Cannot start Windows 7 after the update of the system
I don't speak of Windows 7 RTM, I know is RC forum but I downloaded the RC of microsoft's official website and I can't install it, it reached the "end of installation"(ou quelque chose comme ça) phase and blue screen of death appears, saying "memory dump" and other things. ". That's why I downloaded RTM from a torrent site, I installed it, everything was fine, the aero was not on so I that I should update the video drivers and then I downloaded all the updates possible (via the control panel), then I restarted the pc and now I am not able to load windows , it's blue screen of death! Notice that I can run windows 7 mode safe mode, but when I try to start it in normal mode the blue screen appears. BTW, I have windows xp installed on my pc as well. So, here is my setup:
AMD 7750 dual-core 2, 7GHz
4 GB of RAM, 800 Mhz, but the system says 3.25 alone can be used
ATI 4730 512 MB, btw I have integrated graphics card (ati hd3200, I think), don't know if it's important but...
Here is the information about the error:
Signature of the problem:
Problem event name: BlueScreen
The system version: 6.1.7600.2.0.0.256.1
Locale ID: 1026
More information about the problem:
BCCode: 116
BCP1: 871F13D8
BCP2: 90C204B4
BCP3: 00000000
BCP4: 00000002
OS version: 6_1_7600
Service Pack: 0_0
Product: 256_1
Files helping to describe the problem:
F:\Windows\Minidump\080809-15375-01.dmp
F:\Users\blah\AppData\Local\Temp\WER-22953-0.SysData.XML
Read our privacy statement online:
http://go.Microsoft.com/fwlink/?LinkId=104288&clcid=0x0409
If the online privacy statement is not available, please read our offline privacy statement:
F:\Windows\system32\en-US\erofflps.txt
Here's the crash dump:
Debug version of Microsoft Windows (R) 6.11.0001.404 X 86
Copyright (c) Microsoft Corporation. All rights reserved.
Loading dump file [F:\Windows\Minidump\080809-14921-01.dmp]
The mini kernel dump file: only registers and the trace of the stack are available
Symbol search path is: * invalid *.
Pirated Windows 7 allows malware, botnet zero-day ZDNet.com.url Mark L. Ferguson MS - MVP Tags: Windows Cannot start Windows 7 after the conversion of the physical machine Hello I converted my windows 7 64 bit running physical machine to the virtual machine using converter 5.0. I am running VMWare Workstation 8.0. My physical machine hid the 100 MB boot partition and 90 GB main partition. During the conversion, I don't have an option to select a hidden partition, nor did I want in my virtual machine. Conversion failed with the following message (planned): Unable to find the system volume, reconfiguration is not possible. Then, I started the virtual machine using the Windows DVD and selected the option "repair". Once I arrived, I used diskpart to make my active primary partition and then followed the steps in this KB http://kb.vmware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 1037507 to fix everything including BCD. Once this was done, I used converted to reconfigure the virtual computer, and this time he succeeded. Everything was good and as expected up to that point. Now, when I start the VM, I get by BIOS init and then I get a black screen - no messages at all and he vm it is here without doing anything. I tried to fix it again and everything seems good (checked all the information using diskpart, bootrec and bcdedit so that automated repair) - everything seems to be in order, but the black screen is all I see when I try to start. Any help to guide me to this point is very popular figure. Thank you Andrey Disk2vhd create a vhd file my notes:http://sanbarrow.com/p2v2008r2.html Cannot start windows more after Microsoft Update I have XP. Once Microsoft installed a auto update July 16, I could no longer open Windows normally. What did do? That's happened? How can I return to my computer if can't open? It seems that the computer doesn't send any signal to the video monitor so I can't enter all orders. Finally, I learned that I can open in Mode safe mode but not in normal mode... But I need a normal mode to access everything. Of "automatic update" are what kind you referring? As you have acknowledged, XP should not be getting updates. I also asked if you have an installation disc, and you did not. Windows calendar after the system restore notes no longer exist. The Windows calendar after the system restore notes disappeared forever, or can be found somewhere? Cannot start Windows Vista after you download updates Original title: the last time I got a windows vista download it did.not end now if I turn off my computer it won, t wiyhout restart using a rescue disk also can, t open all files except when I connect Last time I had a windows down load it didn, t finished and my computer locked up had to use a rescue disk to start Hiartco1993, 1. do you know what download you tried? 2. do you receive error messages or error codes? 3 have you tried booting in safe mode? You can first try to start in safe mode and try a system restore and check if it helps. Step 1: You can try to start in safe mode. Check out the link for more information on starting your computer in SafeMode below: Start your computer in safe mode http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode Step 2: You can try restoring the system to safe mode. Note: When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed. You can consult the links for: System restore http://Windows.Microsoft.com/en-us/Windows-Vista/What-is-System-Restore System Restore: frequently asked questions http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions Hope this information is useful. Jeremy K If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly. Error: "unable to start Windows XP" after recent updates Original title: Windows XP blocked Hello, I have 2 computers with Windows XP with SP2 and automatic updates. After the updates (17 June), two computers refuse to start. I get the message "Unable to start Windows XP" with different options to choose from, Mode without failure, last Configuration and boot Windows, but none of them works, he keeps just show this message even after trying in vain to restart. What can I do? Desperate enough now. Thank you. Disable the automatic restart in the event of system failure of the Windows startup option to know the error originally this problem. Disable the automatic restart in the event of system failure This option prevents Windows from automatically restarting if an error of Windows to fail. See this link to start in safe mode startup option: Compaq Presario SR5130NX: Cannot start Windows Vista after failure - HELP! Hello! My building has undergone a complete failure so 4 days ago I used it. Power resumed 3 hours later, but I was not able to log on since. Hello Since you already have KNOPPIX I try Gparted and use it to 'clean up' the score because it will stop in an impure State.
