Cannot start windows 10 disc external hard usb

Similar Questions

• My drive external hard usb does not appear after login

  Hi could someone help because I bought a disc external hard usb and when I plug it in it does not appear on my laptop at all and ive tried troubleshooting and also right-click on computer in going on the management and also clicking on disk management, but it doesn't appears not on there also could someone help please thank you

  Hello Gabriel,

  Thanks for posting your question on the forum of the Microsoft community.

  I would like to know some information about the problem so that we can help you better.

  1. What is the brand and model of your laptop?
  2 have you tried to connect the player to another computer?

  I appreciate your efforts to resolve the issue.

  This problem can occur for the following reasons:

  -The USB driver is maybe damaged.
  -Corrupted registry keys can be the cause of problems with the connection to your external hard drive.

  I would suggest trying the following methods and check if it helps.

  Method 1:
  Run this Microsoft fixit and check.
  Reference:
  Hardware devices do not work or are not detected in Windows
  http://support.Microsoft.com/mats/hardware_device_problems

  If this does not help, then use method 2.

  Method 2:
  Please use the suggestions contained in this Microsoft Knowledge base article and check the issue.
  Reference:
  My drive does not appear in Windows Explorer
  http://support.Microsoft.com/kb/330140

  Note: Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  http://Windows.Microsoft.com/en-us/Windows/back-up-registry

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Drive external hard USB - cela used to work now I get an error message = "this device cannot start. (Code 10) "Any suggestions?

  Drive external hard USB - cela used to work now I get an error message = "this device cannot start. (Code 10) "Any suggestions?

  Hello

  I suggest to refer to this link and follow the steps in this link and check if that helps:

  http://support.Microsoft.com/kb/943104

  It will be useful.

• Cannot start Windows, Windows Setup does not detect the hard disk, Bootmgr is misiing

  I have a few problems on my laptop [Acer 3810 t]

  -The first problem
  My mobile give me screen "cannot start windows' who have 2 choices: run the Startup Repair tool and boot normally. I chose to fix it, but nothing happens and stuck "starting windows" and gives unmountable boot volume 'blue screen '. the Dungeon of blues screen appear (for laptop is a not restart). So I turned off my phone and turn it back on it. the "could not start" screen again and I chose to start normally. but the result is negative. My portable Dungeon cannot start windows. Because of that I am using the advanced boot option and choose all the boot type such asit cannot load the safemode, last configuration etc, but the result is the same, you cannot start windows. in safe mode, its stuck in loading fileinfo.sys. I do not give up to try again with the advanced boot option. until I have a bad situation. My laptop can only 1 file in safe mode and blues screen do not appear again (my laptop only return at the beginning of start or restart)

  -The second problem
  because it cant solved, I want to reinstall my laptop. My OS is Vista 32 bit (pre-installed). I want to install the new operating system, windows 7. I use Dsik Flash bootable USB to install Windows 7. But in the BIOS, it is detected as a USB HDD. So I set my BIOS to load USB HDD to the first order. the installation can be done, but only until the "start Setup" screen and its deadlock. I have it wait up to an hour, but nothing happens. So I'm going to BIOS, change SATA mode to IDE mode AHCI. Then load the USB and go "installation program start screen. but the new problem is the installation of window does not detect my hard drive. So I can not choose the place to install the operating system. I have to load the driver, but I did not. Again to load the configuration to AHCI and IDE, until I get my HDD can detected in IDE mode. So I think I can move easily, I choose custom installation and choose the hard drive to install the operating system. But unfortunately, at the beginning of the process, after choosing the OS, the Installer gives error if installation location the installation failed. (I forgot the error message)

  -The third problem
  So far, I can't spend 'startup begins' as well in mode IDE and AHCI. Also bootmgr in my hard disk is missing, so I can't go to move the startup repair or the startup option in my HDD as before

  What is the error code that you got with blue screen?

  I think that there is a problem with your drive HARD check that by contacting acer...

• Satellite L300-19F starts not-cannot start Windows

  My mobile no dΘmarre, "cannot start Windows. "To solve the problem: restart with the recovery CD.

  I can do that, but first of all, I don't want to try to save the data (and photos) from a hard disk.
  Is it possible, for example, go to BACK when booting with the recovery CD, and copy the data on USB?

  Furthermore, all my data on E:\ partition. Will be crushed it during the installation of recovery?

  Please notify. Kind regards.

  > Is it possible, for example, go to BACK when booting with the recovery CD, and copy the data on USB?
  No, it is not possible!
  If you should start up using recovery disc then the recovery process would be started and the whole HARD disk may be formatted!

  You can try to start by using a WinPE
  http://www.LiveCD.com/

  This allows you to start the device and access the data on the HARD drive

  You could also build own Windows live CD
  Check this box:
  http://www.MakeUseOf.com/tag/how-to-create-your-own-custom-Windows-Live-CD/

• Cannot start Windows and "Begin repair of launch" or "Start Windows normally" did not work.

