Cannot use more than 184 GB of data on TB LUN 2.14 store

I have a Dell R710 set up with 5 X 600 GB disk in raid 5. We wanted to try to ESXi, but have encountered a problem. When I go to create the data store ESXi shows I 2.14 TB of storage, but it only allows me to create a 184,62 GB data store. I tried to delete the virtual disk from Dell and build a new raid set without success. I tried the block size in ESXi and even the option of scores available and the same thing happens. Any ideas. Thank you in advance.

Advertisement

You will need to create a slightly less than 2 TB LUN. ESX (i) acknowledges that LUN 2 TB-512 b in size. You can use the virtual disk Dell to create 2 discs and two of them present to ESXi.

Tags: VMware

Similar Questions

  • cannot use more than once back or cant use BACKSPACE to delete a letter when typing email or Word Help.

    Original title: cannot use the BACKSPACE or repeated letters

    If typing an e-mail or Word Help, I can't use the backspace over once to delete a letter. I also can not type two letters of same consecutively without highlighting with the mouse to delete and retype the letter.

    Check the keyboard settings in the control panel to ensure that delay and repeat rates are fixed limits on use.  There is a test there area where you can test your settings.

  • Satellite L505-10J - cannot play more than 30-60 min

    Hello

    I just bought the Toshiba L505-10 days last week and I'm really satisfied with my choice, but when I run a game like Counter Strike Source or Risen I have some strange problems. The first 30 to 60 Minutes are Ok, but then the sound starts cracking and my mouse stops (Razer Lachesis) shifts when I hold a key on the keyboard (for example, W to go forward). When I go to my office while playing this problem disappeared (I opened Notepad down W and moved the mouse. No problem at all). When I switch back is there once again. The only solution to this problem is to restart my computer. Then I can play the next 30-60 minutes before it starts all over.

    I have already reinstalled Windows 7, but the problem is still there.
    When I use my Touchpad instead of my mouse is the same thing. Cannot play more than 30-60 min...

    This is not acceptable, because I want to play games on my cell phone at any time.

    Hope someone can help me and sorry for my bad English, I'm from the Germany.

    Hello

    As I understand it, this problem occurs only playing games.
    There is no problem to use the laptop with another application.
    Is this good?

    Hmm how about graphic card driver update and BIOS update?
    If more recent versions are available then it would be desirable to update!

    Check it!

  • How is it you can't use more than 126 GB of a 1.5 TB with LabVIEW Real-time hard drive?

    How is it you can't use more than 126 GB of a 1.5 TB with LabVIEW Real-time hard drive?
     
    It's only 8.3% of disk space!

    http://digital.NI.com/public.nsf/allkb/E7E2F5657B6026358625750B007201A6?OpenDocument

    The national Instrument is reformat that you drive less than 126 GB or replace the drive with a less than this size.

    Please OR tell me you go fix your LabVIEW Real Time soon, and that we will not have to wait for LabVIEW RT 9.2.1 in 2011 for this one to fix.

    http://upload.wikimedia.org/Wikipedia/Commons/9/90/Hard_drive_capacity_over_time.svg

    Readers as high as 126 GB or more have been around since mid-2002.  It's about 7 years now and LabVIEW Real-time STILL cannot use greater than 126 GB drives!  Please OR.  Do something.

    We deserve the patches for older versions of LabVIEW RT.  What about updates to LabVIEW RT.  As 7.0.2 7.1.2 7.6.2, 8.0.2, 8.2.2, 8.6.2.

    We don't need new features or versions of LabVIEW RT as 9.0 until we have some of the bugs fixed in existing versions.

    Kevin.


  • SegmentedControl: WARNING: cannot display more than 4 segments allowed on the screen.

    I "ve defined a custom control:"

    import bb.cascades 1.0
    
    Container {
    
        property alias text: label.text
    
        background: Color.create ("#262626")
        bottomMargin: 30
        layout: StackLayout {
            layoutDirection: LayoutDirection.TopToBottom
        }
        Label {
            id: label
            text: "..."
            textStyle {
                base: SystemDefaults.TextStyles.TitleText
            }
        }
        SegmentedControl {
            Option {
                id: option1
                text: "A"
                value: 5
                selected: false
            }
            Option {
                id: option2
                text: "B"
                value: 4
                selected: false
            }
            Option {
                id: option3
                text: "C"
                value: 3
                selected: false
            }
            Option {
                id: option4
                text: "D"
                value: 2
                selected: false
            }
            Option {
                id: option5
                text: "E"
                value: 1
                selected: false
            }
        }
    }
    

    And have used it as such:

    import bb.cascades 1.0
    
    Container {
        background: Color.create ("#262626")
    
        layout: StackLayout {
            layoutDirection: LayoutDirection.TopToBottom
            leftPadding: 20
            topPadding: 20
        }
    
        RatingControl {
            text: "Eli"
        }
        RatingControl {
            text: "Hazel"
        }
    }
    

    But when I load the app, I get this error:

    SegmentedControl: WARNING: cannot display more than 4 segments allowed on the screen.