NTFS
GParted will try. Also, I would consider the old problem with fat systems, floppy disks etc. which sometimes a copy of sys files from a floppy disk to a hard drive has reactivated a bootable system. So, if system files have been damaged, then replace them since a Setup disk. Because he goes to options, what kind of work. https://en.Wikipedia.org/wiki/Windows_Vista_startup_process Windows Boot Manager (Bootmgr.exe) Windows operating system loader (Winload.exe) Recovery of Windows loader (Winresume.exe) Update Windows XP after the system recovery I had to do a recovery of the system due to the victory of missing files. What I have to do the updates one at a time and is there a way to determine where to start? Norton will not install unless I've got sp2 which was one of the missing files. There is no firewall protection in the restored files, so I won't be on the net longer than necessary. If by 'system recovery' you mean that XP SP1 or SP1a is installed clean now: And, only the system and yourself a favor not install Norton. If you choose to install it I can guarantee you that you will come back and post on a update problem, a system restore question, a winsock problem, etc.. I installed win 8 January last on a xp pro machine, which was in surplus. I uninstalled the victory 8 and now impossible to reinstall win xp pro Hello Unplug the machine to see if this allows the machine to reinstall the operating system of any material not needed (such as printers, fax, speakers, USB devices (except keyboard and mouse), Internet connections, etc.). Cannot start Windows 7 after installing windows XP Original title: unable to load an earlier version of windows. I have been using windows 7 on my computer. Now, I installed windows XP but the problem is that windows 7 has been hiding and windows XP will load automatically. I mean that my PC does not give me the option to choose the two windows to use. I have not formatted the windows partition 7. There are, but hide. Please help me. Hello Read the following article that may help you resolve this problem. This article is true for Windows 7 and Windows Vista. Windows Vista no longer starts after you install an earlier version of the Windows operating system in a dual-boot configuration http://support.Microsoft.com/kb/933179 For more information: Dual Boot between Windows XP and Windows 7 Cannot install Windows XP after the purchase of disk I put the disk for Windows xp, but cannot be installed You should really start a new thread on this question of yours. I'll send a message to the moderator to separate this question from this old thread and create a new one for you. In any case, if you have installed vista, xp will not be able to install automatically. It's because you try to downgrade your computer. However, if the computer already had xp on the computer, and then you could upgrade to vista automatically. You'd have to do is to format the hard disk in the first place, until xp can be reinstalled. But there may be another problem for you at this time. You see, if you have a computer that has been designed to use vista then xp is maybe not able to work on this computer. You will have to go place of origin of the computer and see if your machine has hardware drivers that can be used by xp. In others, you should check if there are drivers xp for your computer model. If this is not the case, then it means that your computer cannot start xp, even if you reformat the hard drive and install a new copy of xp on it. What is the brand and model of your computer? G560 cannot start Windows 7 after onekey recovery I got the Lenovo G 560 0679 (2.54 Ghz, 4 GB Ram, DVD, Win 7 64 bit) * do not know the full product code * and created recovery disks. During the process, the system wanted 3 disks. After the second disc, the recovery disks have already been created. It was a little suspect. I tried the recovery disks. Then I have to restart the system. If I start it says that windows could not be started due to a change in hardware or software. I will go into an installation disc that has not been included in the box. Well below I got the offer to choose between Start windows normally use the last working configuration saving mode Save the network mode Save the mode prompt I also tried to install a Win 7 Home 64 bit edition on the main partition. Subsequently, I installed onekey recovery and tried to restore with the partition of lenovo. It did not work either. Can someone help me? Thanks for you advice. did you already changes on the software? any other error instead of "change in hardware or software? Start Windows lost after the partitioning of the disk next to Mac! Hi, I've lost my windows boot after creating a small new partition in disk utility. Could someone help me pls? Can you post the