cannot trigger time DAQ and camera

Similar Questions

• Cannot access Time Capsule and MacBook Pro on Windows task force immediately after upgrade to Vista professional professional 7

  I had a Windows workgroup for years, linking the PC and Mac, but also a Linkstation network through a Time Capsule router/Hard Drive Combo.  Immediately after the upgrade from professional Vista to 7 Professional on my Sony Vaio VGN-Z750D, I can see the Time Capsule and MacBook but cannot access it.  I am able to access the Linkstation - system wonder a user name and password, and I have immediate access.  However, the system does not n = me a username and password when I try to access the two Apple products.

  Interestingly, I can access the Vaio MacBook, in providint the username and password for the Vaio.

  Please notify.  Thank you.

  IT FIXED!  Found the answer on the W7 Forum

  Access to Mac OS X Windows sharing Windows 7
  Windows 7 will not work with the Mac OS X Windows support for default share file. If you try to access a shared folder on Mac OS X, W7 will display a logon error repeatedly.
  The problem is that W7, by default, will only use NTLMv2 for authentication, which is not supported by the service of sharing of Windows of Mac OS x.
  The other problem is that safety minimum Session for NTVLM SSP based Clients.
  To work around this problem:
  1. in W7, open the control panel
  3. double-click on Administrative Tools
  4 double click on local security policy
  5 expand "Local policies" and select "Security Options".
  6. locate "network security: LAN Manager Authentication Level" in the list and double-click it.
  7. change the setting of "NTMLv2 only send responses" to"send LM and NTLM - use NTLMv2 session if negotiated"
  8. network Security: minimum session for the NTLM SSP (including secure RPC) Clients security
  9. change the setting of "128-bit" unchecked (No Minimum)
  10. click on OK

• How can I know if an external drive has been used for Time Machine and what computer it came with too?

  How can I know if an external drive has been used for Time Machine and what computer it came with too?

  I have several laptops and iMacs. I spent the relocation of the year and only used the MacBook Pro.

  Now I'm trying to figure out which drive goes with which computer

  I connected just a disk seagate 1.5 t and the first thing he did was to ask if I wanted to use it as a Time Machine drive.

  (1) if it is the TM disk accompanying this computer don't would not it have just started upward automatically?

  (2) what happens if I would have said yes?

  (3) I don't even know if it's been activated for TM. Is there a way to tell? It may hold just for iMovie files and other programs associated with a computer from my past.

  All readers of backup Time Machine contains a folder named: Backups.backupdb. If you open this folder, you'll find another folder with the name of the computer that has been saved. If several computers have been saved on the same disk, you will have several folders.

• I ran all virus time and time again and that you cannot get rid of this e-mail worm that continues to advance.

  I ran all virus time and time again and cannot get rid of this e-mail worm that continues to move forward, what I can do now, stop using hotmail?

  Hello

  Why do you think you have an e-mail worm? If you can't name it?

  If someone is Spoofing emails that appear to come from you then they probably never
  had access to your e-mail account. Instead, they have either a copy of your contacts
  list or just an email from you or one of you where you were one of the recipients. Those
  could be gleaned either your computer, the computer of a friend, or hacking
  any site or intercept an email on your behalf or to you (you may not be the main)
  (beneficiary).

  Once they have this information there is nothing you can do to avoid that they don't
  send usurped messages. Warn your friends that is happening and they
  can be entitled to install rules such as parodies are treated as SPAM or JUNK
  mail.

  I've even seen usurped by email that appears to be from a valid user name however
  This name doesn't have an e-mail account on the mail system used in parody.
  As SpiritX - AT - realmail.com may be a valid account, however, parody used
  SpiritX - AT - wrongmail.com. The latter could still be considered an email address valid
  SpiritX if it was allowed through JUNK and JUNK e-mail filtering. (The - AT - has been used
  instead of so that those addresses would not be filtered by auto responses.
  as if by magic.)

  ============================================================

  Proceed to a very thorough check for malware and then change your password by e-mail.

  The reason why you want to do this is to make sure no more hacking your computer is
  still in effect (if it has been hacked). You have changed the password once but I would
  Change it again after these checks.

