Cannot write the french accents by pressing the key

Similar Questions

• When Microsoft Excel loads the following error occurs: Error 1406 Setup cannot write the value in the \xlsx registry key.

  I have Windows XP on a PC, I bought at the beginning of 2009.  I have been using Microsoft Office applications with no problems until now.  When I try to open Excel, the following events occur: 1) a presentation box appears and poster - "Please wait while the window configures Microsoft Office Home and Student 2007.  Collection of the required information.   2nd) another box displays the following message: Error 1406 Setup cannot write the value in the \xlsx registry key.  Make sure you have sufficient permissions to access the registry or contact the Support Services technical Microsoft (PSS) for help.  For more information about how to contact PSS, see PSS10R. CHM.
  3rd, the next area said cancel, start over or ignore.   Retry and ignore just redisplays the same message box again.  When I click Cancel, the following error message is displayed - fatal error during installation.   I do not understand why this is happening since 1) I've been using Excel for quite a while and 2) I'm not trying to install office as it was installed on my PC when it came from the manufacturer (Dell).  Also, I have no problem with the opening of other Office programs.  I am the only user on this computer.  Help, please!  Thank you, Dennis

  Okie dokie.

  Well I dug on the web and found someone with the same problem, and they said that when they have disabled "McAfee VirusScan 8.5 Access Protection", this error has disappeared. If this applies to you, give it a whirl if you wish.

  But the best support that I found came from this website: http://support.microsoft.com/kb/838687. The jist of it is (trying to fix it yourself):
  Fix it myself to fix this problem yourself, follow these steps:

  1. Log the computer by using an administrator user account.
  2. Start Microsoft Windows Explorer.
  3. On the Tools menu, click Folder Options.
  4. Click the view tab.
  5. Under hidden files and folders, click Show hidden folders and files.
  6. Clear the Hide extensions for known file types check box, and then click OK.
  7. Open the following folder: C:\Documents and Settings\All Users\Application Data\Microsoft\Office\Data\
  8. If you are running Office 2003, right-click Opa11.dat, and then click Properties. If you are running Office XP, right-click Data.dat, and then click Properties.
  9. Click the Security tab.
  10. Click Advanced.
  11. Click the permissions tab.
  12. Click to select everyone in the list entered permissions and then click change.
  13. Click to select the full control check box.
  14. Click OK three times. If these steps do not resolve this issue, delete the Opa11.dat file or the Data.dat file in the following folder and then restart an Office 2003 program or an Office XP program:
      C:\Documents and Settings\All Users\Application Data\Microsoft\Office\Data

      If this does not work for you, I would take my installation CD< completely="" uninstall="" microsoft="" excel="" (or="" any="" other="" problems="" that="" are="" giving="" you="" this="" error),="" then="" install="" microsoft's="" windows="" installer="" cleanup="" utility="" (which="" completely="" removes="" all="" stuff="" pertaining="" to="" whichever="" program="" you="" delete,="" for="" you,="" excel)="" and="" then="" reinstall="" microsoft="" excel.="" this="" utility="" program="" is="" really="" powerful,="" and="" you="" can="" download="" your="" copy="" from="">http://support.microsoft.com/kb/290301.

      So, here are three options for you to try. I hope one works for you - let me know it to be.

  -Carson

  P.S. - KC Chiefs? Colts all the way! :)

• I'm not able to install illustrator creative cloud CC. This is the error when I download creative cloud app. "Cannot write the registry value. "Verify permissions, and then try again.

  I'm not able to install illustrator creative cloud CC. This is the error when I download creative cloud app. "Cannot write the registry value. "Verify permissions, and then try again.

  No one can tell you anything without the info adequate system or other technical details, including the exact error message.

  Mylenium

• I just downloaded today 21/09/12 the Microsoft Home Student 2010 trial, but I forgot to write the key number. What should I do to fix this 3r.

  Gretings,

  Please need help here.

  I just downloaded today 21/09/12 Microsoft for home Studen 2010 Trial, but I forgot to write the key number.   I would like to try this software to see if it will work for me or not.  What should I do to get a product key?

  Thank you...

  When you register for the trial, the product key must have been sent to you. Check your Inbox or junk folder. Product key should also be a part of the Setup file to install the trial version.