output of the following commands in OSX Terminal? diskutil list Cs diskutil list sudo TPG - vv - r see the/dev/disk0 sudo fdisk/dev/disk0 The "sudo" commands will prompt to enter your password, and there do not appear to come back. You can also see caution against improper use 'sudo' and the potential loss of data due to an "abuse" of the order. Windows activation after the system restore. After the restoration of my HP Compaq Vista to factory settings, I get a message at the bottom of the screen saying "this copy of Windows is not genuine". The code number to activate Windows printed on the basis of the computer is not recognized. What should I do? Hello Make a phone Activation, do not follow the guests from the car and hang for a real person explain to the. "How to activate Vista normally and by Activation of the phone ' http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html See you soon. FURIOUS! IS NOT EVEN THE WORD HERE! I only got my sony notebook 1 year. I accept an update for Windows Vista 2, NOW your laptop! Files corrupted with Checksum error. I have not even where begin to fix this error. It does not start. I have NO installation disc, they do not come with computers more! So I'm stuck using the library computer. MAD! How dare they not warn that a simple upgrade of service packs would lose a whole years of documents, articles and any other thing, we left. HOW ON EARTH I FIX THAT AND ROLL BACK TO VISTA 1? F2 ONLY BRINGS ME TO COMPUTER CONFIGURATIONS. WHAT SHOULD I DO? RUN NOW AND SPEND 100.00 TO BUY A NEW VISTA INSTALLATION? YES. CONSUMPTION SHOULD KNOW THIS IDEA OF BANK OF WINDOWS ROLL. See if that helps How to uninstall Windows Vista service packs as a troubleshooting step Before trying again: Learn how to install Windows Vista Service Pack 2 (SP2) Information about Service Pack 2 for Windows Vista and Windows Server 2008 If you value your data, you need to be backup on a regular basis, what would you do if your computer has been stolen or if the hard drive suddenly gone wrong? Please don't say you lose a whole years worth of documents and articles etc. as if it was that important to you, you would have these data backups. If you don't back up your data and you lose, it's your fault. TaurArian [MVP] 2005-2010 - Update Services I have Roboform on my computer. It used to be on the toolbar for Firefox, but it has disappeared from version 5. How can I get that back? My lil brother has used a fake iphone charger to charge his Iphone on my mac pro and my cell phone shot someone had something similar happen? Help Satellite A210 - what cooler Zalman can you recommend? HelloI have Toshiba Satellite A210-16F and I am looking for a Zalman cooler. Which is more appropriate for my NB?Zalman NC - 1000 Notebook cooler,Zalman ZM - NC1500 Notebook cooler, orLaptop computer cooler Zalman NC-2000? Thank you. Various crashes, freezes, video glitches, audible clicks These kinds of things have been going on for some time. I get these kinds of things around once a week or more. Today video glitching presented, so I think it's time to do something. I get the gray multilingual screen accident sometimes, or restarts, How can I install spellchecker on my Windows XP computer? original title: How can I get the spell checker on my computer I can't spell checker on my computer
****************************************************************************
* Loading of the symbol may be unreliable without a symbol search path. *
* Use .symfix to get the debugger to choose a symbol path. *
* After adjusting your path to symbols, use .reload to refresh the locations of symbols. *
****************************************************************************
Executable search path is:
*********************************************************************
* Symbols cannot be loaded because the path is not initialized. *
* *
* The symbol path can be defined: *.
* using the _NT_SYMBOL_PATH environment variable. *
* with the help of the
* using the .sympath and .sympath + *.
*********************************************************************
Cannot load the image \SystemRoot\system32\ntkrnlpa.exe, 0n2 error Win32
WARNING: Unable to verify timestamp for ntkrnlpa.exe
ERROR: Module load completed but symbols can be loaded for ntkrnlpa.exe
Windows 7 Kernel Version 7600 MP (2 processors) free x 86 compatible
Product: WinNt, suite: TerminalServer SingleUserTS
By: 7600.16385.x86fre.win7_rtm.090713 - 1255
Computer name:
Core = 0 x 82803000 PsLoadedModuleList = 0x8294b810
The debugging session: 11:50:54.734 Saturday, August 8, 2009 (GMT + 3)
System Uptime: 0 days 0:00:19.343
*********************************************************************
* Symbols cannot be loaded because the path is not initialized. *
* *
* The symbol path can be defined: *.
