Cannot use Recovery for my laptop Satellite A series
Hello
I have a series of satellites A. Recently, it started to freeze on the boot process and I could get in mode Safe Mode command.
Now, I can't even reach that point.
When I get the F8, the only options I get are Startup Repair which freezes and on normal startup, I get an unmountable volume error.
I tried to last good Config known with no luck. Memory Diags reveal no error.
Now, when I use the drive recovery process begins very well, gets past step "Windows loading files. No scrolling screen of the Microsoft logo.
When I get to the dark blank screen with arrow, he never leaves the screen and moves to the next step.
How long should I wait to reach the next screen or not?
Now, I understand that it is possible to boot and do Startup Repair starting from a Vista DVD.
Where to get or make one of these? I use a desktop Windows 98 computer to submit this.
At the very least, how do my files to be able to save them in case I need to reinstall Vista?
All advice appreciated!
George
To me, it sounds like a defective HARD drive, maybe. You said that you have tested the RAM, what program did you use?
I can recommend Memtest86 and HARD drive, you should test using the fitness Test drive as Akuma said. I have good experiences with these two test tools.
For the moment, you can back up your files if you put the HARD drive into an external HARD drive enclosure. I put t know what Satellite phone you have exactly, but the external HARD disk enclosure must have a SATA or IDE connector and should be compatible laptop HDD s (2.5).
Then you can save your files to another laptop or PC.
Tags: Toshiba
Similar Questions
-
Cannot use recovery DVD with my Satellite Pro A300D
When I arrived at my laptop set up the way I like it, and I created a recovery disk which took the 2 DVD s.
Then Vista started to slow down a lot so I decided to use the disc and everything started to go well then he asked for two drive and it came with an error message saying that the file was missing to complete the Setup program couldn't t.So now I can t get in the menu to restore it to the State when I had and the disks that I don t work.
Any help is appreciated.Thanks in advance
Hello buddy
It is badly located now. Please try to do it once more.
If the same thing happen there is nothing you can do. I'm not an expert for this kind of thing, but I noticed the image recovery recovery DVD will be copied to the HARD second partition disk) first and then the installation of recovery will go from there.If the adaptation procedure is not done on the recovery of end procedure cannot be started.
Sorry buddy. In my opinion, you can try to contact the nearest authorized maintainer and explain the situation. Take the DVD created as evidence and maybe they will order new media for free.Good luck!
-
Cannot use recovery media - bad machine - Satellite A55-S106
Hello
My laptop recently got the blue screen of death and had to reformat my laptop. I jumped the drive and much to my surprise he told me bad machine
even if it's the drive that came with it when I bought it. Now I don't know what to do any suggestions?As said by Feliks, look on the Toshiba site.
In this bulletin to support there is a solution for this problem. You must restore the credentials of your model (DMI channels) so you can restore the factory software.
-
I forgot my PIN for my iPhone and cannot use recovery mode because my sleep button is blocked. A certain predicamnet ik
Only thing you can do is to let die and then hold the home button when you plug it into your computer to put it in recovery mode.
Actually if the phone is on and that you have an icloud account, you can delete it at distance of icloud.com
Go to find my iphone and erase the phone.
-
Need driver graphics card for my laptop Satellite Pro 4310 W2K
Hello
I'm looking for a graphics card driver for my laptop Satellite Pro 4310.
I need a driver for Windows 2000.In the Toshiba download area that I can't find a driver for the 4300 series? There are only the names of laptops as A / S / P / series U and so on. 4300!!!
I know that the laptop has the S3 Savage/IX card inside.Is someone can help me?
THX...
Best regards
ThomasHave you checked also option ARCHIVE in type of product?
-
My acrobat 8 is recorded for a computer that has been hacked and is fried, but I can't reg to this computer and now I cannot use it for 30 days on this computer
Serial number and activation support (no-Cloud) https://forums.adobe.com/thread/2041990 to adjust the number of activations
-
I know that I get 2 downloads. I have one on my Mac. Can I use one for my laptop?
Hello david,.
That is right. Cloud software can be installed on Mac or Windows for no extra cost. No platform swap process is necessary.
On the Mac log you just to creative.adobe.com with your Adobe ID and download the software. Same thing as you did on the PC.
Hans-Günter
-
ORA-01552: cannot use rollback for non-system tablespace system segment
I'm getting following error, according to a previous thread under request.
