Cannot start Windows 10 (Partition exists in the startup disk)

Similar Questions

• Cannot start windows after trying to resize the partition.

  I tried to use utility disk to increase the size of my windows partition, of course, broke TI boot camp should have read this on the community before the trial.

  I use all the solitaire t controls, including the following

  Fdisk e/dev/disk0

  p

  setpid 4

  07

  Pavilion 4

  p

  To write

  There

  That did not help, I don't see windows when I hold down the option key. The windows partition exist again, however, which is good. Also, I turn off csrutil, I use the latest version of Mac OS X

  diskutil list

  / dev/disk0 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * GB 251,0 disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Apple_HFS Macintosh HD 165,1 GB disk0s2

  3: disk0s3 Apple_Boot Recovery 650.0 MB HD

  4: Microsoft database BOOTCAMP 85.0 GB disk0s4

  Cs diskutil list

  No logical volume group CoreStorage found

  sudo TPG - vv - r see the/dev/disk0

  Password:

  See the TPG: / dev/disk0: mediasize = 251000193024; SectorSize = 512; blocks = 490234752

  See the TPG: / dev/disk0: MBR suspicious to sector 0

  See the TPG: / dev/disk0: Pri GPT to sector 1

  See the TPG: / dev/disk0: GPT Sec at sector 490234751

  start index size summary

  0 1 MBR

  1 1 Pri GPT header

  2 32 table GPT Pri

  34 6

  40 409600 1 part TPG - C12A7328-F81F-11D2-BA4B-00A0C93EC93B

  409640 322541752 2 part TPG - 48465300-0000-11AA-AA11-00306543ECAC

  322951392 1269536 3 part TPG - 426F6F74-0000-11AA-AA11-00306543ECAC

  324220928 166012928 4 part TPG - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7

  490233856 863

  490234719 32 table dry GPT

  490234751 1 dry GPT header

  Udo fdisk/dev/disk0

  Disk: geometry / dev/disk0: 30515/255/63 [490234752 sectors]

  Signature: 0xAA55

  From end

  #: cyl hd s - cyl hd s id [Start - size]

  ------------------------------------------------------------------------

  1: EA 0 0 2 - 25 127 14 [1-409639] < unknown ID >

  2: AF 25 127 15 - 1023 254 63 [409640-322541752] HFS +.

  3: AB 1023 254 63 - 1023 254 63 Boot Darwin [322951392-1269536]

  * 04:07 1023 254 63-1023 254 63 [324220928-166012928] HPFS/QNX / TO THE

  Help, please.

  Please after the release of

  sudo dd if = / dev/rdisk0s4 account = 1 2 >/dev/null | hexdump - C

  Since there is no extra partition now, did you remove using disk utility?

• Cannot start Windows install error "3 that the system cannot find the path specified".

  Original title: problem with Windows install

  the installer of Windows won't work, made sure that it's automatic in services, but when I click start it says error 3, the system cannot find the path specified

  Hello

  1. Did you changes to the computer before the problem occurred?

  Method 1: I suggest you unregister and re - register the windows setup program and check if that helps you. To do this, please follow the steps below:

  Unregister and register the Windows Setup program again

  (a) click Start, click run and then type cmd in the dialog box, and then click command prompt.

  (b) at the command prompt, type the following and press ENTER after each line:

  MSIExec /Unregister

  MSIExec/regserver

  Method 2:
  Also I suggest you to update your installation Package of Windows with the latest version of Windows Installer available in the link below.

  Windows Installer 4.5 Redistributable:
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=5A58B56F-60B6-4412-95B9-54D056D6F9F4&displaylang=en

  Hope this information is useful.

• Cannot start Windows after trying to install the Vista SP2

  I just tried to install Vista SP2 and now whenever I try to turn on the cpu it gives me a blue screen and restarts. It does allow me to start in SafeMode either. In addition, it seems to be impossible to find my restore points. I was able to stop the screen using the F8 menu and it gives me this error on the blue screen

  STOP: 0X0000007E (0XC0000005, 0X81C223BB, 0X803998F4, 0X803995F0)

  For some reason, when I go to the cmd prompt to advanced troubleshooting guide, I can do, he says that I am the X and not the C drive, if that has something to do with my restore points does not.

  I tried to get the menu of the restoration on C manually through C:\windows\system32\restore\, but nothing was there.

  Any help would be appreciated. I will not lose rather all my data in a reformat.

  Thank you
  Matt

  What application or antivirus security suite is installed and your current subscription?  What anti-spyware (other than Defender) applications?  What third-party firewall (if applicable)?  Who were these applications that run in the background when you installed SP2?