* using the _NT_SYMBOL_PATH environment variable. *
* with the help of the
* using the .sympath and .sympath + *.
*********************************************************************
Cannot load the image \SystemRoot\system32\ntkrnlpa.exe, 0n2 error Win32
WARNING: Unable to verify timestamp for ntkrnlpa.exe
ERROR: Module load completed but symbols can be loaded for ntkrnlpa.exe
Loading the kernel symbols
...............................................................
................................................................
..........
Loading user symbols
Loading unloaded module list
.....Similar Questions
Starwinds V2V converter converts the virtual hard disk into a vmdk
This vmdk is assigned to a new virtual machine
first boot the virtual machine goes into a Windows 7 drivers restore CD you patch
First we recommend that you search the .ics files confirm the windows calendar old files are present on the hard drive.
Visit this link for more information: http://windows.microsoft.com/en-US/windows-vista/Tips-for-finding-files
1. open the system restore by clicking the Start button, all programs, accessories, clicking System Tools, and then click System Restore. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
2. click on undo system restore and then click Next.
3. proceed to review your choices and then click Finish.
For more information, see this link: http://windows.microsoft.com/en-US/windows-vista/Undo-System-Restore
Syed
Answers from Microsoft supports the engineer.
Visit our Microsoft answers feedback Forum and let us know what you think.
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.
Normally, I turn on my PC, and about 30 seconds later, a window pops up asking you my password. After entering it, the PC come by my office. Now, when I turn on the PC, it brings me to a blue screen with a mouse cursor in the Center (which I can move), but there is nothing to click on.
When I press F8 during the boot process and choose an option from the window "Advanced Boot Options", I still can't start my computer normally.
Here's the "Advanced Boot Options" I tried, after consultation with my brother a little more PC-savvy:
1 repair your computer - after I see my black screen that is usual with the words "Microsoft Corporation" under the green bars that scroll from left to right for about 15 seconds, a blue screen appears with the mouse pointer in the Center (which I can move), but there is nothing to click on.
2 mode safe - while the PC display several files on start up and down, it stops on "Loaded: \windows\system32\drivers\disk.sys" for about 20 seconds, then proceeds to a black screen with the words "Safe Mode" in the 4 corners and the mouse cursor at the Center (which I can move), but there is nothing to click on.
3 safe mode with network - see "Safe Mode" above.
4 safe mode with command prompt - see 'Safe Mode' above.
5 last known good Configuration (Advanced) - see "repair your computer" above.
6 start Windows normally - see "Repair your computer" above.
7 debug mode - see "Repair your computer" above.
I downloaded a DVD recovery based on Linux in knopper.net, allowing me to access important files, which I copied from the desktop to an external hard drive (4.1 GB iso file).
PC Windows XP of my brother has a recovery disk, but my Windows Vista PC did not come with one. I've seen a few paid versions, but looked resources due to cool weather and free shipping.
I can't tell if I have the 23-bit or the 64 bit version of Windows Vista, so I downloaded both versions of an open source sourceforge.NET startup repair, which I burned on 2 DVDs. After you run the startup repair program using two DVD, the diagnostic results have been uploaded online at ubuntu.com for review and technical analysis. Here are the links:
http://Paste.Ubuntu.com/16018001/
http://Paste.Ubuntu.com/16019372/
http://Paste.Ubuntu.com/16040380/
The last report ended with the words "start managed to fix...". You can now restart your computer. "But I always encounter a blank screen (black or blue) when I try to log on to my PC.
Here are my details of PC, if it is useful:
Desktop Compaq Presario SR5130NX
Serial number: [personal information]
Product number: GC667AA
Warranty end date: October 5, 2013 (according to Compaq/HP.com)
http://support.HP.com/us-en/product/Compaq-Presario-SR5100-desktop-PC-series/3436764
Thanks for any help you can provide.[1] [11] NTFS-3 g / important
HOW to get WinXP SP1 or SP2 fully patched after a "clean install".
If you want a good, paid AV, download NOD32 or F-Secure.
Two decent free are Avast and AntiVir. MowGreen Services consumer safety update
Remove if inserted usb devices all.
I don't know if it will help but try to set the bios default settings (when you see the lenovo logo, press f2)
http://support.Microsoft.com/kb/948537
http://windowshelp.Microsoft.com/Windows/en-GB/help/105f7420-6f7f-4FE8-8698-2f40ca5f53711033.mspx
http://support.Microsoft.com/kb/948465Maybe you are looking for