Cannot use my Satellite L350 with ODD caddy

Hello!

I have 6 years of cca laptop Toshiba Satellite L350.

Now, I decided to get SSD for the OS HARD drive instead. So I bought MX100 Crucial SSD 128 GB and place it where was the HARD drive. For the HARD disk, I bought DVD SilverStone Treasure TS09 caddy.

On SSD, I install Windows 8.1 Pro MSDNAA (without HARD drive in the laptop). After that, I put HDD in DVD caddy and start portable computer. For now, Windows is not working properly, when it comes to the desktop it freezes, only thing I can open the Task Manager.

Why now computer laptop is not working properly?
Problem in DVD caddy... is not suitable for my laptop?
What can I do?
Do I have to change the properties of the Bios?
...?

Thank you and sorry for my English...

In the past, many people have reported on this. Problem is that Toshiba does not support these additional adapters and all people use some third party carts. In your case, I think that there are some compatibility issues.

If you have time to use the option of advanced search on this forum and try to find similar topics.
I use additional HARD drive, but as the external one.

It is unclear to me that some BIOS settings can be changed in this regard.

Tags: Toshiba

Similar Questions

  • Cannot use my Satellite A200 with TV

    Hello

    Sorry to bother you with this - I recently bought a Satellite A200-A1L and have tried to connect it to my TV via s-video cables... I am not new on this and know how to implement, but there seems to be problems on this laptop.

    I turned on the TV and set up everything to go, but my TV will not pick up the signal or the signal is not updated by the graphics card? My previous laptop worked fine with s-video and the same TV I have yet (a 24 "Sony Trinitron). I bought this laptop to do the same thing, but apparently it won't work no - is that you can do to help me please?

    Despite trying all the functions and the depth reading everything to do with video outputs AND all that says its fine just running will not work HELP ME!

    PS: I am happy with the laptop in general it's a nice piece of kit, I'm just unhappy that the s-video will not work correctly.

    Sincerely, Lisa.

    Hello Lisa

    I have too many Satellite A200 and I tested it with my LCD TV. Everything works fine, and all you have to do is to use the FN + F5 key combination and get on TV. Make sure that the TV is set to the right channel.

    All that s!

  • Cannot find my Satellite L350 - 10 H - external full HD video output

    Hello everyone.

    I have a problem with my satellite L350 - 10: when I try to join a second external monitor in full HD.
    Actually Im only able to duplicate my laptop with the same resolution (1440 x 900) display.

    I cannot set a Full HD resolution for my Samsung external monitor system.
    I don't think that can be a limitation of the Chipset because I can do that with all my laptop older, I have at home.
    Now the strange thing is that when I try to search for a driver on the Toshiba site, my model just do not exist!

    I put the serial number and the website doesn't recognize the model, and then in the list, this model do not exist.
    It is: * TOSHIBA SATELLITE L350 - 10 H *-WINDOWS VISTA HOME PREMIUM operating system

    Someone also has this model? How can I reach a full hd monitor?

    Hello

    First of all, if you take a glance on the European Toshiab driver page, then you will notice that the driver search engine does not contain the sub model numbers but series numbers this means that you need to check the model number and then could find the right drivers.

    As far as I know the laptop Satellite L350 - 10 H belongs to the series of PSLD0E.
    You can find the drivers for this laptop if you would choose L350 PSLD0E.
    Easy. Isn t it?

    Now, back to your video output;
    As far as I know there is a Mobile Intel GL960 Express Chipset.
    I have the same chipset and I can use the external monitor perfectly.
    But I installed the Intel graphics driver actually the driver preinstalled on my laptop didn t contain some resolutions
    That's why I recommend the Intel page and download and install the driver for the Mobile Intel GL960 chipset.

    After the new reboot, you should check if you can choose the resolution.

    Welcome them

  • Impossible to use the Satellite L350 recovery disk

    I bought the recovery disc for my Satellite L350-370 followed instructions beginning now stopped program to "waiting for odd vacancies" moment for this strange worked perfectly.

    Laptop only if off now and no keys work.

    Help!

    I really don't understand what is happening here. I used the disc of recovery many times and I've never seen this message.
    By default the BIOS settings and restart your laptop. When the laptop starts up and you see Toshiba welcome screen press F12 repeatedly to enter the boot menu. When the start menu is shown on the screen, place the recovery in the optical disc drive disk. After doing this choose the CD/DVD drive and press ENTER. What happens when you do this?