  A (another) Norton or McAfee application has already been installed on this machine (for example, a free trial version which is preinstalled when you bought it)?

  
  0X0000007E: SYSTEM_THREAD_EXCEPTION_NOT_HANDLED
  A system thread threw an exception who did not catch the error handler. There are several individual causes for this problem, including the hardware incompatibility, service driver or defective peripheral system or software problems. Check (EventVwr.msc) event viewer for more information.
  
  Source: http://aumha.org/a/stop.php#0x7e

  
  SYSTEM_THREAD_EXCEPTION_NOT_HANDLED bug control is a very common bug control. To interpret it, you must identify which exception has been generated.

  Common exception codes are:
  
  0xc0000005: STATUS_ACCESS_VIOLATION indicates a memory access violation has occurred. [emphasis]
  
  Source & more: http://msdn.microsoft.com/en-gb/library/ms795746.aspx

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support, initially planned to end on November 26, 2009, has been extended until February 26, 2010. Availability of support chat or messaging differs depending on your location. Some questions may require that more support for which he is advanced a charge.  Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; ( Problems after installing a service pack).

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Boot Camp error - the startup disk cannot be partitioned or restored to a single partition.

  I use an iMac (retina 5K, 27 inches, end of 2014), the Version of OSX EL Capitan 10.11.1.

  I tried to install windows via bootcamp, but failed. And then, when I'm trying to use Boot Camp Assistant to remove the existing Windows Partition.

  Below will error was triggered.

  The startup disk cannot be partitioned or restored to a single partition.

  The startup disk must be formatted in a single volume in Mac OS extended (journaled) or already partitioned by Boot Camp Assistant to install Windows.

  I want to just delete the Windows Partition and reinstall, can someone help me please

  Here are my details to disc...

  List of $ diskutil

  / dev/disk0 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * GB 121,3 disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Apple_CoreStorage Macintosh HD 121.0 GB disk0s2

  3: disk0s3 Apple_Boot Boot OS X 134,2 MB

  / dev/disk1 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * 1.0 TB disk1

  1: EFI EFI 209.7 MB disk1s1

  2: Apple_CoreStorage Macintosh HD 895.8 GB disk1s2

  3: disk1s3 Apple_Boot Recovery 650,1 MB HD

  4: NO NAME 104.9 MB disk1s4 EFI

  5: NO NAME 104.9 MB disk1s5 EFI

  6: EFI No. 104.9 MB disk1s6 NAME

  7: EFI No. 104.9 MB disk1s7 NAME

  8: disk1s8 NO NAME 104.9 MB EFI

  / dev/disk2 (internal, virtual):

  #: NAME SIZE TYPE IDENTIFIER

  0: Apple_HFS Macintosh HD + 1.0 TB disk2

  Logical volume on disk1s2, disk0s2

  6F4F36AE-BEB3-43EA-8390-C5E7F46574B6

  Fusion unencrypted drive

  List of cs $ diskutil

  CoreStorage groups of logical volumes (1 found)

  |

  + Logical Volume - Group 7C72C890-404F-4CE8-AA74-3AAD4B71D773

  =========================================================

  Name: Macintosh HD

  Status: online

  Dimensions: 1016788279296 B (1.0 TB)

  Free space: 114688 B (114.7 KB)

  |

  +-< physical="" volume="">

  |   ----------------------------------------------------

  |   Index: 0

  |   Disc: disk1s2

  |   Status: online

  |   Dimensions: 895799427072 B (895,8 GB)

  |

  +-< physical="" volume="">

  |   ----------------------------------------------------

  |   Index: 1

  |   Disc: disk0s2

  |   Status: online

  |   Dimensions: 120988852224 B (121.0 GB)

  |

  +-> EB5AF0A2-99C5-41DB-B58F-D98B3589AC65 family of Logical Volume

  ----------------------------------------------------------

  Encryption type: no

  |

  +--> Logical Volume 6F4F36AE-BEB3-43EA-8390-C5E7F46574B6

  ---------------------------------------------------

  Disc: disk2

  Status: online

  Size (Total): 1010932908032 B (1.0 TB)

  Reversible: no

  Name: Macintosh HD

  Volume name: Macintosh HD

  Content indicator: Apple_HFS

  LVG Type: Fusion, sparse

  $ sudo fdisk/dev/disk0

  Disk: geometry / dev/disk0: 14751/255/63 [236978176 sectors]

  Signature: 0xAA55

  From end

  #: cyl hd s - cyl hd s id [Start - size]

  ------------------------------------------------------------------------

  1: EA 1023 254 63 - 1023 254 63 [1-236978175]

  02:00 0 0 0-0 0 0 [0-0] unused

  03:00 0 0 0-0 0 0 [0-0] unused

  04:00 0 0 0-0 0 0 [0-0] unused

  Delete disk1s4-disk1s8 using disk utility, run

  Reset the management system (SCM) controller on your Mac - Apple Support

  How to reset the NVRAM on your Mac - Apple Support

  and try again Deputy BC.

