  L.RECORD_COUNT,

  L.EXECUTION_STATUS,

  L.ERROR AS ERROR_DESC,

  P.PRIORITY_NUMBER,

  P.COLOR_CODE

  OF POS.JOBS J.

  POINT OF SALE. FREQUENCY F,

  POINT OF SALE. JOB_PRIORITY P,.

  POINT OF SALE. TBK_POS_FACT_LOADING_SUMMARY L

  WHERE F.FREQUENCY_TYPE = 'NONE '.

  AND J.FREQUENCY_ID = F.FREQUENCY_ID

  AND J.PRIORITY_ID = P.PRIORITY_ID

  AND J.JOB_ID = L.JOB_ID

  (PERIOD = 'TODAY'

  AND TO_CHAR (L.START_TIME, 'YYYYMMDD') =

  TO_CHAR (REPORT_DATE, 'YYYYMMDD'))

  OR (PERIOD = 'MONTHS' AND TO_CHAR (START_TIME, "YYYYMM") = MONTH)

  OR (PERIOD = 'YEAR' AND TO_CHAR (START_TIME, 'YYYY') = YEAR)

  AND JOB_ID = J.JOB_ID

  AND TRUNC (L.START_TIME) < = TRUNC (REPORT_DATE)

  END;

  /

  POS PROCEDURAL errors. SP_RPT_GET_JOB_LOG_ON_DEMAND_V:

  LINE/COL ERROR

  -------- -----------------------------------------------------------------

  4/28 PLS-00103: encountered the symbol "(" quand attend un de la) "

  Next:

  := . ), @ % of default characters

  The symbol ': = ' has been replaced by "("pour continuer.) "

  76/1 PLS-00103: encountered the symbol "END" when awaits an of the

  Next:

  . (* % & -+; / TA for rem rest mod < an exhibitor > (*))

  and or group having intersect less order start union where

  connect | multiset

  The symbol ';' was replaced by 'END' continue.

  Thank you and best regards,

  John of Vikash

  Keep in mind, DBMS_OUTPUT is reserved for debugging purposes. If you want the output to a front-end, you can use SYS_REFCURSOR as OUTPUT parameter and get the data of the SELECT query.

• Cannot start OSs of HDD external USB on the Satellite NB10t-A-101

  I'm unable to install Linux on the Satellite NB10t-A-101, because it does not allow to boot from USB or install other OSs.I tried to circumvent this way: (it came with pre-installed Windows 8).

  (1) turning off SecureBoot (which I did)
  (2) putting USB at the top of the list of starting the computer.

  But it does not work.

  I have two HDD USB (a TPG, the other normal) partitioned and it s impossible for them starting with this model of Satellite. I m thinking to return it back to the store that I need to install/start several OSs.

  Hello

  Great that you are using Linux on your PC!

  You mention that you have disabled the secure boot.
  It is very good. But you don't say anything about the startup mode and nothing about what Linux you try to start.

  Most of the distros must support UEFI but that can't be true for each of them.
  If you want Win8 dualboot with a Linux distro, so you need to active UEFI and able to start in this mode distribution.
  If you use a late clone-Ubuntu, Fedora or OpenSuse, you should be fine!

  Another clue could be to take the USB key and try to start another PC from him.
  Which will give a clearer picture of where the problem lies: on your key or the compatibility of firmware NB10 & distro Linux of your choice.

  If you try to boot from a USB - HDD, I'm afraid I'm a bit at a loss as I've never tested.

  I hope this helps!

  Tom BR

• Cannot start Coldfusion 9 Application Server Service

  Note that this is a Dev server.  Not vital, but super boring.  I found that my machine has been restarted due to Lumension.  It's normal.  However, given that I imported a file .because the old CF8 server directly to this Dev CF9 Server I had not restarted or restared the CF9 service.

  I found these error messages in the event viewer:

  The ColdFusion 9 application server service could not be started.  Check the log files from the server 'coldfusion' for more information.

  and

  The ColdFusion 9 application server service stopped with the error special service that the system cannot find the specified file...

  I checked the JRUN logs and can not find all the papers relating to correspondence timestamp of today or anything out of place, which seems to be the cause.  Nothing in the CF be newspapers, mainly because CF never rose from the status running if no newspaper could be generated.

  I thought I found the culprit in this post http://www.houseoffusion.com/groups/cf-talk/thread.cfm/ThreadId:61223 ... but the fix is without effect.  I can't find anything in my search using grep outside the JRUN temp folder a single .xml file with a path of Coldfusion8 not valid.  The path of attachment or remove the offending temporary files does not solve the problem.

  I also tried to move all files from the root that was moved in the directory / / ColdFusion9/wwwwroot/out and you try to start the service, but the same error and failure occurs.

  I have not tried to reinstall.  I installed the CF9.0.1 update and it work just dandy wait this restart.  There are no other experienced computer problems that I can tell, and no other errors were found in the event viewer.

  Thank you!  I now have an error that I can hunt and diagnose if all goes well.

  "Error: no known VMs."  (Check for corrupted jvm.cfg file) "has been exposed error.