  It is possible for a person to send the email that 'seems' to be of your
  account but that is not really - called "Spoofing." That means its 'Possible' emails
  were not really you, although they may have your contact list. Have someone
  who receives the e-mails to check the header to see where he is actually sent by and
  NOT only the answer to the address.

  How to read the message headers
  http://www.emailaddressmanager.com/tips/header.html

  What Email Headers can tell you about the origin of Spam
  http://email.about.com/cs/spamgeneral/a/spam_headers.htm

  E-mail spoofing
  http://en.Wikipedia.org/wiki/E-mail_spoofing

  E-mail spoofing and Phishing
  http://www.mailsbroadcast.com/email.broadcast.FAQ/46.email.spoofing.htm

  Understanding E-mail Spoofing
  http://www.windowsecurity.com/articles/email-spoofing.html

  Fraudulent emails (false)
  http://pages.eBay.com/education/spooftutorial/

  Google search - email Spoofing
  http://www.Google.com/search?hl=en&EI=FB1nS9DiNo7CsQPNhKGdAw&SA=X&Oi=spell&resnum=0&CT=result&CD=1&ved=0CAgQBSgA&q=email+spoofing&spell=1

  =============================================

  If you need search malware here's my recommendations - they will allow you to
  scrutiny and the withdrawal without ending up with a load of spyware programs running
  resident who can cause as many questions as the malware and may be more difficult to detect as the
  cause.

  No one program cannot be used to detect and remove any malware. Added that often easy
  to detect malicious software often comes with a much harder to detect and remove the payload. Then
  its best to be thorough than paying the high price later now too. Check with them to one
  extreme overkill point and then run the cleaning only when you are sure that the system is clean.

  It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
  the regular windows when you can.

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
  (If Rootkits run UnHackMe)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/products/malwarebytes_free

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can
  Download it here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with others
  security programs. It is a single scanner, VERY EFFICIENT, if it finds something to come back
  here or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp?prevx=Y  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Try the demo version of Hitman Pro:

  Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
  (viruses, Trojans, rootkits, etc.). who infected your computer despite safe
  what you have done (such as antivirus, firewall, etc.).
  http://www.SurfRight.nl/en/hitmanpro

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  -----------------------------------

  Original version is now replaced by the Microsoft Safety Scanner
  http://OneCare.live.com/site/en-us/default.htm

  Microsoft safety scanner
  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  ----------------------------------

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing
  system files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
  RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker
  (SFC.exe) program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  ========================================

  Answers is a peer group supported and unfortunately has no real influence on Hotmail.

  HotMail has its own Forums, so you should ask your questions there if the above do not help resolve.

  Windows Live Solution Center - HotMail - HotMail Forums Solutions
  http://windowslivehelp.com/

  Hotmail - Forums
  http://windowslivehelp.com/forums.aspx?ProductID=1

  Hotmail - Solutions
  http://windowslivehelp.com/solutions.aspx?ProductID=1

  How to contact Windows Live Hotmail Support
  http://email.about.com/od/hotmailtips/Qt/et_hotmail_supp.htm

  Windows Live Hotmail Top issues and Support information
  http://support.Microsoft.com/kb/316659/en-us

  Error message "your account has been locked" when trying to connect
  http://windowslivehelp.com/thread.aspx?ThreadId=77be7d82-a0e9-49c7-b46d-040ec654a9e2

  Compromised account - access unauthorized account - how to recover your account
  http://windowslivehelp.com/solution.aspx?SolutionID=6ea0c7b3-1473-4176-b03f-145b951dcb41

  Hotmail hacked? Take these steps
  http://blogs.msdn.com/b/securitytipstalk/archive/2010/07/07/Hotmail-hacked-take-these-steps.aspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• I've been using Lightroom 5 about 1 &amp; 1/2 years and he lost everything last night, as I install it. I tried to use time machine and I get this message; 'Applications' cannot be modified or deleted because it is required by OS X. Any help or suggestion

  I've been using Lightroom 5 about 1 & 1/2 years and he lost everything last night, as I install it. I tried to use time machine and I get this message; 'Applications' cannot be modified or deleted because it is required by OS X. Any help or suggestion?

  Hey Mohit & John,

  I just restarted since a lightroom 5 top date & he got almost all of my files!