• Satellite L40 - cannot start Windows

  Hello

  hope you can help, my computer Toshibal L40 laptop on commissioning began by displaying the following error message:

  * "Cannot start Windows. a recent change in the software hardware might be causing... » *

  It offers the possibility of:
  "* Launch Startup Repair option" * "

  I chose this. WIndows seems to load up, but then I get the following error message:

  Installed program cannot start. Click OK to turn off the computer *.

  I lost the recovery disk, but attempted to load the recovery console by using a windows XP disk, but it gave me error message more. Advice would be very welcome.

  For the installation of Vista you don't need SATA driver but for Windows XP Home edition you need. Is no problem at all.

  The question is what you want to do now? If you want to use Vista just use recovery media and you will have factory again.
  No problem at all.

• Bootcamp error: "the startup disk cannot be partitioned or restored to a single partition" and Windows recovery partitions

  I have Setup with Bootcamp Windows 8 and then upgrade to Windows 8.1, and then upgrade to Windows 10.

  When I want to restart the training camp that I got the error message: "the startup disk cannot be partitioned or restored to a single partition.

  According to this page, it is because of Windows recovery partitions added during the 8 to 8.1 migration and 8.1 to 10.

  I check with diskutil and I found 2 partitions of Windows Recovery:

  diskutil list

  / dev/disk0 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * GB 500,3 disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Apple_CoreStorage Macintosh HD 419,4 GB disk0s2

  3: disk0s3 Apple_Boot Recovery 650.0 MB HD

  4: Microsoft database BOOTCAMP 79.1 GB disk0s4

  5: Windows Recovery 471.9 MB disk0s5

  6: Windows Recovery 472,9 MB disk0s6

  / dev/disk1 (internal, virtual):

  #: NAME SIZE TYPE IDENTIFIER

  0: Apple_HFS Macintosh HD GB + 419,0 disk1

  Logical volume on disk0s2

  C961E459-1E0D-4060-A467-3B4A705264AA

  Unencrypted

  I tried to delete the Windows Recovery 2 partitions with disk utility tools but the button "-" to remove them were leaving is disabled.

  Is it a good idea to remove these partitions? If yes how?

  1. What is the year/model of your Mac?

  2. you are trying to install a new copy of the W10 or remove the existing installation?

  3. do you have the W8 or installation/upgrade W8.1 had problems before the upgrade of the W10?

• Resized partition Boot Camp, now cannot start Windows

  I have a MacBook Pro (with the retina) with a 128 GB SSD which was, until recently, evenly divided 50-50 between Mac and Windows 8.

  However, I need more space on the size of Windows, so I reduced the size of the Mac partition to 40 GB and then, because for some reason I couldn't expand the Boot Camp one, I had to create another partition that I could use to put my stuff in side Windows.

  I did this via Windows.

  I now, weeks later, started in Mac for the first time since, and now I can't get back into Windows. The partition is not present on the desktop, or in the boot disk utility.

  Output of gdisk:

  GPT fdisk (gdisk) version 1.0.1

  WARNING: Open with shared lock devices will not have their

  table partition automatically reloaded!

  Scanning partition table:

  MBR: protection

  BSD: absent

  APM: absent

  TPG: present

  Found valid GPT with protective MBR; using GPT.

  Disk/dev/disk0: 236978176 sectors, GiB 113.0

  Logical sector size: 512 bytes

  Identifier (GUID) of disc: 453C975D-0233-49EB-A8C3-7B7BF7805CFD

  Partition table contains up to 128 entries

  First usable sector is 34, last usable area is 236978142

  The partitions will be aligned with the boundaries of sector 8

  Space free total is 4165 sectors (2.0 MiB)

  Starting number (sector) end (sector), Code name of size

  409639 40 1 200.0 of MiB EF00 EFI system partition

  2 409640 79247487 37.6 giB AF05 customer

  3 79247488 80517023 619.9 MiB AB00 Recovery HD

  4 80517120 119578623 18.6 giB 0700 basic data partition

  5 119580672 236976127 56.0 giB AF00 BOOTCAMP

  Can anyone help please? The partition is obviously still there, but I can't work on how to make it reappear in the startup disk!