  With a little big of the Goog I'm done with a solution of another CF user experience the same joy: http://forums.adobe.com/thread/795168

  Found the problem because I suspected an incorrect path.  It's the java.home variable that was incorrect.  Java.Home =: / ColdFusion9/execution/jre, I changed to java.home=C:/ColdFusion9/runtime/jre and he has pulled up very well.  Solved!

• Cannot start a catalog from a backup file

  Hello

  Back up files from my iMac to an external hard drive, including all the photos and the Lightroom Catalog by using time machine.

  And now I'm on my way with my MCBook Air, it seems I can't launch the catalog (Lightroom Catalog.Ircat) from the backup file on the disk hard ext, he says that "the catalog cannot be used because the parent folder"xxx"does not allow files to be created in the breast of this".

  Wouldn't be because the original catalogue was in my iMac hard drive not in this backup ext hard drive? Does it really matter?

  However, I can open the Preview.Irdata file catalog Lightroom in Lightroom and import them into the current Lightroom Catalog, that I created in my Macbook Air. When I export the file, the file size appears smaller than usual.

  So my questions are:

  1 is there a way I can start the Catalog.Ircat with Lightroom file on the backup ext hard drive?

  2. If the answer is 'no' to the above question, will I create a new lightroom catalog in this backup (for my iMac) ext hard drive, and then import all the pictures once more?

  3. I found there is an option to "Import an another catalog" in Lightroom, it will work for my situation? He did not try as I worry I'll make a mess, and I guess if I can't start this catalogue in the disk hard ext, I am not able to import as well.

  3. the Preivew.Irdata file does not allow me to have the larger size of file to export is that correct?

  4. Finally, what is the suggestion to resolve all these long-term problem? Will I pass all (both from my iMac and Macbook Air) photos on a disk hard ext, and then export the current catalog to my Macbook Air on the same disk hard ext and import photos from my iMac in this catalogue (that is, a single catalog LR)?

  Thank you for sharing your experience and your suggestion so that I can better manage the LR catalog and smoothly in the future.

  See you soon,.

  Chuen

  Hi Chuen,

  It seems that the external hard drive does not write the changes on it and that's why the error that says "the catalog cannot be used because the parent folder"xxx"does not allow files to be created in the breast of this."

  The error is not related to your original catalog being located on the hard drive in the Imac.

  I suggest that you copy this file .lrcat and .lrdata from your local external hard drive to a location on your hard drive and try to launch it from there.

  If this does not work, then you can go for the option to create a new catalog and 'Import from another catalogue'

  Let us know if this is useful or if you need additional assistance.

  Kind regards

  Claes

• Cannot start vmware converter

  I am at my wits end and I thought that I'll never ask publicly a question as simple as that: I installed Virtual Center 2.5 and want to run vmware converter. services are running, but how do I start the GUI?

  This should be the easiest thing in the world, but there are no shortcuts, no start, no exe files work menu entry (they are all CLI tools), and my VI client doesn't give me any options to import...

  It seems to be properly installed in C:\Program Files\VMware\Infrastructure\Converter Enterprise, services run etc. I just want to see the graphical interface, so I can import a physical machine.

  It seems that you have installed the Converter server. Have you downloaded the plugin converter to the VI Client? "If this isn't the case, please go to the Plugins menu-> manage Plugins... and download the plugin converter in the tab" available "within"plugin Manager"?

  If the converter server is installed and registered successfully with your VirtualCenter server, you should be able to see a link to download the plug-in in the tab"available" converter plugin Manager '. "

  Only after the installation of the converter plug-in, you should be able to see the VI Client options for importing a physical machine. You may have to restart the VI Client after downloading the converter VI client plug-in.

• Cannot start Portege M200 from SD card

  Hello

  I recently bought a used Portege M200 and I'm unable to install an operating system.

  The situation: I got the laptop with a trial version basis of win XP Home Edition I couldn't use. It would not boot from external dvd player usb I bought, so I installed a linux system hd with the laptop from a friend, then install via this machine (this method does not work with windows however).

  After reading many articles from those who have encountered the same problem, I decided to go and trying to boot from an sd card, which offers various possibilities to install windows.
  I tried a lot of things, but still could not boot from sd.
  I use an SD card of 2 GB Panasonic class 4.

  -Toshiba sd-utilities (AFAIK) only work on toshiba windows machines, so that they are of no use to me
  -People say that place an image of a boot on the SD disk, naming $tosfd000.vfd or $tosfd00.vfd (tried both) would make the case, but no.
  -When switching to FDD-> HARD drive boot order->... or using the third option in the toshiba start screen green led beside the card reader will Flash once, but then directly boot linux from the HARD drive.

  Specifications: Toshiba Portege M200, 2 GHz, bios is ACPI v.3.01 (which is a little confusing because the version the most recent that I found for the portege is 1.8)
  If someone messed up the bios in installig a version that is not compatible with my laptop?

  any help much appreciated!

  Hello

  really strange case, but one of the first suggestions would be to try another SD card because it is possible that the card is not recognized correctly.
  A good idea would be to try some transcend cards... but just try another card and give a feedback if it worked.
  It would be really interesting if it works...

  See you soon