• Error-2625 cannot write the file call node in NI_XML.lvlib:Save.vi

  I get this error when you perform a certain acquisition with a CoolSnap HQ2. The user defines its parameters, then these settings are saved in the file so that they can be easily identified later in the database. The error came to us when we did a test with 4 different parameters. We did: Laser X w / filter X; Laser X w / filter Y. Laser Y w / filter X; Laser Y w / filter Y.

  The first and the third is saved without errors, but the second and fourth receive errors.

  Error-2625 cannot write file call node in NI_XML.lvlibave.vi

  Someone has an idea, what happens? This is the vi I'm talking about.

  I forgot to mention that the name of filter attribute is 593/LP, could the "/" be the cause?

  

  Found the solution. It is indeed the "/" in the name of the filter that caused the problem. I replaced it with a '-' and everything worked

• "": Blu - ray device error "', '3' Code, note:" CreateStcSequence: cannot write the file of the M25. "

  I get this error message about 11 GB when burning a 22 GB Blu - ray. «Blu - ray error: "device error", the '3' Code, note: "CreateStcSequence: cannot write file M25.»» I tried almost everything as administrator, starting a new project and change the disc. I use CS6 and mad... any ideas?

  It worked for me! I built my project to a blu - ray image, then burned a disk from the image without any problems. Maybe it's that you must try then too!

• Cannot write the FFT of the integrated double data

  I am a beginner to Labview environment.
  I have acceleration Vs time dat file .lvm
  Can I get the double integration of this
  acceleration data for trip data.
  Can I get FFT of displacement and displayed on the graph.
  Up to this point VI works
  But now if I connect this FFT of moving to 'write the measurement file' then it displays error.
  Please help me... and correct the error...  All I want is two column data, frequency and

  the other of the amplitude of movement.
  I have attached all files
  I ask you to correct the VI please...
  Thanking you!

  The concepts that you'll want to research are"matrices", "indexing of tables", 'automatic indexing', 'cluster' and 'type of waveform data'.

  The loop IN the first VI I sent used the automatic indexation to take each element of a table 1 d of the clusters and perform operations on them separately to convert them to a waveform.  Exit tunnel also uses automatic indexing so that the end result is a table 1 d of waveforms.  I used the loop, so that no matter how many items appear in the table, you get a corresponding number of signals to the "writing on a file of measures."

  In this case, because the output of the FRF is a single cluster (and not an array of clusters), the loop FOR was not necessary.  The VI attached this time takes the output of cluster of FRF and maps the cluster to a single components build the wave function and you get a result of unique waveform.

  I have no sound and Vibe loaded on my computer at the moment, so I can't run your VI and see the result of the integration of the snout to the Cloaca VI.  The output data type is "Table 1 d of waveform" and your indicator and your two FRF can accept only waveforms.  I put a function between integration and the indicator/FRF array index, but if there is more than one waveform in the table, it would be the wrong solution.  My solution corrects the broken wires but throws waveforms 2,3,4... If they exist.

• Cannot write the file in the destination folder.

  Installed the new printer of brothers. PDF (file) scanning to e-mail could sweep old printer. Error code (CC3-103-00030302). Says "failed to write the file in 'Destination folder',

  Got, it works.  Here are some things I've done.  I'm sure that some of them are useless holes to leave open, but its not working.  These settings can be removed that time to identify exactly what is required to have fixed.

  Windows 7 64-bit Brother MFC-J615W network Scan to Setup

  1 open the windows firewall ports UDP 137, 54925 & 54926

  2. set the read/write for the guests and users permissions

  3. uninstall/reinstall

  4. in CC3 configuration of SCANNING has two tabs; a device and software.  You must pay attention to the directory/s you want to use.

  Now, I am very satisfied with this printer.  This is my first brother and I don't think that the last to the first impression.  I have now this printer works wirelessly with a Ubuntu Netbook Remix, a MacBook 10.5 OS and Windows 7 64-bit.

  * I am also able to scan in PDF without problem.

  See you soon

• Write the key (path)

  I am developing a few screws that use Configuration (.ini) files in a Windows environment.  My problem is that writing a Windows file results of path in an entry in the C/Folder/File.dat form (form C:\Folder\File.dat).  Finally, there is an internal routine specific path to the common path which translates the paths of files Windows this version "oblique".  I start with a Configuration file which paths are in the 'Windows' format and want to create an output as file in "Windows" (not common) format.  [Turns out that the reading of a key (Path) has a common path to specific path VI "reformat" it, but if the format is already specific or Windows, the path, it will "pass through" unchanged, as it should].

