Cannot use the webcam on my Satellite Pro A200

Similar Questions

• Cannot use the webcam on my Satellite A300

  Hello

  I installed Windows 7 Home premium in my laptop (windows Vista there) and since I can't use my webcam.

  It does not appear in Device Manager and I have install and uninstall the drivers of many times but whenever I see the message that says that the camera is either disconnected or destroyed and restart the computer or the camera.

  Is there a way to fix this?
  Thanks in advance...

  My laptop is Satellite A300-20W with PSAGCE-09N00DGE model number and the serial number 29353297Q

  I have the Satellite A300 too with two hard drives inside. Second I ve installed Win7 32 bit and the webcam works perfectly so I m just really wondering what the problem may be.

  You are 100% sure that the webcam works properly with the original Vista recovery image?

• Satellite A300-22F - face recognition cannot use the webcam on Vista 64

  Hello everyone,

  I have a big problem with the recognition of face and my Windows Vista operating system tool.

  Yesterday I installed Windows Vista 64 bit on my new laptop Sat. A300-22F as him preinstalled
  version of Windows was only 32 and I've got 4gig of RAM.

  Thus, all the drivers are installed and everything works. The driver for the webcam with the webcam program works, too.
  But when I run the facial recognition tool, an error that the webcam cannot be initialized or that
  the webcam is in use and cannot be used with the program now.

  So, no program is using the webcam. The webcam works with other tools. And in the settings of the tool face
  are the webcam, but always available, without work.

  Someone at - it an idea?

  I have the drivers of webcam directly from Toshiba.

  Thank you.

  Greetings.

  Hello!

  Start you have programs that use the camera as Skpye or MSN?
  Check it!

  You are using the latest version of the tools and drivers Toshiba? Search on the Toshiba site for an update.
  In addition, I would try to update the BIOS. You can find it on the Toshiba site:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  Good bye

• Cannot use the webcam in hp Omni200 all in one PC

  I have hp omni200 5320il PC AiO... but am unable to use the webcam... Do I have to install drivers?

  Sarbjas1726,

  I want to access the BIOS and check to see if you can reset it.

  1. turn off the computer

  2. as soon as you turn on the computer repeatedly press the F10 key

  3. If you should drive in the BIOS configuration screen

  4. once he look down, lower-right, angle and you will see a guide that will show you what each key

  5. If you see the keys F5 or F9 to load default press the corresponding key

  6. then agree to the prompt that is displayed

  7. Press F10 to save and exit

  If you are able to do so, test to our webcam once return you to the main screen.

  Please answer as soon as possible.

  Thank you

• Cannot use the webcam with chat programs - Satellite A200-AH7 Vista

  Satellite A200-AH7/Vista Home Premim/Chicony USB 2.0 built in webcam

  I can't understand how get the audio works with built in chicony webcam when in a chat program or any program for that matter. I can record audio and reading later, but this isn't what I want to do. It's probably just something stupid that miss me... but any help would sure be appreciated... I tried with Windows Live and Yahoo messenger, and so far all I can do is wave to people LOL. I was never able to get it to work... any ideas?

  Today I bought a Logitech Quickcam for notebooks in case the problem is with the construction in camera. I don't want to install it unless absolutely necessary and think I would need to uninstall the Chicony to make it work... someone can point me in the right direction?

  I just want to be able to talk to my grandchildren...

  Thanks in advance,
  Sue

  Hello

  He is a Canadian for Toshiba laptop model.
  Please see the Toshiba Canada Web site to get the right webcam software:

  http://209.167.114.38/support/TechSupport/ln_TechSupport.asp

  First remove the old webcam software. Reboot the laptop. Clean the registry and the system using the CCleaner (it of free). Reboot the laptop again one and then install the new software of webcam!

  Welcome them

• A satellite - cannot use the webcam - in use by another program?

  Sometimes a reboot works but not very often.

  The camera assistance software says "in use by another program.
  How can I find the other program so I can stop it?
  I already rebooted the software nothing works.

  Reg

  Hello

  The webcam software load automatically at the beginning of the windows to start the procedure. The program mentioned is perhaps the assistant webcam software.
  You can disable this automatic startup in msconfig.
  Type in RUN-> msconfig, go to the Startup tab and disable the webcam software.
  This prevents the start software.

  On the other hand, it could be another tool like Skype, MSN messenger or similar

• Cannot copy the files in my Satellite Pro A210

  I recently removed some files from my satellite pro A210 (don't know if this is related to my problem). I have a Samsung digital camera - when I try to upload photos directly connecting the camera to the laptop, I get an error message that says "cannot read file '-if I remove the card and put it in the holder of the card on the laptop I get nothing. Any help would be appreciated...

  John

  What operating system do you use? Have you full access to the yout phone using the usb connection?

• Cannot use wireless LAN with my Satellite Pro A100

  Toshiba Satellite Pro A100-830
  NETGEAR DG834G

  Can not use the Wi - Fi connection. When you use "Free Config" to find peripheral wireless the popup "this connection is controlled by other software. I don't know what that means and what software controls the connection. I have other laptop which is duly connected by wireless. I'm ok with wired connection.

  I don't know much about the technical aspects and therefore ask for help so any reader can.
  Thank you
  Kris

  > Can't use the Wi - Fi connection. When you use "Free Config" to find peripheral wireless the popup "this connection is controlled by other software.

