Cannot use recovery DVD with my Satellite Pro A300D

When I arrived at my laptop set up the way I like it, and I created a recovery disk which took the 2 DVD s.
Then Vista started to slow down a lot so I decided to use the disc and everything started to go well then he asked for two drive and it came with an error message saying that the file was missing to complete the Setup program couldn't t.

So now I can t get in the menu to restore it to the State when I had and the disks that I don t work.
Any help is appreciated.

Thanks in advance

Hello buddy

It is badly located now. Please try to do it once more.
If the same thing happen there is nothing you can do. I'm not an expert for this kind of thing, but I noticed the image recovery recovery DVD will be copied to the HARD second partition disk) first and then the installation of recovery will go from there.

If the adaptation procedure is not done on the recovery of end procedure cannot be started.
Sorry buddy. In my opinion, you can try to contact the nearest authorized maintainer and explain the situation. Take the DVD created as evidence and maybe they will order new media for free.

Good luck!

Tags: Toshiba

Similar Questions

  • Cannot use wireless LAN with my Satellite Pro A100

    Toshiba Satellite Pro A100-830
    NETGEAR DG834G

    Can not use the Wi - Fi connection. When you use "Free Config" to find peripheral wireless the popup "this connection is controlled by other software. I don't know what that means and what software controls the connection. I have other laptop which is duly connected by wireless. I'm ok with wired connection.

    I don't know much about the technical aspects and therefore ask for help so any reader can.
    Thank you
    Kris

    > Can't use the Wi - Fi connection. When you use "Free Config" to find peripheral wireless the popup "this connection is controlled by other software.

    You may not use the ConfigFree for configuring Wlan but own Vista configuration options or the WLan configuration tool like Atheros Clint Utility or Intel ProSet utility. It depends on the WLan card which utility can be used.
    Card Intel-> Intel ProSet utility; Card Atheros WLan-> Atheros Clint Utility

    I guess the message + this connection is controlled by other software + appears because one of the above options controls the WLan.

  • Re: How to use Recovery Expert Mode in Satellite Pro M70-220 product recovery CD

    I would appreciate advice on the following points.

    My Satellite Pro M70-220 (PSM75E-00D008G3), portable computer has 4 partitions created by Acronis Disk Director costume v9:

    C: OS - Win XP Pro SP3
    D: programs
    E: data & downloads
    F: backups

    After you start the laptop in Win XP, I inserted the recovery CD Toshiba in the DVD - RAM drive
    and sailed to the BMP file, R:\G_INST\BMP, where I found the file "menu.bmp", which gives 2 recovery
    Options:

    * 1. Retrieve entire hard drive *.
    Caveat. All data stored o your computer will be lost.
    Preinstalled software factory will be installed.

    * 2. Recovery expert Mode WARNING: *.
    This is for PC experts only.
    Preinstalled software factory can be installed on an existing partition.

    My questions are linked using the "Recovery Expert" Mode:
    -I'll be able to use the "recovery of the Expert Mode' the recovery CD to reinstall Win XP Pro (pre-installed software factory) on my C: partition, while affecting only not partitions D, E & F?
    -I'll be able to format the C: partition by using the "Expert recovery" Mode, without formatting of other partitions?
    -What is the exact procedure of "Expert Recovery Mode"?
    -where can I find more information on the procedure of "Expert Recovery Mode"?

    Thank you

    AlanCB

    > I'll be able to use the "recovery of the Expert Mode' the recovery CD to reinstall Win XP Pro (pre-installed software factory) on my C: partition, while affecting only not partitions D, E & F

    Yes, this should be possible. Using the Expert Mode of recovery, you should get the ghost window where you can select the partition where the OS is to be installed. In this case only that partition would be formatted.

    > will it be possible to format the C: partition by using the "Expert recovery" Mode, without formatting of other partitions?

    Yes, theoretically it should be possible.

    > what is the exact procedure of "Expert Mode of recovery"?
    As I mentioned above, this mode allows you to restore the operating system on a partition of some and only this partition will be formatted.

