Cannot start vWS app, but can connect to broker on android/iPhone

Similar Questions

• Error: "Windows cannot start the windows firewall/internet connection sharing (ICS) service.

  On my Eee PC under XP Home edition tablet, I get the error "Windows cannot start the windows firewall/internet connection sharing (ICS) service" when I try to access my firewall. I also can't connect to my router Wireless Lan to go on the internet. This may be due to some viruses that have been deleted using Microsoft Security Essentials.But the problem persists. Could recharge SP2 solve this problem or am I condemned to reload the operating system?

  Hi jdmanel,

  NOTE: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following link. http://support.Microsoft.com/kb/322756

  Follow the steps in the article.

  You cannot start the Windows Firewall service in Windows XP SP2

  Troubleshooting settings of Windows Firewall in Windows XP Service Pack 2 for advanced users

  For reference:

  How to manually open ports in Internet Connection Firewall in Windows XP

• I am not able to connect to the main wifi network but can connect to the network of comments.

  Hello

  This is something new, I am facing to where I am not able to connect to a main network of airport extreme, but can connect to the network of comments. Guest network works perfectly fine while the main network does not connect to devices in the home. I also found that none of my base stations are visible in the airport utility (I Airpot extreme and Airport Express on the same network). Help, please.

  The first step in troubleshooting with this type of problem is to perform a complete network power cycle on your network. If you decide to do...

  Power off all the devices on your network... modem, routers, computers, printers, etc... in any order you want.

  Wait a minute

  Turn on the modem first and leave a few minutes, he managed by itself

  Turn on the next device that is connected to a modem and leaves turn a good minute

  Keep turn on devices one by one at a time, one minute apart, until the entire network is back

  Recheck the network and report on your results

• Why can't connect using Apple Airport WIFI of my remote security cameras but can connect using the Xfinity WIFI Modem/Router open?

  Why can't connect using Apple Airport WIFI of my remote security cameras but can connect using the Xfinity WIFI Modem/Router open?

  Two possibilities:

  (1) your airport WiFi might have a network name that is not in line with best practices, wireless

  A good wireless network name is...

  ... In short no more than 20 characters

  Simple... no special characters like an apostrophe, dollar sign, asterisk, etc.

  Compact, without spaces in the name

  For example, a wireless network network name as... red .dfedoryk Apple wireless network... .is not what you want. Something like... .dfedorykwireless. .. masse are much more likely to connect to non-Apple devices.

  Same guidelines your password

  (2) Apple gives the same name to network 2.4 GHz and 5 GHz network that produces double router band.  Some non-Apple devices are confused by the present, you may need to use the option to assign a different name for the network of 5 GHz on the router from Apple. Then, 'point' your device to the network name specific to which you want to connect.

• Unable to connect to creative cloud but can connect to the adobe site... Please help

  Unable to connect to creative cloud but can connect to the adobe site... Please help

  already done. without success. now chat with adobe helpdesk. Thank you

• Cannot connect to the App Store, but can connect to iTunes

  Hello

  I just bought my 2011 macbook pro model and tent put up however when I log in my details for identification for apple Apple store the Dungeon of the wheel rotates forever beside the details of the account and the next screen is not coming. I skipped the whole upward and opened the Mac operating system and tried to open a session on apple store directly, but always the same wheel turns in an interesting way, I can connect to iTunes. What is the problem with my macbook?

  Thank you

  Firat

  Note: I checked the internet connection and the software updates, and there is no problem with them.

  I'm having a similar problem. The App Store icon shows that there is an update but when I open App Store I get the spinning wheel but nothing else. Any category I click (features, Top Charts, updates, etc.) I get the same. Help of the App Store is the same. I have not had problems before. This is on a Mac Mini (mid 2011) 10.11.3 running. App Store says Version 2.1 (459). Everything else seems to work very well. Anyone have any ideas?

• I cannot connect to a site web serviceAgent on my laptop but can connect to others with you help

  I have a web site but cannot connect in the House on my knees up but can log away from home on aid an elses computer please

  Hello

  Welcome to the Microsoft community.

  I see that you are having problems logging in to a Web site.

  Quick questions:

  1. What site you're talking about?
  2. What browser version are you working?
  3. What happens when you try to connect to the site? You get the error message?

  In the meantime, if you are using Internet Explorer 8 or 9 please visit these links:

  Cannot access some websites in Internet Explorer 8 and 9

  http://support.Microsoft.com/kb/967897

  Why can't I view some websites?

  http://Windows.Microsoft.com/en-in/Windows7/why-cant-I-view-some-websites

  Please come back with the details required for assistance.

• Cannot ping the default gateway with Centrino Advanced-N 6235 on XPS 12 but CAN connect to the Internet

  I have a XPS 12 with an Intel Centrino Advanced-N 6235 wireless card.  I can't ping the default gateway with the wireless card.  When I use a USB network adapter, I can ping the default gateway for the wired connection.  I can connect to the Internet and the internal network with the wireless card and can ping other computers on the network.  I am trying to run a program to connect wireless to a projector.  I have two different programs for the two different projectors.  I can connect by cable but not wireless.  I think that the problem is anything that does not make me a ping of the default gateway or something on the wireless card.  I have a 10 latitude with a Broadcom wireless card that is connected to the same access point and can ping the default gateway and can connect wirelessly to two projectors.  They all have two windows 8 Pro.