  You may not use the ConfigFree for configuring Wlan but own Vista configuration options or the WLan configuration tool like Atheros Clint Utility or Intel ProSet utility. It depends on the WLan card which utility can be used.
  Card Intel-> Intel ProSet utility; Card Atheros WLan-> Atheros Clint Utility

  I guess the message + this connection is controlled by other software + appears because one of the above options controls the WLan.

• Cannot use the recovery with my Satellite A100 disc

  I have the Satellite Pro A100 Series, when I boot it up it tells me "Windows could not starte because the following file is missing or corrupt" \WINDOWS\SYSTEM32\CONFIG\SYSTEM
  I tried to restart with the recovery disk in and you press F12 for the boot menu, select CD/DVD and nothing happens.

  Any help or ideas would be great.

  Nothing happens?
  If I understand you well you are not able to boot from the disk? Have you tried another disc? I mean it might be that the recovery disk is noisy or something else.

  Check this box and give us feedback.

• Cannot use recovery DVD with my Satellite Pro A300D

  When I arrived at my laptop set up the way I like it, and I created a recovery disk which took the 2 DVD s.
  Then Vista started to slow down a lot so I decided to use the disc and everything started to go well then he asked for two drive and it came with an error message saying that the file was missing to complete the Setup program couldn't t.

  So now I can t get in the menu to restore it to the State when I had and the disks that I don t work.
  Any help is appreciated.

  Thanks in advance

  Hello buddy

  It is badly located now. Please try to do it once more.
  If the same thing happen there is nothing you can do. I'm not an expert for this kind of thing, but I noticed the image recovery recovery DVD will be copied to the HARD second partition disk) first and then the installation of recovery will go from there.

  If the adaptation procedure is not done on the recovery of end procedure cannot be started.
  Sorry buddy. In my opinion, you can try to contact the nearest authorized maintainer and explain the situation. Take the DVD created as evidence and maybe they will order new media for free.

  Good luck!

• cannot use the webcam or play dvd Windows Inspiron ONE 2320 8.1

  Hello.

  When I open My Webcam Central on my Inspiron One 2320, I get a nice message on the right hand bottom corner 'not supported Webcam. Hmmmmm. When I try to play a DVD, no luck.

  I use Windows 8.1

  I went into the Manager.Under Imaging device, there is no sign of a driver for the webcam.

  In the section DVD, States of CD-ROM/DVD-ROM HL - DT ST DVDRWBDCT40 N does not properly. When I right click to update him pilot-still no worky.

  Thank you for your help!

  Nora

  The webcam is already installed. Central webcam is software and is also already installed. Look at the illustrations in the Quick Start Guide in the list of books below and see that the camera is located on the bezel at the top of the screen has a cover and light. Remove the cover to see if that helps. If you're still having problems, go to this site to help support more-

  www.Dell.com/.../manuals

• Cannot use the Webcam Microphone

  I use Lunbuntu 14.04 LTS 64 bit and I have a Logitech webcam C170. When I do a test call there is no sound at all. I have check that PulseAudio configuration but doesn't ' nt seem to find any problem in the framework. It happens when fresh installed. Only after that I have install VLC media player, the problem to occur. Appreciate those who help.

  After you have installed Skype 4.3 the problem has been resolved. Thank you!

• Cannot use the webcam using Skype

  Original title: Webcam vs. driver problem

  "Webcam test site that has English and Spanish fashion, why my webcam works on Spanish test but English test fails? The camera works, of course, it must be the disk I got with the camera.  I get the voice of Skype contact, but I don't get Visual contact of Skype. I'm not Spanish and there is nothing Spanish downloaded into my computer. Any information will be greatly appreciated. Thank you, GVautour.

  The name of the product: Installshield file Setup.exe VO: 16.0 size 7.34 MB request UVC Driver - V2.79 - 20110902 7520 KB SXJ 14/15 f / #2.0

  Hi GVautour,

  Sorry for the late reply.

  According to the characteristics of the model number of your Acer computer, it seems that your computer does not have a built-in webcam.

  If you use an external device, you can visit the web camera manufacturer's Web site and install the latest driver on your computer.

  If you are unable to find the appropriate link, you can get back to us with the web camera brand and model number.

  Thank you.

• Cannot use option watch on my Satellite Pro P200

  Hello

  I installed XP SP2 on my P200, but he can't go to sleep mode, it says something about a control of parity RAM or something?
  What can be wrong?

  Standby under Vista works fine.

  * Bad operation of the equipment *.
  * Call your provider of equipment for the support
  * nmi: parity check / memory parity error *.
  * The system stopped *.

  Have you updated BIOS version taken WXP supported (5.20)?
  You have installed all the drivers for Windows XP Home edition?

  When you go to START > Shut down option the Standby button is dimmed?
  Explain how you try to use turn on watch and what exactly happens?

• Cannot use the S-video on Satellite A100-906 Vista port

  I can't switch to s-video, as I installed windows Vista and I do not know why.
  I downloaded all the drivers for Vista, but nothing. When I have my original WXP everything. My win vista is an original version, and I don't know what to do.

  Please can someone help me?
  Please send me the solution?

  First of all, it would be necessary to know what laptop you have.

  Second, you should check the options in the properties of the graphics card that could help to activate the external TV output.

  Also the use of the FN + F5 key combination should help to switch to the external display!