    > where can I find more information on the procedure of "Expert Mode of recovery"?
    What looking here in the forum?
    I found this thread:
    http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=7302ᲆ

  • Cannot use the webcam on my Satellite Pro A200

    I have the Satellite Pro A200 series.

    My warranty (with clips) runs out on August 7. I had probs with my webcam since I bought this laptop two years ago. I keep says it's a matter of 'software' and not covered by the warranty. I did everything what I said to do... reformatted the hard drive three times, etc., etc. In any case... I use only this laptop when I go... I checked the other day and that's the problem, now, I recovered it. It works, I can see on the webcam, but no one can see me.

    I get this message that says "turn on camera"... but there is no way to turn it on and just what I do does not work. Is it not now a HARDWARE problem, with a built-in webcam If the camera does not illuminate? So it seems Staples should look like it. I'm back this week for another chance with them.

    But does anyone have any suggestions?
    Thank you.

    Try this

    * Download driver Chicony Webcam drivers from Toshiba Web site section was updated. If you can't find an updated driver, try a new driver of another model of Toshiba.
    * Install the Service Pack 1 of Vista, or Vista Hotfix KB934374: http://support.microsoft.com/kb/934374 (KB934374 is included in SP1)
    * Update your e-mail software (MSN/Yahoo Messenger, etc...)
    * If you have another program that can use the webcam (e.g. Skype), make sure that they are completely closed and not, sitting in the system tray.
    * Try to close the bar Assistant camera on the left side of the office.
    * To stop the Camera Assistant software from running at startup, run Regedit and delete HKLM\Software\Microsoft\Windows\CurrentVersion\Run "Camera Assistant Software".

    If it still does not work, then get an ASP to fix it.

  • A9P58UA #ABA: cannot use recovery DVD in the DVD player laptop external Envy 15-3033 CL

    I had to replace the hard drive of the laptop. A directed recovery DVD from HP. The internal DVD did not work, so I'm an external LG DVD player, model GP50NB40. I put the boot order in the BIOS to USB CD/DVD. However, the laptop does not recognize the DVD in the drive. I get a message this is something to the extent of the 'no disk bootable found '. I also hit F9 and selected the external drive to boot from without success. And for some reason, I also hit F11. Same message.

    I tested the DVD drive on another computer and it works fine. I changed the USB cable on the laptop to another port. No change. Does anyone have an idea how to proceed to load the software on the new drive? Thank you in advace for your time.

    Hello:

    I see that your laptop has 2 USB3 ports and 1 USB2 port specifications.

    http://support.HP.com/us-en/product/HP-envy-15-notebook-PC-series/5186791/model/5223304/document/c03151875/

    You need to boot from the USB 2 port.

    It would be the only suggestion I can offer.

  • Re: Cannot use remote control with my Satellite P20

    I just got hold of a PSP20E and the remote control (2 of them) does not work, the light blinks but that's all. When I try to set up in the Media Center settings, I get the message unable to detect the remote sensor.

    I was told by the previous owner it was working, the only thing I've done is to adapt to a new DVD (TEAC DV-W28E) player and loads of recommended Windows updates. The BIOS version is 1.6 and I'm under Win XP MCE (sp2). Any ideas would be welcome.
    Either by the way, I write a BIOS updated on a CD, or do I have to buy a floppy drive?

    Hello, Alan

    I used Satellite P20 over 2 years and I never noticed any problem with the small remote control. I guess you bought second-hand laptop and in my opinion, the first things you need to do is install the OS via recovery CD.

    When the laptop to factory settings, you must test the operation of the equipment, in particular the use remote control. Recovery image is designed so that everything should work. If this isn't the case, it may be just because of a malfunction of the equipment. As I've already said I used this laptop long enough and never noticed any problems.

    To be honest I didn t make updates because the BONE was very well set up. As I said, you can test it with recovery image.

    The BIOS update you need floppy drive.

  • Cannot use Recovery for my laptop Satellite A series

    Hello

    I have a series of satellites A. Recently, it started to freeze on the boot process and I could get in mode Safe Mode command.
    Now, I can't even reach that point.

