Cannot take a picture of screen shot now?

Similar Questions

• Cannot take a picture with the Camileo X 100?

  After connecting my Camileo X 100 with the RCA connector to my LCD from LG TV, browsing through my images and possibly disconnect the camera, something strange happened.

  After I turned on the camera and tried to take a picture, nothing happened. I can't take a picture, turn a video, zoom in and out, or set the image and video preferences and settings. I can only navigate through the pictures and videos I took before. It seems that my camera is stuck in the same mode, when it was connected to my TV.

  I removed the battery several times and nothing. The only button that responds is the play button, and trying to take a picture, only the square (white, green, or red) is shown. Please, help :(

  Thanks for your comments!

• Canon G12_I cannot take a picture. Purple lines fade in and out, then black screen.

  Uploaded a few photos off the G12 and then charged the battery and when I reinstalled the battery I could see pictures, but when I switch them to camera mode I have brief purple lines then black. And I'm not able to take pictures. Help!

  Uh oh, sounds like the processor or sensor could have retired. I have to assume that you can not access the menu to do a complete reset of the system, so I remove the battery and try to keep about an hour. With the battery, press the power button and hold for about 10 seconds. Then, reinstall the battery and see if it does the same thing. If so, you may need to contact Canon on a repair, but that could be very expensive. It could have been a static load that occurred when you changed the battery, otherwise the processor or the sensor has reached the end of the line.

  I feel your anxiety that I have a PowerShot G12 and this is my favorite camera. It is used there, and some refurbished, to replace it. I hope you can get it running again.

  Steve M.

• Cannot take a picture even if I have storage iCloud

  I bought storage additional iCloud for my phone but when even can't take a photo because 'there is not enough storage to take photo' even if I got 48.8 GB available storage iCloud!

  Do not forget that iCloud that photo library is designed to reflect your library on all your devices. In order to have a lot of storage iCloud does not mean that you don't need any (extra) storage space on your iPhone.

  You can however use the "Optimize iPhone storage" setting located under settings, iCloud, Photos, Photos & camera or settings. When this option is selected, most of the photos that are stored on your iPhone will be reduced versions, good enough for display on the screen of your iPhone. This may, or may not create enough free space on your iPhone to take new photos.

• Please read and understand the following question: When can I find pictures of screen shots of Vista ([i.e. the file where are stored the images])

  I need to see the image of screenshot of Vista.  Don't want to take them or save them or print them.  I don't have Vista.

  http://www.bing.com/
  http://www.Google.com/

  Go ahead!

• I broke my screen, and now cannot drag to open it.  I have an alarm that don't go.  I also want to synchronize my phone before I take it buy a new one.  Is it possible to synchronize and watch my calendar for the next few days?

  I broke my screen, and now cannot drag to open it.  I have an alarm that don't go. I can let the battery die I know but I really want to be able to access and examine what are the texts I received today. I think that my ICloud is can be disabled. I also want to synchronize my phone before I take it buy a new one.  Is it possible to synchronize and watch my calendar for the next few days?

  Without entering your access code, it is not possible, unless your time is in iCloud. If this is the case, connect to iCloud.com to check your calendar.

  Good luck.

• Cannot take pictures iPhone 5s and hidden folders

  Husband has iPhone 5s, and it cannot take any more pictures with a storage in full.  Sometimes he wanted to completely import/erase photos off phone, sometimes import but not erase.  Apparently (according to iTunes when connected), it has an insane amount of photos stored on the phone SOMEWHERE, but his camera is COMPLETELY EMPTY! When you connect to the computer again, and she asks if we want to import photos, we say Yes (just for fun now), and he says there is still no new pictures to import. (for a good reason because he can't take pictures and the film file is empty).

  How to access or import these photos hidden this iTunes dashboard says that he has, then he can use his camera again? They must be stored somewhere on the motherboard right?  BTW his iPhone isn't a year old, but either.  Never had this problem before with sound or all other iPhones, so we are baffled.  It won't restore to factory settings due to other information that he does not want to lose in the process, even if we backed the phone up to iCloud and computer via iTunes.  ANY SUGGESTIONS PLEASE? DOES ANYONE ELSE HAVE THIS PROBLEM?

  Thank you!

  iPhone 5 s

  The images are probably corrupt and occupation of space while not clearly rendered like pictures and available in the Photos app

  This article can help

  1. What is others and what I can do about it - CSA

• After the response failed to ema joining photos, l had opening of 'problem'... "" try again "screen but now cannot open new screen msg at all for the new message or a reply. Access always able recd emails. Vista 32

  After response failure attaching pictures to the email received, l had opening of 'problem'... "" try again "screen but now cannot open new screen msg at all for the new message or a reply.
  Hope I'm doing this right - tried restar, apparently seeking the answers and by publishing this request elsewhere. Appreciatte guidance!