  One solution, of course, is to recode the VI NOR myself, but this seems a bit excessive to me.  Someone at - it suggestions?  [Ooh, I don't think OpenG...]

  BS

  There is an entry in the key to write (String) VI which is ' chain brute writing? If you set this TRUE, it will write the string without the double-backslashes. Similarly, you have to wire a TRUE to the setting "read the raw string?" press the read (String) VI.

• Cannot find the @ key in keyboard Tecra A10 - 11 M

  Hi all

  I try to use @ button placed in where is 2, but I can't find the special function or the key combination to enable this.

  Any help will be greatly appreciated.

  Thank you

  John

  Hello

  What do we do with keyboard language you chose?
  Generally the layout of the English (British) should allow the @ by pressing the combination of keys SHIFT and 2.

• I'm having hard to the installation of an update of Lightroom (4.4) on my PC. It is said that he cannot access the key. Any suggestions?

  It works through the Assistant/Installer together and said so at the end he cannot access/find the key. Don't know what to do. Thank you!

  update by downloading the files directly and then apply them: http://www.adobe.com/downloads/updates/

• Cannot read the KEY for the installation of the recovery disc.

  My Toshiba Satellite has crashed and I have used the recovery disk provided to re - install.  It asks for the product key, but I can't read it on the underside of the computer.  How can I get the key while I am legal with this OS?

  Thank you

  Joe

  If you use the appropriate manufacturer recovery system, there is a key (key OEM_SLP) built in work and you should not need the key to the sticker.

• Cannot save the keys

  Hello!

  I had the keys and successfully saved. But something went wrong and I did not create debugging token: could not decrypt key file error.

  So I got new keys. But unable to save:

  Error: Already registered with RDK

  Error: Already registered with COMINCO

  Do I have to make some changes in order to register new keys?

  Thank you

  Ahmet

  At the bottom of the following document, you can find where are saved the files author.p12, barsigner.db and barsigner.csk depending on your operating system:

  https://developer.BlackBerry.com/HTML5/documentation/signing_setup_bb10_apps_2008396_11.html

  My recommendation would be:

  • Rename the file author.p12 to something else and try to generate a new author.p12 from the command line with a keystore password that corresponds to your code signing password:

  blackberry-keytool -genkeypair -storepass  -dname "cn="
  

  • If you still see issues, rename all existing author.p12, barsigner.db and barsigner.csk files to something else. This will essentially "delete" your signature keys, allowing you to save your new SJC files.

• Purchased from Microsoft Genuine = line and cannot get the key?

  I was surfing the net and told my software could be counterfeited and click here to fix... I ended up paying 117.00 for bad software, I called back as soon as I couldn't get the key, they gave me. and no one knew what I was talking about! I was on the phone for 3 hours! first tech support then microsoft store then back to technical support... I'm so frustrated! initially they sent me the key to download, but for some reason the e-mail has been removed, (Murphys Law) all how I received the diskette by post and downloaded to change my operating system win 7 ultimate for XP Home, now. but after installation it asked for the key? I don't have the key and does not come with the disc just a letter thanking me for buying and tell me to get the key from the email they sent me... I do not HAVE email, it has been deleted... What can I do? I'm lost... when I called microsoft they asked me my e-mail address to look up and they said there is no record that the e-mail... How can this be >? Please help me.

  You have been bitten by a crook.

  J W Stuart: http://www.pagestart.com

• Cannot find the key of windows 8, with media Center installed

  Complicated. I downloaded and installed Windows 8 Pro (Windows 7 upgrades) on several machines at home and took the Pack of Media Center that would free. For one of these facilities, I lost the emails with the product key of Windows 8 and library pack. Now the computer has problems and I want to reinstall Windows. When I try to do it via the settings, it says that he has given missing and I have to put in the backup media. I created this earlier, but it is not recognized by the computer. So I think the best way is to download Windows 8 on the Internet and enter the key again.

  I have tried various key finders (Belarc, Nirsoft) and that they find a key, but it seems that it is only the Media Centre Pack button. I emailed Support and they said that I need the product key of Windows 8 original.

  Anyone with the library could find their Windows product key?

  Summary order Page: https://www.mswos.com/
  To view the details of your order, please enter your order number,
  last name, address and country, as well as the code shown below.

  Also try the Microsoft Store
  Microsoft Store sales and Support:
  http://www.microsoftstore.com/store/msusa/en_US/DisplayHelpContactUsPage/ThemeID.33363200/

  J W Stuart: http://www.pagestart.com