  I downloaded the new drivers from Dell, uninstalled, reinstalled, tried to update Windows install the drivers, all with no success. Any ideas?

  The solution of the problem by chance.  I was connected to the computer with a different network than what has been used to authenticate user account on the wireless.  When I switched the user account for the user account that was logged on to the computer was the same who authenticate to the wireless, it worked.  Go figure!

• Unable to connect to creative cloud but can connect to the adobe Web site

  I can connect to the Web site, but the creative cloud says that my password is incorrect every time
  I tried to change my password and it will not always open a session

  Windows or Mac?

  
  

  Tried to reset password of the Adobe Creative Cloud app?

  1)
  

  

  2)

  

  
  

• E430 - no internet - but can connect to the network. Any idea?

  Hi, I had a really frustrating problem.

  I can connect to wireless and wired networks, but in both cases, after about 5 minutes, I can't surf the internet (on any browser) for about 10 minutes and none of my programs who need internet access. I had the same problem at home, school and work.

  I tried windows 7 convenience store and all he says is that "the diagnostics policy service does not work" and "explore additional options.

  I tried to reinstall the netwrok card, no luck.

  Can anyone think of anything whatsoever?

  Thanks in advance!

  I have windows 7 64-bit of the E430

  Try to reinstall ThinkVantage Access Connections and let me know if that helps (use this link, under ThinkVantage Technology):

  http://support.Lenovo.com/en_US/research/hints-or-tips/detail.page?&docid=HT073272

  I would also like to launch ThinkVantage System Update from the same page.

• Cannot send, Outlook Express, but can receive

  I can't send, but can receive e-mails with any problem.  My ISP & I spent an hour working with COMCAST on 3 POP and SMTP scenarios and they said that I had was AOK. They said I had to contact Ms.
  Has anyone had and solved this problem?

  I get the followiing message "an unknown error has occurred. Protocol: SMTP, Port 0, dry SSL 0x00c12E
  Thanks, Ron
  E-mail address is removed from the privacy *.

  Comcast 'Tech' suggest to use Port 0? It'll never work like that.
   
  Change the SMTP port to 587 and ensure that: my server requires authentication is enabled.
   
  How can I set up/configure Outlook Express, Windows Mail & Windows Live Mail to E-mail from Comcast?
  http://www.Comcast.com/customers/FAQ/FaqDetails.ashx?ID=2288
   
  http://customer.Comcast.com/pages/FAQViewer.aspx?GUID=5be34cb1-B190-4FC1-BEAA-818778a54aed

• Cannot start my app music after 10.0.0

  I think that my music app broke down, cause when I try to start it, it displays a blank page and goes back to the home page.

  Hello joyokafor,

  If you are unable to open the music app on your iPhone, the first thing that I would recommend would be to force close the app (by double-clicking the Home button and drag upward on the application of music), and then restart your iPhone.

  Force a nearby application on your iPhone, iPad or iPod touch
  https://support.Apple.com/en-us/HT201330

  Restart your iPhone, iPad or iPod touch
  https://support.Apple.com/en-us/HT201559

  If the music app still does not open, make sure first that you have a backup of your iPhone in place.
  The backup of your iPhone, iPad and iPod touch
  https://support.Apple.com/en-us/HT203977

  We will then reinstall iOS (which should not affect your data or settings on the device) by following the steps below.

  1. Connect your device to a computer and open iTunes. If you don't have a computer, you can borrow one, or go to an Apple Store or service provider authorized Apple for help.
  2. When your device is connected, force it to restart.
     • On an iPhone 7 or iPhone 7 more: press and hold the sleep/wake buttons and the Volume at the same time.
     • On an iPhone 6s and earlier, the iPad or the iPod touch: press and hold buttons sleep/wake and Home at the same time.
  3. Don't release when you see the Apple logo. Keep until you see the screen in recovery mode now.
     
  4. When you have the ability to restore or update, choose update. iTunes will try to reinstall iOS without erasing your data.
     

  iTunes will download the software for your device. If it takes more than 15 minutes, your device will exit Recovery mode and you need to repeat steps 2 and 3.

  If your iPhone, iPad or iPod touch does not illuminate https://support.Apple.com/en-us/HT201412

  If you are still having trouble getting the application music to launch after following these steps, let know us and we can go from there!

  All my best!

• HP Envy m6 is unable to connect/detect wifi but can connect to ethernet

  My HP Envy laptop m6 cannot connect to our wifi connection and connects only using the ethernet cable connection.