  Original title: need help URGENT

  The normal Windows Vista (Home Premium 32 Bit) updated on my DELL INSPIRON laptop... Cannot start Windows

  'Launch Startup Repair' or 'Start Windows normally' did not work.

  What to do next without deleting my data? Thank you.

  Hello

  1st thing to try is a restoration of the system in safe mode

  http://www.windowsvistauserguide.com/system_restore.htm

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If that does not read this information

  the link below is how to download and get a vista disk startup repair, which you can start from the

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  Here's how to use startup repair system restore command prompt, etc. to bleepingcomputers link below

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  to boot from the dvd drive to be able to you will see a way to get into the bios Setup at the bottom of the screen or command menu start

  It would be F2 or delete etc to enter the BIOS or F12 etc. for the start menu

  Change boot order it do dvd drive 1st in the boot order

  http://helpdeskgeek.com/how-to/change-boot-order-XP-Vista/

  Data recovery, if required

  1. remove the hard drive and it slave in another computer

  2 buy or borrow a USB disk drive hard put in yout case then plug it into another computer and read the hard drive like this

  3. try Knoppix

  http://www.Knopper.NET/Knoppix/index-en.html

  BUT this method depends on your hardware in the computer that failed

• Satellite A660-158 - cannot start Windows

  Toshiba Satellite A660-158

  I bought a laptop Toshiba Satellite A660-158. It has served me less than a week. I think it's the broken hard drive.

  My problem:
  Once I start the computer, it started and has worked for a while, but suddenly, there was an error reading that I didn't have the time. Computer has been restarted. And does not load... Until the boot mode does not reach. But the initial test (with logo) succeeded. Takes a long time and finally gives an error:
  -----
  Cannot start Windows. Maybe it was because of the recent small difference is the hardware or software configuration. To fix this error:
  1. Insert your Windows installation disc, restart the computer (the complete transmission wasn't)
  2. choose the language settings, and then click Next.
  3. Select "repair your computer".
  If this disk is missing, contact your system administrator or computer manufacturer (he turned and said to wear to the DEPOT, but I do not have this feature).

  Status: 0xc000000e

  Details: Unable to start menu, since the required device is inaccessible.
  -----
  Please help me! Idon't know what make me)
  Please write to E-Mail: [email protected]

  Post edited by: HunterS7777777

  Hey,.

  And why do you think the hard drive is faulty?
  Have you ever tried the repair your computer option? Usually with this option you can restore factory in a few minutes.

  Also if you have the Toshiba recovery disc you can also restore the factory of this disc. Just boot from it and follow the instructions on the screen. You need to do a few clicks only, installation with all the drivers and tools happen automatically.

  If you have any other questions, please let us know! :)

• Run windows 8 from external hard drive

  I need to search 8 windows, but not the wand to put in place the dual boot om my laptop.

  What I can install windos8 on an external hard drive and are there specific requirements to do

  Thank youi

  I need to search 8 windows, but not the wand to put in place the dual boot om my laptop.

  What I can install windos8 on an external hard drive and are there specific requirements to do

  Thank youi

  Only Windows 8 Enterprise Edition supports installation on external hard drives, and it is only available for volume license customers. Windwos 8 Pro cannot be installed on an external hard drive.

• Satellite L40 - cannot start Windows

  Hello

  hope you can help, my computer Toshibal L40 laptop on commissioning began by displaying the following error message:

  * "Cannot start Windows. a recent change in the software hardware might be causing... » *

  It offers the possibility of:
  "* Launch Startup Repair option" * "

  I chose this. WIndows seems to load up, but then I get the following error message:

  Installed program cannot start. Click OK to turn off the computer *.

  I lost the recovery disk, but attempted to load the recovery console by using a windows XP disk, but it gave me error message more. Advice would be very welcome.

  For the installation of Vista you don't need SATA driver but for Windows XP Home edition you need. Is no problem at all.

  The question is what you want to do now? If you want to use Vista just use recovery media and you will have factory again.
  No problem at all.

• Cannot transfer files to an external hard drive to a second and the error is "error copying file or folder. "Impossible to copy ' file/folder name.

  Original title: cannot transfer files to one external hard drive to another

  An error message is displayed: "error copying file or folder." Impossible to copy "file/folder name. "The destination folder is the same as the source folder.

  Peter Tiedemann

  Hi Peter,

  Thanks for posting your question in the Microsoft Community.

  From your problem description, I understand that you are unable to transfer files from an external drive on another drive. Please let me know if this isn't the problem that you are experiencing.

  Before troubleshooting, I have little information on the issue.

  1. Do you receive any error or display message?
  2. Did you recent hardware or modifications to the software on the computer before this problem?