  Linda

• Time capsule and extreme; Cannot create the roaming network

  Problem: when you try to create a network roaming with time capsule and extreme, the wifi hangs and the network is up and down. Here are my deets:

  TC and extreme as well have the latest firmware of the 7.7.7 are the latest generation of products, purchased in the last 12 months

  TC is connected to Arris SB6183

  ISP is Cox North san diego County

  TC is then connected to the netgear GS105. (upstairs)

  NETGEAR GS105 then connects to GS108 (down in the patch panel in the closet of the master bedroom)

  1 x GS108 port connects to extreme

  I can get the stable network and works correctly as long as I don't have connected and extreme.

  I followed the instructions provided by apple in their "how to set up a roaming network.

  I have hard reset the devices apple repeatedly in my attempt to get things to work

  I started a Wan shortly ago at the connected WiFi and that was stable and work for not more than 30 minutes and then it went offline.

  So here I am now. Unable to get back online and stable with two apple devices connected network.

  System was stable and working well before the upgrade to 7.7.7. I had a wifi connected network not a roaming network at the time.

  Any suggestion would be great and really appreciated.

  Thank you

  After screenshots of the TC and AE installing airport utility.

  I suspect that you simply have something set wrong...

  Main error is to use extend wireless when it is connected by ethernet... This will create a loop and bring down the network.

  The two units must be defined to create a wireless network... both must use the same name (SSID) and the same password, but must be set to different channels.

  It is almost impossible in this case crashing the network since the two are completely independent Wireless Access Points... (WAP).

  The TC must be in router mode... EI must be in the bridge (bridge mode off on the network tab.)

• computer cannot detect the scanner or camera

  When I plug in my digital camera Canon for my xp, then turn it on, I hear a small beep, then nothing. When I go into the Panel, printers and other equipment, scanners and cameras, I see 2 points. 1 is, WIA Canon MX310 SER. The 2nd one is Canon PowerShot SD1300IS. I then click on the Canon PowerShot SD1300IS and then get pictures, but nothing happens. The cameras screen display turns off, but that's all. It seems to be connected to the computer, but not to download pictures.

  When I keep trying I sometimes get an error message, the computer cannot detect the scanner or camera.

  How can I solve this problem and download my photos?

  Thank you Tim

  Hey volunteer J;

  Thanks for the help, but it did not help.

  I found the answer on page 2 of microsoft answers, xp, images and videos.

  6 questions down, how to re install microsoft scanner and Camera Wizard.

  It turns out that some tech volunteer known as J (is it you?} came across the solution to my problem on this site:http://www.veiled-chameleon.com/weblog/archives/000231.html )

  I have used PC Cleaner on this xp, and I think he may have disabled some of the registry keys. For me, I had to start my pitcher of DCOM Server, RPC, Remote procedure Call Locator process and put them on automatic. Once I rebooted, everything works great.

  I'm so happy that tech Volunteer J, done everything search last December. I bet it helped a ton out of veterans with our cameras. How did he find veiled Chameleon? Wow he must be smart enough.

  Thank you for volunteering j. (is it you?)

  Thank you Tim

• Storage utilization &amp; iCloud &gt; storage management &gt; Photos and camera

  I'm trying to free up storage on my iPhone 6 more running iOS 9.3.1. Photos is empty. Recently deleted photos is empty. Photos is disabled in settings > icloud > photos. The rockers are disabled in the settings > photos and camera. But its still appearing as using 440 MB of storage in the photo library and 30.6 MB in shared photo streams.

  

  How to explain and free this storage? Are there ghosts stored photos? All other discussions on this topic as the change of date and time has not worked for me.

  Is this storage room # or iCloud?

  If you connect to iCloud.com, see you there in Photos?

• Full Mac, trying to move the library to SET of photos, but there are corrupted files, cannot locate these files and am stuck!

  Mac Tips Please! I bought an EHR to move my entire photo library like 7yr old MacBook is full to the brim and I need to backup my phone as his shattered and needs sending out of fixing!

  Now, it won't save my picture library on DHM (to remove Mac) as some pic (s?) (among the 35000) are corrupt (but I have no idea of who or how many). I tried to restore the library several times, but then it freezes and says it cannot open the library, it can in fact - but not when restoring it.

