Cannot use the recovery CD after update BIOS on Tecra 9000.

Similar Questions

• Cannot use the recovery function after an Installalation of Windows 7

  Hello

  I installed Windows 7 on my laptop.

  HP Pavilion dv5 1110eg

  After that, I tried to remove it with the recovery tool (don't ask my why).

  But when I want to start the Recovery Manager (esc-> F11) his boot to Windows instead of the backup Partition.

  I read Acsess thrue Linux-Live DVD but I can't launch the backup Partition!

  I formatted my main partition in the hope that loads of Bios, the recovery Partition, but it didn't.

  So my mommentary Situation is:

  -No operating system

  -No Acsess to the recovery feature

  Could someone help me?

  Edit:

  I forgot to say, that I did not have a recovery CD, because I baught the laptop on E - Bay and the last owner burned one of the 2 discs already. And I had no Chance to burn the first CD...

  HRM

  Message edited by HRM on 26/09/2009 11:01

  If you still work partition recovery, try to do as the active partition, I hope it works always.

  You can search for linux or tools BACK activate or install the Win7 folder in C and then use computer management do D (recovery partition) active rebort, without pressing F11, it doesn't automatically run a system recovery.

  Choose the setting that is installed at the factory and wait until she finished. As soon as it's over, make your own recovery discs.

• Dynadock U3.0 - cannot use the Ethernet port after update 8.1 Win

  Hello world

  I use a u3.0 dock Dynadock with my Vaio PCS 13.
  I'm not able to use the Ethernet port on the Dynadock since I updated my Windows 8.1 device update 1.
  Before that everything worked well.

  I'm not able to re-install the drivers correctly (tried 7.6m0, 7.5m2). While the game driver tries to start, I get an error message, Setup is not able to put a bunch of registry (SYSTEM\CurrentControlSet\Services\DisplayLinkGA\D evice1) keys (up to 0). (Image 1)

  If I ignore these messages and do not install the driver, the Ethernet port will not installed in Device Manager. (Image 2)

  If I try to install the driver manually (DisplayLink network adapter NCM), I'll get an error message that a driver has been found but that access has been denied. (Image 3)
  I started the safe mode and could install the driver. But if I reboot in normal mode, the machine could not be started.

  I also tried to disable UAC and I am logged on as administrator 'real '.

  Please find the attached messaged (in German) error:

  [picture 1]: http://picload.org/image/lcalwop/toshiba.png
  [Picture 2]: http://picload.org/image/lcalwoc/toshiba2.png
  [Picture 3]: http://picload.org/image/lcalwlg/toshiba3.png

  BTW: If I unzip the Installer (7.6m0) and install * inf for the good Fri & dev (4503) it still does not work...

  I put t know what to do anymore...

  Hello

  After upgrade to 8.1 Windows, you should also update the software/driver Display Link
  This is very important!

  The latest version of the driver can be downloaded here:
  http://www.DisplayLink.com/support/downloads.php

  Note: the old version must be removed!

• Portege M700: Cannot use the fingerprint reader after update for Firefox 3

  Hey

  I have a Toshiba Portege M700 Tablet and with the truesuite software on a fingerprint reader and password Bank plugin.

  It's all working fine and dandy with firefox 2.
  Then last night I went and updated for firefox 3 and now I can't log in to Web sites with the fingerprint reader.

  No error messages, nothing. I can say that the truesuite or Bank password software is not detecting firefox 3. I've updated to the latest version that I could find, 2.0.2.0.

  I found this thread by telling me the process of update of firefox it breaks and I should completely uninstall and reinstall firefox, which I did.
  That didn't fix it.

  Then I completely uninstalled and reinstalled truesuite. That did not help either.
  Its still broken.

  Anyone know a workaround or a way to fix this, or should I wait and see if there is an updated version of the password database? (I find it unlikely because this isn't really a standard program)

  Hello

  I think that the new Firefox version is not fully tested and possibly it s not completely compatible with the 3rd party applications.
  I remember the same problems with older versions of firefox. Finally, it has been resolved.

  But why you don t use internet explore? As far as I know the fingerprint works without a problem

  In any case if you want to continue to use the browser firefox 3 so I think that the only solution is to wait for an update.

  Concerning

• Satellite L500 - 19 X - cannot use the recovery disk

  Well I had this phone two days ago and he used once after installing fire fox and my mobile to wide band of the driver and going to start and find it of going to happen.

  I tried SafeMode (three) and repair and all I got was a screen black with the cursor upward where it should have been a language screen (I used the recovery disc supplied with the notebook) so anyway, after finding out that I wasn't going to be able to fix it, I tried to install , but of course, this does not work, or so I put my XP 64 bit OS on and has perfectly worked, then I updated (using my own upgrade windows 7) and that works fine no problem, so I tried again with the original windows 7 comes pre-installed on the hard drive on the laptop and everything went find until she starts the installation of the driver or updates (I not 100% sure on this but it or after the installation of face recognition.