    When I get the F8, the only options I get are Startup Repair which freezes and on normal startup, I get an unmountable volume error.
    I tried to last good Config known with no luck. Memory Diags reveal no error.

    Now, when I use the drive recovery process begins very well, gets past step "Windows loading files. No scrolling screen of the Microsoft logo.
    When I get to the dark blank screen with arrow, he never leaves the screen and moves to the next step.
    How long should I wait to reach the next screen or not?

    Now, I understand that it is possible to boot and do Startup Repair starting from a Vista DVD.
    Where to get or make one of these? I use a desktop Windows 98 computer to submit this.

    At the very least, how do my files to be able to save them in case I need to reinstall Vista?

    All advice appreciated!

    George

    To me, it sounds like a defective HARD drive, maybe. You said that you have tested the RAM, what program did you use?
    I can recommend Memtest86 and HARD drive, you should test using the fitness Test drive as Akuma said. I have good experiences with these two test tools.

    For the moment, you can back up your files if you put the HARD drive into an external HARD drive enclosure. I put t know what Satellite phone you have exactly, but the external HARD disk enclosure must have a SATA or IDE connector and should be compatible laptop HDD s (2.5).
    Then you can save your files to another laptop or PC.

  • Re: Using Recovery Disk with portable Satellite

    This laptop seems to have a virus that passes without being detected by Windows Defender and Avast.
    After about 10 minutes, everything slows down, and sometimes the screen turns off. Sometimes it takes 10 minutes to make something happen.

    So I figure it of time to use the recovery discs that I did when I bought the computer - about a year ago. I thought that by putting the recovery drive #1 DVD in the drive and reboot it would start automatically (Windows Vista). But nothing happens. So, how can I reload the operating system from the recovery disk?

    Best Buy wants $200 to do, but I would do it myself. Help!

    Hello

    It is easy to do:

    Start your laptop and press the F12 key repeatedly Boot Menu will appear
    Put recovery media in the optical disc drive
    With the help of the arrows (UP/DOWN) select the CD-ROM drive, and then press ENTER
    Installation will start and please just follow the menu on the screen.

    Please let us know if everything was OK.

  • Cannot use Recovery CD XP for Satellite M70 168

    Hello

    I can't install XP Home with Toshiba Recovery CD for my m70-168.
    I did two years ago, but now it is impossible.

    I followed the instructions of the user manual. Initially, the system displays the loaded modules followed by a recovery utility menu
    There are 3 options 1-Normal 2 - custom installation - 9 altogether. But it is impossible to select one of them.
    CTRL-Alt-Del works only, then windows starts normally. Since the last restoration, memory has been upgrded to 2 GB.

    I have the same problem using my restore CD backup copy.

    Thanks for your help
    Pierre46

    Hello

    Hmm sounds really weird I mean if the copy of the recovery disk is not working too, I doubt that this could be a problem of recovery disk. But nothing is impossible
    Are you sure that your HARD drive is completely OK?

    Have you tried to install Win XP using the Microsoft CD clean Windows XP?
    Maybe you should check to ensure that the problem is not related to floppy disks to install.

    Return to your recovery disk; As far as I know it of not possible to order a new recovery disk because this laptop model is discontinued
    So you will need to use a disc of Microsoft

  • Cannot use option watch on my Satellite Pro P200

    Hello

    I installed XP SP2 on my P200, but he can't go to sleep mode, it says something about a control of parity RAM or something?
    What can be wrong?

    Standby under Vista works fine.

    * Bad operation of the equipment *.
    * Call your provider of equipment for the support
    * nmi: parity check / memory parity error *.
    * The system stopped *.

    Have you updated BIOS version taken WXP supported (5.20)?
    You have installed all the drivers for Windows XP Home edition?

    When you go to START > Shut down option the Standby button is dimmed?
    Explain how you try to use turn on watch and what exactly happens?

  • Cannot use recovery media - bad machine - Satellite A55-S106

    Hello

    My laptop recently got the blue screen of death and had to reformat my laptop. I jumped the drive and much to my surprise he told me bad machine
    even if it's the drive that came with it when I bought it. Now I don't know what to do any suggestions?

    As said by Feliks, look on the Toshiba site.