    ODD must begin to read the recovery disk and you should see recovery on the screen menu.

  • Cannot access my Satellite L350

    My laptop Satellite L350 is 6 months old.
    When I turned off today everything was fine but when I boot a few hours later the Toshiba name rises and LOGGING OFF words happen and that's it. Cannot access somehow. Tried to press F8, but still the LOGGING OFF.
    Any help would be greatly appreciated. I have Vista.

    It's strange, and I've never heard of this problem.
    Maybe you have a virus or something else on your computer, and it is impossible to connect to your computer.

    In your case, I'll try to reinstall Windows. You can do it with the HDDRecovery option. Press F8 before Windows starts, choose repair my computer and then you can choose the Toshiba Recovery option. Follow the instructions on the screen.

  • Cannot connect my Satellite A200 with my Headset HBH-PV708

    I have laptop Toshiba Satellite A200 with Win Vista Home Premium.

    My Blootooth recognizes and connects everything right from my mobile phone NOKIA, but NOT NOT connect my Sony Ericsson Bluetooth Headset HBH-PV708.
    Could someone help me please to solve this problem?
    I would like to use the headset with my SKYPE.

    Thank you.

    I wonder if you can connect if you enable 'link level apply secuirty... '. "in the Bluetooth Options > Security > custom level

  • Common Modules diver does not work on Satellite L350 with Win XP

    The diver of common Modules is * not working *.
    How it does not work is because when I try to install Toshiba controls it tells me that "TOSHIBA common Modules is not installed on your computer. I can go on, but it does not (obviously). I've tried versions 1.00.05, 1.00.08 (both of which are on the European driver from Toshiba site) and 1.00.22SE, 6.05.01.TE (from another site) and none of them work.

    After you have installed one of them I get this message from PowerSaver: 'TOSHIBA common Modules does not run correctly. You can use TOSHIBA Power Saver. "A strange thing is that the driver Toshiba common Modules _doesn ' t appear in Add/Remove Programs_ and I can't find the place where to uninstall it. How I installed other versions is simply their execution.

    My laptop is a Satellite L350 PSLD0C-03N08C (http://www.toshiba.ca/web/product.grp?lg=en§ion=1&group=1&product=8193&p = 8282 #spectop art).
    Toshiba Canada site has only the drivers Vista (VAP). All the drivers on Toshiba Europe site worked perfectly.
    * Please help me, this is the only part that is left for my downgrade.* I can't use Power Saver, the Fn keys and all these important things if I don't get fixed.

    + PS for those who are interested in a history of my downgrade problems can be found here: http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=37432+

    Hello

    As you said that it is a Canadian model of laptop and if the common Modules are not designed specifically for this laptop then this application will not work correctly.

    So, we found a reason why the joint work of modules-> this software doesn t is not designed for your notebook from the series.

    Unfortunately, if the Toshiba Canada page doesn t provide the Win XP tools and utilities for you laptop, then you must wait and must run Notepad without these tools.

    Welcome them

  • Cannot use e-gift card with a quote

    Hey guys!

    I have some major problems with a purchase. Thursday (four days ago), I got a quote for a chat for 13 Chromebook sales representative. I couldn't buy then because I had to wait until my gift cards has consolidated. (None of them are promo gift cards.) Today, I checked and gift cards have been consolidated (yay!), so I looked to the top of the quote to complete the purchase. He had nowhere to enter the gift card and apply it towards balance. The only mention of gift cards, I could find was in relationship with (and with) a financing statement. I didn't sign up for an account, but the word "gift" is not even on other pages until the final payment button.

    I spoke with someone in the chat, and he said to select "Gift card" payment type drop down. There is no such don't fall down I can find. The payment page has text links for the different forms of payment that each have their own page. I tried selecting the option 'Pay with two credit cards', but the card does not appear as an option of credit card here.

    then... How can I request a gift card to my balance? I am unable to use a gift card with a quote? Or do I wonder funding to use a gift card?

    Thanks for any help you can provide!

    Thanks for the reply, Lorna. In fact, I was able to get back in touch with the sales team and make the purchase by phone with no problems. Don't know what was going on with the purchase online, but the problem was solved in another way.

  • Cannot use MemoryStick pro duo with Satellite M35x

    Hello

    I can't insert a "memory stick pro duo" card of a digital camera in my Toshiba Satellite m35x.