  He was always very well when I downloaded windows 8.1 but displays limited connectivity suddenly / no.. I tried everything that I can including reset tcp ip settings via the command prompt, find other drivers until someone suggested me to put my laptop back to windows 8. Still does not solve the problem. Now, my computer laptop is wifi access or detect any wireless so our wifi at home, or other.

  Please do help me. I really need to solve this problem. I am a student and I need bad wifi connection since it is the only available connection in our school. I am not knowledgeable on this subject, and it would be really great if someone could help me.

  Thank you very much!

  Hello

  Please try "Ralink 802.11 b/g/n WiFi Adapter:

  http://ftp.HP.com/pub/SoftPaq/sp57501-58000/sp57538.exe

  Kind regards.

• MacBook can't connect to iMac, iMAC, but can connect to Macbook

  I have a problem, I can not get my course around and I need help.  I have an iMAC (2009) and Macbook Pro (2010).  Recently, I upgraded the two systems to El Capitan (both systems run the updates).  Before the upgrade, via file sharing, I was able to connect and read/write to all shared folders and devices connected to my iMAC to my macbook after some tedious tweaking configurations - the largest in realizing that I had to disable SMB and AFP only.  I use the iMAC as a home port and have all my external hard drives attached to the iMAC, and before the upgrade, I could see all the readers (and their scores) as well as all files, I had set up the iMAC to share.  Vice versa for the iMAC for Macbook - I could read/write in all the shared folders on the iMAC Macbook.

  After the upgrade to El Capitan, right at the start, the MacBook has emerged as a player immediately shared in the finder and connected without problem.  I can currently read/write of the iMAC on the hard drive of the macbook.

  The problem is, the Macbook will connect is more of the devices connected to the iMAC or iMAC.  I've fiddled with settings as much as I can think of, such as disable sharing of files, it reactivated, remove shared folders and add them, check all the settings for all readers shared on the iMAC, etc.  Everything seems to be configured exactly how it was before the upgrade, but for the life of me I can't have the Macbook to connect to iMAC.  In the finder, I see the iMac in the list of shared devices, but it just says: the connection has failed, and when I click on the button "connect as", it returns the following error: "there is a problem connecting to the server"IMAC of Pottsy".  Check the server name or IP address, and then try again.  If you continue to have problems, contact your system administrator.  Whenever I click on the button "connect as" it just trying to connect, never offered me a way to enter a user name or password, so I don't know which credentials that it uses at this stage, although I guess they are the same as before the upgrade when everything worked.  I have not changed the passwords for one of the user accounts and the user name and master password on both machines are the same, if that matters.

  Does anyone have suggestions as to what might be causing this unit or a possible way to fix?  Recently, I received this iMAC to a friend and was completely in love with the configuration of shared devices and the way everything worked before the upgrade and find this problem.  It allowed me to share a hard drive that is partitioned as a time Machine to the two machines without having to unplug anything, among other things.

  In addition, AirDrop does not currently work in both directions which is really weird.  I am able to navigate to the MacBooks HD of the iMAC via devices shared and drag and drop the files, but said dropping "transferred failed" if I try that.

  I'd appreciate really no guidance that someone might be able to provide.

  Screenshot of sharing iMAC below settings:

  

  MacBook Pro sharing settings screenshot

  

  Thank YOU and GOOD VACATION.

  Well, I solved my problem after HOURS of madness, it's obviously something so incredibly simple that I could cry.  The MacBook was somehow not connected to iCloud - signature in iCloud enabled the MacBook to connect to the front just like iMAC.  I can't believe it wasn't an error message asking me to sign in iCloud.  I wonder to re-sign in iCloud always for reasons beyond me, and of course, once you done would have saved me countless hours of attempts without meaning, don't ' you must connect in iCloud message appeared.  SMH.

  So there you go people, if you are experiencing something similar, make sure that both systems are signed in iCloud.

  PEACE!

• Cannot start DPS App Builder

  Hi

  After a long time only working with DPS2015, I do some chores with DPS2014 SE.

  That's why I tried to start the DPS APP Builder. But I can't launch:

  * In Indesign with folio chosen, I can click on 'Create' App. then I see a gauge "App Builder is underway" but subsequently no app Builder.

  * Apple Spotlight or in Applications I find DPS App Builder. But clicking on it does not start the application.

  * I already downloaded the latest Version (32.4.5) from the Adobe website and installed.

  * I already removed the app and installed the new.

  * I rebooted my macbook.

  * I uninstalled App Buiolder DPS by moving it to the trash

  * I emptied the trash, too (and emptied the download folder, too)

  * I deleted the browser cache

  * I re-uploaded the DPS App Builder Image and installed again - no problems

  But I can't throw :-(

  Any other ideas?

  Thanks

  Hans

  PS: I also can not start previewer folio (tool that I did not really, because I test better with the Adobe Viewer on my iPad. But maybe the two things have the same reason.

  Yes, these are the two most recent versions. I do not know why you can no longer launch DPS App Builder. Have you entered in the Applications folder and tried by double clicking on the app? If so, I would like to delete it in the Applications folder, reinstall it, and then try again. If this does not work, contact technical support.