  Can you use [help] can not boot Windows after resizing partition (8.1) as reference and rebuild your MBR?

• Cannot start Windows, Windows Setup does not detect the hard disk, Bootmgr is misiing

  I have a few problems on my laptop [Acer 3810 t]

  -The first problem
  My mobile give me screen "cannot start windows' who have 2 choices: run the Startup Repair tool and boot normally. I chose to fix it, but nothing happens and stuck "starting windows" and gives unmountable boot volume 'blue screen '. the Dungeon of blues screen appear (for laptop is a not restart). So I turned off my phone and turn it back on it. the "could not start" screen again and I chose to start normally. but the result is negative. My portable Dungeon cannot start windows. Because of that I am using the advanced boot option and choose all the boot type such asit cannot load the safemode, last configuration etc, but the result is the same, you cannot start windows. in safe mode, its stuck in loading fileinfo.sys. I do not give up to try again with the advanced boot option. until I have a bad situation. My laptop can only 1 file in safe mode and blues screen do not appear again (my laptop only return at the beginning of start or restart)

  -The second problem
  because it cant solved, I want to reinstall my laptop. My OS is Vista 32 bit (pre-installed). I want to install the new operating system, windows 7. I use Dsik Flash bootable USB to install Windows 7. But in the BIOS, it is detected as a USB HDD. So I set my BIOS to load USB HDD to the first order. the installation can be done, but only until the "start Setup" screen and its deadlock. I have it wait up to an hour, but nothing happens. So I'm going to BIOS, change SATA mode to IDE mode AHCI. Then load the USB and go "installation program start screen. but the new problem is the installation of window does not detect my hard drive. So I can not choose the place to install the operating system. I have to load the driver, but I did not. Again to load the configuration to AHCI and IDE, until I get my HDD can detected in IDE mode. So I think I can move easily, I choose custom installation and choose the hard drive to install the operating system. But unfortunately, at the beginning of the process, after choosing the OS, the Installer gives error if installation location the installation failed. (I forgot the error message)

  -The third problem
  So far, I can't spend 'startup begins' as well in mode IDE and AHCI. Also bootmgr in my hard disk is missing, so I can't go to move the startup repair or the startup option in my HDD as before

  What is the error code that you got with blue screen?

  I think that there is a problem with your drive HARD check that by contacting acer...

• Cannot start Windows virtual pc host (I have all the updates)

  -Cannot start windows virtual pc host - cannot start windows virtual pc host process and earlier version of microsoft virtual pc is installed on this computer.

  I have all the updates for Virtual xp downloaded from the microsoft page.  Virtualization tool runs on my system.

  What is the best?  Should I bother trying to get virtual xp installed?  Or can I just use VM ware or something similar to run a virtual system?

  Any suggestions?

  Thank you.

  SYSTEM SPECS: icor7 3.2 Ghz, 24GBz Ram, Nvidia Geforce GTX 480, Windows 7 Pro 64 bit.

  process host and earlier version of microsoft virtual pc is installed on this computer.

  You happen to have Virtual PC 2007 is installed? If so, you need to uninstall that. Click Start, type: programs and features

  Press enter on your keyboard

  See the list of program and make sure that Virtual PC 2007 is uninstalled.

  If your intention is to use Windows XP Mode, make sure that the following two files are installed:

  You must install both files:
  1 Windows6. 1 - KB958559 - x 64 or x 86 architecture that you run
  Restart the system, and then install:
  2 WindowsXPMode_en-we

  Both Windows XP Mode and Windows Virtual PC can be downloaded from http://www.windows.com/business/downloads.
  For more information about system requirements, please visit http://www.microsoft.com/virtual-pc

  Mobile: http://www.notebooks.com/2009/11/23/using-windows-virtual-pc-with-windows-xp-mode/

  Releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP

• Cannot start Windows Virtual PC host process. Check the log of the events system for more details

  Hello

  I am running Win 7 Home Premium 64 and seek to install Windows XP Mode Virtual PC.

  I followed the instructions at: http://www.microsoft.com/windows/virtual-pc/download.aspx and receive the following:

  "Windows Virtual PC. Cannot start Windows Virtual PC host process. Check the log of the events system for more details".

  He does not point me to the "system event log", but he leaves me here. Any advice?

  Thank you

  Hello

  Ideally, this error message indicates that your processor does not support the against hepatitis a (hardware support for virtualization)function.