    Single stick memory slips inside the slot "bridge media" and does not lock at all (I used actually curved tweezers to extract it back).

    It seems that the 'bridge of the media' slot is too large for the memory card.

    I read the user guide and the procedure seems simple.

    What evil?

    I think the question is:

    Is the Satellite M35X supports the memory stick pro duo?

    I put t think so buddy.

    Check your user manual that must be preinstalled on your laptop to make sure which cards are compatible with one whose cards are not supported!

    If the memory stick duo pro is not supported by the internal card slot then you should choose an external external solution as a USB card reader.

    Good bye

  • Cannot use Bluetooth USB Dongle with Satellite P100

    A few months ago, I bought a dongle Bluetooth USB of Marks & Spencers. He says it's a Bluetooth 2 product. When I put the dongle into the USB port I can see no problem with drivers & Bluetooth in my device manager but I am still not able to see Bluetooth anywhere else on the computer and my phone is unable to find t.

    I was not able to load the software which accompanies it as sound does not seem compatible with windows vista. My laptop is Satellite P100 - 160.

    Can someone please tell me what I am doing wrong & what do?

    Thank you.

    You must have at least version 5 of the Bluetooth stack in oder to use it with Vista. Please check your site to sellers of laptop computer for her.

  • Cannot use my shure pg58 with hearing cs6?

    I started the test today and I plugged in my microphone and tried to save, it indicates the frequency of sampling of the output devices and audio do not match. Audio cannot be recorded until this problem is corrected. Use the appropriate operating system or control panel of audio device to adjust the frequency of sampling of the input devices and outpute to use the same settings. Ive tried to change the sampling frequency that it does not help.

    Looks like you are using Windows 7 (or Windows Vista) and Ms. Audition default driver type.  Hearing will not be able to save when Windows is configured with different sampling frequencies for playback and recording.  It is not too difficult difficulty however.

    1. oh no!  Cannot save an audition due to sampling rates do not match!

    2 okay, let's do what she suggested and ensure that our registration (entry) and correspond to frequencies of sampling (output) reading.  First, right click on the speaker icon near the Windows clock in your system tray and choose "recorders".

    3. Select the input channel that you want to use for recording.  Right-click on it and select "Properties".  (You can also just click normally to select and click on the big button Properties, but who did not have a convincing screenshot).

    4. click on the tab advanced, then select your desired sampling frequency from the list.  44 100 Hz or 48 000 Hz are the most common formats.  If you are unsure you need, I'd recommend selecting 44 100.  In both cases, click OK several times to close out of here and do not forget that you selected because...

    5. you will now repeat steps 2 through 4, but this time select playback devices in the menu speaker icon.  Right click on the preferred output channel and choose Properties, then Advanced and set the sampling frequency to match your recording device.

    6. Finally, click OK to save the settings and close the menus.  At the hearing, select Edit > preferences > Audio hardware and set the sampling rate here option to match.

    You should now be able to save!

  • Cannot use AVG safe search with version 6 and needs which fixed until I use version 6

    I have a paid AVG application that uses AVG safe search. I need this so I can't use firefox 6 because it which turns off. In addition, my pc seems slow when I tried to use version 6. I don't have a real problem with version 5! I'm forced to use the five version up to what firefox 6 can allow me to use my AVG! I don't want to force firefox to activate AVG either, because that could cause real problems. This info should be resolved by the developers!

    http://forums.Avg.com/us-en/AVG-Free-Forum?sec=thread & Act = Show & ID = 171434

    Safe Search extension is not compatible with Firefox 6.0
    

    Mozilla has released their new browser Firefox 6.0 for the public. Unfortunately, the AVG Safe Search extension is not compatible with this version of browser yet (example screenshot). We found a few glitches in our internal tests and the developers are working on their rectification. A new update of the AVG program will be released soon support fully implemented. You may also notice that some other Firefox extensions are not compatible, as the cycle of development of Firefox is very rapid.

    Please rest assured you are still protected by AVG even if you have already upgraded to Firefox 6.0. The AVG Active Surf Shield component is still checking all data and will prevent you from accessing malicious content even though search results verdict icons are not available temporarily.
    
  • How to use the Satellite P100 with MS Vista and MS Bluetooth stack?