  I have now to turn my new SMT in another time machine and saved everything on there. Should I try and remove my library on Mac and then restore from time machine? What this will do to my corrupted files? And it is likely to be able to register then EHD?

  Photo, not iPhoto uses...

  Adevice greatly appreciated!

  What size is the drive?  For Photos, it may be only Mac OS extended (journaled)

  and you can't have photo library on the same amount of time Machine backup

  You can probably clone the library for the EHD with SuperDuper or CarbonCopyCloner or other clone software

  LN

• Try to set up Time Machine, and I get this error; Keychain 100001 error while creating a system Keychain entry for the username "JGarrett" and the URL ' afp://JGarrett@JPG Capsule._afpovertcp._tcp.local./Data time airport.

  Have cleared airport Time Capsule and factory reset after getting this message.  Don't know where to go with it.

  Some files have a property incorrectly together which will prevent them from being changed or deleted when the system is running. This property cannot be removed in recovery mode. If you do not feel that you can do this yourself, please someone more experienced to help you get.

  1 back up all data. There are ways to back up a computer that is not fully functional. Ask if you need advice. Don't skip this step.

  2. disconnect all external storage devices.

  3. start in recovery mode. Select a language, if you are prompted. The OS X Utilities appears. One of the options is to install OS X. This is not what you do.

  4. This step is only necessary if you use FileVault 2. If you don't know what's FileVault, you use it. Go to the next step. Otherwise, launch utility disk, then select the icon for the volume FileVault ("Macintosh HD", unless you have given it a different name.) It will be nested under another icon of the disc. Select open in the file menu and enter your login password when you are prompted. Then quit disk utility must be returned to the main screen.

  5. Select get online help. Safari will launch. While in recovery, you will have no access to your Favorites, but you won't need them. Load this web page.

  6. triple - click anywhere in the line below to select this option:

  chflags norestricted /V*/*/L*/Keyc*/*

  Copy the selected text in the Clipboard by pressing Control-C key combination.

  7. Quit Safari. You go back to the OS X Utilities screen.

  In the menu bar, select

  Utilities ▹ Terminal

  Launch the Terminal application. Paste in the Terminal window by pressing the command-V key combination.

  Wait for a new line ending with a number sign (#) to appear. Quit the Terminal must be returned to the main screen.

  8. Select

  ▹ Restart 

  in the menu bar.

  9. This step must be performed after the restart, and while you are logged as administrator, not in recovery mode. If you have only one user account, you are the administrator.

  Select and copy this line as in step 6:

  sudo xattr -c /L*/Keyc*/*

  Launch the Terminal application integrated in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  Paste in the same Terminal window. You will be asked for your login password. Nothing displayed when you type. Type carefully, and then press return. If you do not have a password, you will need to configure one before you can run the command. You can get a warning to be careful. Confirm. You don't need to display the warning.

  If you see a message that your user name "is not in the sudoers file", then you have not logged as an administrator. Log in as one and start over.

  Wait for a new line ending with a dollar sign ($) below what you entered. You can then quit Terminal. Test.

• at the same time production and measuring the pulse

  Hello everyone,

  I'm generates a pulse for specific time. Now, I want to measure within the same daq card. I've done Vi for him but he has an error. I have USB daq-6343. I enclose my Vi here.

  The problem is I am able to get pulses generated at PIN 6 PFI but reading Vi watch time-out error.

  I plugged the wire between PFI 1 pin and PFI 6 pins on the DAQ card.

  So please suggest me what to do to eliminate this error.

  Thanks & best regards,

  I just looked at your original vi, I had looked only at the most distant (corrected) a previously.  I don't see a good reason to read timeout error you have immediately.  Record of an error timeout on your attempt reading suggests that the code was executed without error so far, including the beginning of the generation of pulses.  That would leave wondering on physical cable connection or possibly some undesirable side effects caused by your cleanup code when you three States a PFI lines.