    In this bulletin to support there is a solution for this problem. You must restore the credentials of your model (DMI channels) so you can restore the factory software.

  • Which WLan router would be compatible with the Satellite Pro A300D-13th

    I'm really new to laptops and I hope this isn't an issue as fundamental, but I'm looking for a router for my A300D-13th. I see a lot of posts on the forums about the problems with broadband so many different routers, I just thought that some knowledgeable forum members could point me in the right direction please.
    I use ADSL Max.

    Hello

    I don t think that a Satellite A300D would not support some routers high-speed WLan.
    The point is that the laptop uses the latest generation of internal WLan cards which should be compatible with most of the WLan routers.

    Sometimes the WLan driver needs to be updated to get all the features, but to be honest I have never had problems with WiFi

    Of course, if the wireless network card does not support 802. 11 G, then you will not be able to connect to this wireless network

  • Is it possible to use the port replicator with the Satellite Pro series?

    Hello
    Is it possible to use the port replicator (Docking Stations) for Tecra series laptop with the Satellite Pro series?

    Hello

    No, as far as I know it of not possible to use a port on laptops Satellite Pro Replicator.
    All laptops that support the Port Replicator has a port extension at the bottom of the unit.
    To my knowledge, the Satellite Pro series don t have this port.
    For now only the Tecra and some units Protégé(ie: S100) supports this feature.

  • Creation of recovery disks on a Satellite Pro L300 running XP pro

    Hello

    you want to create a recovery disc for my Satellite Pro L300. Operating manual provides instructions for Vista but the machine comes with XP Pro.

    Can anyone help?

    Can you please send the exact model number? I just want to check the specification.

    Anyway, as far as I know this model was supplied with preinstalled VISTA 32 bit BUSINESS and WXP recovery DVD. You always have this DVD?

    I m not 100% sure, but I think that WXP had no option for recovery disk creator. The whole story started with Vista.

  • Satellite Pro A300D - error during DVD playback

    Hello

    I have a problem with my satellite Pro A300-140 under Vista 32 - bit OS

    Whenever I try to watch a DVD I get an error message "unable to output the video to an external device. Please check the external output setting after the end of the application "-I don't mean to connect what - I want to just watch a movie!

    Ideas - I've read, it's a known issue, but I can not re - find information?

    Thank you

    Hello

    I don't know what the problem with your Dvd Player, try to open with Power Dvd, you can download

    http://www.CyberLink.com/products/PowerDVD/overview_en_US.html

    Just to check if it is software issue
    Welcome them

    Post edited by: Jeka-HE

Maybe you are looking for

  • I have no fonts I have Web pages

    Hello any site looking to open is displayed in the same way.screen: https://drive.google.com/file/d/0BwWPAhs9kUZkQkh0QWZuRjJ2bU0/view?usp=sharing I already reinstall FF, the problem occurs on more than one profile. IE and chrome sites look properly

  • Iconia W700 stuck on 0, 77GHz on battery after update 8.1

    After you have installed the Windows Update yesterday 8.1, the processor of my W700 gets stuck on 0, 77GHz that unplugged while. When I plug in the processor "wake up" and hits 2, 65GHz again. I tried on the mode performance, balanced and be able to

  • 15 - G207 ax: driver problem

    Name of device network controller         Hardware ID: PCI\VEN_14E4 & DEV_4365 & SUBSYS_2230103C & REV_01PCI\VEN_14E4 & DEV_4365 & CC_028000PCI\VEN_14E4 & DEV_4365 & CC_0280 Compatible IDS:PCI\VEN_14E4 & DEV_4365 & REV_01PCI\VEN_14E4 & DEV_4365PCI\VE

  • Want to extend my C: drive

    Dear Sir I tried to expand my C: drive through computer management and 3rd third-party tool, but both ways, that I could not succeed. The problem is that the Option expand volume became inactive (off). detailed below is the screenshot. Please help me

  • HTTP on ACS server

    Hello I installed a Cisco ACS server. I am able to use the "remote desktop" to http to the server, however, what can I do if I wanted http in the application of GBA directly? Rgds