  Hi Mike,.

  You are welcome. If you have any other questions, you can always report to Microsoft Answers.

• Win + PRTSCN don't take or record screen shot-shortcut remapped?

  Hi all. I just got a new Toshiba laptop with Win 8. I'm having some trouble taking screenshots. It seems that the keys are not the standard ones to win 8. Here's what I know:

  . Print screen alone does nothing.

  Win + print screen does nothing.

  FN + print screen copies the screen shot, just as I expected print screen only.

  FN + alt + PRTSCN copies and saves the screenshot.

  Now, here's the interesting part. If I pull up the keypad, standard shortcuts work.

  What happens here? This is important because I have a fracture of the hand and it is difficult to have to use both hands to do this because the buttons are on the keyboard of the other. I take a lot of them because I'm copy of diagrams in a series of video conferences.

  I tried the remapping of shortcuts using autohotkeys but apparently the fn key remapping is impossible, according to their chat support. I tried just remapping using win + print screen and copy but doesn't save, which is a new combination.

  It's infuriating. Any help would be appreciated.

  Well apparently, it does. I went to the Toshiba support community and there are, of course, people having the same problem, and the moderator there told people they should use the fn + print screen or just use the Snipping Tool. The key if it touches the print screen/end.. apparently he hit single is just the end key, and you must use the fn to switch to the print screen button. Absolutely ridiculous.

• When I take a screenshot by pressing the print SCREEN key on my keyboard, I can't get a screen shot in small size, in a Word document.

  Original title: screen printing.

  Hi supperman.

  I have a problem with the screen capture. When I take a screenshot by pressing the print SCREEN key on my keyboard, I can't get a screen shot in small size, in a Word document.

  someone knows the reason for this? How can I get a screenshot in a normal size. Thank you very much.

  Hi tony.wang,

  If you copy the screenshot in a Word file, it will be the default page of the word file size. It will be in a smaller size to fit into the Word file.

  However, if you want to open the full-size screen capture, you can use Microsoft Paint on Windows application.

  
  Reference: Overview of Microsoft Paint

  Hope the helps of information.
  Please post back and we do know.

• How do you take screen shots in windows 7 and where they save?

  I always use the button of the combination to take screenshots, which is the right key? And where the system screenshots are going? I'm a Dell with Windows 7 laptop operating company.

  When you select Prt Scr, the screenshot goes to the clip board.

  To see it, select a photo editing software like Paint (select the start ORB, all programs, accessories, paint)

  Then select Paste or CTRL + V

  Windows 7 also has a great program called the tool captures under all programs.

  It allows you to select a party any of the screen and save it.

  http://Windows.Microsoft.com/en-us/Windows-Vista/use-Snipping-Tool-to-capture-screen-shots

• How to turn off the menu in the middle of the screen while you take a picture?

  Hello everyone!

  It's something similar to this post: turn off the menu in the center of the screen.

  But the problem is displayed while taking a photo: I am posting one alarm full screen mode and wait for the interactions of the user on the screen or on the action button. This interaction takes the picture (and triggers my specific treatment), but it also displays elements of specific menu in the middle of the screen.

  Are there settings to set the field that contains the VideoControl to avoid this behavior?

  Thanks in advance.

  OK, the solution is to add a "return true" after the specific action, like this:

  protected boolean invokeAction(int action) {
      boolean handled = super.invokeAction(action);
      if(!handled)
      {
          if(action == ACTION_INVOKE)
      {
              takePicture();
              return true;
          }
      }
  }
  

• I hit a button and now this tab takes up the entire screen. How to bring back my browser?

  Website of the tab takes over the entire screen, even the line apps Windows downstairs. Hit the ESC does nothing. If I close FF and re - start, it goes back to the same state that it was when I killed him. Order No. FF buttons there so there is no way to reset it. The tab web site occupies the entire screen. Help! I use MS Internet Explorer to send this info that FF is currently useless.

  Sounds that you have enabled Firefox mode full screen (press F11 or Fn + F11 to toggle; Mac: Command + SHIFT + F).

  • https://support.Mozilla.org/KB/how-to-use-full-screen

  If you are in full screen view then hover over with the mouse to the top of the screen to facilitate the bar appear Navigation and tab bar.
  
  Click the expand (in the top right Navigation bar) to exit full screen or right-click on a space empty on a toolbar and select "exit full screen" or press the F11 key.

• Card memory locked, cannot take pictures... help!

  Hi all, hope you can help...

  I own a Sony Cybershot digital camera (14.1 mega pixels), model #DSC - W350. It is not in the support tech guide, so here I am.