  Try the methods and then check after each method:

  Method 1: Transfer files from a drive to the location on the desktop or a temporary folder and then try to transfer them to the destination disk.

  Note: make sure the free space on the disk in the destination drive.

  Method 2: Run the Fixit:

  http://support.Microsoft.com/mats/windows_file_and_folder_diag/

  Method 3: Disconnect your player safely, and restart the computer. And then try to transfer the files.

  If the problem persists, post your reply with results and questions above. We are happy to help you further in the advanced troubleshooting steps!

  It will be useful.

• Acer aspier L5100 cannot start windows

  Hi, my Acer Aspire L5100 SNID [under the direction of privacy] now cannot start windows.

  Blue screen, status of the Boot Manager Oxc000000f

  required unit is not available.

  I don't have the drive to victory, what to do now?

  Advice from someone...

  probably corrupted file BCD.

  What is your operating system?

• Cannot start windows after update

  After you install a windows update, my computer cannot start windows, when I boot it.  It seems the windows files.  I don't have a recovery disk (lesson).  I have windows vista, is there anyway to restore windows on my PC other than buying the software.  I confess that I do not download updates often... that is why... It's always trouble.

  Hi, MooreTM,

  Brand and model of your computer, please.  Thank you.

  (1) you are able to start safe mode and do a system restore?

  Start the computer

  Start typing F8

  Select Mode safe mode with networking

  What a load Safe Mode, start > all programs > Accessories > system tools > SafeMode

  Select a date and time before the Windows update that caused the problem

  (2) start Windows and tapping F11 key

  If the Advanced Options screen, select fix my computer

  Press enter

  I suggest the site of the manufacturer of the computer and purchase a reinstallation DVD software.  Cost is minimal ($16.-$20.)

• Get error 0x800106ba and cannot start Windows Defender

  Cannot start windows defender after installing Miicrosoft Security Essentials

  MSE disables Windows Defender from Vista:

  Microsoft Security Essentials has its own integrated version of the defender and it automatically disables the version of Vista in Windows Defender.

  If it's not:

  http://Windows.Microsoft.com/en-us/Windows-Vista/turn-Windows-Defender-on-or-off

  Turn Windows Defender on or off the information on the link above of Microsoft.

  Hope the foregoing explains the compatibility issues with Windows Defender and MSE.

  See you soon.

  Mick Murphy - Microsoft partner

• Cannot start Windows virtual pc host (I have all the updates)

  -Cannot start windows virtual pc host - cannot start windows virtual pc host process and earlier version of microsoft virtual pc is installed on this computer.

  I have all the updates for Virtual xp downloaded from the microsoft page.  Virtualization tool runs on my system.

  What is the best?  Should I bother trying to get virtual xp installed?  Or can I just use VM ware or something similar to run a virtual system?

  Any suggestions?

  Thank you.

  SYSTEM SPECS: icor7 3.2 Ghz, 24GBz Ram, Nvidia Geforce GTX 480, Windows 7 Pro 64 bit.

  process host and earlier version of microsoft virtual pc is installed on this computer.

  You happen to have Virtual PC 2007 is installed? If so, you need to uninstall that. Click Start, type: programs and features

  Press enter on your keyboard

  See the list of program and make sure that Virtual PC 2007 is uninstalled.

  If your intention is to use Windows XP Mode, make sure that the following two files are installed:

  You must install both files:
  1 Windows6. 1 - KB958559 - x 64 or x 86 architecture that you run
  Restart the system, and then install:
  2 WindowsXPMode_en-we

  Both Windows XP Mode and Windows Virtual PC can be downloaded from http://www.windows.com/business/downloads.
  For more information about system requirements, please visit http://www.microsoft.com/virtual-pc

  Mobile: http://www.notebooks.com/2009/11/23/using-windows-virtual-pc-with-windows-xp-mode/

  Releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP

• Cannot start Windows Virtual PC host process. Check the log of the events system for more details

  Hello

  I am running Win 7 Home Premium 64 and seek to install Windows XP Mode Virtual PC.

  I followed the instructions at: http://www.microsoft.com/windows/virtual-pc/download.aspx and receive the following:

  "Windows Virtual PC. Cannot start Windows Virtual PC host process. Check the log of the events system for more details".

  He does not point me to the "system event log", but he leaves me here. Any advice?

  Thank you

  Hello

  Ideally, this error message indicates that your processor does not support the against hepatitis a (hardware support for virtualization)function.

  Cause:

  Windows Virtual PC and Windows XP Mode are supported only on computers whose CPUs are the HAV feature is enabled. Therefore, if your processor does not support the functionality of HAV or if this feature is disabled, you cannot start the virtual machines in Windows Virtual PC.

  To resolve this problem, follow the steps mentioned in the link below

  Error message about Virtualization-aided material for Windows XP Mode in Windows Virtual PC on a computer that is running Windows 7

  http://support.Microsoft.com/kb/977206