  The other issue was my suggestion to leave DAQmx Timing.vi outside of the configuration string entirely for cases like this where you only want to build a single pulse.  To be honest, it's a habit & practice I adopted a long time ago.  I thought one of the reasons was that the finished pulse trains required a minimum of 2 samples.  A bit of test code showed me that it isn't true, if my memory tells me there was a time when it * used * to be true.  I don't remember if I have errors or if the task has chosen to generate 2 pulses with just a warning, or something.  I just remember that, while he was working on a module that was supposed to be able to produce any number of pulses from 1 to N, I found that I wasn't actually able to support the case of 1 pulse by asking just 1 sample over sample mode.

  * Anyway *, the other reason to avoid sampling over for a single pulse mode is that in the past, this would consume actually 2 counters on DAQ cards.  Generated the pulse (s) while the other was a help that triggered the first to control the number of generated pulses.  It was unnecessary as you could * also * generate a single pulse leaving the DAQmx Timing.vi out of the config, a method that used only 1 meter.

  X-series cards (like yours) don't consume over 2 programmable counters of the user to generate finite pulse trains, so the lesson I learned a long time ago and was trying to convey is perhaps not so important in your case.  I recommend it even if you know that you will always generate a single pulse, simply because he considered the standard way to generate a single pulse (as seen in examples of navigation).

  -Kevin P

• PCI-6025E (DAQ) and cards-1409 (Image Interface) PCI

  Hi friends,

  I have PCI-6025E (DAQ) and cards-1409 (Image Interface) PCI installed on the Windows XP desktop, that connected to the deducted Mikron camera.

  Recently I spend my Labview to 8.6, but the Mikron camera installation software does not work.

  How can I solve the problem?

  Anyone have the installation software (PCI-6025E (DAQ) and cards-1409 (Image Interface) PCI)?

  Any suggestion is appreciated.

  Thank you

  Jack

  jackp6,

  For the 6205E you will need to download an install the Drivers OR-DAQmx which you can find here:

  NOR-DAQmx

  http://Joule.NI.com/nidu/CDs/view/p/ID/2214/lang/en

  The 1409, you must NEITHER IMAQ drivers that are included in the following the Acquisition of vision available here:

  NEITHER Vision Acquisition Software 2,010.08

  http://Joule.NI.com/nidu/CDs/view/p/ID/2137/lang/en

  Please let us know if you have any other questions.

  Kind regards

  Sam K

  Technical sales engineer

  National systems

• I was checking my installed updates and came across a file that failed to install. It was the Cumulative security for Windows Vista (KB976325) updates

  I was checking the updates installed and came across this:

  Windows Vista cannot install cumulative security updates

  Error: 80200010

  Give this triple McAfee fix, a tourbillon: http://service.mcafee.com/FAQDocument.aspx?id=TS100507 ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Remove/hide list "Scanners and cameras" in the "My computer" window

  I tried to stop the "My computer" window registration "Scanner and camera" icons It seems that some make a strange link with HP scanners strives which slows down to the top of the window opening. Originally a freeze for 5 to 10 minutes of my entire office. Currently through TweakUI I can hide icons "Control Panel" and "files stored on this computer". But I have not discovered a way to do it for 'scanners and cameras '.

  I didn't know that I get a lot of responses to this question, given THAT XP is basically a dead horse. But I tried when even because I'm trying to help a friend who refuses to go there "change." I discovered a work-around if this isn't really what I think, it is a perfect solution. I disabled the devices scan HP from the Device Manager. Now, when you open "My computer", is there no time lag or delay to all the records and player items display in the window.

• Cannot transfer photos from the camera...

  Cannot transfer photos from the camera... Just recently, during the month, Windows XP does not recognize both our Sony A100 camera or card reader when you try to copy photos in a computer file - it has always in the past.  Interestinly, there recognzies the photos and can do a slide show of the card reader or camera, but does not recognize them when you try to transfer using Windows scanneer and camera Assistant.

  Hi Byron,

  Thanks for posting in the Microsoft community

  From your problem description, I understand that the digital camera is not getting recognized on Windows XP. Please let me know if you do not experience this problem.

  You did changes to the computer before the show?

  I suggest you try the following steps:

  Method 1: Hardware devices do not work or are not detected in Windows
  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Method 2: A digital camera is not recognized in Windows Vista or Windows XP
  http://support.Microsoft.com/kb/927836/en-us

  Hope this information is helpful and let us know if you need help with Windows in the future. We will be happy to help.