    I use my P100 Sat for more than a year. I just reinstalled Windows Vista Ultimate from zero, and because I'm really not so satisfied Bluetooth Toshiba stack, I try to use the battery Bluetooth Microsoft original, which comes with panoramas.

    After reinstall, Windows found BT device and installed MS BT stack. Everything worked well, but ufetr downloaded and installed tons of updates SP1 included, peripheral BT disappeared completely. I found a few articles on how to Toshiba battery BT from Microsoft, but it seems to be a collaborative XP and above all he always need to install "Bluetooth Monitor for MS Stack", but I cannout find this download to MS VIsta.

    Can anyone help? Thank you!

    Great!

  • Cannot use the NOR-IMAQdx with 3 USB camera driver

    I have a system WIN7 64-bit I would use with two USB 3 Vision cameras (both are 24UJ003 from The Imaging Source DFK), which works very well with the software IC software. The camera can be opened with IC software but will be visible only with a cadence of 1fps, any size I put it.

    I can open them able and Automation Explorer, but they do not appear under NOR-IMAQdx in the tree.  When I click on the software in MAX tree below, NOR-IMAQdx revealed as being installed (14.5). The camera (and OR) instructions say change the camera driver to that found in C:\Program NIUninstaller Instruments\NI - IMAQdx\Staging\NI USB3 Vision, but my driver is located in C:\Program Files (x 86) \National Instruments\NI - IMAQdx\Staging\NI USB3 Vision.

    Attempts to install the driver displays the following message is displayed:

    "The folder you specified contains a compatible software driver for your device.  If the folder contains a driver, make sure that it is designed to work with Windows for x 64 systems".

    This makes it sound like the driver is in the wrong place or it does not for a 64 bit OS.  Any advice on how to switch them TIS drivers to drivers OR-IMAQdx and also how increase the pace of the second camera would be very much appreciated.

    I tried to connect the cameras individually, and they both have the same performance as when they are connected together (we have good pace, and the other has only 1 fps).

    Are you sure that the camera is Vision compatible USB3? Nothing that I do not see in the marketing material says it is compatible. Is it possible you need a firmware update to make it compatible?

    The installer put IMAQdx driver in the space provided for an x 64 system and he always puts the number of correct bits of the driver down to the system that you have installed. My hunch is that the camera is not to expose a USB3 Vision interface for the driver to bind.

  • Cannot use the Exteranl USB with Windows 7 floppy drive

    I have a removable disk drive 3.5 inch USB connected to my computer running Windows 7.  When I plugged it there was the usual beep that had plugged in an external drive and only came a message that the drivers were installed correctly and the drive is ready for use.  However:

    a. the player is not visible in Explorer, but appears in the Disk Manager and control panel (material & sound-devices and printers).  It "works" according to Disk Manager.

    b. when I insert a floppy disk, nothing does not appear in the Explorer

    c. I tried without success drive letter assignment (miss me something here, I think and need for a better prescription to follow)

    I saw a post elsewhere on the "group policy objectives" but got lost in the talk of technology and could not get something resembling the description in the post.

    Suggestions, please, which will help to get the job of the thing.

    Hello

    Thanks for posting your query on the Microsoft Community.

    With the description, I understand that you can not use the floppy drive external USB on your Windows 7 computer.

    I would be grateful if you could help me with more information to better understand the problem and a solution:

    1. have you tried another USB port using the USB floppy? If this isn't the case, I suggest you try to use it in another port.

    2 have you tried to use the USB port on a different computer/machine? If not, try to use it in another computer.

    This problem can occur because of incorrect settings. In order to solve the problem, I would suggest trying the following methods and check if this is useful:

    Method 1 : Troubleshooting hardware and peripheral

    Integrated the hardware and devices troubleshooter can automatically detect and fix most of the incorrect settings and errors that could cause problems with the equipment. I suggest you run the troubleshooter to check if there is no problem with the graphics card. See albums as follows:

    1. open Control Panel

    2. click Troubleshooting and select the option to display all on the left pane.

    3. click Troubleshooting of hardware and devices and follow the prompts.

    Try Method 2, if the problem persists

    Method 2 : Install the drivers in Compatibility Mode

    I suggest that you try to download the drivers from floppy drive designed for Windows XP or Vista and then install it in compatibility mode.

    Make older programs in this version of Windows

    http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

    Hope this information is useful. Please come back to write to us if you need more help, we will be happy to help you.

Maybe you are looking for