    Ah, some so I missed the fact that only 4 of my 5 segments were displayed in the preview of the user interface, which should have been a hint.  So, this is just a warning.

    Something else that threw me off was that my UI was not poster when I actually loaded it in the Simulator, but I think it's because I need to have a Page at the top of main.qml, not a simple container.

  • Cannot open more than 1 folder in Windows 7

    Hello! Running win 7 ultimate.

    I'm unable to open other windows of records once 1 is open. I cannot use that explore and must use the navigation pane to open the other files. Its very annoying that I can't open multiple folders! The funny thing is it works for a short period of time, just after I reboot, but the stops working there after. Someone has an idea, what happens? So frustrating!

    TIA!

    Hello

    Welcome to the Microsoft Community and thanks for posting the question.

    As described, cannot open more than one folder.

    Run the Fixit and check if it helps.

    Diagnose and repair Windows files and folders problems automatically

    Hope this information helps.

    Answer to us if you are having problems with opening files or any other issue of Windows, and we would be happy to help you.

    Good day!

  • Calc Dynamics Processor cannot allocate more than 350 the heap block of

    Dear users of Essbase,

    I am trying to implement some logic in order to get my calc done by dynamic calc and formula on members.

    My dynamic member calc with formula is not limited to offsetting the conditional statement to the role of alternative only, I see no problem.

    But in order to get the correct result, I include under condition ISMBR statement and restrict level 0 patch replacement on a sparse Member, I get this ' error Essbase (10127000): dynamic calc processor cannot allocate more than the blocks [350] from the jump. The parameter CalcLockBlock is too low or the size of data cache setting is too low. Increase the setting of the CalcLockBlock or the size of data cache setting and then try again '

    IF (@ISMBR (@RELATIVE("ALTERNATIVEROLLUP",0)))

    IF (@ISUDA ("SCENARIO", "XXX"))

    do something...

    ENDIF

    ENDIF

    I looked through this forum and tried to fix my problem in making changes on Essbase.cfg of DATACACHESIZE and DATAFILECACHESIZE values.

    I also checked in the settings of CALCLOCKBLOCK and the error message shows his tent to allocate more than the default value no. blocks that is 350 blocks in my tests.

    I have CALCLOCKBLOCK with HIGH as 4900, settings default than 350. Hope this is good enough.

    As it is on the dynamic calc and formula approach based on, would like to know how to face this question set.

    If you have encountered this problem would like to take suggestions. Thank you.

    Kind regards

    Praveen

    Of course, JM, it was my test script.

    I would like to change my script to be the best :-).

    And I could get rid of the Essbase error in improving more all hides and CALCLOCKBLOCK parameters.

    The operating current system cann't be changed to try chaning type of dimension and other changes required for the TBLAST property. It is one of the obligation that I work. Then try my best to correct and come out with the best solution.

    It is easy to build the new app with fresh demands to try to include new features to the existing system.

    Thanks a ton for your time and your suggestions.

  • Why we cannot create more than one primary key on a table. Why we create several unique key on a table. Please explain if anyone have details of this.

    Why we cannot create more than one primary key on a table. Why we create several unique key on a table. Please explain if anyone have details of this.

    «a primary key has semantic meaning, it is to be immutable (never change of value), unique and not null.»

    a unique constraint is simply "at any time, these values are unique - they can change and they can be null.

    You use a unique when constraint

    (a) you do not already have a primary key for a table can have only one
    (b) you allow NULL values in attributes
    "(c) to allow you to update the values in the attributes.

    https://asktom.Oracle.com/pls/Apex/f?p=100:11:0:P11_QUESTION_ID:5541352100346689891

  • I work in a large project on my main composition and have always return all night but cannot give more than one inside and out...?

    Hello.

    I work in a big project on my main composition in 2015 of EI, Yosemite 10.10.5 and always return all night but cannot give more than one inside and out...?

    If I give several definitions in my composition to queue rendering, After Effects rendered all points, but only the last again and again.

    I never need to make multiple files during the night, so I don't know if this is normal or there at - there a Posibility to return more control then a?

    Kind regards

    Florian.

    It's one of these bugs CC 2015. It would be possible to set using render settings different, it seems to occur with specific formats.

    Mylenium

  • Configuration of 10g to use more than 1 CPU

    Hello experts,

    I have server Oracle 10.2.0.4 Enterprise Edition running on a Windows Server 2003 - Enterprise 64-bit.

    * The server has 4 Xeon processors *.

    We have a performance tool that we alert to an enrichment of the CPU.

    It seems that Oracle uses only a SINGLE processor.

    Is this normal in a 4-processor server?

    Can I make a configuration change to allow Oracle to use more than 1 CPU a CPU?

    Thank you very much. John

    You have several active sessions simultaneously (i.e. normal operation OLTP) relatively fast SQL statements running? Or if you use with a handful of active sessions that each runs relatively long SQL statements (i.e. normal DSS / operations data warehouse)?

    Unless you explicitly prevented Oracle to use several processors, it will use Fortunately each processor on the server. But if you have only one session active at a time and that the session is not running of the parallel operations, you would only end up using one of the available processors.