ORA-01552: cannot use rollback for non-system tablespace system segment
How can I get them online, I can get them online does this error?select SEGMENT_NAME, TABLESPACE_NAME, INITIAL_EXTENT,STATUS
from dba_rollback_segs SEGMENT_NAME TABLESPACE_NAME INITIAL_EXTENT STATUS ------------------------------ ------------------------------ ---------------------- ---------------- SYSTEM SYSTEM 114688 ONLINE _SYSSMU1$ UNDO_TS 131072 OFFLINE _SYSSMU2$ UNDO_TS 131072 OFFLINE _SYSSMU3$ UNDO_TS 131072 OFFLINE _SYSSMU4$ UNDO_TS 131072 OFFLINE _SYSSMU5$ UNDO_TS 131072 OFFLINE _SYSSMU6$ UNDO_TS 131072 OFFLINE _SYSSMU7$ UNDO_TS 131072 OFFLINE _SYSSMU8$ UNDO_TS 131072 OFFLINE _SYSSMU9$ UNDO_TS 131072 OFFLINE _SYSSMU10$ UNDO_TS 131072 OFFLINE _SYSSMU11$ UNDO_TS 131072 OFFLINE _SYSSMU12$ UNDO_TS 131072 OFFLINE _SYSSMU13$ UNDO_TS 131072 OFFLINE _SYSSMU14$ UNDO_TS 131072 OFFLINE 15 rows selectedMaybe you should also mention that you make no effort to look for the error in the documentation online or anywhere else.
You get this when your database uses rollback segments, and you have spaces of multiple tables.
To be able to create spaces of multiple tables, you must first create a rollback segment in the system tablespace.That's why you get the error.
The resolution is clear.Unfortunately, 99.9 percent of all the people posting here refused to make any effort to resolve errors.
-----------
Sybrand Bakker
Senior Oracle DBA -
cannot use ASM for database storage.
Hi all
I use oracle linux 5.4
and 11g R2 grid
But while using DBCA to configure the database
but when I select the type of Storage Management (ASM) of automatic storage
while I can remember disk group has been given
When I use data then he gave me the following error.
cannot use ASM for storage of the database for the following reason
No found DISKGROUP.
Please help me thanks in advance.See the link: -.
DBCA could not detect diskgroup
Thread: DBCA could not detect diskgroup -
Satellite A300D - cannot use recovery media
Hello!
This is what happens...
I ordered a few days ago a media recovery disk, I put in a laptop and... Start step by step and after the recovery then this is the watch to the top:Image for Windows tool
Progress: 100%
Image applied successfully
Unzip the Vista operating system
L ' ImageX for Windows tool
Copyright...PROGRESS: 2% 12:37 minutes
[Warning] C:\Program 8.0\Reader\vdk150.dll Adobe. [Unzip the file:-> file corrupted block at offset 01C8A49F] [Retry] Restoring to new Adobe C:\Program 8.0\Reader\vdk150.dll...
[Warning] C:\Program 8.0\Reader\vdk150.dll Adobe. [Unzip the file:
-> file corrupted block at offset 01C8A49F] [Retry] Restoring to new Adobe C:\Program 8.0\Reader\vdk150.dll...
[Warning] C:\Program 8.0\Reader\vdk150.dll Adobe. [Unzip the file:
-> file corrupted block at offset 01C8A49F] [Retry] Restoring to new Adobe C:\Program 8.0\Reader\vdk150.dll...
[Warning] C:\Program 8.0\Reader\vdk150.dll Adobe. [Unzip the file:
-> file corrupted block at offset 01C8A49F] [Retry] Restoring to new Adobe C:\Program 8.0\Reader\vdk150.dll...
[Error: 1392] C:\Program 8.0\Reader\vdk150.dll Adobe
Error restoring image
The file or directory is corrupted and unreadable
ImageX error: could not get Visa V:\HDDRecvery\SwImgz06819XPS.swm Index 2 hard drive C:!
Press a key to continue...
And when I tray to do his show once again the same massage but with different files!
CAN YOU HELP ME, PLEASE! because I have no idea what to do now
Thank you.
Hello
If you cannot use this contact Arvato to order it, explain the situation and ask if you can get a new one. I can't say for sure what the problem is, but I can imagine that this recovery disk is troublemaker.
What else can be? HARD DRIVE? I don t think so.
-
How to get the Recovery DVD for my laptop satellite?