  I took the camera at Wal-Mart yesterday to have fixed parameters (memory memory card internal settings images) and the woman took my photo when it was finished and it works beautifully. Today, for some incomprehensible reason to me, I can't take a picture. When I tried, the 'Card locked memory' message appears. I tried flipping in the menus, hoping to find the settings for the unlock, but nothing helped.

  Then... How to unlock a locked memory card? Any help will be appreciated muchly!

  Nevermind, y ' all... I thought about it while downloading via my Targus card reader little.

  Yeesh... so simple, just stupided ... answer is "simply the little tab yellow upward where it was pushed down before pushing" on the card itself.

  ; p

  Thanks anyway!

• Cannot take Photos using the LCD

  I just bought a D60 and when I try to take a picture using the LCD screen and auto focus it won't take the picture.  It will however, when I get out of auto focus or when I use the viewfinder.  But not using the LCD and AV screen on.

  Everyone knows about this problem?  If so, how to solve it?

  I assume you mean that the 60 d (he was in fact a D60, but it is more than 10 years.)

  Development of systems should has enough light and (b) an object with a certain contrast.

  For example: she would have a hard time focusing on a wall of ordinary color in dim light.  But if you give him something with contrast, going to an easier time concentrating.

  What kind of lighting you have and what kind of subject you want to photograph?

  Have you tried to test the system under ideal circumstances (beautiful light bright and contrasting topics?)

  Either way... using the camera through the viewfinder will still be faster to use liveview.  The camera actually uses different systems development depending on how you use it.

  When you use the viewfinder, autofocus camera sensors use "phase detection".  These sensors are not on the image sensor.   The reflex mirror bounces low light these sensors.  The sensors are looking for contrasting edges.  Through a Prism-like efect, part of the image moves in one direction and in the other part (imagine use a pair of scissors to cut a picture into two halves and then slightly evil align the image along the cut).  The amount of the displacement varies according to the distance of focus on the subject.   The camera is capable of analyzing the pixels along the edge to determine how the two halves should adjust, and with this, it can determine how the focus needs to be adjusted in order to bring together the image.

  There is an additional advantage to the phase system to detect.  The system is able to analyze all areas of focus at the same time.  The direction of movement tells the camera that he needs to focus closer or further away.  That means in a moment, the camaera knows _which _ AF point is on the nearest subject and he knows how and to what extent the development must settle before the picture comes to focus.  That means the phase detect AF systems is generally useless to "hunt" for focus... they know exactly which way to turn the update and how far to go to get a lock.

  The phase detection system is very fast.

  When the camera using the "live view" mode, the reflex mirror was swinging clear so that the light can strike the image sensor.  This means the tiny mirrors that bounce light in the development of phase-detect sensors are not in-game camera cannot use this system.

  Instead, it analyzes the image on the sensor trying to achieve maximum contrast in the target areas.

  The best example I can think of is to imagine a "UPC code" (bar code) and imagine what it looks like when it is 'in' focus 'out' of focus vs.  If it is, in short, you have a white background with rows of sharp, crisp, black.  But if you think that involved... colors each pixel is 'white' (background) or 'black' (scratches).  There is no pixel 'gray '.    Now, imagine this same barcode horribly blurred... you have a white background, but when you approach a black line, go you through a lot of "grey" get pixels gradually darker until you get to the black parts of the streak.   The camera knows that he emphasized when she reached the highest possible contrast between adjacent pixels.

  Unlike the "detection phase" development, the system of 'contrast' doesn't know what direction to adjust to get the update.  It samples should be taken... (adjust and see if it is better or worse... If it gets worse, reverse the sense of the update and try again).  Not only the computer did not have to do further analysis to detect if the image is sharp... He must do more iterations because of the problem of hunting of accent.

  Point & shoot cameras and 'live view' mode on cameras digital SLRS generally use this system of the development of "contrast detection.  The system is extremely accurate... but the drawback is that the computer has to analyze the image for contrast several times and it's not nearly as fast as the phase detect sensors (which are usually extremely fast).

  Cameras struggle to concentrate when there are nothing to do with contrast high to base its analysis.  They struggle in low light because there is not much difference between the dark and light areas.

  Canon has a new system called the "double pixel" AF.  They essentially combined the "phase detection" technology right on the sensor by creating micro-prismes on the surface of the imaging sensor itself.  The camera is actually capable of doing the "phase detection" style auto-focus directly on the surface of the sensor (never possible and Canon are the only company that got it.)

  The new 70 d is the first DSLR (and currently only) to get the system.

  If shoot you, you don't have the choice... the mirror must be upward in order to record videos so the camera can only use by contrast detection focus when shooting video *-with the exception of the D 70 because he can actually do "phase detection" focus directly on the sensor.