    Justin

  • Satellite Pro L40 PLS4BE: Can I use more than 2 GB of memory

    Is it possible add more than 2 GB of memory?

    What happens if I add e.g. 2 x 2 GB?

    Intel says GM965 supports 4 GB max memory...

    BR,

    Mikko

    Hello

    No you can not use more than 2 GB of RAM. You can upgrade the laptop up to 2GB (2 x 1 GB).

    > What happens if I add e.g. 2 x 2 GB?
    I think that nothing will happen ;)
    Either your laptop will not start or will start the laptop but the full RAM will not be recognized

  • Can I use more than one flash drive to ready boost on Satellite L650/0ed

    Hello

    I have a toshiba Satellite L650/0ed, it's good if I use more than one drive 8 GB flash for "ready boost" - what is the maximum number of using flash-drives can devote to the "ready-boost.

    In addition, if I use a 16 gb flash drive, will this affect more memory "ready boost".

    Why the 3.5 drive seagate expansion 1 TB is not compatible for ready-boost.

    Thank you
    -Brent907

    Hi mate

    Please check this Microsoft page that describes the ReadyBosst
    http://Windows.Microsoft.com/en-us/Windows7/products/features/ReadyBoost

    There, you can find this statement:
    + ReadyBoost works with storage devices more flash. In Windows 7, it can handle more memory and even multiple devices * eight *, for a maximum of 256 GB of additional memory. +

    I hope this can be useful!

  • Cannot print more than two pages

    Hello here

    I have a rather strange problem today: one of my users cannot print more than two pages...

    Regardless of the printer, the application or document, this specific user will receive the first two pages printed on the right, then a windows error (cannot print, the likely reason is a failure of the network, not enough memory, etc.)

    Current config is

    -User logged on the Witch of Windows 2008R2 Server Citrix XenApp 6.5 (published desktop).

    -Print server Windows 2008R2 with something like 150 shared printers

    I tried with other printers and file formats, on separate servers, it's always the same.

    Of course, everything works perfectly fine for other users...

    I'm not sure if any parameter can block printing up to two pages only, or anything else. Before you delete and recreate the user profile, as everyone has an idea?

    Grey'

    Hello

    Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

    http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

    See you soon.

  • How to activate my MSF program for I could use more than 30 minutes at a time

    I had to uninstall my Microsoft Flight Simulator X and MSF - program of acceleration of my PC and reinstall them.  I did it.  When I installed FSX-Deluxe edition, the program asked me the activation number, I gave and then reinstalled the acceleration program. He asked for all the numbers, but now when I run the program, it suits me after 30 minutes then and asks for the active program.  I tried to use the Enternet and everything, but I can't well any place where I can activate this program.  I even call your hotline, they were of no help at all.  First I did not understand that you are Tech. He talked so fast and has no sense at all.  My question is: How can I activate the program? without going to halfway around the world to do. I never had this problem in the past, why now?

    Chuck Baumgartner

    Hello

    I suggest you to follow the steps mentioned in the article below and let us know if the problem is solved or not.

    How to activate my MSF program for I could use more than 30 minutes at a time

    http://support.Microsoft.com/kb/925723

    Also check the links below.

    Frequently asked questions on how to enable Microsoft Games for Windows, streets and trips and Mappoint

    http://support.Microsoft.com/kb/927007

    Microsoft Flight Simulator X Service Pack 2 Readme

    http://www.Microsoft.com/products/games/FSInsider/downloads/pages/SP2-en-Readme.aspx

  • Cannot open more than 1 pdf with adobe acrobat dc. How to set up so I have to open multiple PDFs?

    Cannot open more than 1 pdf with adobe acrobat dc. How to set up so I have to open multiple PDFs?

    Hi markj15462400,

    Open Acrobat DC, navigate to the Edit-> Preferences-> General-> uncheck "Open Documents in a new tab in the same window.

    Restart your system & now try opening the files.

    Let me know if it solves your problem.

    Kind regards
    Nicos

Maybe you are looking for

  • My Firefox drop-down list no longer shows when I connect Internet. How can I get that back so I can clear my history?

    When I downloaded Firefox, there is a green button for Firefox on the top left corner of my screen. He's gone, so I can't do things like clear my history. How can I get that back? I don't know when he disappeared. My computer is only a month and I ha

  • Skype video calls

    If I'm on a video call with someone, he or she will be able to add another person to the call without my knowledge? If so, the other person will be able to view my video as well?

  • HP pavilion n248sa-15 drivers Win7

    (SorryI have a European accent) Hello, I bought this laptop with a Windows 8.1, but now I have windows 7, but can not find, if somene is going to help me where I can download driver I will be very greatfull. I tried HP but no results, just usb driver

  • Calculate RPM using NI 9402

    I'm looking for my first simple Labview DAQ project, if I am more comfortable with Signal Express. My torque sensor has a +/-5V, output speed 60 pulses/turn. The speed will be up to 200 rpm, so I myself turned to a NI 9402 module high speed IO digita

  • Where to download the bios?

    Where can I get bios updates? I don't find any bios file in the section support and driver.