Hello.
I just bought a Toshiba Satellite P105 2nd hand (but still under warranty) but the seller did not have the recovery DVD. How can I get a new game?
Thank you
JM
Hi, JM
Try contacting the partner of service authorized in your country. as far as I know, they should be able to order the DVD of recovery for you.
-
How do I create using recovery disc installed Vista - Satellite L300-190
Can u please help me.
If I had the factory installed default windows vista, then how to create the recovery disk and can also create usb recovery drive, while I was able to boot my system with usb?And also if I m even have another model of machine, then I can use the recovery disk in the other machine with the same model and OS. ???
as for now, I have two same machines toshiba Satellite L300-190 model.Waiting for your response.
I think that this has been discussed much time here in the forum.
You can create the recovery disk using the Toshiba recovery disc creator!
This tool must be preinstalled on your laptop if the laptop was equipped with HARD drive recovery option.You can also try to restore the laptop using the recovery of HARD drive option.
You must press the F8 key during switching on laptop and I then have to choose the option called fix my computer. Then new window should open, and you could choose the Toshiba recovery.If you cannot use the two procedures (disk recovery HARD and Toshibas recovery disk) then you can order the new CD from here:
https://backupmedia.Toshiba.EU/landing.aspxAll that s
-
Re: Lack of Win7 drivers for my laptop Satellite
Hello
I bought a Satellite with Windows 8, but when I installed Windows 7 so I can't have a Wi - Fi.
I went to the Manager of periferics and saw this USB bus controller and SM bus controller network controller are not installedI can't find them in the download page of resources for this laptop.
Where can I find these drivers?
Thank you
Not all phones come pre-installed with Win8 or Win8.1 are supported for Win7. I m wondering really you did not check this until you have made the decision to remove the preinstalled OS.
I just hope that you created the recovery DVD or USB media that you can use for the installation of original recovery image.I put t know what model do you have exactly, but did you check the download page for Toshiba under http://www.toshiba.eu/innovation/download_drivers_bios.jsp?
-
Need WLAN drivers for my laptop Satellite Pro PSM76E
I installed all the drivers on the Toshiba site, one at a time, and none of them does not seem to work wireless.
Can anyone recommend which driver is the best for this laptop?Thank you very much
Hello!
> none of them does not seem to work wireless.
What do you mean with that?
The wireless network card is properly recognized in Device Manager?Download the latest drivers on the site posted by sanremo.
Make sure that the WLAN is enabled using FN + F8 and the WLAN switch on the laptop.Good bye
-
Cannot find drivers for my laptop
I can't find drivers for my laptop which is "15-r022TX HP laptop (4th Gen Ci5 / 8 GB/1 TB / Free BACK / graphic 2 GB) (J6M27PA) (SParkling Black) ''." I bouught this portal "flipkart. I need drivers 64-bit windows 8.1.
Thank you
mssm
Try:
http://US.download.NVIDIA.com/Windows/337.88/337.88-Notebook-WIN8-Win7-64bit-international-WHQL.exe
If do not run SlimDrivers
Maybe you are looking for
-
Cannot create new rules of filtering in 64-bit version of Thunderbird (aka daily)
Good day to you all,. I am running Windows 7 (64-bit) and I downloaded, installed the 64-bit version of Thunderbird (or in my case: every day). I have all my (three) user profiles works very well, and the daily program seems to work as if I was using
-
NB 305-108-player flash 8 GB USB is not recognized correctly
Hello. I inserted a formatted 8 GB flash drive to make a return to the top and the utility keeps saying "put an at least 5.7 GB flash drive in the USB drive" and refuses to recognize.Any ideas? TKS
-
Hello I was wondering if GPIB NOR to ACR USB cable be used to control the instruments of Agilent. I tried 3 different instruments of Agilent and it doesn't work. The cable works for all the other instruments that we have. Thanks for your help
-
(Multi ^ n) draw graphs of waveform
I'm using LabView 8.2 and I need a graph of waveforms non-sinusoidales twenty bunk on this one (actually two waveforms taken ten times each, so - what counts, but no, I can't just average to them). With the help of table build to make a standard mul
-
restart of the 260 on disconnect
I hope that's not a position to repeat, as I looked through a lot for my problem. It's here. I only got it a few days. I have, it's like a refurb by Buy.com. However I am sure it is a refurb is the problem. The first day it was working fine. I