  Then it stops it of self down and boots back up to automatically restart and asking me if I want to repair due to a bad start, so I did the repair boots back to the top and still says I need to fix and can't find anything wrong and carries on in this circle.

  Now, I was told it could be the registry or there is a problem of graphics, I get pretty tired of having to install/reinstall/format this laptop.

  So if there is anyone who knows of what is wrong or what to do or whether it should be returned to fix, which will be very useful.

  I thank everyone in advance.

  Happy new year :)

  Hello

  Well, I think that it of really difficult to say what is the reason. Maybe the recovery disk is noisy or the files corrupted it.

  At the moment, I can t imagine what it s a hardware problem because other windows drive work properly.

  In your case, I would try to install Windows 7 from a Microsoft disc and then see what happens. If it works properly and that you can install all drivers & tools you need to order a new drive Toshiba Recovery directly.

  Good bye

• Cannot use the recovery on Satellite P100-227 disc

  I recently bought a laptop and decided to reset via the provided restore disc, to my surprise after having inserted the recovery disk and restart the notebook goes directly into Windows. Even if I went into the BIOS and set the CD/DVD drive as a starting point to the top, or even after pressing the F12 key.
  When the laptop is turned on the drive says that there is no data on the DVD, a double click on the DVD, it says 'insert the media into the DVD drive.

  My previous phone was a Toshiba Satellite 1900 303 and just to test and see if it was a problem with my recovery media, I've used the support of recovery on the P100 and it took me to the correct recovery screen. Then I swapped the media and used the recovery on the old 1900-303 Toshiba P100 and he returned to the correct recovery screen. This got me thinking so I tried a little more data CD / DVD and to my amazement it will read the DVD-R.

  No idea...

  Hello

  Have you tried to force startup from the DVD keeping C key after turning on the device?

• Cannot use the recovery for Satellite M45-S265 disc

  I tried using the recovery disk for M45-S265 of my granddaughter.

  According to the instructions that I'm supposed to put the DVD drive, and then turn off completely the machine. After that, restart and immediately hold down the F12 key, which should produce some sort of menu and then go through the recovery from there.

  However when I take the key F12 is pressed after the closing, nothing happens.

  So I'm looking for some real help here my friends. Thank you very much.

  Hello

  Can access you the BIOS as suggested by Feliks?
  Select this check box and set the CD/DVD player in the first position.

  Save the changes, and then attempts to boot from the disc of recovery again.

• Satellite A300-1mz I use the recovery disks after an upgrade of the HARD drive?

  I'm upgrading the disk hard of my * toshiba a300-1mz *, but I am sure that I can use the * recovery disks * marked the first boots to the l.o. (vista)

  I expect your support...
  Thank you very much...

  Hello

  Yes, you can do it!
  If the HARD drive has been recognized by the BIOS, then you should boot from the recovery disk Toshiba in order to reinstall the operating system which has been pre-installed by Toshiba.

  Welcome them

• Satellite A210 - cannot use the recovery disk - error 20-DATA-048F

  I'm going to use the cause of recovery partition does not work my windows, and whenever I do it, it comes up with an error "20-DATA-048F.

  How can I fix my computer!

  Any help would be greatly appreciated.

  Have you tried to format the HARD disk until you try to use the recovery disk?
  Sometimes, I read in the forum that this may solve the problems with the recovery disk and so you can take the Windows XP disc or another tool that is able to format the drive.

  But after that, you have the Toshiba recovery disc. You are not able to use the HARD drive recovery feature.

• Means of hard drive failure cannot use the recovery partition. Alas! recovery discs will not read!

  Hard drive decided to throw a wobbly and abandon me. I can't access the drive at all so decided to but a new and use the recovery at least discs bring the machine to its status as an out-of-box.

  That's the problem... It will not read the recovery disc. I know there is some stuff about it because I read in another machine. Until you tell me to change the DVD hardware... it reads very well all the other disks. I loaded Arcronis, as well as other system repair stuff, using the DVD Player/Recorder.

  I have a pukka Product Code for the software, Vista Home Basic. Can I get a Vista Home Basic disc and then use my key to sting?  I'm happy to pay a price, but do not want to buy at the price high. After all, I already paid for it once!

  Any help/suggestions will be much appreciated.

  Mr. Blue Screen.

  Hello

  Some manufacturers have more available Vista recovery disks.

  If this happens, you may need to try this instead:

  You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.

  Other manufacturers recovery DVDs are should not be used for this purpose.

  And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs

  Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:

  "How to do a clean install and configure with a full Version of Vista '

  http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html

  And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.

  And phone Activation may be necessary when you use the above installation method.