  Cause:

  Windows Virtual PC and Windows XP Mode are supported only on computers whose CPUs are the HAV feature is enabled. Therefore, if your processor does not support the functionality of HAV or if this feature is disabled, you cannot start the virtual machines in Windows Virtual PC.

  To resolve this problem, follow the steps mentioned in the link below

  Error message about Virtualization-aided material for Windows XP Mode in Windows Virtual PC on a computer that is running Windows 7

  http://support.Microsoft.com/kb/977206

• I tried Windows 10 and after 10 days of hell, I asked them to uninstall.  But went with is my old Acrobat Reader.  I tried to use it, but it says that my browser plug is missing and that it cannot start because MSVCP120 is missing on the computer too.

  I tried Windows 10 and after 10 days of hell, I asked them to uninstall.  But went with is my old Acrobat Reader.  I tried to use it, but it says that my browser plug is missing and that it cannot start because MSVCP120 is missing on the computer too.  A friend told me that I have to uninstall and then re-install again.  I am a 71 years who does not know what to do.  Help

  Hi jimm13886845,

  Of course I'll help you get this problem is resolved.

  Run this cleanup tool to uninstall any old version of Adobe Reader Download Adobe Reader and Acrobat tool - Adobe Labs.

  Restart your computer and then installer you old version of Adobe Reader using this link Adobe - Adobe Acrobat Reader DC Distribution.

  Let me know if you encounter a problem, we will be happy to help you.

  Kind regards

  Nicos

• Satellite L300-19F starts not-cannot start Windows

  My mobile no dΘmarre, "cannot start Windows. "To solve the problem: restart with the recovery CD.

  I can do that, but first of all, I don't want to try to save the data (and photos) from a hard disk.
  Is it possible, for example, go to BACK when booting with the recovery CD, and copy the data on USB?

  Furthermore, all my data on E:\ partition. Will be crushed it during the installation of recovery?

  Please notify. Kind regards.

  > Is it possible, for example, go to BACK when booting with the recovery CD, and copy the data on USB?
  No, it is not possible!
  If you should start up using recovery disc then the recovery process would be started and the whole HARD disk may be formatted!

  You can try to start by using a WinPE
  http://www.LiveCD.com/

  This allows you to start the device and access the data on the HARD drive

  You could also build own Windows live CD
  Check this box:
  http://www.MakeUseOf.com/tag/how-to-create-your-own-custom-Windows-Live-CD/

• Uninstall the bootcamp partition: the startup disk cannot be partitioned or restored to a single partition.

  A few months ago, I created a Windows 8 bootcamp partition, and then, I updated for Windows 10 without any problem. But I no longer need and I would attribute this space to OS X. The problem is when I try to remove it from the app of Bootcamp, I get this message: "the startup disk cannot be partitioned or restored to a single partition. The startup disk must be formatted in a single volume in Mac OS extended (journaled) or already partitioned by Boot Camp Assistant to install Windows. »

  It comes to the current state of the hard drive:

  

  You have an idea? Thanks for the help.

  I finally solved it. It seems that I had a not mounted partition which it has not been used. I removed it and it solved all the problems:

• Satellite A660-158 - cannot start Windows

  Toshiba Satellite A660-158

  I bought a laptop Toshiba Satellite A660-158. It has served me less than a week. I think it's the broken hard drive.

  My problem:
  Once I start the computer, it started and has worked for a while, but suddenly, there was an error reading that I didn't have the time. Computer has been restarted. And does not load... Until the boot mode does not reach. But the initial test (with logo) succeeded. Takes a long time and finally gives an error:
  -----
  Cannot start Windows. Maybe it was because of the recent small difference is the hardware or software configuration. To fix this error:
  1. Insert your Windows installation disc, restart the computer (the complete transmission wasn't)
  2. choose the language settings, and then click Next.
  3. Select "repair your computer".
  If this disk is missing, contact your system administrator or computer manufacturer (he turned and said to wear to the DEPOT, but I do not have this feature).

  Status: 0xc000000e

  Details: Unable to start menu, since the required device is inaccessible.
  -----
  Please help me! Idon't know what make me)
  Please write to E-Mail: [email protected]

  Post edited by: HunterS7777777

  Hey,.

  And why do you think the hard drive is faulty?
  Have you ever tried the repair your computer option? Usually with this option you can restore factory in a few minutes.

  Also if you have the Toshiba recovery disc you can also restore the factory of this disc. Just boot from it and follow the instructions on the screen. You need to do a few clicks only, installation with all the drivers and tools happen automatically.

  If you have any other questions, please let us know! :)