  "How to activate Vista normally and by Activation of the phone '

  http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html

  See you soon.

• Qosmio F25: Cannot use the recovery CD - bad CD message appears

  I have a Qosmio F25-AV205. When I tried to use the recovery cd set with my laptop computer, an error message appears saying that I use the wrong cd and this cd is for model F25. Only despite I have the same model that the message...

  What is the problem?

  Someone replace the motherboard of your laptop?
  Sometime, a Toshiba system has had the system board replaced, it may become impossible to image the system using the recovery CD.

  The DMI string contains the model number of the system. When you use a recovery CD to recreate the image on a system, the installation process examines the DMI string and compares this string to the image being restored to ensure that the right image is applied to the correct machine.

  If the DMI string and the label on the image n t game, a bad machine or bad CD message will appear.
  In this case, you should ask the ASP in your country for assistance

• Re: Cannot use the recovery on Satellite L505D partition

  Hello.

  I am trying to help a friend with their Satellite L505D who had a serious virus problem. I wasn't able to run/install programs with the virus on it. I used a Microsoft tool to remove the rootkit trojan, but I always had problems with viruses. I also lost most of the programs on the computer. All folders were empty (except for some games), so I could not access all of the tools in this way. I could not the machine to load any Toshiba restore utility by pressing zero everything with power. I saw some recovery using F8 during the startup options and had a link to restore the original setting of Toshiba, but clicking that choice has done nothing else a break for a few seconds. I waited several minutes, clicked on it again, rebooted and tried. Nothing. As a side note, once all the while, the recovery partition was visible from explorer.exe. Not before or since.

  So I reformatted the computer with a 64-bit Win7 Home Premium Upgrade disk (the partition of restoration by leaving intact) and then enter the key for the system. Supprise, supprise, it asks me to activate within 3 days.

  My basic question is, can I access this partition recovery in a different way to use it? IE copy its contents, or start on some comand prompt to log e:?

  Thanks in advance for your suggestions.

  Hello

  To be clear: there is only one way to use the saved on the HARD drive recovery image and install it.
  Exact description step by step how you can read on http://aps2.toshiba-tro.de/kb0/HTD1303440001R01.htm

  If this does not work, only way to do it anyway is to use the recovery DVDs. It is: has your friend created these disks?

• Re: Portégé R700 - 15 p - cannot use the recovery on SSD 64 GB cd

  Hello

  I replaced my HARD drive to a low size of 64 GB SSD.

  Unfortunately I can not run the recovery cd, he stuck with the error "not enough space".

  I found that I got stuck when he tries to create the DATA partition (for storing the HDDRecovery)

  Any help is appreciated.

  Thank you

  Please don t create all partitions if you want to use the recovery image. Before installation of recovery partitions will be created automatically and recovery image will be copied on SSD automatically too. So please don t do something.

  Launch the installation of recovery, follow the on-screen menu and choose State factory installation.

• Satellite Pro A200-16N: can I use the recovery CD after upgrade to Vista

  HII!

  IM thinking of upgrading to windows vista on my Satellite Pro A200-16N and I ran the pre-upgrade of windows vista from microsoft website and it says that my system will be in charge of windows vista so im ok about it.

  The problem is that if my laptop was to break or something like that at some point, will my recovery CD provided by toshiba to work always on the laptop with windows vista?
  They will return the laptop for windows xp or from my laptop has another operating system they will not work?

  Also...
  What's the deal with BIOS? : S
  I don't understand!
  If I were to upgrade to windows vista should I upgrade my BIOS before or after the upgrade to vista?
  As I download the new drivers before upgrading Yes?

  Thank you!

  The restore CD will of course work.
  The recovery CD will always set the laptop back to the factory settings. This means that the whole HARD drive will be formatted and the image of Toshiba will be installed.

  > What's the deal with BIOS? I put t understand!
  > If I were to upgrade to windows vista should I upgrade my BIOS before or after the upgrade to vista?
  To my knowledge, that this laptop was already shipped with Vista, so you need not update the BIOS if you want to reinstall Vista.

  Some series Satellite A200 needs a BIOS update if you want to use the XP.
  In such cases, it s advisable to upgrade the BIOS to version XP first, then install OS X.

  Best regards

• Satellite M30: Cannot use the recovery CD - this isn't for my unit?

  Hello

  I have a toshiba am and when I tried the recoery cd, a prompt comes out saying that the recovery cd is only for toshiba M30... which is what I have!
  The cd came with the laptop and I've used it before without a problem.
  Can someone tell me what the problem with my laptop?

  Thank you.

  Hmm maybe the DMI contains the name of the laptop bad.
  In this case, recovery cannot be installed because the notebook believes the recovery for a laptop CD.

  In this case, you should ask the service point for the update of DMI